Automatic merge from submit-queue (batch tested with PRs 44727, 45409, 44968, 45122, 45493)
Separate healthz server from metrics server in kube-proxy
From #14661, proposal is on kubernetes/community#552.
Couple bullet points as in commit:
- /healthz will be served on 0.0.0.0:10256 by default.
- /metrics and /proxyMode will be served on port 10249 as before.
- Healthz handler will verify timestamp in iptables mode.
/assign @nicksardo @bowei @thockin
**Release note**:
```release-note
NONE
```
- /healthz will be served on 0.0.0.0:10256 by default.
- /metrics and /proxyMode will be served on port 10249
as before.
- Healthz handler will verify timestamp in iptables mode.
Automatic merge from submit-queue
Edge-based userspace LB in kube-proxy
@thockin @bowei - if one of you could take a look if that PR doesn't break some basic kube-proxy assumptions. The similar change for winuserproxy should be pretty trivial.
And we should also do that for iptables, but that requires splitting the iptables code to syncProxyRules (which from what I know @thockin already started working on so we should probably wait for it to be done).
Automatic merge from submit-queue
Restore "Setting endpoints" log message
**What this PR does / why we need it**:
The "Setting endpoints" message from kube-proxy at high verbosity was
lost as part of a larger simplification in kubernetes/kubernetes#42747.
This change brings it back, simply outputting the just-constructed
addresses list.
I need this message to monitor delays in propagating endpoints changes across nodes.
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 43871, 44053)
Proxy healthchecks overhaul
The first commit is #44051
These three commits are tightly coupled, but should be reviewed one-by-one. The first adds tests for healthchecks, and found a bug. The second basically rewrites the healthcheck pkg to be much simpler and less flexible (since we weren't using the flexibility). The third tweaks how healthchecks are handled in endpoints-path to be more like they are in services-path.
@MrHohn because I know you were in here for source-IP GA work.
@wojtek-t
The "Setting endpoints" message from kube-proxy at high verbosity was
lost as part of a larger simplification in kubernetes/kubernetes#42747.
This change brings it back, simply outputting the just-constructed
addresses list.
Automatic merge from submit-queue
kube-proxy: filter INPUT as well as OUTPUT
We need to apply filter rules on the way in (nodeports) and out (cluster
IPs). Testing here is insufficient to have caught this - will come back
for that.
Fixes#43969
@justinsb since you have the best repro, can you test? It passes what I think is repro.
@ethernetdan we will want this in 1.6.x
```release-note
Fix bug with service nodeports that have no backends not being rejected, when they should be. This is not a regression vs v1.5 - it's a fix that didn't quite fix hard enough.
```
The existing healthcheck lib was pretty complicated and was hiding some
bugs (like the count always being 1), This is a reboot of the interface
and implementation to be significantly simpler and better tested.
Adding test cases for HC updates found a bug with an update that
simultaneously removes one port and adds another. Map iteration is
randomized, so sometimes no HC would be created.
We need to apply filter rules on the way in (nodeports) and out (cluster
IPs). Testing here is insufficient to have caught this - will come back
for that.
We don't need the svcPortToInfoMap. Its only purpose was to
send "valid" local endpoints (those with valid IP and >0 port) to the
health checker. But we shouldn't be sending invalid endpoints to
the health checker anyway, because it can't do anything with them.
If we exclude invalid endpoints earlier, then we don't need
flattenValidEndpoints().
And if we don't need flattenValidEndpoints() it makes no sense to have
svcPortToInfoMap store hostPortInfo, since endpointsInfo is the same
thing as hostPortInfo except with a combined host:port.
And if svcPortToInfoMap now only stores valid endpointsInfos, it is
exactly the same thing as newEndpoints.
This changes the userspace proxy so that it cleans up its conntrack
settings when a service is removed (as the iptables proxy already
does). This could theoretically cause problems when a UDP service
as deleted and recreated quickly (with the same IP address). As
long as packets from the same UDP source IP and port were going to
the same destination IP and port, the the conntrack would apply and
the packets would be sent to the old destination.
This is astronomically unlikely if you did not specify the IP address
to use in the service, and even then, only happens with an "established"
UDP connection. However, in cases where a service could be "switched"
between using the iptables proxy and the userspace proxy, this case
becomes much more frequent.
This makes it more obvious that they run together and makes the upcoming
rate-limited syncs easier.
Also make test use ints for ports, so it's easier to see when a port is
a literal value vs a name.
This is a weird function, but I didn't want to change any semantics
until the tests are in place. Testing exposed one bug where stale
connections of renamed ports were not marked stale.
There are other things that seem wrong here, more will follow.
Move the feature test to where we are activating the feature, rather
than where we detect locality. This is in service of better tests,
which is in service of less-frequent resyncing, which is going to
require refactoring.
Instead of copying the map, like OnServicesUpdate() used to do and which
was copied into buildServiceMap() to preserve semantics while creating
testcases, start with a new empty map and do deletion checking later.
The API docs say:
// ServiceTypeExternalName means a service consists of only a reference to
// an external name that kubedns or equivalent will return as a CNAME
// record, with no exposing or proxying of any pods involved.
which implies that ExternalName services should be ignored for proxy
purposes.
Automatic merge from submit-queue (batch tested with PRs 35884, 37305, 37369, 37429, 35679)
fix mixleading warning message regarding kube-proxy nodeIP initializa…
The current warning message implies that the operator should restart kube-proxy with some flag related to node IP which can be very misleading.
Automatic merge from submit-queue
Change stickyMaxAge from seconds to minutes, fixes issue #35677
**What this PR does / why we need it**: Increases the service sessionAfinity time from 180 seconds to 180 minutes for proxy mode iptables which was a bug introduced in a refactor.
**Which issue this PR fixes**: fixes#35677
**Special notes for your reviewer**:
**Release note**:
``` release-note
Fixed wrong service sessionAffinity stickiness time from 180 sec to 180 minutes in proxy mode iptables.
```
Since there is no test for the sessionAffinity feature at the moment I wanted to create one but I don't know how.
Automatic merge from submit-queue
Add kubelet --network-plugin-mtu flag for MTU selection
* Add network-plugin-mtu option which lets us pass down a MTU to a network provider (currently processed by kubenet)
* Add a test, and thus make sysctl testable
bridge-nf-call-iptables appears to only be relevant when the containers are
attached to a Linux bridge, which is usually the case with default Kubernetes
setups, docker, and flannel. That ensures that the container traffic is
actually subject to the iptables rules since it traverses a Linux bridge
and bridged traffic is only subject to iptables when bridge-nf-call-iptables=1.
But with other networking solutions (like openshift-sdn) that don't use Linux
bridges, bridge-nf-call-iptables may not be not relevant, because iptables is
invoked at other points not involving a Linux bridge.
The decision to set bridge-nf-call-iptables should be influenced by networking
plugins, so push the responsiblity out to them. If no network plugin is
specified, fall back to the existing bridge-nf-call-iptables=1 behavior.
This allows us to use the MARK-MASQ chain as a subroutine, rather than encoding
the mark in many places. Having a KUBE-POSTROUTING chain means we can flush
and rebuild it atomically. This makes followon work to change the mark
significantly easier.
