This change simplifies the CRI plugin dependencies by not requiring the
CRI image plugin to depend on any other CRI components. Since other CRI
plugins depend on the image plugin, this allows prevents a dependency
cycle for CRI configurations on a base plugin.
Signed-off-by: Derek McGowan <derek@mcg.dev>
Prepares the CRI image service for splitting CRI into multiple plugins.
Also prepares for config migration which will spread across multiple
different plugins.
Signed-off-by: Derek McGowan <derek@mcg.dev>
To break the cyclic dependency of cri plugin and podsandbox plugin,
we define a new plugin type of SandboxesServicePlugin and when cri init
it's own client, it will add the all the controllers by get them from
the SandboxesServicePlugin.
when podsandbox controller init it's client, it will not Require the
SandboxesServicePlugin.
Signed-off-by: Abel Feng <fshb1988@gmail.com>
Avoid calling out to the client to get a sandbox controller and instead
setup the list of controllers on initialization. This fixes a test
failure which does not set the client.
Signed-off-by: Derek McGowan <derek@mcg.dev>
Enhance cri/server/image/imagefs_info.go:ImageFsInfo() to support
snapshotter per runtime. Now `ImageFsInfoResponse.ImageFilesystems` may
contain multiple entries.
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
make containerd extensible to support more sandbox controllers
registered into containerd by config.
we change the default sandbox controller plugin's name from "local" to "shim".
to make sure we can get the controller by the plugin name it registered into
containerd.
Signed-off-by: Abel Feng <fshb1988@gmail.com>
Before snapshotter per runtime, CRI only supports a global snapshotter.
So a snapshot can be uniquely identified by `snapshot_key`. With snapshotter
per runtime enabled, there may be multiple snapshotters used by CRI. So only
(snapshotter_id, snapshot_key) can uniquely identify a snapshot.
Also extends CRI/store/snapshot/Store to support multiple snapshotters.
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
The plugins packages defines the plugins used by containerd.
Move all the types and properties to this package.
Signed-off-by: Derek McGowan <derek@mcg.dev>
In the CRI server initialization a syncgroup is setup that adds to the
counter for every cni config found/registered. This functions on platforms
where CNI is supported/theres an assumption that there will always be
the loopback config. However, on platforms like Darwin where there's generally
nothing registered the Wait() on the syncgroup returns immediately and the
channel used to return any Network config sync errors is closed. This channel
is one of three that's used to monitor if we should Close the CRI service in
containerd, so it's not great if this happens.
Signed-off-by: Danny Canter <danny@dcantah.dev>
Split out the criService-agnostic bits of nri-api* from
pkg/cri/server to pkg/cri/nri to allow sharing a single
implementation betwen the server and sbserver versions.
Rework the interfaces to not require access to package
internals.
Signed-off-by: Krisztian Litkey <krisztian.litkey@intel.com>
Implement the adaptation interface required by the NRI
service plugin to handle CRI sandboxes and containers.
Hook the NRI service plugin into CRI request processing.
Signed-off-by: Krisztian Litkey <krisztian.litkey@intel.com>
Remove nolint-comments that weren't hit by linters, and remove the "structcheck"
and "varcheck" linters, as they have been deprecated:
WARN [runner] The linter 'structcheck' is deprecated (since v1.49.0) due to: The owner seems to have abandoned the linter. Replaced by unused.
WARN [runner] The linter 'varcheck' is deprecated (since v1.49.0) due to: The owner seems to have abandoned the linter. Replaced by unused.
WARN [linters context] structcheck is disabled because of generics. You can track the evolution of the generics support by following the https://github.com/golangci/golangci-lint/issues/2649.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- fix "nolint" comments to be in the correct format (`//nolint:<linters>[,<linter>`
no leading space, required colon (`:`) and linters.
- remove "nolint" comments for errcheck, which is disabled in our config.
- remove "nolint" comments that were no longer needed (nolintlint).
- where known, add a comment describing why a "nolint" was applied.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Background:
With current design, the content backend uses key-lock for long-lived
write transaction. If the content reference has been marked for write
transaction, the other requestes on the same reference will fail fast with
unavailable error. Since the metadata plugin is based on boltbd which
only supports single-writer, the content backend can't block or handle
the request too long. It requires the client to handle retry by itself,
like OpenWriter - backoff retry helper. But the maximum retry interval
can be up to 2 seconds. If there are several concurrent requestes fo the
same image, the waiters maybe wakeup at the same time and there is only
one waiter can continue. A lot of waiters will get into sleep and we will
take long time to finish all the pulling jobs and be worse if the image
has many more layers, which mentioned in issue #4937.
After fetching, containerd.Pull API allows several hanlers to commit
same ChainID snapshotter but only one can be done successfully. Since
unpack tar.gz is time-consuming job, it can impact the performance on
unpacking for same ChainID snapshotter in parallel.
For instance, the Request 2 doesn't need to prepare and commit, it
should just wait for Request 1 finish, which mentioned in pull
request #6318.
```text
Request 1 Request 2
Prepare
|
|
|
| Prepare
Commit |
|
|
|
Commit(failed on exist)
```
Both content backoff retry and unnecessary unpack impacts the performance.
Solution:
Introduced the duplicate suppression in fetch and unpack context. The
deplicate suppression uses key-mutex and single-waiter-notify to support
singleflight. The caller can use the duplicate suppression in different
PullImage handlers so that we can avoid unnecessary unpack and spin-lock
in OpenWriter.
Test Result:
Before enhancement:
```bash
➜ /tmp sudo bash testing.sh "localhost:5000/redis:latest" 20
crictl pull localhost:5000/redis:latest (x20) takes ...
real 1m6.172s
user 0m0.268s
sys 0m0.193s
docker pull localhost:5000/redis:latest (x20) takes ...
real 0m1.324s
user 0m0.441s
sys 0m0.316s
➜ /tmp sudo bash testing.sh "localhost:5000/golang:latest" 20
crictl pull localhost:5000/golang:latest (x20) takes ...
real 1m47.657s
user 0m0.284s
sys 0m0.224s
docker pull localhost:5000/golang:latest (x20) takes ...
real 0m6.381s
user 0m0.488s
sys 0m0.358s
```
With this enhancement:
```bash
➜ /tmp sudo bash testing.sh "localhost:5000/redis:latest" 20
crictl pull localhost:5000/redis:latest (x20) takes ...
real 0m1.140s
user 0m0.243s
sys 0m0.178s
docker pull localhost:5000/redis:latest (x20) takes ...
real 0m1.239s
user 0m0.463s
sys 0m0.275s
➜ /tmp sudo bash testing.sh "localhost:5000/golang:latest" 20
crictl pull localhost:5000/golang:latest (x20) takes ...
real 0m5.546s
user 0m0.217s
sys 0m0.219s
docker pull localhost:5000/golang:latest (x20) takes ...
real 0m6.090s
user 0m0.501s
sys 0m0.331s
```
Test Script:
localhost:5000/{redis|golang}:latest is equal to
docker.io/library/{redis|golang}:latest. The image is hold in local registry
service by `docker run -d -p 5000:5000 --name registry registry:2`.
```bash
image_name="${1}"
pull_times="${2:-10}"
cleanup() {
ctr image rmi "${image_name}"
ctr -n k8s.io image rmi "${image_name}"
crictl rmi "${image_name}"
docker rmi "${image_name}"
sleep 2
}
crictl_testing() {
for idx in $(seq 1 ${pull_times}); do
crictl pull "${image_name}" > /dev/null 2>&1 &
done
wait
}
docker_testing() {
for idx in $(seq 1 ${pull_times}); do
docker pull "${image_name}" > /dev/null 2>&1 &
done
wait
}
cleanup > /dev/null 2>&1
echo 3 > /proc/sys/vm/drop_caches
sleep 3
echo "crictl pull $image_name (x${pull_times}) takes ..."
time crictl_testing
echo
echo 3 > /proc/sys/vm/drop_caches
sleep 3
echo "docker pull $image_name (x${pull_times}) takes ..."
time docker_testing
```
Fixes: #4937Close: #4985Close: #6318
Signed-off-by: Wei Fu <fuweid89@gmail.com>
