Automatic merge from submit-queue (batch tested with PRs 43005, 46660, 46385, 46991, 47103)
[gke-slow always fails] Defer DeleteGCEStaticIP before asserting error
From https://github.com/kubernetes/kubernetes/issues/46918.
I'm getting close to the root cause: During tests, CreateGCEStaticIP() in fact successfully created static IP, but the parser we wrote in test mistakenly think we failed, probably because the gcloud output format was changed recently (or not). I'm still looking into fixing that.
This PR defer the delete function before asserting the error so that we can stop consistently leaking static IP in every run.
/assign @krzyzacy @dchen1107
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 43005, 46660, 46385, 46991, 47103)
add e2e node test for Pod hostAliases feature
**What this PR does / why we need it**: adds node e2e test for #45148
tests requested in https://github.com/kubernetes/kubernetes/issues/43632#issuecomment-298434125
**Release note**:
```release-note
NONE
```
@yujuhong @thockin
Automatic merge from submit-queue
Federation: create loadbalancer service in tests only if test depends on it
**What this PR does / why we need it**:
Creating LoadBalancer type of service for every test case is kind of expensive and time consuming to provision. So this PR changes the test cases to use LoadBalancer type services only when necessary.
**Which issue this PR fixes** (optional, in fixes #<issue number>(, fixes #<issue_number>, ...) format, will close that issue when PR gets merged): fixes#47068
**Release note**:
```release-note
NONE
```
cc @kubernetes/sig-federation-pr-reviews
/assign @madhusudancs
Automatic merge from submit-queue (batch tested with PRs 46977, 47005, 47018, 47061, 46809)
Directly grab map values instead of using loop-clause variables when setting up federated sync controller tests.
Go's loop-clause variables are allocated once and the items are copied to that variable while iterating through the loop. This means, these variables can't escape the scope since closures are bound to loop-clause variables whose value change during each iteration. Doing so would lead to undesired behavior. For more on this topic see: https://github.com/golang/go/wiki/CommonMistakes
So in order to workaround this problem in sync controller e2e tests, we iterate through the map and copy the map value to a variable inside the loop before using it in closures.
Fixes issue: #47059
**Release note**:
```release-note
NONE
```
/assign @marun @shashidharatd @perotinus
cc @csbell @nikhiljindal
/sig federation
Automatic merge from submit-queue (batch tested with PRs 46977, 47005, 47018, 47061, 46809)
Fix for cluster-autoscaler e2e failures
This may help with cluster-autoscaler e2e failing in setup if the tests are run before all machines in mig get fully ready.
Automatic merge from submit-queue (batch tested with PRs 46235, 44786, 46833, 46756, 46669)
implements StatefulSet update
**What this PR does / why we need it**:
1. Implements rolling update for StatefulSets
2. Implements controller history for StatefulSets.
3. Makes StatefulSet status reporting consistent with DaemonSet and ReplicaSet.
https://github.com/kubernetes/features/issues/188
**Special notes for your reviewer**:
**Release note**:
```release-note
Implements rolling update for StatefulSets. Updates can be performed using the RollingUpdate, Paritioned, or OnDelete strategies. OnDelete implements the manual behavior from 1.6. status now tracks
replicas, readyReplicas, currentReplicas, and updatedReplicas. The semantics of replicas is now consistent with DaemonSet and ReplicaSet, and readyReplicas has the semantics that replicas did prior to this release.
```
Automatic merge from submit-queue (batch tested with PRs 46235, 44786, 46833, 46756, 46669)
Fixed ResourceConsumer.CleanUp to properly clean up non-replication-controller resources and pods
**What this PR does / why we need it**: Without this fix CleanUp does not remove non-replication-controller resources and pods. This leads to pollution that in some cases inadvertently affects what is happening in AfterEachs before the namespace gets deleted.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 46997, 47021)
Don't parse human-readable output from gcloud in tests
This is the reason `[k8s.io] Services should be able to change the type and ports of a service [Slow]` is currently failing on GKE e2e tests. For GKE jobs we run a prerelease version of gcloud, in which the default command output was changed.
gcloud's default output for commands is human readable, and is subject to change. Anything scripting against gcloud should always pass `--format=json|yaml|value(...)` so you get standardized output.
fixes: #46918
Automatic merge from submit-queue (batch tested with PRs 47083, 44115, 46881, 47082, 46577)
Add an e2e test for server side get
Print a better error from the response. Performs validation to ensure it
does not regress in alpha state.
This is tests and bug fixes for https://github.com/kubernetes/community/pull/363
@kubernetes/sig-api-machinery-pr-reviews
Implements history utilities for ControllerRevision in the controller/history package
StatefulSetStatus now has additional fields for consistency with DaemonSet and Deployment
StatefulSetStatus.Replicas now represents the current number of createdPods and StatefulSetStatus.ReadyReplicas is the current number of ready Pods
Automatic merge from submit-queue (batch tested with PRs 46718, 46828, 46988)
Update docs/ links to point to main site
**What this PR does / why we need it**:
This updates various links to either point to kubernetes.io or to the kubernetes/community repo instead of the legacy docs/ tree in k/k
Pre-requisite for #46813
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
@kubernetes/sig-docs-maintainers @chenopis @ahmetb @thockin
Go's loop-clause variables are allocated once and the items are copied
to that variable while iterating through the loop. This means, these
variables can't escape the scope since closures are bound to loop-clause
variables whose value change during each iteration. Doing so would lead
to undesired behavior. For more on this topic see:
https://github.com/golang/go/wiki/CommonMistakes
So in order to workaround this problem in sync controller e2e tests, we
iterate through the map and copy the map value to a variable inside the
loop before using it in closures.
Fixes issue: #47059
This commit includes the following two changes:
* Move pre-test checks (pods/nodes ready) to BeforeEach() so that it's
clear whether the test has run or not.
* Dumping logs for unready pods.
Automatic merge from submit-queue (batch tested with PRs 46897, 46899, 46864, 46854, 46875)
Wait for cloud-init to finish before starting tests.
This fixes#46889.
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
Avoid double printing output of gcloud commands in kubemark
Just noticed we were unnecessarily echoing the result again.
/cc @wojtek-t
Automatic merge from submit-queue
Add EmptyDir volume capacity isolation
This PR adds the support for isolating the emptyDir volume use. If user
sets a size limit for emptyDir volume, kubelet's eviction manager monitors its usage
and evict the pod if the usage exceeds the limit.
This feature is part of local storage capacity isolation and described in the proposal kubernetes/community#306
**Release note**:
```release-note
Alpha feature: allows users to set storage limit to isolate EmptyDir volumes. It enforces the limit by evicting pods that exceed their storage limits
```
Automatic merge from submit-queue (batch tested with PRs 44883, 46836, 46765, 46683, 46050)
Added Bind method to Scheduler Extender
- only one extender can support the bind method
- if an extender supports bind, scheduler delegates the pod binding to the extender
**What this PR does / why we need it**:
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#41235
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue (batch tested with PRs 46972, 42829, 46799, 46802, 46844)
Multizone static pv test
**What this PR does / why we need it**:
Adds an e2e test for checking that pods get scheduled to the same zone as statically created PVs. This tests the PersistentVolumeLabel admission controller, which adds zone and region labels when PVs are created. As part of this, I also had to make changes to volume test utility code to pass in a zone parameter for creating PDs, and also had to add an argument to the e2e test program to accept a list of zones.
Fixes#46995
**Special notes for your reviewer**:
It's probably easier to review each commit separately.
**Release note**:
NONE
Automatic merge from submit-queue (batch tested with PRs 46550, 46663, 46816, 46820, 46460)
[GCE] Support internal load balancers
**What this PR does / why we need it**:
Allows users to expose K8s services externally of the K8s cluster but within their GCP network.
Fixes#33483
**Important User Notes:**
- This is a beta feature. ILB could be enabled differently in the future.
- Requires nodes having version 1.7.0+ (ILB requires health checking and a health check endpoint on kube-proxy has just been exposed)
- This cannot be used for intra-cluster communication. Do not call the load balancer IP from a K8s node/pod.
- There is no reservation system for private IPs. You can specify a RFC 1918 address in `loadBalancerIP` field, but it could be lost to another VM or LB if service settings are modified.
- If you're running an ingress, your existing loadbalancer backend service must be using BalancingMode type `RATE` - not `UTILIZATION`.
- Option 1: With a 1.5.8+ or 1.6.4+ version master, delete all your ingresses, and re-create them.
- Option 2: Migrate to a new cluster running 1.7.0. Considering ILB requires nodes with 1.7.0, this isn't a bad idea.
- Option 3: Possible migration opportunity, but use at your own risk. More to come later.
**Reviewer Notes**:
Several files were renamed, so github thinks ~2k lines have changed. Review commits one-by-one to see the actual changes.
**Release note**:
```release-note
Support creation of GCP Internal Load Balancers from Service objects
```
Handle failure cases on startup gracefully to avoid causing cascading
errors and poor initialization in other components. Initial errors from
config load cause the initializer to pause and hold requests. Return
typed errors to better communicate failures to clients.
Add code to handle two specific cases - admin wants to bypass
initialization defaulting, and mirror pods (which want to bypass
initialization because the kubelet owns their lifecycle).
This PR adds two features:
1. add support for isolating the emptyDir volume use. If user
sets a size limit for emptyDir volume, kubelet's eviction manager
monitors its usage
and evict the pod if the usage exceeds the limit.
2. add support for isolating the local storage for container overlay. If
the container's overly usage exceeds the limit defined in container
spec, eviction manager will evict the pod.
An annotation in the pod spec of the form:
podpreset.admission.kubernetes.io/exclude: "true"
Will cause the admission controller to skip manipulating the pod spec,
no matter the labelling.
The annotation for a podpreset acting on a pod has also been slightly
modified to contain a podpreset prefix:
podpreset.admission.kubernetes.io/podpreset-{name} = resource version
Fixes#44161
Automatic merge from submit-queue (batch tested with PRs 45871, 46498, 46729, 46144, 46804)
PD e2e test: Ready node check now uses the most up-to-date node count.
Follow-up to PR #46746
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
