Automatic merge from submit-queue
Append newline to the "deleted context ... " and "deleted cluster" message
**What this PR does / why we need it**: Append newline to the "deleted context ... " message.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#35966
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
remove TPR registration, ease validation requirements
Fixes https://github.com/kubernetes/kubernetes/issues/36007 .
This removes the special casing for TPRs inside of the `UnstructuredObject`, which should allow CRUD against skewed kube api server levels.
@kubernetes/kubectl @kubernetes/sig-cli
@janetkuo
Automatic merge from submit-queue
Adding statefulset to the list of things kubectl says it knows about
**What this PR does / why we need it**: Adding statefulset to the list of things kubectl says it knows about.
**Special notes for your reviewer**:
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
NONE
```
cc @kubernetes/sig-apps @erictune
Automatic merge from submit-queue
make kubectl create --edit iterate
`kubectl create --edit` is broken after #36148 merged.
`kubectl create --edit` will fail when a manifest that contains multiple resources.
I guess the root cause is that dynamic typer doesn't support a list of resources currently.
This PR makes `kubectl create --edit` iterate again as `kubectl create`.
Automatic merge from submit-queue
V2resource fixes
when using kubectl set resources it resets all resource fields that are not being set.
for example
$ kubectl set resources deployments nginx --limits=cpu=100m
followed by
$ kubectl set resources deployments nginx --limits=memory=256Mi
would result in the nginx deployment only limiting memory at 256Mi with the previous
limit placed on the cpu being wiped out. This behavior is corrected so that each invocation
only modifies fields set in that command and changed the testing so that the desired behavior
is checked.
Also a typo:
you must specify an update to requests or limits or (in the form of --requests/--limits)
corrected to
you must specify an update to requests or limits (in the form of --requests/--limits)
Implemented both the dry run and local flags.
Added test cases to show that both flags are operating as intended.
Removed the print statement "running in local mode" as in PR#35112
The original PR associated with these fixes where reverted due to causing a flake in hack/make-rules/test-cmd.sh, I gave the 'kubectl set resources' tests there own deployment and set the terminationGracePeriodSeconds to 0 and have run test-cmd.sh for hours without hitting the flake
Automatic merge from submit-queue
kubectl: add less verbose version
The kubectl version output is very complex and makes it hard for users
and vendors to give actionable information. For example during the
recent Kubernetes 1.4.3 TLS security scramble I had to write a one-liner
for users to get out the version number to give to figure out if they
are vulnerable:
```
$ kubectl version | grep -i Server | sed -n 's%.*GitVersion:"\([^"]*\).*%\1%p'
```
Instead this patch outputs simply output by default
```
./kubectl version
Client Version: v1.4.3
Server Version: v1.4.3
```
Adding the `--verbose` flag will output the old format.
Automatic merge from submit-queue
Fix handling lists in kubectl convert
Fixes https://github.com/kubernetes/kubernetes/issues/36722
When handling multiple objects in `kubectl convert` (for example in `kubectl convert -f .` with multiple files in current directory) the objects must be managed as a list instead of individually, otherwise `-o yaml|json` will generate invalid format (just multiple json/yaml objects concatenated) which can't be fed to `kubectl create` like in `kubectl convert -f . | kubectl create -f -`.
```release-note
NONE
```
Automatic merge from submit-queue
Fix strategic patch for list of primitive type with merge sementic
Fix strategic patch for list of primitive type when the patch strategy is `merge`.
Before: we cannot replace or delete an item in a list of primitive, e.g. string, when the patch strategy is `merge`. It will always append new items to the list.
This patch will generate a map to update the list of primitive type.
The server with this patch will accept either a new patch or an old patch.
The client will found out the APIserver version before generate the patch.
Fixes#35163, #32398
cc: @pwittrock @fabianofranz
``` release-note
Fix strategic patch for list of primitive type when patch strategy is `merge` to remove deleted objects.
```
The kubectl version output is very complex and makes it hard for users
and vendors to give actionable information. For example during the
recent Kubernetes 1.4.3 TLS security scramble I had to write a one-liner
for users to get out the version number to give to figure out if they
are vulnerable:
$ kubectl version | grep -i Server | sed -n 's%.*GitVersion:"\([^"]*\).*%\1%p'
Instead this patch outputs simply output with `--short`
./kubectl version --short
Client Version: v1.4.3
Server Version: v1.4.3
Automatic merge from submit-queue
support kubectl apply --force
Support `kubectl apply --force` which is first delete the resource and then re-apply the resource, when the patch fails.
Fixes: #16569
The `describe` command iterates through a list of infos received from
the server and aggregates a list of errors while attempting to call each
resource's respective describer. When a resource exists, but does not
have a describer set, such as `Event`, the `describe` command outputs
the same error `error: no description has been implemented for "Event"`
for each info.
```
$ kubectl describe events
no description has been implemented for "Event"
no description has been implemented for "Event"
no description has been implemented for "Event"
no description has been implemented for "Event"
no description has been implemented for "Event"
no description has been implemented for "Event"
no description has been implemented for "Event"
no description has been implemented for "Event"
no description has been implemented for "Event"
no description has been implemented for "Event"
no description has been implemented for "Event"
no description has been implemented for "Event"
no description has been implemented for "Event"
no description has been implemented for "Event"
```
Automatic merge from submit-queue
Deprecate extensions/v1beta1.Jobs related stuff
This PR supersedes https://github.com/kubernetes/kubernetes/pull/33861, it's a pre-req for removing `extensions/v1beta1.Jobs` (#32763) in the next release.
@kubernetes/kubectl @kubernetes/api-review-team ptal
@bgrant0607 @erictune @janetkuo fyi
```release-note
Deprecate extensions/v1beta1.Jobs
```
Automatic merge from submit-queue
Fix kubectl drain for statefulset
Support deleting pets for `kubectl drain`.
Use evict to delete pods.
Fixes: #33727
```release-note
Adds support for StatefulSets in kubectl drain.
Switches to use the eviction sub-resource instead of deletion in kubectl drain, if server supports.
```
@foxish @caesarxuchao
Automatic merge from submit-queue
Add caching for discovery info with invalidation on cache-miss
TODO:
- [x] write tests for `CachedDiscoveryClient`
- [x] write tests for `DeferredDiscoveryRESTMapper` on cache-miss
- [x] find better way/structure to get rid of `invalidateCh` in c06ba3175b
Automatic merge from submit-queue
Add --force to kubectl delete and explain force deletion
--force is required for --grace-period=0. --now is == --grace-period=1.
Improve command help to explain what graceful deletion is and warn about
force deletion.
Part of #34160 & #29033
```release-note
In order to bypass graceful deletion of pods (to immediately remove the pod from the API) the user must now provide the `--force` flag in addition to `--grace-period=0`. This prevents users from accidentally force deleting pods without being aware of the consequences of force deletion. Force deleting pods for resources like StatefulSets can result in multiple pods with the same name having running processes in the cluster, which may lead to data corruption or data inconsistency when using shared storage or common API endpoints.
```
Automatic merge from submit-queue
update default run function for sub-commands
**Release note**:
``` release-note
release-note-none
```
This patch updates parent commands of sub-commands to exit with a usage
error and exit code 1 on an invalid (non-sub-command) argument.
cc @kargakis
Automatic merge from submit-queue
have basic kubectl crud agnostic of registered types
Makes `kubectl get` agnostic to scheme (baked in API types). This means that it will now work against generic API servers that are "kube shaped".
This is similar to the work done for `kubectl create` last release. I'll split out the smaller command. `kubectl get` looks a lot different, but this eliminates all special casing for TPR in those cases.
@fabianofranz
Automatic merge from submit-queue
Make the fake command factory return the clientset with appropriate rest clients for all the API groups.
Please review only the last commit here. This is based on PR #35865 which will be reviewed independently.
Design Doc: PR #34484
cc @kubernetes/sig-cluster-federation @nikhiljindal
Automatic merge from submit-queue
kubectl: make edit work with lists again
@kubernetes/kubectl this is fixing https://github.com/kubernetes/kubernetes/issues/20519 and slightly changes the behavior of --recursive when the directory that is being edited has files with errors. Previously since `edit` was working on an object basis, bad objects would be skipped and the editor would load the next object. We want to load multiple objects in the same list and it's impossible to load invalid objects in a list so --recursive will not work if there is any error in the directory. I think this is an acceptable trade-off.
Review here: https://github.com/kubernetes/kubernetes/pull/36148/files?w=1
Added test cases to show that both flags are operating as intended.
Removed the print statement "running in local mode" as in PR#35112
The previous attempt at the PR (PR#35050) was reverted for causeing a flake.
I believe that setting the deployments terminationGracePeriodSeconds to 0 should
take care of it. I ran hack/make-rules/test-cmd.sh 50 times in a row without encountering
the flake
when using kubectl set resources it resets all resource fields that are not being set.
for example
# kubectl set resources deployments nginx --limits=cpu=100m
followed by
# kubectl set resources deployments nginx --limits=memory=256Mi
would result in the nginx deployment only limiting memory at 256Mi with the previous
limit placed on the cpu being wiped out. This behavior is corrected so that each invocation
only modifies fields set in that command and changed the testing so that the desired behavior
is checked.
Also a typo:
you must specify an update to requests or limits or (in the form of --requests/--limits)
corrected to
you must specify an update to requests or limits (in the form of --requests/--limits)
changelog:
- fixed a typo in hack/make-rules/test-cmd.sh "effecting" to "affecting"
Automatic merge from submit-queue
clean up client version negotiation to handle no legacy API
Version negotiation fails if the legacy API endpoint isn't available.
This tightens up the negotiation interface based to more clearly express what each stage is doing and what the constraints on negotiation are. This is needed to speak to generic API servers.
@kubernetes/kubectl
--force is required for --grace-period=0. --now is == --grace-period=1.
Improve command help to explain what graceful deletion is and warn about
force deletion.
Calling `internalclientset.New()` with a rest client as an argument simply
copies that rest client to all the API group clients irrespective of the
configured GroupVersion or versionedAPIPath in the client. So only one
API group client gets the client configured correctly for that API
group. All the other API group clients get misconfigured rest clients.
On the other hand, `internalclientset.NewForConfigOrDie()` does the right
thing by reconfiguring the passed configs for each API group and
initializes an appropriate rest client for that group.
Now that we are relying on the `NewForConfigOrDie()` method to
initialize the rest clients, we need to swap the underlying http clients
in each of these rest clients with a fake one for testing.
Automatic merge from submit-queue
update list of vailable resources
Hi,
kubectl get --help produce a list of resource types and aliases :
```
Valid resource types include:
* clusters (valid only for federation apiservers)
* componentstatuses (aka 'cs')
...
```
``` release-note
Update the list of resources in kubectl get --help
```
The list is currently outdated (for exemple missing networkpolicy).
http://kubernetes.io/docs/user-guide/kubectl-overview/#resource-types has the same data and is also outdated.
The patch updates these 2 lists.
Automatic merge from submit-queue
add kubectl cp
Implements `kubectl cp` (https://github.com/kubernetes/kubernetes/issues/13776)
Syntax examples:
```sh
# Copy from pod to local machine
$ kubectl cp [namespace/]pod:/some/file/or/dir ./some/local/file/or/dir
# Copy from local machine to pod
$ kubectl cp /some/local/file/or/dir [namespace/]pod:/some/remote/file/or/dir
```
@deads2k @smarterclayton @kubernetes/sig-cli
Automatic merge from submit-queue
Better kubectl run validations
Adds more validations to flags that must be mutually exclusive in `kubectl run`. For example, `--dry-run` must not be used with `--attach`, `--stdin` or `--tty`. Adds unit tests for these new validations and some previously existing ones.
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
NONE
```
Automatic merge from submit-queue
fixed some issues with kubectl set resources
when using kubectl set resources it resets all resource fields that are not being set.
for example
# kubectl set resources deployments nginx --limits=cpu=100m
followed by
# kubectl set resources deployments nginx --limits=memory=256Mi
would result in the nginx deployment only limiting memory at 256Mi with the previous
limit placed on the cpu being wiped out. This behavior is corrected so that each invocation
only modifies fields set in that command and changed the testing so that the desired behavior
is checked.
Also a typo:
you must specify an update to requests or limits or (in the form of --requests/--limits)
corrected to
you must specify an update to requests or limits (in the form of --requests/--limits)
Implemented both the dry run and local flags.
Added test cases to show that both flags are operating as intended.
Removed the print statement "running in local mode" as in PR#35112
Automatic merge from submit-queue
Update drain test
Update how int convert to string in the kubectl drain test.
It is safer to use `strconv.Itoa()` than `string()`.
Automatic merge from submit-queue
Add "PrintErrorWithCauses" cmdutil helper
**Release note**:
```release-note
NONE
```
This patch adds a new helper function to `cmd/util/helpers.go` that
handles errors containing collections of causes and prints each cause in
a separate newline.
Automatic merge from submit-queue
Verify and update client-go staging area for every PR
We need to keep the staging area up-to-date to prevent PRs from breaking client-go.
It's marked as "WIP" because we need to decide the [versioning strategy](https://github.com/kubernetes/client-go/issues/9) for client-go first. This PR contains breaking changes for client-go.
This is blocking #29934 and potentially #34441
cc @kubernetes/sig-api-machinery
Automatic merge from submit-queue
Add boilerplate to `kubectl completion bash`
**What this PR does / why we need it**:
Small refactor to make kubectl bash and zsh completion share
boilerplate. Previously the boilerplate was not included in the bash
script.
Automatic merge from submit-queue
support editing before creating resource
Support `kubectl create -f config.yaml --edit`
Support editing before creating resource from files, urls and stdin.
The behavior is similar to `kubectl edit`
It won't create anything when edit make no change.
partial: #18064
Based on: #33686 and #33973
```release-note
Support editing before creating resource from files, urls and stdin, e.g. `kubectl create -f config.yaml --edit`
It won't create anything when edit make no change.
```
Alter how runtime.SerializeInfo is represented to simplify negotiation
and reduce the need to allocate during negotiation. Simplify the dynamic
client's logic around negotiating type. Add more tests for media type
handling where necessary.
This patch adds a new helper function to cmd/util/helpers.go that
handles errors containing collections of causes and prints each cause in
a separate newline.
when using kubectl set resources it resets all resource fields that are not being set.
for example
# kubectl set resources deployments nginx --limits=cpu=100m
followed by
# kubectl set resources deployments nginx --limits=memory=256Mi
would result in the nginx deployment only limiting memory at 256Mi with the previous
limit placed on the cpu being wiped out. This behavior is corrected so that each invocation
only modifies fields set in that command and changed the testing so that the desired behavior
is checked.
Also a typo:
you must specify an update to requests or limits or (in the form of --requests/--limits)
corrected to
you must specify an update to requests or limits (in the form of --requests/--limits)
changelog:
- fixed a typo in hack/make-rules/test-cmd.sh "effecting" to "affecting"
Automatic merge from submit-queue
Create restclient interface
Refactoring of code to allow replace *restclient.RESTClient with any RESTClient implementation that implements restclient.RESTClientInterface interface.
Automatic merge from submit-queue
wait until the pods are deleted completely
Drain the pods on a node safely by keeping polling until all pods has been deleted.
```release-note
kubectl drain now waits until pods have been delete from the Node before exiting
```
Fixes: #34782
Automatic merge from submit-queue
Add validation that detects repeated keys in the labels and annotations maps
Fixes#2965 (a nearly 2 year old feature request!)
@kubernetes/kubectl
@eparis
Automatic merge from submit-queue
Move the common test functions from cmd_test.go to cmd/testing/fake.go
**What this PR does / why we need it**:
This is so that we can use NewAPIFactory() from cmd/set/*test.go
Up until now we would get a import loop error.
This commit also adds a basic unit test case for cmd/set/set_image.go
**Which issue this PR fixes**
partial #34592
**Special notes for your reviewer**:
None
**Release note**:
```release-note
NONE
```
This is so that we can use NewAPIFactory() from cmd/set/*test.go
Up until now we would get a import loop error.
This commit also adds a basic unit test case for cmd/set/set_image.go
Automatic merge from submit-queue
glog non-fatal, usually unimportant error instead of fmt
Fixes https://github.com/kubernetes/kubernetes/issues/34977
This particular message isn't usually important, so demote it to glog.
Automatic merge from submit-queue
kubectl: apply prune should fallback to basic delete when a resource has no reaper
Fixes#34790
cc @kubernetes/kubectl @MrHohn
Automatic merge from submit-queue
Allow callers to bypass cmdutil.CheckError() logging
**Release note**:
```release-note
release-note-none
```
This patch is originally from:
https://github.com/kubernetes/kubernetes/pull/25451 (eedb67a30d)
Simplifies code where clients are writing their own errors, and want to
terminate with an exit code.
cc @smarterclayton
Automatic merge from submit-queue
attempt to use discovery RESTMapper and fallback if we can't
Updates `kubectl` to always attempt discovery regardless of server version. This is needed to extension servers.
Automatic merge from submit-queue
Update run flags to point to generators docs
@janetkuo you've requested that in https://github.com/kubernetes/kubernetes/pull/32484#issuecomment-246840562 I'm opening this PR but like you I don't like the length of the descriptions already. The other problem with this is that there's not clean docs for a user to figure out what the generators are. I've stumbled upon this several times and I always found myself looking into the code :/ How about adding new flag/subcommand that will give you more information about generators and we'd move all those `--restart` and `--generator` information into specific generator info and present at the top level only general information?
Automatic merge from submit-queue
Add 'kubectl set resources'
Add "kubectl set resources" for easier updating container memory/cpu limits/requests (for pods or resources with pod templates).
**Usage**
`kubectl set resources (-f FILENAME | TYPE NAME) ([--limits=LIMITS & --requests=REQUESTS])`
**Examples**
Set a deployments nginx container cpu limits to "200m and memory to "512Mi"
`kubectl set resources deployment nginx -c=nginx --limits=cpu=200m,memory=512Mi`
Set the limit and requests for all containers in nginx
`kubectl set resources deployment nginx --limits=cpu=200m,memory=512Mi --requests=cpu=100m,memory=256Mi`
Print the result (in yaml format) of updating nginx container limits from a local, without hitting the server
`kubectl set resources -f path/to/file.yaml --limits=cpu=200m,memory=512Mi --local -o yaml`
Remove limits on containers in nginx
`kubectl set resources deployment nginx --limits=cpu=0,memory=0`
Ref: https://github.com/kubernetes/kubernetes/issues/21648
EDIT: removed the '--remove' flag example
Automatic merge from submit-queue
Improve edit experience
Improve edit experience a bit according [#26050(comment)](https://github.com/kubernetes/kubernetes/issues/26050#issuecomment-246089751)
> a) always go back to the editor
b) always retain what I hand-edited, even if that has to be in comments
@janetkuo
Add a way to set resource limits/requests on running pods
Ref: https://github.com/kubernetes/kubernetes/issues/21648
I squashed the commits to make rebasing easier
Change log:
- fixed a typo that caused the command to be run with kubectl set set instead of the correct kubectl set limit
- added a ResourcesWithPodTemplates to pkg/kubectl/cmd/util/factory.go
instead of hardcoding these resources move there description all in one place
- Fixing some of the flow control in kubectl set limit
- update the help info
- changed the name of ResourcesWithPodTemplates to ResourcesWithPodSpecs to more accuratly describe what it is doing
and changed the variable names to lower case to conform to go's variable naming convention
- changing the name of the command from 'set limit' to 'set resources'
- Adding the new file pkg/kubectl/cmd/set/set_resources.go
- changes to the test cases to reflect the change from 'kubectl set limit' to 'kubectl set resources'
- comment removed
- adding the man page to the git repository attempting to fix Jenkins tests
- adding the user guide
- fixed a few typos
- typo in hack/cmd-test.sh
- implamenting suggestions for command help text
- adding the dry-run flag
- removing the "remove" option in favor of zeroing out request/limits in order to remove them
- changed limits/requests to requests/limit
- changing ResourcesWithPodSpec
- updated generated docs and removed whitespace
- change priint on success message from "resource limits/requests updated" to "resource requirements updated"
- minor rebasing issues - 'hack/test-cmd.sh' now passes
- cmdutil.PrintSuccess added another argument
- fixing mungedocs failure
- removed whitespace from hack/make-rules/test-cmd.sh and an erroneous entry from pkg/cloudprovider/providers/openstack/MAINTAINERS.md
- fixed typo in Short: field of the cobra command
- rebased
- Creating a new factory in the ResourcesWithPodSpecs() so that the testing will pass
- changing ResourcesWithPodSpecs, it doesn't need to be a method of factory
Automatic merge from submit-queue
Merge string flag into util flag
Continuing my work on https://github.com/kubernetes/kubernetes/issues/15634
This refactoring is expected to be completely finished and then I will add a verify scripts in `hack`
There is a usage of options.Err in a Printf, but this option is never set.
This patch passes the stderr into the command and assigns the option correctly.
Automatic merge from submit-queue
remove call to compinit in zsh completion output
**Release note**:
```release-note
release-note-none
```
Fixes: https://github.com/kubernetes/kubernetes/issues/32029
Fixes:
https://github.com/kubernetes/kubernetes/issues/27538#issuecomment-238574035
The zsh completion output makes a call to "compinit" which causes the
zsh completion system to re-initialize every time `<root_cmd> completion zsh`
is sourced, overwriting any settings already applied to other commands.
This in-turn caused other commands' completions to break (such as git,
gcloud, vim) causing an error "function definition file not found" to
be returned any time a tab-completion was attempted.
This patch removes the call to `compinit` in the zsh completion output,
causing no behavioral changes to the existing `completion` command, but
fixing any issues that were caused after sourcing its output.
Fixes: https://github.com/kubernetes/kubernetes/issues/32029
Fixes:
https://github.com/kubernetes/kubernetes/issues/27538#issuecomment-238574035
The zsh completion output makes a call to "compinit" which causes the
zsh completion system to re-initialize every time `<root_cmd> completion zsh`
is sourced, overwriting any settings already applied to other commands.
This in-turn caused other commands' completions to break (such as git,
gcloud, vim) causing an error "function definition file not found" to
be returned any time a tab-completion was attempted.
This patch removes the call to `compinit` in the zsh completion output,
causing no behavioral changes to the existing `completion` command, but
fixing any issues that were caused after sourcing its output.
Automatic merge from submit-queue
return warning on empty list result in kubectl get
**Release note**:
```release-note
NONE
```
The current default behavior of `kubectl get` is to return an empty
output when there are no resources to display. This patch improves
usability by returning a warning through stderr in the case of an empty
list.
##### Before
`$ kubectl get pods`
- *empty output*
##### After
`$ kubectl get pods`
```
There are no resources to display.
```
Automatic merge from submit-queue
Allow 'pod/' prefix in pod name for 'kubectl exec'
This PR adds ability to provide pod name with 'pod/' prefix for 'kubectl exec' command. Pod names without 'pod/' prefix are still allowed.
Fixes#24225
Automatic merge from submit-queue
Refactor kubectl edit cmd
Refactor `kubectl edit` command.
#33250 will be based on this PR for easier review.
Will need to rebase after #33973 merges.
Automatic merge from submit-queue
Make kubectl label and annotate more consistent
**What this PR does / why we need it**:
This makes the label and annotate cmd files more consistent which should help with code maintenance.
Some of the main changes:
- add dryrun to annotate (can push this in a different PR if requested)
- use Complete(), Validate() and RunX()
- don't place dynamic variables in the options (only user options and args)
- call the NewBuilder() in the Run function.
**Which issue this PR fixes**
fixes#34151
**Special notes for your reviewer**:
Note: you *can* now diff the two files and the changes make sense.
**Release note**:
```release-note
kubectl annotate now supports --dry-run
```
Automatic merge from submit-queue
remove testapi.Default.GroupVersion
I'm going to try to take this as a series of mechanicals. This removes `testapi.Default.GroupVersion()` and replaces it with `registered.GroupOrDie(api.GroupName).GroupVersion`.
@caesarxuchao I'm trying to see how much of `pkg/api/testapi` I can remove.
Automatic merge from submit-queue
Add kubelet awareness to taint tolerant match caculator.
Add kubelet awareness to taint tolerant match caculator.
Ref: #25320
This is required by `TaintEffectNoScheduleNoAdmit` & `TaintEffectNoScheduleNoAdmitNoExecute `, so that node will know if it should expect the taint&tolerant
Some of the main changes:
- add dryrun to annotate (can push this in a different PR if requested)
- use Complete(), Validate() and RunX()
- don't place dynamic variables in the options (only user options and args)
- call the NewBuilder() in the Run function.
You can now do diff between these files and they are as identical as possible.
Automatic merge from submit-queue
Add option to set a service nodeport
**Release note**:
```release-note
Add kubectl --node-port option for specifying the service nodeport
```
This patch adds the option to set a nodeport when creating a NodePort
service. In case of a port allocation error due to a specified port
being out of the valid range, the error now includes the valid
range. If a `--node-port` value is not specified, it defaults to zero, in
which case the allocator will default to its current behavior of
assigning an available port.
This patch also adds a new helper function in `cmd/util/helpers.go` to
retrieve `Int32` cobra flags.
**Example**
```
# create a nodeport service with an invalid port
$ kubectl create service nodeport mynodeport --tcp=8080:7777 --node-port=1
The Service "mynodeport" is invalid: spec.ports[0].nodePort: Invalid
value: 1: provided port is not in the valid range. Valid ports range
from 30000-32767
# create a nodeport service with a valid port
$ kubectl create service nodeport mynodeport --tcp=8080:7777 --node-port=30000
service "mynodeport" created
# create a nodeport service with a port already in use
$ kubectl create service nodeport mynodeport --tcp=8080:7777 --node-port=30000
The Service "mynodeport" is invalid: spec.ports[0].nodePort: Invalid value: 3000: provided port is already allocated
$ kubectl describe service mynodeport
Name: mynodeport
Namespace: default
Labels: app=mynodeport
Selector: app=mynodeport
Type: NodePort
IP: 172.30.81.254
Port: 8080-7777 8080/TCP
NodePort: 8080-7777 30000/TCP
Endpoints: <none>
Session Affinity: None
No events.
```
@fabianofranz
Automatic merge from submit-queue
Allow empty annotation values
Related downstream issue: https://github.com/openshift/origin/issues/11175
**Release note**:
```release-note
release-note-none
```
Annotations with empty values can be used, for example, in diagnostics
logging. This patch removes the client-side check for empty values in
an annotation key-value pair.
**Before**
```
$ kubectl annotate pod zookeeper-1 node-selector="" --overwrite
error: invalid annotation format: node-selector=
```
**After**
```
$ kubectl annotate pod zookeeper-1 node-selector="" --overwrite
pod "zookeper-1" annotated
```
```
$ kubectl get po/zookeeper-1 --template='{{.metadata.annotations}}'
map[... node-selector: test-label:test]
```
@fabianofranz @liggitt
Annotations with empty values can be used, for example, in diagnostics
logging. This patch removes the client-side check for empty values in
an annotation key-value pair.
**Before**
```
$ kubectl annotate pod zookeeper-1 node-selector="" --overwrite
error: invalid annotation format: node-selector=
```
**After**
```
$ kubectl annotate pod zookeeper-1 node-selector="" --overwrite
pod "zookeper-1" annotated
```
```
$ kubectl get po/zookeeper-1 --template='{{.metadata.annotations}}'
map[... node-selector: test-label:test]
```
Automatic merge from submit-queue
Add local option to annotate
**What this PR does / why we need it**:
Add the --local option to be both consistent with other commands and so it can be used with "set selector" and "create service".
**Which issue this PR fixes**
Related: #7296
**Special notes for your reviewer**:
None
**Release note**:
```release-note
Add a new option "--local" to the `kubectl annotate`
```
Automatic merge from submit-queue
Add local option to the label command
**What this PR does / why we need it**:
Add the --local option to be both consistent with other commands and so it can be used with "set selector" and "create service".
**Which issue this PR fixes**
Related: #7296
**Special notes for your reviewer**:
None
**Release note**:
```release-note
Add a new option "--local" to the `kubectl label`
```
This patch adds the option to set a nodeport when creating a NodePort
service. In case of a port allocation error due to a specified port
being out of the valid range, the error now includes the valid
range. If a `--node-port` value is not specified, it defaults to zero, in
which case the allocator will default to its current behavior of
assigning an available port.
This patch also adds a new helper function in `cmd/util/helpers.go` to
retrieve `Int32` cobra flags.
**Example**
```
$ kubectl create service nodeport mynodeport --tcp=8080:7777 --node-port=1
The Service "mynodeport" is invalid: spec.ports[0].nodePort: Invalid
value: 1: provided port is not in the valid range. Valid ports range
from 30000-32767
$ kubectl create service nodeport mynodeport --tcp=8080:7777 --node-port=30000
service "mynodeport" created
$ oc describe service mynodeport
Name: mynodeport
Namespace: default
Labels: app=mynodeport
Selector: app=mynodeport
Type: NodePort
IP: 172.30.81.254
Port: 8080-7777 8080/TCP
NodePort: 8080-7777 30000/TCP
Endpoints: <none>
Session Affinity: None
No events.
```
Automatic merge from submit-queue
add linebreak between resource groups
**Release note**:
```release-note
release-note-none
```
Printing multiple groups via `kubectl get all` can produce output that is
hard to read in cases where there are a lot of resource types to display
/ some resource types contain varying column amounts.
This patch adds a linebreak above each group of resources only when
there is more than one group to display, and always omitting the
linebreak above the first group. This makes for slightly improved
output.
Linebreaks are printed to stderr, and honor the `--no-headers` option.
**Before**
```
$ kubectl get all
NAME READY STATUS RESTARTS AGE
po/database-1-u9m9l 1/1 Running 3 5d
po/idling-echo-1-9fmz6 2/2 Running 8 5d
po/idling-echo-1-gzb0v 2/2 Running 4 5d
NAME DESIRED CURRENT READY AGE
rc/database-1 1 1 1 6d
rc/idling-echo-1 2 2 2 6d
NAME CLUSTER-IP EXTERNAL-IP PORT(S)
AGE
svc/database 172.30.11.104 <none> 5434/TCP
6d
svc/frontend 172.30.196.217 <none> 5432/TCP
6d
svc/idling-echo 172.30.115.67 <none> 8675/TCP,3090/UDP
6d
svc/kubernetes 172.30.0.1 <none> 443/TCP,53/UDP,53/TCP
6d
svc/mynodeport 172.30.81.254 <nodes> 8080/TCP
5d
svc/mynodeport1 172.30.198.193 <nodes> 8080/TCP
5d
svc/mynodeport2 172.30.149.48 <nodes> 8080/TCP
5d
svc/mynodeport3 172.30.195.235 <nodes> 8080/TCP
5d
```
**After**
```
$ kubectl get all
NAME READY STATUS RESTARTS AGE
po/database-1-u9m9l 1/1 Running 3 5d
po/idling-echo-1-9fmz6 2/2 Running 8 5d
po/idling-echo-1-gzb0v 2/2 Running 4 5d
NAME DESIRED CURRENT READY AGE
rc/database-1 1 1 1 6d
rc/idling-echo-1 2 2 2 6d
NAME CLUSTER-IP EXTERNAL-IP PORT(S)
AGE
svc/database 172.30.11.104 <none> 5434/TCP
6d
svc/frontend 172.30.196.217 <none> 5432/TCP
6d
svc/idling-echo 172.30.115.67 <none> 8675/TCP,3090/UDP
6d
svc/kubernetes 172.30.0.1 <none> 443/TCP,53/UDP,53/TCP
6d
svc/mynodeport 172.30.81.254 <nodes> 8080/TCP
5d
svc/mynodeport1 172.30.198.193 <nodes> 8080/TCP
5d
svc/mynodeport2 172.30.149.48 <nodes> 8080/TCP
5d
svc/mynodeport3 172.30.195.235 <nodes> 8080/TCP
5d
```
cc @fabianofranz @liggitt
Automatic merge from submit-queue
suggest use of `kube explain <resource>` in kube get output
**Release note**:
```release-note
release-note-none
```
This patch improves usability flow, making it easier for a user to
discover the command `kube explain <resource>` through `kube get` output.
##### After
```
$ kube get
You must specify the type of resource to get. Valid resource types include:
* componentstatuses (aka 'cs')
* configmaps (aka 'cm')
* daemonsets (aka 'ds')
* deployments (aka 'deploy')
* events (aka 'ev')
* endpoints (aka 'ep')
* horizontalpodautoscalers (aka 'hpa')
* ingress (aka 'ing')
* jobs
* limitranges (aka 'limits')
* nodes (aka 'no')
* namespaces (aka 'ns')
* petsets (alpha feature, may be unstable)
* pods (aka 'po')
* persistentvolumes (aka 'pv')
* persistentvolumeclaims (aka 'pvc')
* quota
* resourcequotas (aka 'quota')
* replicasets (aka 'rs')
* replicationcontrollers (aka 'rc')
* secrets
* serviceaccounts (aka 'sa')
* services (aka 'svc')
error: Required resource not specified.
Use "kubectl explain <resource>" for a detailed description of that resource (e.g. kubectl explain pods).
See 'kubectl get -h' for help and examples.
```
Printing multiple groups via `kubectl get all` can produce output that is
hard to read in cases where there are a lot of resource types to display
/ some resource types contain varying column amounts.
This patch adds a linebreak above each group of resources only when
there is more than one group to display, and always omitting the
linebreak above the first group. This makes for slightly improved
output.
Linebreaks are printed to stderr, and honor the `--no-headers` option.
**Before**
```
$ kubectl get all
NAME READY STATUS RESTARTS AGE
po/database-1-u9m9l 1/1 Running 3 5d
po/idling-echo-1-9fmz6 2/2 Running 8 5d
po/idling-echo-1-gzb0v 2/2 Running 4 5d
NAME DESIRED CURRENT READY AGE
rc/database-1 1 1 1 6d
rc/idling-echo-1 2 2 2 6d
NAME CLUSTER-IP EXTERNAL-IP PORT(S)
AGE
svc/database 172.30.11.104 <none> 5434/TCP
6d
svc/frontend 172.30.196.217 <none> 5432/TCP
6d
svc/idling-echo 172.30.115.67 <none> 8675/TCP,3090/UDP
6d
svc/kubernetes 172.30.0.1 <none> 443/TCP,53/UDP,53/TCP
6d
svc/mynodeport 172.30.81.254 <nodes> 8080/TCP
5d
svc/mynodeport1 172.30.198.193 <nodes> 8080/TCP
5d
svc/mynodeport2 172.30.149.48 <nodes> 8080/TCP
5d
svc/mynodeport3 172.30.195.235 <nodes> 8080/TCP
5d
```
**After**
```
$ kubectl get all
NAME READY STATUS RESTARTS AGE
po/database-1-u9m9l 1/1 Running 3 5d
po/idling-echo-1-9fmz6 2/2 Running 8 5d
po/idling-echo-1-gzb0v 2/2 Running 4 5d
NAME DESIRED CURRENT READY AGE
rc/database-1 1 1 1 6d
rc/idling-echo-1 2 2 2 6d
NAME CLUSTER-IP EXTERNAL-IP PORT(S)
AGE
svc/database 172.30.11.104 <none> 5434/TCP
6d
svc/frontend 172.30.196.217 <none> 5432/TCP
6d
svc/idling-echo 172.30.115.67 <none> 8675/TCP,3090/UDP
6d
svc/kubernetes 172.30.0.1 <none> 443/TCP,53/UDP,53/TCP
6d
svc/mynodeport 172.30.81.254 <nodes> 8080/TCP
5d
svc/mynodeport1 172.30.198.193 <nodes> 8080/TCP
5d
svc/mynodeport2 172.30.149.48 <nodes> 8080/TCP
5d
svc/mynodeport3 172.30.195.235 <nodes> 8080/TCP
5d
```
Contination of #1111
I tried to keep this PR down to just a simple search-n-replace to keep
things simple. I may have gone too far in some spots but its easy to
roll those back if needed.
I avoided renaming `contrib/mesos/pkg/minion` because there's already
a `contrib/mesos/pkg/node` dir and fixing that will require a bit of work
due to a circular import chain that pops up. So I'm saving that for a
follow-on PR.
I rolled back some of this from a previous commit because it just got
to big/messy. Will follow up with additional PRs
Signed-off-by: Doug Davis <dug@us.ibm.com>
The current default behavior of `kubectl get` is to return an empty
output when there are no resources to display. This patch improves
usability by returning a warning through stderr in the case of an empty
list.
Automatic merge from submit-queue
Update godep for github.com/spf13/pflag and replace StringSlice with String Array in configMap
Update godep for pkg `github.com/spf13/pflag`, because the new flag type `StringArray` within it is needed in issue #27454
Automatic merge from submit-queue
Unwrap aggregates of size 1 when writing errors
Our special error logic was being defeated by aggregates.
Also, only use aggregate in get when we actually are dealing with
multiple errors.
@kubernetes/kubectl
For other kubectl reviewers - no one should use an aggregate unless you are ranging over a list, and even then ask yourself whether you really care about returning all errors.
Automatic merge from submit-queue
add port validate when --port is set or --expose=true
```shell
$ kubectl run nginx --image=nginx --port=88888 --expose=true
The Deployment "nginx" is invalid.
spec.template.spec.containers[0].ports[0].containerPort: Invalid value: 88888: must be between 1 and 65535, inclusive
$ kubectl run nginx --image=nginx --port=0 --expose=true
error: --port must be a positive integer when exposing a service
```
1. when port is greater than 65535, port is required between 1 and 65535 and deployment 'nginx' can not be created.
2. when port is less than 1, port is not validated and deployment 'nginx' can be created. But service will be created failed.
so i add this change:
when --port is set or --expose=true, validate port range so that error reported can be the same when port is greater than 65535 or less than 1.
And this can also find the port range error before creating the deployment other than during creating the deployment.
Automatic merge from submit-queue
Update kubectl create message when using --dry-run
`kubectl create <resource> <name> --dry-run` provides a misleading success
message.
When commands such as `kubectl new-app node` are run with a
`--dry-run` flag, they make this clear by appending a "(DRY RUN)"
string to the final output. `kubectl create <resource> <name> --dry-run`
does not do this, providing a potentially misleading output.
This patch appends a "(DRY RUN)" string to the end of a successful
message of `kubectl create` subcommands that support the `--dry-run` flag.
`kubectl create quota quota --dry-run`
```
resourcequota "quota" created
```
`kubectl create quota quota --dry-run`
```
resourcequota "quota" created (DRY RUN)
```
**Release note**:
```release-note
release-note-none
```
Automatic merge from submit-queue
Remove kubectl namespace command
**What this PR does / why we need it**:
It removes deprecated `kubectl namespace` command, which `has been superseded by the context.namespace field of .kubeconfig files. See 'kubectl config set-context --help' for more details`. It was done nearly two years ago, so like `// TODO remove once people have been given enough time to notice` comment says it may be a good time to get rid of it.
**Special notes for your reviewer**:
None ATM.
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
Remove kubectl namespace command
```
Automatic merge from submit-queue
add resource filter handling before printing
**Release note**:
```release-note
release-note-none
```
Resources are currently filtered (in order to prevent printing) at print
time in their HumanReadablePrinter handlers. This design makes it not
possible to filter objects when they are printed using any other
printer, such as YAML, JSON, or the NamePrinter.
This patch removes any filters previously added at the printer level for
pods and adds a way to define resource-specific filters before they are
sent to a printer handler. A woking filter handler for pods has also been
implemented.
Filters affect resources being printed through the HumanReadablePrinter,
YAML, JSON, and `--template` printers.
cc @smarterclayton
Resources are currently filtered (in order to prevent printing) at print
time in their HumanReadablePrinter handlers. This design makes it not
possible to filter objects when they are printed using any other
printer, such as YAML, JSON, or the NamePrinter.
This patch removes any filters previously added at the printer level for
pods and adds a way to define resource-specific filters before they are
sent to a printer handler. A woking filter handler for pods has also
been
implemented.
Filters affect resources being printed through the HumanReadablePrinter,
YAML, JSON, and `--template` printers.
Automatic merge from submit-queue
Behave gracefully in kubectl if /version returns 404
Fixes https://github.com/kubernetes/kubernetes/issues/32679.
It's only about caching the swagger spec here. So it's safe to fall back to non-caching mode and continue.
This commit moves away from using a global variable for default
configuration checking, and instead exposes a method on LoadingRules to
determine whether a particular restclient.Config should be considered
"default". This allows kubectl to provide its own defaults (the same
as before, KUBERNETES_MASTER and the static localhost:8080 values) while
allowing other clients to avoid defining them.
In-cluster config defaulting is now easier to read.
Automatic merge from submit-queue
Extend all to more resources
Added more things from the list here:
https://github.com/kubernetes/kubernetes/blob/master/pkg/kubectl/cmd/cmd.go#L159
Update the devel/kubectl-conventions.md with the rules mentioned by
a few folks on which resources could be added to the special 'all' alias
Automatic merge from submit-queue
make --include-extended-apis deprecated and remove plumbing
Marks a dead CLI parameter as deprecated and removes the plumbing for it.
Automatic merge from submit-queue
Fixes#30562: Refactor kubectl command options to use common struct for common file params
Fixes#30562 : Refactor common go struct options in pkg/kubectl/cmd/*.go.
@pwittrock
Automatic merge from submit-queue
Handle Stream() errors consistently in restclient
We should be following the same rules for Stream() as the normal body
request flow.
Also add slightly more output on a server error - in the future we may
want to clean this up but it's potentially hiding bad responses.
Related to #32009 but isn't the fix (so far)
Automatic merge from submit-queue
add alias deploy for deployment
deploy is also alias of deployment. add alias deploy for deployment so the help can see deploy in the Aliases like below:
```sh
k8s@k8s-node1:~/go/workspace/src/k8s.io/kubernetes/cmd/kubectl$ ./kubectl create dep -h
Create a deployment with the specified name.
Aliases:
deployment, dep, deploy
```
Automatic merge from submit-queue
Ensure that we are closing files.
**What this PR does / why we need it**: In several places we are leaking file descriptors. This could be problematic on systems with low ulimits for them.
**Release note**:
```release-note
```
Automatic merge from submit-queue
print resource kind prefix when `kubectl get all` has single type to display
**Release note**:
```release-note
NONE
```
This patch forces the HumanReadablePrinter to display resource kind
prefixes when there is only one type of resource to show and a specific
resource type has not been specified as an argument to kubectl get
`$ kubectl get all`
```
NAME CLUSTER-IP EXTERNAL-IP PORT(S) AGE
kubernetes 172.30.0.1 <none> 443/TCP,53/UDP,53/TCP 2m
```
`$ kubectl get all`
```
NAME CLUSTER-IP EXTERNAL-IP PORT(S) AGE
svc/kubernetes 172.30.0.1 <none> 443/TCP,53/UDP,53/TCP 2m
```
Automatic merge from submit-queue
update `kubectl expose` output to UsageError
**Release note**:
```release-note
NONE
```
This patch updates `kubectl expose` output (with no resources provided)
to a UsageError so that the `kubectl expose -h` suggestion is displayed.
##### Before
`$ kubectl expose`
```
error: You must provide one or more resources by argument or filename.
Example resource specifications include:
'-f rsrc.yaml'
'--filename=rsrc.json'
'pods my-pod'
'services'
```
##### After
```
error: You must provide one or more resources by argument or filename.
Example resource specifications include:
'-f rsrc.yaml'
'--filename=rsrc.json'
'pods my-pod'
'services'
See 'kubectl expose -h' for help and examples.
```
Automatic merge from submit-queue
Rollout dry run
**What this PR does / why we need it**: rollout undo add dry-run implementation
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#28219
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```
rollout undo add dry-run option
```
Automatic merge from submit-queue
add alias svc for create_service.go
add alias 'svc' for service in create_service.go so that alias 'svc' can be used and also can be seen in help message's Aliases like below:
```shell
$ kubectl create svc -h
Create a service using specified subcommand.
Aliases:
service, svc
Available Commands:
clusterip Create a clusterIP service.
loadbalancer Create a LoadBalancer service.
nodeport Create a NodePort service.
Usage:
kubectl create service [options]
```
Automatic merge from submit-queue
Improve the get output for completed pods
**What this PR does / why we need it**:
- rename FinishPrint() to AfterPrint()
- add a newline to separate it from the table
- remove the "objects" and ()
- assume plural
**Which issue this PR fixes**
fixes#31160
**Special notes for your reviewer**:
None
**Release note**:
```release-note
Improve the get output for completed pods
```
Automatic merge from submit-queue
update taints e2e, restrict taints operation with key, effect
Since taints are now unique by key, effect on a node, this PR is to restrict existing taints adding/removing/updating operations in taints e2e.
Also fixes https://github.com/kubernetes/kubernetes/issues/31066#issuecomment-242870101
Related prior Issue/PR #29362 and #30590
Automatic merge from submit-queue
add suggestion to use `describe` to obtain container names
**Release note**:
```release-note
release-note-none
```
Commands with the `--container=` option provide no suggestions to a user
on how to obtain a container's name from a pod.
This patch adds a suggestion on the usage output to use the `describe`
command on a pod to obtain the container value that is passed to the
`--container=` flag.
`$ kubectl exec -h`
```
Execute a command in a container.
Examples:
kubectl exec 123456-7890 date
kubectl exec 123456-7890 -c ruby-container date
kubectl exec 123456-7890 -c ruby-container -i -t -- bash -il
Flags:
-c, --container string Container name. If omitted, the first container in the pod will be chosen. Use the 'describe' command to find the list of containers on a pod.
-p, --pod string Pod name
-i, --stdin Pass stdin to the container
-t, --tty Stdin is a TTY
Automatic merge from submit-queue
Return all the invalid flags for rollingupdate
It had better to return all the invalid flags for the "validateArguments" function, so the user can modify them at once.
Automatic merge from submit-queue
Return all the invalid parameters for set_image
Suggest returning all the invalid parameters for "ImageOptions.Validate()" in set_image.go.
Automatic merge from submit-queue
Optimise the DefaultGenerators function
It needn't define all the generators in the "DefaultGenerators" function, it just return the "cmdName" generator, the others is redundant.
Automatic merge from submit-queue
add ClientSet to factory to remove non-generated client
We should move to using generated clients in the `kubectl` client. We should really move to generated external clients, but this at least moves away from using manually created clients.
@fabianofranz @mfojtik When I complete this work (move the other commands and eliminate the old API), this will ripple downstream.
Automatic merge from submit-queue
make swaggerschema agnostic about which version to use
`Factory.SwaggerSchema` was reliant on having a non-generated client bits filled in so that it could get the adapted client it wanted. There's no need since discovery ignores configured GroupVersions. This eliminates the unneeded dependency.
- Change FinishPrint() to AfterPrint()
(As suggested in #31160)
- add a newline to separate it from the table
- remove the "objects" and ()
- assume plural
This patch forces the HumanReadablePrinter to display resource kind
prefixes when there is only one type of resource to show and a specific
resource type has not been specified as an argument to kubectl get
`$ kubectl get all`
```
NAME CLUSTER-IP EXTERNAL-IP PORT(S) AGE
kubernetes 172.30.0.1 <none> 443/TCP,53/UDP,53/TCP 2m
```
`$ kubectl get all`
```
NAME CLUSTER-IP EXTERNAL-IP PORT(S) AGE
svc/kubernetes 172.30.0.1 <none> 443/TCP,53/UDP,53/TCP 2m
```
Automatic merge from submit-queue
add deploy for deployment in kubectl set image help text
add shorthand deploy for deployment in kubectl set image help text
Automatic merge from submit-queue
change annotate_resources to valid_resources
annotate_resources missing some resources such as deployment, namespace.
i think using valid_resources to replace annotate_resources more suitable.
Automatic merge from submit-queue
kubectl edit: Do not add warning header if ftype is json.
This PR blocks adding warning header if `kubectl edit` is used with `-o json` option.
Fixed header contains comment (what is not supported by json standard) what can break utilities which are using libraries that conforms with http://www.ietf.org/rfc/rfc7159.txtfixes#29524
/cc @pwittrock
```release-note
Removed comments in json config when using kubectl edit with -o json
```
Automatic merge from submit-queue
Fix named pipe in kubectl zsh completion
This PR fixes#28049
Though my zsh version > 5.0, I still got the problem. So, I think we need this fix.
---
### Env
```
OS: Ubuntu 14.04
$ zsh --version
zsh 5.0.2 (x86_64-pc-linux-gnu)
```
### A simple DEMO to show the root cause
In zsh and bash, a multi-line named pipe, who is wrapped by parenthesis, is possible to mismatch the "right parenthesis", even that parenthesis is in a here-document.
The following script was going to use `sed` to print the text in the 'BASH_COMPLETION_EOF' here-document.
> * I made the `sed` simpler. As you can see, `sed` actually does nothing here. It just prints what it gets from `<<`). In real [`pkg/kubectl/cmd/completion.go`](https://github.com/kubernetes/kubernetes/blob/v1.3.5/pkg/kubectl/cmd/completion.go#L246-L258), `sed` will do some text replacement, changing bash functions to zsh functions. But that is not the point of the problem.
> * I use `cat <(...)` to replace the `source <(...)`.
> In this way, we can see how named pipe works.
run-bad.zsh:
```bash
#!/usr/bin/zsh
cat <(sed -e 's/foo/bar/g' <<'BASH_COMPLETION_EOF'
aaa='aaa'
case aaa in
'aaa') # <- This ')' is in a here-document, but it is handled by named pipe by mistake.
echo 'yes'
;;
esac
BASH_COMPLETION_EOF
)
```
> Output:
> ```
> ./run-bad.zsh
> aaa='aaa'
> case aaa in
> 'aaa'yes <- You can see the here-document `echo yes` has been executed!!!
> ./run-bad.zsh:8: parse error near `;;'
> ```
The named pipe `<(sed ...` "eats" the `)`, which should belong to `case aaa in 'aaa')`. So that the named pipe ends earlier than expectation. The left zsh code is broken, it fails.
### Here's the fix
Move the code into a function, and use an inline named pipe.
run.zsh:
```bash
#!/usr/bin/zsh
print_sed_result() {
sed -e 's/foo/bar/g' <<'BASH_COMPLETION_EOF'
aaa='aaa'
case aaa in
'aaa')
echo 'yes'
;;
esac
BASH_COMPLETION_EOF
}
cat <(print_sed_result) # <- Use an inline named pipe
```
> Output:
> ```
> ./run.zsh > stack@docker-dev01
> aaa='aaa'
> case aaa in
> 'aaa')
> echo 'yes'
> ;;
> esac
> ```
Now, the here-document and named pipe work correctly.
We should be following the same rules for Stream() as the normal body
request flow.
Also add slightly more output on a server error - in the future we may
want to clean this up but it's potentially hiding bad responses.
Automatic merge from submit-queue
Print a message if metrics are not yet available.
**What this PR does / why we need it**:
It takes about 80s to gather first metrics for the newly created pod. We would like to indicate this to the user, so that they don't mistake it for the command failure.
In case no metrics are found, we check whether there should be any, and if yes, print the appropriate message to the user.
**Which issue this PR fixes**
#30826
```release-note
NONE
```
Automatic merge from submit-queue
Adding clusters to the list of valid resources printed by kubectl help
Ref https://github.com/kubernetes/kubernetes/issues/25592
Adding clusters to the list of valid resources printed by kubectl help with a clear message that it only works when talking to federation apiserver.
In future, we should replace the hard coded list with a dynamic list generated using APIServer's discovery API.
```release-note
Adding clusters to the list of valid resources printed by kubectl help
```
cc @kubernetes/kubectl @kubernetes/sig-cluster-federation
This changes clientcmd to skip the default cluster, but preserves the
behavior in kubectl. This prevents the possibility of an administrator
misconfiguration in kubelet or other server component from allowing a
third party who can bind to 8080 on that host from potentially
impersonating an API server and gaining root access.
Automatic merge from submit-queue
Add get/delete cluster, delete context to kubectl config
Fixes#29794 by adding `get-clusters`, `delete-cluster` and `delete-context` actions to `kubectl config`.
Automatic merge from submit-queue
Fix getting pods from all namespaces
**What this PR does / why we need it**:
Use Heapster handler for pods from all namespaces (added in the new version).
Depends on #30993
Automatic merge from submit-queue
add valid resources when args is nil
add valid resources message is more friendly to user when running `kubectl explain`
and this also can be same with other cmd like get\describe.
Automatic merge from submit-queue
Fixed two issues of kubectl bash completion.
This patch includes the fix of the following issue:
• Correct the method invocation from "__kubectl_namespace_flag"
to "__kubectl_override_flags"
• Support bash completion if "--namespace=xxx" style flags are
specified in the kubectl command
Fixes#31134
Automatic merge from submit-queue
change to stderr
`fmt.Fprint(out, "You must specify the type of resource to describe. ", valid_resources)`
change this to stderr.
Automatic merge from submit-queue
Optimise the ValidateBytes function
The PR optimise the "ValidateBytes" function in factory.go. Too much "if" branches is poor readability, use "switch" to look better.
In zsh and bash, a multi-line named pipe, who is wrapped by
parenthesis, is possible to mismatch the right parenthesis, even that
parenthesis is in a here-document. So, we move the code into a
function, and use an inline named pipe.
Signed-off-by: ohmystack <jiangjun1990@gmail.com>
This patch includes the fix of the following issue:
• Correct the method invocation from "__kubectl_namespace_flag"
to "__kubectl_override_flags"
• Support bash completion if "--namespace=xxx" style flags are
specified in the kubectl command
Fixes#31134
Automatic merge from submit-queue
kubectl run add pull-policy flag to control image pull policy
```release-note
Add support for --image-pull-policy to 'kubectl run'
```
Fix#30493
@pwittrock @thockin ptal
Automatic merge from submit-queue
remove duplicate errors from aggregate error outputs
release-label-none
Duplicate error messages are sometimes shown when displaying aggregate errors:
`$ kubectl label pod/database-1-fn0r7 qwer1345%$$#=self`
```
* metadata.labels: Invalid value: "qwer1345%5602#": name part must match the regex ([A-Za-z0-9][-A-Za-z0-9_.]*)?[A-Za-z0-9] (e.g. 'MyName' or 'my.name' or '123-abc')
* metadata.labels: Invalid value: "qwer1345%5602#": name part must match the regex ([A-Za-z0-9][-A-Za-z0-9_.]*)?[A-Za-z0-9] (e.g. 'MyName' or 'my.name' or '123-abc')
* metadata.labels: Invalid value: "qwer1345%5602#": name part must match the regex ([A-Za-z0-9][-A-Za-z0-9_.]*)?[A-Za-z0-9] (e.g. 'MyName' or 'my.name' or '123-abc')
```
This patch removes any duplicate messages (adjacent or not) that appear in the final list of errors.
Automatic merge from submit-queue
Bump heapster version
Bump heapster version to v1.2.0-beta.1.
Migrate metrics tests and HPA to use List objects introduced in the new version.
Automatic merge from submit-queue
use valid_resources to replace kubectl.PossibleResourceTypes
```release
Fix resource list printed by kubectl help
```
`kubectl get` return
>
You must specify the type of resource to get. Valid resource types include:
* componentstatuses (aka 'cs')
* configmaps
* daemonsets (aka 'ds')
* deployments
* events (aka 'ev')
* endpoints (aka 'ep')
* horizontalpodautoscalers (aka 'hpa')
* ingress (aka 'ing')
* jobs
* limitranges (aka 'limits')
* nodes (aka 'no')
* namespaces (aka 'ns')
* pods (aka 'po')
* persistentvolumes (aka 'pv')
* persistentvolumeclaims (aka 'pvc')
* quota
* resourcequotas (aka 'quota')
* replicasets (aka 'rs')
* replicationcontrollers (aka 'rc')
* secrets
* serviceaccounts (aka 'sa')
* services (aka 'svc')
error: Required resource not specified.
See 'kubectl get -h' for help and examples.
while `kubectl get --help` return
> root@k8s-node1:~# kubectl get --help
Display one or many resources.
Possible resource types include (case insensitive): pods (po), services (svc), deployments,
replicasets (rs), replicationcontrollers (rc), nodes (no), events (ev), limitranges (limits),
persistentvolumes (pv), persistentvolumeclaims (pvc), resourcequotas (quota), namespaces (ns),
serviceaccounts (sa), ingresses (ing), horizontalpodautoscalers (hpa), daemonsets (ds), configmaps,
componentstatuses (cs), endpoints (ep), and secrets.
By specifying the output as 'template' and providing a Go template as the value
of the --template flag, you can filter the attributes of the fetched resource(s).
......
kubectl.PossibleResourceTypes missing some resouces such as jobs quota.
describe and explain have the same problem.
i think using valid_resources to replace kubectl.PossibleResourceTypes more suitable.
Automatic merge from submit-queue
add --raw for kubectl get
Adds a `--raw` option to `kubectl get` that allow you specify your URI, but use the transport built by `kubectl`. This is especially useful when working with secured environments that require authentication and authorization to hit non-api endpoints. For example, `kubect get --raw /metrics` or if you want to debug a watch with a view at the exact data `kubectl get --raw '/api/v1/namespaces/one/replicationcontrollers?watch=true'`.
@kubernetes/kubectl
@fabianofranz fyi
Automatic merge from submit-queue
Change kubectl create to use dynamic client
https://github.com/kubernetes/kubernetes/issues/16764https://github.com/kubernetes/kubernetes/issues/3955
This is a series of changes to allow kubectl create to use discovery-based REST mapping and dynamic clients.
cc @kubernetes/sig-api-machinery
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
kubectl will no longer do client-side defaulting on create and replace.
```
Automatic merge from submit-queue
Added warning msg for `kubectl get`
- added warning description regarding terminated pods to `get` long help message
- added printing of warning message in case of `get pods` if there are hidden pods
Fixes#22986 (initiall PR and discussion are here #26417)
## **Output examples:**
### # kubectl get pods
```
NAME READY STATUS RESTARTS AGE
dapi-test-pod1 0/1 Terminating 0 22h
liveness-http 0/1 CrashLoopBackOff 11245 22d
ubuntu1-1206318548-oh9tc 0/1 CrashLoopBackOff 2336 8d
info: 1 completed object(s) was(were) not shown in pods list. Pass --show-all to see all objects.
```
### # kubectl get pods,namespaces
```
NAME READY STATUS RESTARTS AGE
po/dapi-test-pod1 0/1 Terminating 0 22h
po/liveness-http 1/1 Running 11242 22d
po/ubuntu1-1206318548-oh9tc 0/1 CrashLoopBackOff 2335 8d
info: 1 completed object(s) was(were) not shown in pods list. Pass --show-all to see all objects.
NAME STATUS AGE
ns/default Active 89d
ns/kube-system Active 41d
```
### # kubectl get pods -a
```
NAME READY STATUS RESTARTS AGE
busybox 0/1 Error 0 27d
dapi-test-pod1 0/1 Terminating 0 22h
liveness-http 0/1 CrashLoopBackOff 11245 22d
ubuntu1-1206318548-oh9tc 0/1 CrashLoopBackOff 2336 8d
```
### # kubectl get -h
```
Display one or many resources.
Possible resource types include (case insensitive): pods (aka 'po'), services (aka 'svc'), deployments (aka 'deploy'),
replicasets (aka 'rs'), replicationcontrollers (aka 'rc'), nodes (aka 'no'), events (aka 'ev'), limitranges (aka 'limits'),
persistentvolumes (aka 'pv'), persistentvolumeclaims (aka 'pvc'), resourcequotas (aka 'quota'), namespaces (aka 'ns'),
serviceaccounts (aka 'sa'), ingresses (aka 'ing'), horizontalpodautoscalers (aka 'hpa'), daemonsets (aka 'ds'), configmaps (aka 'cm'),
componentstatuses (aka 'cs), endpoints (aka 'ep'), petsets (alpha feature, may be unstable) and secrets.
This command will hide resources that have completed. For instance, pods that are in the Succeeded or Failed phases.
You can see the full results for any resource by providing the '--show-all' flag.
By specifying the output as 'template' and providing a Go template as the value
of the --template flag, you can filter the attributes of the fetched resource(s).
Examples:
.........
````
- added warning description regarding terminated objects to `get` long help message
- added printing of warning message in case of `get pods` if there are hidden pods
Fixes#22986
Automatic merge from submit-queue
Make more messages respect --quiet flag
Make following two messages respect `--quiet` in `kubectl run`
- `If you don't see a command prompt, try pressing enter.`
- `Pod "name" deleted`
Ref #28695
Automatic merge from submit-queue
Add zsh compatibility note `completion` cmd help
zsh completions are not supported on zsh versions < 5.2.
This patch advices user on supported versions of zsh when using the `completion`
command to avoid potential UX failure.
##### After
`$ kubectl completion -h`
```
Output shell completion code for the given shell (bash or zsh).
This command prints shell code which must be evaluation to provide interactive
completion of kubectl commands.
Examples:
$ source <(kubectl completion bash)
will load the kubectl completion code for bash. Note that this depends on the
bash-completion framework. It must be sourced before sourcing the kubectl
completion, e.g. on the Mac:
$ brew install bash-completion
$ source $(brew --prefix)/etc/bash_completion
$ source <(kubectl completion bash)
If you use zsh*, the following will load kubectl zsh completion:
$ source <(kubectl completion zsh)
* zsh completions are only supported in versions of zsh >= 5.2
```
```release-note
release-note-none
```
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.kubernetes.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.kubernetes.io/reviews/kubernetes/kubernetes/30460)
<!-- Reviewable:end -->
Automatic merge from submit-queue
Implement 'kubectl top' command
```release-note
Added 'kubectl top' command showing the resource usage metrics.
```
Sample output:
Nodes:
```
$ kubectl top node
NAME CPU MEMORY STORAGE TIMESTAMP
kubernetes-minion-group-xxxx 76m 1468 Mi 0 Mi Tue, 12 Jul 2016 17:37:00 +0200
kubernetes-minion-group-yyyy 73m 1511 Mi 0 Mi Tue, 12 Jul 2016 17:37:00 +0200
kubernetes-minion-group-zzzz 46m 1506 Mi 0 Mi Tue, 12 Jul 2016 17:37:00 +0200
kubernetes-master 76m 2059 Mi 0 Mi Tue, 12 Jul 2016 17:37:00 +0200
```
Pods in all namespaces:
```
$ kubectl top pod --all-namespaces
NAMESPACE NAME CPU MEMORY STORAGE TIMESTAMP
default nginx-1111111111-zzzzz 0m 1 Mi 0 Mi Tue, 12 Jul 2016 17:49:00 +0200
kube-system etcd-server-kubernetes-master 4m 116 Mi 0 Mi Tue, 12 Jul 2016 17:49:00 +0200
kube-system fluentd-cloud-logging-kubernetes-minion-group-xxxx 14m 110 Mi 0 Mi Tue, 12 Jul 2016 17:49:00 +0200
kube-system kube-dns-v18-zzzzz 1m 6 Mi 0 Mi Tue, 12 Jul 2016 17:49:00 +0200
...
```
Pod with containers:
```
$ kubectl top pod heapster-v1.1.0-1111111111-miail --namespace=kube-system --containers
NAMESPACE NAME CPU MEMORY STORAGE TIMESTAMP
kube-system heapster-v1.1.0-1111111111-miail 1m 42 Mi 0 Mi Tue, 12 Jul 2016 17:52:00 +0200
heapster 1m 26 Mi 0 Mi
eventer 0m 3 Mi 0 Mi
heapster-nanny 0m 6 Mi 0 Mi
eventer-nanny 0m 6 Mi 0 Mi
```
ref #11382
[]()
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.kubernetes.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.kubernetes.io/reviews/kubernetes/kubernetes/28844)
<!-- Reviewable:end -->
Automatic merge from submit-queue
return err on `kubectl run --image` with invalid value
When running `kubectl run <configname> --image="Invalid$$%ImageValue%%__"`, a configuration is successfully created with an image name that is not a valid value for an image reference.
This patch validates that the image name is a valid image reference, and returns an error before creating a config if an invalid value is passed.
`$ kubectl run test --image="Invalid__%imagename"`
```
error: Invalid image name "Invalid__%imagename": invalid reference format
```
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.kubernetes.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.kubernetes.io/reviews/kubernetes/kubernetes/30162)
<!-- Reviewable:end -->
Automatic merge from submit-queue
check validation with no apps client in kubectl util factory
autoscaling client already exist:
if c.c.AutoscalingClient == nil {
return errors.New("unable to validate: no autoscaling client")
so following autoscaling client should be apps client:
if c.c.AppsClient == nil {
return errors.New("unable to validate: no autoscaling client")
}
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.kubernetes.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.kubernetes.io/reviews/kubernetes/kubernetes/30362)
<!-- Reviewable:end -->
Automatic merge from submit-queue
Update scale cmd help to display duration "units" in --timeout usage
release-note-none
`kubectl scale` has `--timeout` option, but the help info does not give accepted time units.
The help info gives default value 0 without a unit, potentially misleading a user into thinking they need to pass the numbered time only.
<!-- Reviewable:start -->
---
This change is [<img src="https://reviewable.kubernetes.io/review_button.svg" height="34" align="absmiddle" alt="Reviewable"/>](https://reviewable.kubernetes.io/reviews/kubernetes/kubernetes/30022)
<!-- Reviewable:end -->
Automatic merge from submit-queue
kubectl config set-crentials: add arguments for auth providers
This PR adds `--auth-provider` and `--auth-provider-arg` flags to the
`kubectl config set-credentials` sub-command.
There's currently no way of interacting with the new auth provider framework added in #23066 through kubectl. You have to render a custom kubeconfig to use them. Additionally `kubectl config set` just sort of craps out when attempting to interact with authentication info objects (#29312).
This is a minimal implementation of allowing `kubect config set-credentials` to set fields for client auth providers.
cc @cjcullen @kubernetes/kubectl
Automatic merge from submit-queue
Run goimport for the whole repo
While removing GOMAXPROC and running goimports, I noticed quite a lot of other files also needed a goimport format. Didn't commit `*.generated.go`, `*.deepcopy.go` or files in `vendor`
This is more for testing if it builds.
The only strange thing here is the gopkg.in/gcfg.v1 => github.com/scalingdata/gcfg replace.
cc @jfrazelle @thockin
Automatic merge from submit-queue
replace improper create quota alias
`q` is not a shortname for `resourcequota`, so it shouldn't be an alias for `kubectl create resourcequota`.
@sttts ptal
Automatic merge from submit-queue
fix annotate.go single resource check
```release-note
Fix issue with kubectl annotate when --resource-version is provided.
```
When using `kubectl annotate` with a `--resource-version` on a resource, such as `kubectl annotate pod <pod_name> --resource-version=1820 description='myannotation'`, the command fails with the error: `error: --resource-version may only be used with a single resource`.
Upon printing the output of `resources` that the annotate command receives from cli args, it prints: `Resources:[pod <pod_name>]`. In other words, it treats the name of the resource as a second resource. This PR addresses this issue by using the resource builder `Singular` flag to determine if only a single resource was passed.
Automatic merge from submit-queue
Refactoring runner resource container linedelimiter to it's own pkg
Continuing my work ref #15634
Anyone is ok to review this fix.
Automatic merge from submit-queue
allow watching old resources with kubectl
Right now, one can not watch a resource with kubectl whose resourceVersion is outside the etcd watch window. Specifying resourceVersion=0 returns the current object, then watches from the current index.
This PR changes the logic to use resourceVersion=0, which will work regardless of the resourceVersion of the object, and discard the first event if --watch-only is specified.
@ncdc @aveshagarwal
Automatic merge from submit-queue
Create client from API version passed in config or use default
When creating a client read the `GroupVersion` value passed in the `restclient.Config`. If the passed `GroupVersion` does not match current group or is not enabled fallback to default `GroupVersion` for that group.
This PR should allow accessing `ScheduledJob` properly in `batch/v2alpha1`.
@smarterclayton @deads2k @caesarxuchao @lavalamp ptal
Automatic merge from submit-queue
Add a flag for `kubectl expose`to set ClusterIP and allow headless services
- Use `--cluster-ip=None` to create a headless service
- Fixes#10294
Automatic merge from submit-queue
Fix kubectl help command
PR 48d47b1027 broke `kubectl help` command due
to wrong check `help for help cmd` .
Fixes#29736
Automatic merge from submit-queue
fix kubectl rolling update empty file cause panic issue
```release-note
Fix issue with kubectl panicing when passed files that do not exist.
```
Fix#29398
@pwittrock @justinsb ptal. This just fix on the cmd layer, I am thinking whether we should return err from marshal&unmarshal if the reader is empty.
When creating a client read the GroupVersion value passed in the
restclient.Config. If the passed GroupVersion does not match current
group or is not enabled fallback to default GroupVersion for that group.
Automatic merge from submit-queue
Validation logic applied to edited file
The file that is submitted via ``edit`` is now subject to validation
logic as any other file. The validation flags were added to the ``edit``
command.
Fixes: #17542
Automatic merge from submit-queue
Fix Windows terminal handling
Fix some issues with Windows terminal handling with respect to TTYs that came up as part of the
code that adds support for terminal resizing.
cc @smarterclayton @sttts @csrwng
Automatic merge from submit-queue
Make sure --record=false is acknowledged when passed to commands
```release-note
Change setting "kubectl --record=false" to stop updating the change-cause when a previous change-cause is found.
```
Ensures that when `--record=false` is explicity set that no `ChangeCauseAnnotation`s are set on the object. Previously, if `--record=true` was used then all following actions triggered a `ChangeCauseAnnotation` even if `--record=false` was set, due to the prior `ChangeCauseAnnotation` existing.
Reference to bug report: https://bugzilla.redhat.com/show_bug.cgi?id=1351127
[]()
Automatic merge from submit-queue
Implement a RESTMappings method
With the introduction of batch/v1 and batch/v2alpha1, any
MultiRESTMapper that has per groupversion mappers (as a naive discovery
client would create) would end up being unable to call RESTMapping() on
batch.Jobs. As we finish up discovery we will need to be able to choose
prioritized RESTMappings based on the service discovery doc.
This change implements RESTMappings(groupversion) which returns all
possible RESTMappings for that kind. That allows a higher level call to
prioritize the returned mappings by server or client preferred version.
@deads2k
The file that is submitted via edit is now subject to validation
logic as any other file. The validation flags were added to the edit
command.
Fixes: #17542
Automatic merge from submit-queue
Support terminal resizing for exec/attach/run
```release-note
Add support for terminal resizing for exec, attach, and run. Note that for Docker, exec sessions
inherit the environment from the primary process, so if the container was created with tty=false,
that means the exec session's TERM variable will default to "dumb". Users can override this by
setting TERM=xterm (or whatever is appropriate) to get the correct "smart" terminal behavior.
```
Fixes#13585
With the introduction of batch/v1 and batch/v2alpha1, any
MultiRESTMapper that has per groupversion mappers (as a naive discovery
client would create) would end up being unable to call RESTMapping() on
batch.Jobs. As we finish up discovery we will need to be able to choose
prioritized RESTMappings based on the service discovery doc.
This change implements RESTMappings(groupversion) which returns all
possible RESTMappings for that kind. That allows a higher level call to
prioritize the returned mappings by server or client preferred version.
Add support for terminal resizing for exec, attach, and run. Note that for Docker, exec sessions
inherit the environment from the primary process, so if the container was created with tty=false,
that means the exec session's TERM variable will default to "dumb". Users can override this by
setting TERM=xterm (or whatever is appropriate) to get the correct "smart" terminal behavior.
Automatic merge from submit-queue
kubectl: refactor rollout history to be more configurable
ChangeCauseAnnotation is hardcoded in PrintRolloutHistory and it needs
to be overriden since other resources that may need to be added in
`kubectl rollout history` may not use it. Instead of adding one more
method in the factory, refactor the existing HistoryViewer interface
to accomodate the change.
@kubernetes/kubectl
ChangeCauseAnnotation is hardcoded in PrintRolloutHistory and it needs
to be overriden since other resources that may need to be added in
`kubectl rollout history` may not use it. Instead of adding one more
method in the factory, refactor the existing HistoryViewer interface
to accomodate the change.
Automatic merge from submit-queue
--no-header available now for custom-column
Change `CustomColumnsPrinter` to have `noHeader` boolean, also changed `GetPrinter` to receive this bool and pass it through.
One test `TestNewColumnPrinterFromSpecWithNoHeaders` added for checking if there is no headers in output for sure
fixes#24133
Automatic merge from submit-queue
Include petsets in kubectl valid commands
Petsets are already implemented in kubectl, but there were no hints
for that subcommand.
Fixes#25615
Search and replace for references to moved examples
Reverted find and replace paths on auto gen docs
Reverting changes to changelog
Fix bugs in test-cmd.sh
Fixed path in examples README
ran update-all successfully
Updated verify-flags exceptions to include renamed files
Automatic merge from submit-queue
Follow up to PR 25640 - Cleanup newline and tweak help text
Follow up to PR https://github.com/kubernetes/kubernetes/pull/25640
* Remove redundant newline below Aliases:
* Renaming "Available Commands:" to "Available Sub-commands:"
Automatic merge from submit-queue
Remove unneeded continute
very minor but I noticed and it and it bugged me :-)
Signed-off-by: Doug Davis <dug@us.ibm.com>
Automatic merge from submit-queue
kubectl should print usage at the bottom
Override the Usage: output using SetUsageTemplate. Just moved
the strings in the template to make sure we print Usage: at
the bottom of the output and not at the top.
Fixes issue #7496
Automatic merge from submit-queue
kubectl/autoscale: fix tips when validating --max flag
While autoscaling, it was not clear what was the reason of failed --max flag validation.
This fix divides reasons to:
- value not provided or too low
- value of max is lower than value of min
bug 1336632
Bugzilla link: https://bugzilla.redhat.com/show_bug.cgi?id=1336632
Override the Usage: output using SetUsageTemplate. Just moved
the strings in the template to make sure we print Usage: at
the bottom of the output and not at the top.
Fixes issue 7496
Automatic merge from submit-queue
Use `CreatedByAnnotation` constant
A nit but didn't want the strings to get out of sync.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Automatic merge from submit-queue
Update "kubectl get all" to display resource type as part of name
fixes#23838
release-note-none
When running "kubectl get all", or printing any output with mixed resource kinds, an additional column is added to the output with each resource's kind:
`kubectl get all --all-namespaces`
```
NAMESPACE NAME DESIRED CURRENT AGE
default rc/docker-registry-1 1 1 23h
testproject rc/node-1 0 0 2d
NAMESPACE NAME CLUSTER-IP EXTERNAL-IP PORT(S) AGE
default svc/docker-registry 172.30.36.42 <none> 5000/TCP 23h
default svc/kubernetes 172.30.0.1 <none> 443/TCP,53/UDP,53/TCP 7d
testproject svc/ruby-ex 172.30.187.128 <none> 8080/TCP 6d
NAMESPACE NAME READY STATUS RESTARTS AGE
default po/docker-registry-1-cpf8o 1/1 Running 1 23h
```
[]()
Automatic merge from submit-queue
kubectl: don't display an empty list when trying to get a single resource that isn't found
Return immediately when attempting to get a singular resource that isn't found, so that we avoid
printing out a List if the output format is something like json or yaml.
Before:
```
$ kubectl get pod/foo -o yaml
apiVersion: v1
items: []
kind: List
metadata: {}
pods "foo" not found
```
After:
```
$ kubectl get pod/foo -o yaml
pods "foo" not found
```
Fixes#28243
@kubernetes/kubectl @kubernetes/rh-ux @smarterclayton @liggitt @deads2k @metral
Automatic merge from submit-queue
Implement custom help command for kubectl
```release-note
* kubectl help now provides "Did you mean this?" suggestions for typo/invalid command names.
```
Custom implementation of help command allows to print `Did you mean this?` with
suggestions, which is missed in embed help command from github.com/spf13/cobra
Also, it can be extended with different search features. At this patch, help
command searches query in short descriptions of commands in case of mismatch
with commands names.
fixes#25234
Own implemenation of help command allows to print `Did you mean this?` with
suggestions, which is missed in embed help command from github.com/spf13/cobra
Also, it can be extended with different search features. At this patch, help
command search query in short descriptions of commands in case of mismatch
with commands names.
fixes#25234
Return immediately when attempting to get a singular resource that isn't found, so that we avoid
printing out a List if the output format is something like json or yaml.
Before:
```
$ kubectl get pod/foo -o yaml
apiVersion: v1
items: []
kind: List
metadata: {}
pods "foo" not found
```
After:
```
$ kubectl get pod/foo -o yaml
pods "foo" not found
```
Automatic merge from submit-queue
Fixed misleading error message when a resource with no selector or na…
Commit:
- Fixed misleading error message when a resource with no selector or name is provided to kubectl delete or label command
This commit fixes#25541
Automatic merge from submit-queue
kubectl attach: error out for non-existing containers
Currently, kubectl attach falls back to the first container which is pretty confusing.
Based on https://github.com/kubernetes/kubernetes/pull/27541.
Automatic merge from submit-queue
TLS bootstrap API group (alpha)
This PR only covers the new types and related client/storage code- the vast majority of the line count is codegen. The implementation differs slightly from the current proposal document based on discussions in design thread (#20439). The controller logic and kubelet support mentioned in the proposal are forthcoming in separate requests.
I submit that #18762 ("Creating a new API group is really hard") is, if anything, understating it. I've tried to structure the commits to illustrate the process.
@mikedanese @erictune @smarterclayton @deads2k
```release-note-experimental
An alpha implementation of the the TLS bootstrap API described in docs/proposals/kubelet-tls-bootstrap.md.
```
[]()
Automatic merge from submit-queue
Dedent
Adding the dedent package and then applying it to the kubectl help commands. Also updating the documentation to reflect the use of dedent.
The one side effect is that for the "kubectl help" commands a newline
is prepended to output, which will alter the yaml output.
Here we use dedent to format the code to match the output.
hack/update-generated-docs.sh has been run and the affected files have
been added.
Note: for describe.go we added a period to the end of an output message.
Automatic merge from submit-queue
Fix attach command for InitContainers
Added InitContainers to the things that GetContainer in attach.go has to look for to find a container to attach. Also test case added.
fixes#27540
Automatic merge from submit-queue
Add not-running check to kubectl-exec
Different cases:
- pod is started, container terminated:
```
error: error executing remote command: error executing command in container: container not found ("sleep1")
```
- pod has terminated:
```
error: cannot exec into a container in a completed pod; current phase is Succeeded
```
- container does not exist in pod spec:
```
Error from server: container foo is not valid for pod multi-container
```
Fixes https://github.com/openshift/origin/issues/8472#event-681794952
Automatic merge from submit-queue
Dynamically derive AttachOptions.CommandName
This PR sets AttachOptions.CommandName dynamically depending on the corba Command
hierarchy. If the root command is named e.g. "oc" (for the OpenShift cli) this
will result in "oc attach" instead of the static "kubectl attach" before this
patch.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1341450
Automatic merge from submit-queue
let patch use --local flag like `kubectl set image`
Adds the concept of a `--local` flag to `kubectl patch`. This flag is similar to `kubectl set image -f --local` because it will use the content of the file as the input to the patch operation instead of using the file content to file resource/name tuples.
This pull lets you run something like `kubectl create deployment --dry-run -o yaml | kubectl set volume --local -f - -o yaml | kubectl patch --local -f - --patch {} | kubectl create -f -`
As proof that it works, you can run against a local file just to mess around with it, but `--local -f -` is the most likely case.
```
$kubectl patch --local -f pkg/api/validation/testdata/v1/validPod.yaml --patch='{"spec": {"restartPolicy":"Never"}}'
apiVersion: v1
kind: Pod
metadata:
creationTimestamp: null
labels:
name: redis-master
name: name
spec:
containers:
- args:
- this
- is
- an
- ok
- command
image: gcr.io/fake_project/fake_image:fake_tag
name: master
resources: {}
restartPolicy: Never
status: {}
```
This is useful for setting rarely used, but immutable fields from `kubectl create` or `kubectl convert` without dropping to an interactive editor.
Some discussion here: https://github.com/kubernetes/kubernetes/issues/21648#issuecomment-218579977
@smarterclayton @kubernetes/kubectl
@eparis @soltysh @stevekuznetsov we've talked about this separately
This sets AttachOptions.CommandName dynamically depending on the corba Command
hierarchy. If the root command is named e.g. "oc" (for the OpenShift cli) this
will result in "oc attach" instead of the static "kubectl attach" before this
patch.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1341450
Automatic merge from submit-queue
fix recursive & non-recursive kubectl get of generic output format
This PR fixes the issues with `kubectl get` in https://github.com/kubernetes/kubernetes/issues/26466
Changes made:
- fix printing when using the generic output format in both non-recursive & recurvise settings to ensure that errors are being shown
- add tests to check printing generic output in a **non-recursive** setting with non-existent pods
- clean up the **recursive** `kubectl get` tests
/cc @janetkuo
