Automatic merge from submit-queue
Print conditions of RC/RS in 'kubectl describe' command
**What this PR does / why we need it**:
If conditions of RC/RS exist, print them in 'kubectl describe' command.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
Print conditions of RC/RS in 'kubectl describe' command.
```
We were comparing the address of the old and new RC.spec.replicas and we
have to compare the values. This only affects logging.
Update RS controller to match RC controller to log when spec.replicas
changes, not status.replicas.
Automatic merge from submit-queue (batch tested with PRs 41498, 44487)
Use len of pods in stateful set error
**What this PR does / why we need it**:
Sync stateful set reports wrong error, we need to fix it.
**Release note**:
```release-note
`NONE`
```
Automatic merge from submit-queue
cinder: Add support for the KVM virtio-scsi driver
**What this PR does / why we need it**:
The VirtIO SCSI driver for KVM changes the way disks appear in /dev/disk/by-id.
This adds support for the new format.
Without this, volume attaching on an openstack cluster using this kvm driver doesn't work
**Special notes for your reviewer**:
Does this need e2e tests? I couldn't find anywhere to add another openstack configuration used in the e2e tests.
Wiki page about this: https://wiki.openstack.org/wiki/Virtio-scsi-for-bdm
**Release note**:
```release-note
cinder: Add support for the KVM virtio-scsi driver
```
The servicecontroller documents that the master is excluded from the
LoadBalancer / NodePort, but this is broken for clusters where we are
using taints for the master (as introduced in 1.6), instead of marking
the master as unschedulable.
This restores the desired documented behaviour, by excluding nodes that
are labeled as masters with the new 1.6 labels, even if they use the new
1.6 taints.
Fix#33884
Automatic merge from submit-queue (batch tested with PRs 44722, 44704, 44681, 44494, 39732)
Fix issue #34242: Attach/detach should recover from a crash
When the attach/detach controller crashes and a pod with attached PV is deleted afterwards the controller will never detach the pod's attached volumes. To prevent this the controller should try to recover the state from the nodes status and figure out which volumes to detach. This requires some changes in the volume providers too: the only information available from the nodes is the volume name and the device path. The controller needs to find the correct volume plugin and reconstruct the volume spec just from the name. This required a small change also in the volume plugin interface.
Fixes Issue #34242.
cc: @jsafrane @jingxu97
Automatic merge from submit-queue (batch tested with PRs 44722, 44704, 44681, 44494, 39732)
Don't rebuild endpoints map in iptables kube-proxy all the time.
@thockin - i think that this PR should help with yours https://github.com/kubernetes/kubernetes/pull/41030 - it (besides performance improvements) clearly defines when update because of endpoints is needed. If we do the same for services (I'm happy to help with it), i think it should be much simpler.
But please take a look if it makes sense from your perspective too.
Automatic merge from submit-queue (batch tested with PRs 44594, 44651)
remove strings.compare(), use string native operation
I notice we use strings.Compare() in some code, we can remove it and use native operation.
Automatic merge from submit-queue
Delete deprecated node phase in kubect describe node.
**What this PR does / why we need it**:
Since NodePhase is no longer used, delete it in `kubect describe node` result.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
ref: https://github.com/kubernetes/kubernetes/pull/44388
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 42177, 42176, 44721)
Job: Respect ControllerRef
**What this PR does / why we need it**:
This is part of the completion of the [ControllerRef](https://github.com/kubernetes/community/blob/master/contributors/design-proposals/controller-ref.md) proposal. It brings Job into full compliance with ControllerRef. See the individual commit messages for details.
**Which issue this PR fixes**:
This ensures that Job does not fight with other controllers over control of Pods.
Ref: #24433
**Special notes for your reviewer**:
**Release note**:
```release-note
Job controller now respects ControllerRef to avoid fighting over Pods.
```
cc @erictune @kubernetes/sig-apps-pr-reviews
Automatic merge from submit-queue (batch tested with PRs 42177, 42176, 44721)
CronJob: Respect ControllerRef
**What this PR does / why we need it**:
This is part of the completion of the [ControllerRef](https://github.com/kubernetes/community/blob/master/contributors/design-proposals/controller-ref.md) proposal. It brings CronJob into compliance with ControllerRef. See the individual commit messages for details.
**Which issue this PR fixes**:
This ensures that other controllers do not fight over control of objects that a CronJob owns.
**Special notes for your reviewer**:
**Release note**:
```release-note
CronJob controller now respects ControllerRef to avoid fighting with other controllers.
```
cc @erictune @kubernetes/sig-apps-pr-reviews
iptables-restore did not previously perform any locking, meaning that
when callers (like kube-proxy) asked iptables-restore to write large
numbers of rules, the iptables-restore process might run in parallel
with other 'iptables' invocations in kubelet (hostports), docker,
and other software. This causes errors like:
"CNI request failed with status 400: 'Failed to ensure that nat chain
POSTROUTING jumps to MASQUERADE: error checking rule: exit status 4:
iptables: Resource temporarily unavailable."
or from Docker
"Failed to allocate and map port 1095-1095: iptables failed:
iptables --wait -t nat -A DOCKER -p tcp -d 0/0 --dport 1095
-j DNAT --to-destination 10.1.0.2:1095 ! -i lbr0: iptables:
Resource temporarily unavailable.\n (exit status 4)"
iptables-restore "wait" functionality was added in iptables git
commit 999eaa241212d3952ddff39a99d0d55a74e3639e but is NOT YET
in a released version of iptables.
See also https://bugzilla.redhat.com/show_bug.cgi?id=1417234
Automatic merge from submit-queue (batch tested with PRs 44555, 44238)
openstack: remove field flavor_to_resource
I believe there is no usage about `flavor_to_resource`, and I think there is no need to build that information, too.
cc @anguslees
**Release note:**
```
NONE
```
Automatic merge from submit-queue
Refactoring reorganize taints function in kubectl to expose operations
**What this PR does / why we need it**:
This adds some UX functionality when specifying taints using kubectl.
For example:
```
./kubectl.sh taint nodes XYZ dedicated1=abca2:NoSchedule
node "XYZ" tainted
./kubectl.sh taint nodes XYZ dedicated1=abca1:NoSchedule --overwrite=True
node "XYZ overwritten
./kubectl.sh taint nodes XYZ dedicated1-
node "XYZ" untainted
./kubectl.sh taint nodes XYZ dedicated=abca1:NoSchedule dedicated1-
node "XYZ" modified
```
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#43167
**Release note**:
```
Fixed the output of kubectl taint node command with minor improvements.
```
When the attach/detach controller crashes and a pod with attached PV is deleted
afterwards the controller will never detach the pod's attached volumes. To
prevent this the controller should try to recover the state from the nodes
status.
Automatic merge from submit-queue (batch tested with PRs 44687, 44689, 44661)
Fix panic when using `kubeadm init` with vsphere cloud-provider
**What this PR does / why we need it**:
Check if the reference is nil when finding machine reference by UUID.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#44603
**Special notes for your reviewer**:
This is just a quick fix for the panic.
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
Implement LRU for AWS device allocator
On failure to attach do not use device from pool
In AWS environment when attach fails on the node
lets not use device from the pool. This makes sure
that a bigger pool of devices is available.
I changed the function signature to contain protocol, port, and path.
When the service has a health check path and port set it will create an
HTTP health check that corresponds to the port and path. If those are
not set it will create a standard TCP health check on the first port
from the listeners that is not nil. As far as I know, there is no way to
tell if a Health Check should be HTTP vs HTTPS.
The Job Listers still use selectors, because this is the
behavior expected by callers. This clarifies the meaning of the
returned list. Some callers may need to switch to using
GetControllerOf() instead, but that is a separate, case-by-case issue.
Automatic merge from submit-queue
Edge based services in proxy
This is sibling effort to what I did for endpoints in KubeProxy.
This PR is first one (changing config & iptables) - userspace will follow.
