Most of our communications from apiserver -> nodes used
nodutil.GetNodeHostIP, but a few places didn't - and this
meant that the node name needed to be resolvable _and_ we needed
to populate valid IP addresses.
Fix the last few places that used the NodeName.
Issue #18525
Issue #9451
Issue #9728
Issue #17643
Issue #11543
Issue #22063
Issue #2462
Issue #22109
Issue #22770
Issue #32286
Automatic merge from submit-queue
Fixes in HPA: consider only running pods; proper denominator in avg.
Fixes in HPA: consider only running pods; proper denominator in avg request calculations.
Automatic merge from submit-queue
Support Access-Control-Expose-Headers in CORS Handler
Our typical HTTP Response has a "Date" Header, if we don't add an
additional http header "Access-Control-Expose-Headers: Date" then
the browser based clients cannot use the Date HTTP Header.
Fixes#33231
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
When CORS Handler is enabled, we now add a new HTTP header named "Access-Control-Expose-Headers" with a value of "Date". This allows the "Date" HTTP header to be accessed from XHR/JavaScript.
```
Automatic merge from submit-queue
add linebreak between resource groups
**Release note**:
```release-note
release-note-none
```
Printing multiple groups via `kubectl get all` can produce output that is
hard to read in cases where there are a lot of resource types to display
/ some resource types contain varying column amounts.
This patch adds a linebreak above each group of resources only when
there is more than one group to display, and always omitting the
linebreak above the first group. This makes for slightly improved
output.
Linebreaks are printed to stderr, and honor the `--no-headers` option.
**Before**
```
$ kubectl get all
NAME READY STATUS RESTARTS AGE
po/database-1-u9m9l 1/1 Running 3 5d
po/idling-echo-1-9fmz6 2/2 Running 8 5d
po/idling-echo-1-gzb0v 2/2 Running 4 5d
NAME DESIRED CURRENT READY AGE
rc/database-1 1 1 1 6d
rc/idling-echo-1 2 2 2 6d
NAME CLUSTER-IP EXTERNAL-IP PORT(S)
AGE
svc/database 172.30.11.104 <none> 5434/TCP
6d
svc/frontend 172.30.196.217 <none> 5432/TCP
6d
svc/idling-echo 172.30.115.67 <none> 8675/TCP,3090/UDP
6d
svc/kubernetes 172.30.0.1 <none> 443/TCP,53/UDP,53/TCP
6d
svc/mynodeport 172.30.81.254 <nodes> 8080/TCP
5d
svc/mynodeport1 172.30.198.193 <nodes> 8080/TCP
5d
svc/mynodeport2 172.30.149.48 <nodes> 8080/TCP
5d
svc/mynodeport3 172.30.195.235 <nodes> 8080/TCP
5d
```
**After**
```
$ kubectl get all
NAME READY STATUS RESTARTS AGE
po/database-1-u9m9l 1/1 Running 3 5d
po/idling-echo-1-9fmz6 2/2 Running 8 5d
po/idling-echo-1-gzb0v 2/2 Running 4 5d
NAME DESIRED CURRENT READY AGE
rc/database-1 1 1 1 6d
rc/idling-echo-1 2 2 2 6d
NAME CLUSTER-IP EXTERNAL-IP PORT(S)
AGE
svc/database 172.30.11.104 <none> 5434/TCP
6d
svc/frontend 172.30.196.217 <none> 5432/TCP
6d
svc/idling-echo 172.30.115.67 <none> 8675/TCP,3090/UDP
6d
svc/kubernetes 172.30.0.1 <none> 443/TCP,53/UDP,53/TCP
6d
svc/mynodeport 172.30.81.254 <nodes> 8080/TCP
5d
svc/mynodeport1 172.30.198.193 <nodes> 8080/TCP
5d
svc/mynodeport2 172.30.149.48 <nodes> 8080/TCP
5d
svc/mynodeport3 172.30.195.235 <nodes> 8080/TCP
5d
```
cc @fabianofranz @liggitt
KubeletClient implements ConnectionInfoGetter, but it is not a complete
implementation: it does not set the kubelet port from the node record,
for example.
By renaming the method so that it does not implement the interface, we
are able to cleanly see where the "raw" GetConnectionInfo is used (it is
correct) and also have go type-checking enforce this for us.
Automatic merge from submit-queue
suggest use of `kube explain <resource>` in kube get output
**Release note**:
```release-note
release-note-none
```
This patch improves usability flow, making it easier for a user to
discover the command `kube explain <resource>` through `kube get` output.
##### After
```
$ kube get
You must specify the type of resource to get. Valid resource types include:
* componentstatuses (aka 'cs')
* configmaps (aka 'cm')
* daemonsets (aka 'ds')
* deployments (aka 'deploy')
* events (aka 'ev')
* endpoints (aka 'ep')
* horizontalpodautoscalers (aka 'hpa')
* ingress (aka 'ing')
* jobs
* limitranges (aka 'limits')
* nodes (aka 'no')
* namespaces (aka 'ns')
* petsets (alpha feature, may be unstable)
* pods (aka 'po')
* persistentvolumes (aka 'pv')
* persistentvolumeclaims (aka 'pvc')
* quota
* resourcequotas (aka 'quota')
* replicasets (aka 'rs')
* replicationcontrollers (aka 'rc')
* secrets
* serviceaccounts (aka 'sa')
* services (aka 'svc')
error: Required resource not specified.
Use "kubectl explain <resource>" for a detailed description of that resource (e.g. kubectl explain pods).
See 'kubectl get -h' for help and examples.
```
Automatic merge from submit-queue
Change minion to node
Continuation of #1111
I tried to keep this PR down to just a simple search-n-replace to keep
things simple. I may have gone too far in some spots but its easy to
roll those back if needed - just let me know.
I avoided renaming `contrib/mesos/pkg/minion` because there's already
a `contrib/mesos/pkg/node` dir and fixing that will require a bit of work
due to a circular import chain that pops up. So I'm saving that for a
follow-on PR.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Automatic merge from submit-queue
Pod creation moved outside of docker manager tests
**What this PR does / why we need it**:
It cleans up docker manager tests a little.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)*: related to #31550
**Special notes for your reviewer**:
I don't claim that working on this issue is finished, I cleaned up the tests just a bit
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
CRI: Add more docs abount pod sandbox config in CreateContainerRequest.
Makes it clear that the config will not change during the pod lifecycle.
The field is only for convenience.
Our typical HTTP Response has a "Date" Header, if we don't add an
additional http header "Access-Control-Expose-Headers: Date" then
the browser based clients cannot use the Date HTTP Header.
Fixes#33231
Automatic merge from submit-queue
Store RequestInfo in Context instead of RequestInfoResolver dependency injection
**Depends on https://github.com/kubernetes/kubernetes/pull/33478**
The `RequestInfoResolver` is used in the proxy handler and in the authorization code. It is passed through half of the apiserver code base to be available at those locations. This PR uses the context instead, which is our natural dependency injection mechanism in the handlers.
`RequestInfo` and all tooling around is moved to `pkg/apiserver/request` temporarily to avoid dependency cycles. This is necessary as long as `pkg/apiserver` implements the proxy and other handlers. Those might move to `pkg/apiserver/handlers` probably later.
Printing multiple groups via `kubectl get all` can produce output that is
hard to read in cases where there are a lot of resource types to display
/ some resource types contain varying column amounts.
This patch adds a linebreak above each group of resources only when
there is more than one group to display, and always omitting the
linebreak above the first group. This makes for slightly improved
output.
Linebreaks are printed to stderr, and honor the `--no-headers` option.
**Before**
```
$ kubectl get all
NAME READY STATUS RESTARTS AGE
po/database-1-u9m9l 1/1 Running 3 5d
po/idling-echo-1-9fmz6 2/2 Running 8 5d
po/idling-echo-1-gzb0v 2/2 Running 4 5d
NAME DESIRED CURRENT READY AGE
rc/database-1 1 1 1 6d
rc/idling-echo-1 2 2 2 6d
NAME CLUSTER-IP EXTERNAL-IP PORT(S)
AGE
svc/database 172.30.11.104 <none> 5434/TCP
6d
svc/frontend 172.30.196.217 <none> 5432/TCP
6d
svc/idling-echo 172.30.115.67 <none> 8675/TCP,3090/UDP
6d
svc/kubernetes 172.30.0.1 <none> 443/TCP,53/UDP,53/TCP
6d
svc/mynodeport 172.30.81.254 <nodes> 8080/TCP
5d
svc/mynodeport1 172.30.198.193 <nodes> 8080/TCP
5d
svc/mynodeport2 172.30.149.48 <nodes> 8080/TCP
5d
svc/mynodeport3 172.30.195.235 <nodes> 8080/TCP
5d
```
**After**
```
$ kubectl get all
NAME READY STATUS RESTARTS AGE
po/database-1-u9m9l 1/1 Running 3 5d
po/idling-echo-1-9fmz6 2/2 Running 8 5d
po/idling-echo-1-gzb0v 2/2 Running 4 5d
NAME DESIRED CURRENT READY AGE
rc/database-1 1 1 1 6d
rc/idling-echo-1 2 2 2 6d
NAME CLUSTER-IP EXTERNAL-IP PORT(S)
AGE
svc/database 172.30.11.104 <none> 5434/TCP
6d
svc/frontend 172.30.196.217 <none> 5432/TCP
6d
svc/idling-echo 172.30.115.67 <none> 8675/TCP,3090/UDP
6d
svc/kubernetes 172.30.0.1 <none> 443/TCP,53/UDP,53/TCP
6d
svc/mynodeport 172.30.81.254 <nodes> 8080/TCP
5d
svc/mynodeport1 172.30.198.193 <nodes> 8080/TCP
5d
svc/mynodeport2 172.30.149.48 <nodes> 8080/TCP
5d
svc/mynodeport3 172.30.195.235 <nodes> 8080/TCP
5d
```
Contination of #1111
I tried to keep this PR down to just a simple search-n-replace to keep
things simple. I may have gone too far in some spots but its easy to
roll those back if needed.
I avoided renaming `contrib/mesos/pkg/minion` because there's already
a `contrib/mesos/pkg/node` dir and fixing that will require a bit of work
due to a circular import chain that pops up. So I'm saving that for a
follow-on PR.
I rolled back some of this from a previous commit because it just got
to big/messy. Will follow up with additional PRs
Signed-off-by: Doug Davis <dug@us.ibm.com>
Because of how our test environment was setup, we didn’t notice that we were assuming the load balancer hosts list to be IP addresses, while they actually are hostnames.
Also updated some comments and added a check to prevent trying to release a public IP if we don’t have one.
Automatic merge from submit-queue
Simplify genericapiserver tests
- create empty GenericApiServier object outside helper
- set default Config values everywhere because they are set anyway
The current default behavior of `kubectl get` is to return an empty
output when there are no resources to display. This patch improves
usability by returning a warning through stderr in the case of an empty
list.
Automatic merge from submit-queue
Fix TestCreateWithNonExistentOwner
Fix#30228
As https://github.com/kubernetes/kubernetes/issues/30228#issuecomment-248779567 described, the GC did delete the garbage, it's the test logic failed.
The test used to rely on `gc.QueuesDrained()`, which could return before the GC finished processing. It seems to be the only possible reason of the test failure. Hence, this PR changed the test to poll for the deletion of garbage.
Automatic merge from submit-queue
MinReadySeconds / AvailableReplicas for ReplicaSets
This PR adds minReadySeconds and availableReplicas for replica sets / replication controllers
Partially addresses https://github.com/kubernetes/kubernetes/issues/28381
cc: @mfojtik
@bgrant0607 for the api changes, @janetkuo for controller changes
Automatic merge from submit-queue
Update federation controllers to use release 1.5 clientset
This PR is based on #32243, we won't merge it until next week, to make cherry-picks easier.
