Automatic merge from submit-queue
+optional tag for OpenAPI spec
OpenAPI rely on "omitempty" json tag to determine if a field is optional or not. This change will add "+optional" tag to all fields with "omitempty" json tag and support the tag in OpenAPI spec generator.
Automatic merge from submit-queue
controller: set minReadySeconds in deployment's replica sets
* Estimate available pods for a deployment by using minReadySeconds on
the replica set.
* Stop requeueing deployments on pod events, superseded by following the
replica set status.
* Cleanup redundant deployment utilities
Fixes https://github.com/kubernetes/kubernetes/issues/26079
@kubernetes/deployment ptal
Automatic merge from submit-queue
Pass whole PVC to provisioner plugins
Gluster provisioner is interested in namespace of PVCs that are being provisioned and I don't want to add at as a new field in `volume.VolumeOptions` - it would contain almost whole PVC.
Let's rework `VolumeOptions` and pass direct reference to PVC there instead of some "interesting" fields and let the provisioner to pick information it is interested in.
There was lot of refactoring in volume plugins to apply this change (too many plugins), however the logic is simple and it's all the same in all plugins.
@rootfs @humblec
Automatic merge from submit-queue
NodeController waits for informer sync before doing anything
cc @lavalamp @davidopp
```release-note
NodeController waits for full sync of all it's informers before taking any action.
```
Automatic merge from submit-queue
Run rbac authorizer from cache
RBAC authorization can be run very effectively out of a cache. The cache is a normal reflector backed cache (shared informer).
I've split this into three parts:
1. slim down the authorizer interfaces
1. boilerplate for adding rbac shared informers and associated listers which conform to the new interfaces
1. wiring
@liggitt @ericchiang @kubernetes/sig-auth
Automatic merge from submit-queue
Handle DeletedFinalStateUnknown in NodeController
Fix#34692
```release-note
Fix panic in NodeController caused by receiving DeletedFinalStateUnknown object from the cache.
```
cc @davidopp
* Estimate available pods for a deployment by using minReadySeconds on
the replica set.
* Stop requeueing deployments on pod events, superseded by following the
replica set status.
* Cleanup redundant deployment utilities
Automatic merge from submit-queue
Revert "Error out when any RS has more available pods then its spec r…
Reverts https://github.com/kubernetes/kubernetes/pull/29808
The PR is wrong because we can have more available pods than desired every time we scale down.
@kubernetes/deployment ptal
Automatic merge from submit-queue
Fix missleading comment
**What this PR does / why we need it**: It just fixes misleading comment. It took me some time to figure out real behavior.
Gluster provisioner is interested in pvc.Namespace and I don't want to add
at as a new field in VolumeOptions - it would contain almost whole PVC.
Let's pass direct reference to PVC instead and let the provisioner to pick
information it is interested in.
Automatic merge from submit-queue
Copy finalizers from template spec to pod.
**What this PR does / why we need it**: The PodTemplateSpec has a finalizers field whose contents are not copied over to a pod during creation.
Automatic merge from submit-queue
convert deployment controller to shared informers
Converts the deployment controller to shared informers.
@kargakis I think you've been in here. Pretty straight forward swap.
Fixes#27687
Automatic merge from submit-queue
controller: save older revisions for Deployment's replica sets
@jwforres the only usable way I could find for multiple old revisions for a single replica set is to stuff them as comma-separated values.
@kubernetes/deployment this retains old revisions served by a replica set inside an annotation.
Fixes https://github.com/kubernetes/kubernetes/issues/33844
Automatic merge from submit-queue
update deployment and replicaset listers
Updates the deployment lister to avoid copies and updates the deployment controller to use shared informers.
Pushing WIP to see which tests are broken.
Automatic merge from submit-queue
Delete evicted pet
If pet was evicted by kubelet - it will stuck in this state forever.
By analogy to regular pod we need to re-create pet so that it will
be re-scheduled to another node, so in order to re-create pet
and preserve consitent naming we will delete it in petset controller
and create after that.
fixes: https://github.com/kubernetes/kubernetes/issues/31098
Automatic merge from submit-queue
Fix issue in updating device path when volume is attached multiple times
When volume is attached, it is possible that the actual state
already has this volume object (e.g., the volume is attached to multiple
nodes, or volume was detached and attached again). We need to update the
device path in such situation, otherwise, the device path would be stale
information and cause kubelet mount to the wrong device.
This PR partially fixes issue #29324
When volume is attached, it is possible that the actual state
already has this volume object (e.g., the volume is attached to multiple
nodes, or volume was detached and attached again). We need to update the
device path in such situation, otherwise, the device path would be stale
information and cause kubelet mount to the wrong device.
This PR partially fixes issue #29324
Automatic merge from submit-queue
PetSet replica count status test
**What this PR does / why we need it**: It adds a test for PetSet status replica count. It should fail now, but will pass when https://github.com/kubernetes/kubernetes/pull/32117 is merged.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#31965
**Special notes for your reviewer**: It will need to be rebased after #32117 is merged in, don't need detailed review before that.
**Release note**:
```release-note
NONE
```
Added fakeKubeClient and other fake types needed to test what is sent to
API when replica count is updated. These fakes can be extended for
other tests.
Automatic merge from submit-queue
Fix TestCreateWithNonExistentOwner
Fix#30228
As https://github.com/kubernetes/kubernetes/issues/30228#issuecomment-248779567 described, the GC did delete the garbage, it's the test logic failed.
The test used to rely on `gc.QueuesDrained()`, which could return before the GC finished processing. It seems to be the only possible reason of the test failure. Hence, this PR changed the test to poll for the deletion of garbage.
Automatic merge from submit-queue
MinReadySeconds / AvailableReplicas for ReplicaSets
This PR adds minReadySeconds and availableReplicas for replica sets / replication controllers
Partially addresses https://github.com/kubernetes/kubernetes/issues/28381
cc: @mfojtik
@bgrant0607 for the api changes, @janetkuo for controller changes
Automatic merge from submit-queue
PetSet returns valid replica count in status
**What this PR does / why we need it**: It prevents the PetSet replica count to be invalid regardless of pods not being created due to
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#31965
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue
Use strongly-typed types.NodeName for a node name
We had another bug where we confused the hostname with the NodeName.
Also, if we want to use different values for the Node.Name (which is
an important step for making installation easier), we need to keep
better control over this.
A tedious but mechanical commit therefore, to change all uses of the
node name to use types.NodeName
Automatic merge from submit-queue
Refactor volume controller parameters into a structure
`persistentvolumecontroller.NewPersistentVolumeController` has 11 arguments now,
put them into a structure.
Also, rename `NewPersistentVolumeController` to `NewController`, `persistentvolume`
is already name of the package.
Fixes#30219
We had another bug where we confused the hostname with the NodeName.
To avoid this happening again, and to make the code more
self-documenting, we use types.NodeName (a typedef alias for string)
whenever we are referring to the Node.Name.
A tedious but mechanical commit therefore, to change all uses of the
node name to use types.NodeName
Also clean up some of the (many) places where the NodeName is referred
to as a hostname (not true on AWS), or an instanceID (not true on GCE),
etc.
Automatic merge from submit-queue
controller: don't retry deployments with overlapping selectors
Returning an error will cause the deployment to be requeued. We should
just emit an event for deployments with overlapping selectors and silently
drop then out of the queue. This should be transitioned to a Condition
once we have them.
@kubernetes/deployment ptal
In order to determine whether a node should run its daemon pod,
DaemonController creates a dummy pod based on DaemonSet's template and
then uses scheduler predicates (currently GeneralPredicates) to test
whether such pod can be run by the node. The problem was that
DaemonController was not setting Namespace for the dummy pod. This was
not affecting currently used GeneralPredicates but this problem could
bite later when some namespace-dependent predicates are added to
GeneralPredicates or directly to DaemonController's node checks
(e.g. pod affinity).
Stumbled upon it while working on e2e test for #31136
Returning an error will cause the deployment to be requeued. We should
just emit an event for deployments with overlapping selectors and silently
drop then out of the queue. This should be transitioned to a Condition
once we have them.
persistentvolumecontroller.NewPersistentVolumeController has 11 arguments now,
put them into a structure.
Also, rename NewPersistentVolumeController to NewController, persistentvolume
is already name of the package.
Fixes#30219
Automatic merge from submit-queue
Do not report error when deleting an attached volume
Persistent volume controller should not send warning events to a PV and mark the PV as failed when the volume is still attached.
This happens when a user quickly deletes a pod and associated PVC - PV is slowly detaching, while the PVC is already deleted and the PV enters Failed phase.
`Deleter.Deleter` can now return `tryAgainError`, which is sent as INFO to the PV to let the user know we did not forget to delete the PV, however the PV stays in Released state. The controller tries again in the next sync (15 seconds by default).
Fixes#31511
Automatic merge from submit-queue
simplify RC listers
Make the RC and SVC listers use the common list functions that more closely match client APIs, are consistent with other listers, and avoid unnecessary copies.
Automatic merge from submit-queue
Allow garbage collection to work against different API prefixes
The GC needs to build clients based only on Resource or Kind. Hoist the
restmapper out of the controller and the clientpool, support a new
ClientForGroupVersionKind and ClientForGroupVersionResource, and use the
appropriate one in both places.
Allows OpenShift to use the GC
Automatic merge from submit-queue
Remove hacks from ScheduledJobs cron spec parsing
Previusly `github.com/robfig/cron` library did not allow passing cron spec without seconds. First commit updates the library, which has additional method ParseStandard which follows the standard cron spec, iow. minute, hour, day of month, month, day of week.
@janetkuo @erictune as promised in #30227 I've updated the library and now I'm updating it in k8s
Automatic merge from submit-queue
Move HighWaterMark to the top of the struct in order to fix arm, second time
ref: #33117
Sorry for not fixing everyone at once, but I seriously wasn't prepared for that quick LGTM 😄, so here's the other half.
@lavalamp
> lgtm, but seriously, this is terrible, we probably have this bug all over. And what if someone embeds the etcdWatcher struct in something else not at the top? We need the compiler to enforce things like this, it just can't be done manually. Can you file or link a golang issue for this?
I totally agree! There isn't currently a way of programmatically detecting this unfortunately.
I guess @davecheney or @minux can explain better to you why it's so hard.
This is noted in https://github.com/kubernetes/kubernetes/blob/master/docs/proposals/multi-platform.md as a corner case indeed.
@pwittrock This should be cherrypicked toghether with #33117
Automatic merge from submit-queue
Fix race condition in setting node statusUpdateNeeded flag
This PR fixes the race condition in setting node statusUpdateNeeded flag
in master's attachdetach controller. This flag is used to indicate
whether a node status has been updated by the node_status_updater or
not. When updater finishes update a node status, it is set to false.
When the node status is changed such as volume is detached or new volume
is attached to the node, the flag is set to true so that updater can
update the status again. The previous workflow has a race condition as
follows
1. updater gets the currently attached volume list from the node which needs to be
updated.
2. A new volume A is attached to the same node right after 1 and set the
flag to TRUE
3. updater updates the node attached volume list (which does not include volume A) and then set the flag to FALSE.
The result is that volume A will be never added to the attached volume
list so at node side, this volume is never attached.
So in this PR, the flag is set to FALSE when updater tries to get the
attached volume list (as in an atomic operation). So in the above
example, after step 2, the flag will be TRUE again, in step 3, updater
does not set the flag if updates is sucessful. So after that, flag is
still TRUE and in next round of update, the node status will be updated.
This PR fixes the race condition in setting node statusUpdateNeeded flag
in master's attachdetach controller. This flag is used to indicate
whether a node status has been updated by the node_status_updater or
not. When updater finishes update a node status, it is set to false.
When the node status is changed such as volume is detached or new volume
is attached to the node, the flag is set to true so that updater can
update the status again. The previous workflow has a race condition as
follows
1. updater gets the currently attached volume list from the node which needs to be
updated.
2. A new volume A is attached to the same node right after 1 and set the
flag to TRUE
3. updater updates the node attached volume list (which does not include volume A) and then set the flag to FALSE.
The result is that volume A will be never added to the attached volume
list so at node side, this volume is never attached.
So in this PR, the flag is set to FALSE when updater tries to get the
attached volume list (as in an atomic operation). So in the above
example, after step 2, the flag will be TRUE again, in step 3, updater
does not set the flag if updates is sucessful. So after that, flag is
still TRUE and in next round of update, the node status will be updated.
This PR also changes a unit test due to the workflow changes
Automatic merge from submit-queue
Send recycle events from pod to pv.
This allows users to diagnose what's wrong with recycler. Recycler pods are started automatically with a cryptic name and they are deleted immediately when they finish.
e.g, `kubectl describe pv` could show that NFS cannot be mounted (and how many pods have tried it):
```
FirstSeen LastSeen Count From SubobjectPath Type Reason Message
--------- -------- ----- ---- ------------- -------- ------ -------
59m 59m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(5421800e-347b-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
53m 53m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(3c9809e5-347c-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
46m 46m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(250dd2a2-347d-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
40m 40m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(0d84ea33-347e-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
33m 33m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(f5fb63bf-347e-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
27m 27m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(de7128fd-347f-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
1h 3m 75 {persistentvolume-controller } Normal RecyclerPod Recycler pod: Successfully assigned recycler-for-nfs to 127.0.0.1
1h 3m 76 {persistentvolume-controller } Normal RecyclerPod Recycler pod: Pod was active on the node longer than specified deadline
1h 1m 12 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Error syncing pod, skipping: timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
20m 1m 4 {persistentvolume-controller } Warning RecyclerPod (events with common reason combined)
```
These steps were necessary:
- added event watcher to volume.RecycleVolumeByWatchingPodUntilCompletion
- pass all these events through volume plugins to volume controller
- rework volume.RecycleVolumeByWatchingPodUntilCompletion unit tests to a table (too much copy-paste)
- fix all unit tests along the way
The GC needs to build clients based only on Resource or Kind. Hoist the
restmapper out of the controller and the clientpool, support a new
ClientForGroupVersionKind and ClientForGroupVersionResource, and use the
appropriate one in both places.
Automatic merge from submit-queue
Fix FakeNodeHandler Update behaviour
Two problems:
1. Get is always using Existing nodes slice, and you will for sure miss any updated data
2. Each Update adds a duplicate node entry to UpdatedNodes slice
For the 1st, we will try to find a node in UpdatedNodes slice (same as for the List).
2nd - append only if there is no node with same name as updated, if there is we will replace object in UpdatedNodes slice.
Automatic merge from submit-queue
Refactor cert utils into one pkg, add funcs from bootkube for kubeadm to use
**What this PR does / why we need it**:
We have ended-up with rather incomplete and fragmented collection of utils for handling certificates. It may be worse to consider using `cfssl` for doing all of these things, but for now there is some functionality that we need in `kubeadm` that we can borrow from bootkube. It makes sense to move the utils from bookube into core, as discussed in #31221.
**Special notes for your reviewer**: I've taken the opportunity to review names of existing funcs and tried to make some improvements in that area (with help from @peterbourgon).
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
move registry packages for all API groups
This continues the pattern of `registry/<group>/resource` for our backing storage. This entire pull is nothing but moves. I'll reswizzle the actual storage next, but these are cargo-culted everywhere, so I want to lay this down early.
@sttts @ncdc
Automatic merge from submit-queue
simplify RC and SVC listers
Make the RC and SVC listers use the common list functions that more closely match client APIs, are consistent with other listers, and avoid unnecessary copies.
Spawn pet set with single replica and simple pod. They will have
conflicting hostPort definitions, and spawned on the same node.
As the result pet set pod, it will be created after simple pod, will be
in Failed state. Pet set controller will try to re-create it. After
verifying that pet set pod failed and was recreated atleast once, we will
remove pod with conflicting hostPort and wait until pet set pod will be in
running state.
Change-Id: I5903f5881f8606c696bd390df58b06ece33be88a
Automatic merge from submit-queue
controller: enhance timeout error message for Recreate deployments
Makes the error message from https://github.com/kubernetes/kubernetes/issues/29197 more obvious
@kubernetes/deployment
Prior to this, we would approve eviction as long as the current state of
the pods matched the budget. The new version requires that after the
eviction, the pods would still match the budget.
Also update tests to match.
Automatic merge from submit-queue
[Controller Manager] Fix endpoint controller hot loop and use utilruntime.HandleError to replace glog.Errorf
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
**Why**:
Fix endpoint controller hot loop and use `utilruntime.HandleError` to replace `glog.Errorf`
**What**
1. Fix endpoint controller hot loop in `pkg/controller/endpoint`
2. Fix endpoint controller hot loop in `contrib/mesos/pkg/service`
3. Sweep cases of `glog.Errorf` and use `utilruntime.HandleError` instead.
**Which issue this PR fixes**
Fixes#32843
Related issue is #30629
**Special notes for your reviewer**:
@deads2k @derekwaynecarr
The changes on `pkg/controller/endpoints_controller.go` and `contrib/mesos/pkg/service/endpoints_controller.go` are almost the same except `contrib/mesos/pkg/service/endpoints_controller.go` does not pass `podInformer` as the parameter of `NewEndpointController()`.
So, I didn't wait `podStoreSynced` before `syncService()`(Just leave it as it was). Will it lead to a problem?
Automatic merge from submit-queue
change factorization of listers to make them easier to add
`Listers` have a tremendous amount of duplicate code. This factors that out.
@smarterclayton ptal.
Automatic merge from submit-queue
convert daemonset controller to shared informers
Convert the daemonset controller completely to `SharedInformers` for its list/watch resources.
@kubernetes/rh-cluster-infra @ncdc
Automatic merge from submit-queue
Switch ScheduledJob controller to use clientset
**What this PR does / why we need it**:
This is part of #25442. I've applied here the same fix I've applied in the manual client in #29187, see the 1st commit for that (@caesarxuchao we've talked about it in #29856).
@deads2k as promised
@janetkuo ptal
Automatic merge from submit-queue
Add the uid in a delete event to the absentOwnerCache
This is a small optimization to further reduce the traffic sent by the GC.
In #31167, GC caches the non-existent owners when it processes the dirtyQueue. As discovered in #32571, there is still small inefficiency, because there are multiple goroutines processing the dirtyQueue, many of them might send a GET to the apiserver before the cache gets populated.
This PR populates the cache when GC observes an object gets deleted, which happens before the processing of the dirtyQueue, so it avoids the simultaneous GET sent by the GC workers.
cc @lavalamp
Automatic merge from submit-queue
Do not report warning event when an unknown deleter is requested
When Kubernetes does not have a plugin to delete a PV it should wait for
either external deleter or storage admin to delete the volume instead of
throwing an error.
This is the same approach as in #32077
@kubernetes/sig-storage
Previusly github.com/robfig/cron library did not allow passing cron spec without
seconds. Previous commit updates the library, which has additional
method ParseStandard which follows the standard cron spec, iow. minute,
hour, day of month, month, day of week.
Automatic merge from submit-queue
Recombine the condition for the "shouldScale" function
The PR recombine the condition for the "shouldScale" function, abstract the common condition(hpa.Status.LastScaleTime == nil).
Two problems:
1. Get is always using Existing nodes slice, and you will for sure miss any
updated data
2. Each Update duplicates node entry in UpdatedNodes slice
For the 1st, try to find a node in UpdatedNodes slice (same as for the List).
2nd - append only if there is no node with same name as updated, if there is
just replace object.
Change-Id: I9ef1cca2788ba946eee37fa1b037c124ad76074c
When Kubernetes does not have a plugin to delete a PV it should wait for
either external deleter or storage admin to delete the volume instead of
throwing an error.
Related to #32077
Automatic merge from submit-queue
Namespace Controller handles items with finalizers gracefully
This PR does the following:
1. ensures the "orphan" finalizer is not added to items during DELETE COLLECTION calls
2. does not treat presence of a finalizer as an unexpected error condition.
The 15s wait should only happen when finalizers not added by GC are used.
I am aware of any finalizer like that at this time.
Fixes https://github.com/kubernetes/kubernetes/issues/32519
Automatic merge from submit-queue
update error handling for daemoncontroller
Updates the DaemonSet controller to cleanly requeue with ratelimiting on errors, make use of the `utilruntime.HandleError` consistently, and wait for preconditions before doing work.
@ncdc @liggitt @sttts My plan is to use this one as an example of how to handle requeuing, preconditions, and processing error handling.
@foxish fyi
related to https://github.com/kubernetes/kubernetes/issues/30629
Automatic merge from submit-queue
Fix race condition in updating attached volume between master and node
This PR tries to fix issue #29324. The cause of this issue is that a race
condition happens when marking volumes as attached for node status. This
PR tries to clean up the logic of when and where to mark volumes as
attached/detached. Basically the workflow as follows,
1. When volume is attached sucessfully, the volume and node info is
added into nodesToUpdateStatusFor to mark the volume as attached to the
node.
2. When detach request comes in, it will check whether it is safe to
detach now. If the check passes, remove the volume from volumesToReportAsAttached
to indicate the volume is no longer considered as attached now.
Afterwards, reconciler tries to update node status and trigger detach
operation. If any of these operation fails, the volume is added back to
the volumesToReportAsAttached list showing that it is still attached.
These steps should make sure that kubelet get the right (might be
outdated) information about which volume is attached or not. It also
garantees that if detach operation is pending, kubelet should not
trigger any mount operations.
This PR tries to fix issue #29324. This cause of this issue is a race
condition happens when marking volumes as attached for node status. This
PR tries to clean up the logic of when and where to mark volumes as
attached/detached. Basically the workflow as follows,
1. When volume is attached sucessfully, the volume and node info is
added into nodesToUpdateStatusFor to mark the volume as attached to the
node.
2. When detach request comes in, it will check whether it is safe to
detach now. If the check passes, remove the volume from volumesToReportAsAttached
to indicate the volume is no longer considered as attached now.
Afterwards, reconciler tries to update node status and trigger detach
operation. If any of these operation fails, the volume is added back to
the volumesToReportAsAttached list showing that it is still attached.
These steps should make sure that kubelet get the right (might be
outdated) information about which volume is attached or not. It also
garantees that if detach operation is pending, kubelet should not
trigger any mount operations.
Automatic merge from submit-queue
Use PV shared informer in PV controller
Use the PV shared informer, addressing (partially) https://github.com/kubernetes/kubernetes/issues/26247 . Using the PVC shared informer is not so simple because sometimes the controller wants to `Requeue` and...
Automatic merge from submit-queue
Change the eviction metric type and fix rate-limited-timed-queue
People how know better convinced me that aggregate counter is better than a gauge for a number of evictions metric. @Q-Lee
Per discussion with @pwittrock I add a v1.4 label and a cherrypick candidate label. This is a slightly bigger change than I thought, but it fixes a bug in eviction logic, so it's also important.
cc @derekwaynecarr @smarterclayton @timothysc
This allows users to diagnose what's wrong with recycler. Recycler pods are
started automatically with a cryptic name and they are deleted immediately
when they finish.
kubectl describe pods will show:
FirstSeen LastSeen Count From SubobjectPath Type Reason Message
--------- -------- ----- ---- ------------- -------- ------ -------
59m 59m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(5421800e-347b-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
53m 53m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(3c9809e5-347c-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
46m 46m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(250dd2a2-347d-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
40m 40m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(0d84ea33-347e-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
33m 33m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(f5fb63bf-347e-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
27m 27m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(de7128fd-347f-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
1h 3m 75 {persistentvolume-controller } Normal RecyclerPod Recycler pod: Successfully assigned recycler-for-nfs to 127.0.0.1
1h 3m 76 {persistentvolume-controller } Normal RecyclerPod Recycler pod: Pod was active on the node longer than specified deadline
1h 1m 12 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Error syncing pod, skipping: timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
20m 1m 4 {persistentvolume-controller } Warning RecyclerPod (events with common reason combined)
These steps were necessary:
- added event watcher to volume.RecycleVolumeByWatchingPodUntilCompletion
- pass all these events through volume plugins to volume controller
- rework volume.RecycleVolumeByWatchingPodUntilCompletion unit tests to a table
(too much copy-paste)
- fix all unit tests along the way
Automatic merge from submit-queue
add selfsubjectaccessreview API
Exposes the REST API for self subject access reviews. This allows a user to see whether or not they can perform a particular action.
@kubernetes/sig-auth
with StorageClass.Provisioner == <unknown plugin>, we should wait for
either external provisioner or volume admin to provide a PV for a claim
instead of reporting an error.
Fixes#31723
Automatic merge from submit-queue
Move StorageClass to a storage group
We discussed the pros and cons in sig-api-machinery yesterday. Choosing a particular group name means that clients (including our internal code) require less work and re-swizzling to handle promotions between versions. Even if you choose a group you end up not liking, the amount of work remains the same as the incubator work case: you move the affected kind, resource, and storage.
This moves the `StorageClass` type to the `storage.k8s.io` group (named for consistency with authentication, authorization, rbac, and imagepolicy). There are two commits, one for manaul changes and one for generated code.
Automatic merge from submit-queue
fix log message to include ds name
The pod name is never set because newPod is created a couple lines up without a name. Instead log the name and namespace of the ds which the pod is created from.
also bump the log level because reasons loop get's hit fairly often and does not indicate a bug.
Automatic merge from submit-queue
Sleep between NodeStatus update retries
Just a thing I found when looking into other problems.
This is pretty much no-risk change fixing wrong behavior. Do you think it should go in 1.4? @pwittrock
Node controller's internalPodInformer will block main thread
if it is not started as a go routine. This patch fixed this
by runing internalPodInformer as a go routine.
Automatic merge from submit-queue
Namespace controller deletes pods last
I think this fixes https://github.com/kubernetes/kubernetes/issues/29308 or at least helps further reduce the incidence.
This PR changes the order in which namespace controller prioritizes resources for deletion. It deletes all resources before deleting pods. The rationale for this change is to broadcast deletion of controllers that spawn pods first rather than trip those controllers up into thinking they should spawn more pods which would increase the risk of causing races with the `NamespaceLifecycle` admission plug-in. Many of those controllers also are not rate-limited in the face of rejection, so rather than promote a situation where they are rejected, we promote a situation that removes those things first.
Automatic merge from submit-queue
Post event message for volume attachment
This PR is to add event message when attaching volume fails to help
users to debug. For detach failure, may address in a different PR since
it requires more data structure change.
Automatic merge from submit-queue
Revert "daemonset controller should respect taints"
Reverts kubernetes/kubernetes#31020
We will be unreverting with some modifications after v1.4.
cc @pwittrock @davidopp
This PR is to add event message when attaching volume fails to help
users to debug. For detach failure, may address in a different PR since
it requires more data structure change.
If pet was evicted by kubelet - it will stuck in this state forever.
By analogy to regular pod we need to re-create pet so that it will
be re-scheduled to another node, so in order to re-create pet
and preserve consitent naming we will delete it in petset controller
and create after that.
Change-Id: Ib98bf7f34b3f2ab1582b9de34b5f4c5f84cd5215
Automatic merge from submit-queue
add names for workqueues to gather controller latency/depth metrics
Adding names to the workqueues used by controllers allows the automatic collection of depth, rate, and latency metrics for those controllers. These are useful for diagnosing various "slow controller" cases.
@kubernetes/rh-cluster-infra
Automatic merge from submit-queue
Use updated deployment after rollback
@kubernetes/deployment
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
NONE
```
Automatic merge from submit-queue
persist services need to be retried in service controller cache.
fix issue reported by @anguslees
more detail on #25189
Automatic merge from submit-queue
[GarbageCollector] add absent owner cache
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
**What this PR does / why we need it**:
Reducing the Request sent to the API server by the garbage collector to check if an owner exists.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
#26120
**Special notes for your reviewer**:
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
```
Currently when processing an item in the dirtyQueue, the garbage collector issues GET to check if any of its owners exist. If the owner is a replication controller with 1000 pods, the garbage collector sends a GET for the RC 1000 times. This PR caches the owner's UID if it does not exist according to the API server. This cuts 1/3 of the garbage collection time of the density test in the gce-500 and gce-scale, where the QPS is the bottleneck.
1. When overlapping deployments are discovered, annotate them
2. Expose those overlapping annotations as warnings in kubectl describe
3. Only respect the earliest updated one (skip syncing all other overlapping deployments)
4. Use indexer instead of store for deployment lister
Automatic merge from submit-queue
Add Cluster field in ObjectMeta
There will be no sub-rs, but add `Cluster` field to the ObjectMeta (for all the objects)
"To distinguish the object at the federation level from it's constituents at the cluster level we will add a "Cluster" field to the metadata of all objects (where the federation itself will also have a cluster identifier). That way it is possible to list, interact with, and distinguish between the objects either at the federation level or at the individual cluster level based on the cluster identifier. "
@quinton-hoole @nikhiljindal @deepak-vij @mfanjie @huangyuqi
[]()
Automatic merge from submit-queue
Add readyReplicas to replica sets
@bgrant0607 for the api changes
@bprashanth for the controllers changes
@deads2k fyi
Automatic merge from submit-queue
Don't bind pre-bound pvc & pv if size request not satisfied
as discussed briefly here https://github.com/kubernetes/kubernetes/pull/30522 , volume size ought to be verified before binding a pv & pvc regardless of what's in the pv's claimRef. @thockin
Automatic merge from submit-queue
Followup fixes for disruption controller.
Part of #12611.
- Record an event when a pod does not have exactly 1 controller.
- Add TODO comment suggesting we simplify the two cases: integer and percentage.
Automatic merge from submit-queue
Bump heapster version
Bump heapster version to v1.2.0-beta.1.
Migrate metrics tests and HPA to use List objects introduced in the new version.
Automatic merge from submit-queue
Avoid failure message flush log when node no longer exist
When node is deleted, attach-detach controller cache may contain stale
information of this node, and update node status fails in reconciler
loop. This message easily flush the log file. This PR is just a quick
fix of this issue. More complete fix including make controller cache
up to date will be addressed in another PR.
Automatic merge from submit-queue
Node controller deletePod return true if there are pods pending deletion
Fixes https://github.com/kubernetes/kubernetes/issues/30536
If a node had a single pod in terminating state, and that node no longer reported healthy, the pod was never deleted by the node controller because it believed there were no pods remaining.
@smarterclayton @ncdc
Automatic merge from submit-queue
prevent RC hotloop on denied pods
If a pod is rejected during creation, the RC controller hot-loops. This can happen most frequently due to insufficient quota.
Automatic merge from submit-queue
Add Events for operation_executor to show status of mounts, failed/successful to show in describe events
Fixes#27590
@saad-ali @pmorie @erinboyd
After talking with @pmorie last week about the above issue, I decided to poke around and see if I could remedy. The refactoring broke my previous UXP merged PR's that correctly showed failed mount errors in the describe events. However, Not sure I implemented correctly, but it tested out and seems to be working, let me know what I missed or if this is not the correct approach.
```
Events:
FirstSeen LastSeen Count From SubobjectPath Type Reason Message
--------- -------- ----- ---- ------------- -------- ------ -------
2m 2m 1 {default-scheduler } Normal Scheduled Successfully assigned nfs-bb-pod1 to 127.0.0.1
44s 44s 1 {kubelet 127.0.0.1} Warning FailedMount Unable to mount volumes for pod "nfs-bb-pod1_default(a94f64f1-37c9-11e6-9aa5-52540073d346)": timeout expired waiting for volumes to attach/mount for pod "nfs-bb-pod1"/"default". list of unattached/unmounted volumes=[nfsvol]
44s 44s 1 {kubelet 127.0.0.1} Warning FailedSync Error syncing pod, skipping: timeout expired waiting for volumes to attach/mount for pod "nfs-bb-pod1"/"default". list of unattached/unmounted volumes=[nfsvol]
38s 38s 1 {kubelet } Warning FailedMount Unable to mount volumes for pod "a94f64f1-37c9-11e6-9aa5-52540073d346": Mount failed: exit status 32
Mounting arguments: nfs1.rhs:/opt/data99 /var/lib/kubelet/pods/a94f64f1-37c9-11e6-9aa5-52540073d346/volumes/kubernetes.io~nfs/nfsvol nfs []
Output: mount.nfs: Connection timed out
Resolution hint: Check and make sure the NFS Server exists (ensure that correct IPAddress/Hostname was given) and is available/reachable.
Also make sure firewall ports are open on both client and NFS Server (2049 v4 and 2049, 20048 and 111 for v3).
Use commands telnet <nfs server> <port> and showmount <nfs server> to help test connectivity.
```
Automatic merge from submit-queue
Add cluster health metrics to NodeController
Follow up of #28832
This adds metrics to monitor cluster/zone status.
cc @alex-mohr @fabioy @wojtek-t @Q-Lee
Automatic merge from submit-queue
Fix memory leak in gc
ref #30759
GC had a memory leak. The work queue item is never deleted.
I'm still fighting with my kubemark cluster to get statistics after this fix.
@wojtek-t @lavalamp
When node is deleted, attach-detach controller cache may contain stale
information of this node, and update node status fails in reconciler
loop. But one node update failure should not block updating other nodes.
Also the warning message easily flush the log file. This PR is just a quick
fix of this issue. More complete fix including make sure controller cache
up to date will be addressed in another PR.
Automatic merge from submit-queue
Implement dynamic provisioning (beta) of PersistentVolumes via StorageClass
Implemented according to PR #26908. There are several patches in this PR with one huge code regen inside.
* Please review the API changes (the first patch) carefully, sometimes I don't know what the code is doing...
* `PV.Spec.Class` and `PVC.Spec.Class` is not implemented, use annotation `volume.alpha.kubernetes.io/storage-class`
* See e2e test and integration test changes - Kubernetes won't provision a thing without explicit configuration of at least one `StorageClass` instance!
* Multiple provisioning volume plugins can coexist together, e.g. HostPath and AWS EBS. This is important for Gluster and RBD provisioners in #25026
* Contradicting the proposal, `claim.Selector` and `volume.alpha.kubernetes.io/storage-class` annotation are **not** mutually exclusive. They're both used for matching existing PVs. However, only `volume.alpha.kubernetes.io/storage-class` is used for provisioning, configuration of provisioning with `Selector` is left for (near) future.
* Documentation is missing. Can please someone write some while I am out?
For now, AWS volume plugin accepts classes with these parameters:
```
kind: StorageClass
metadata:
name: slow
provisionerType: kubernetes.io/aws-ebs
provisionerParameters:
type: io1
zone: us-east-1d
iopsPerGB: 10
```
* parameters are case-insensitive
* `type`: `io1`, `gp2`, `sc1`, `st1`. See AWS docs for details
* `iopsPerGB`: only for `io1` volumes. I/O operations per second per GiB. AWS volume plugin multiplies this with size of requested volume to compute IOPS of the volume and caps it at 20 000 IOPS (maximum supported by AWS, see AWS docs).
* of course, the plugin will use some defaults when a parameter is omitted in a `StorageClass` instance (`gp2` in the same zone as in 1.3).
GCE:
```
apiVersion: extensions/v1beta1
kind: StorageClass
metadata:
name: slow
provisionerType: kubernetes.io/gce-pd
provisionerParameters:
type: pd-standard
zone: us-central1-a
```
* `type`: `pd-standard` or `pd-ssd`
* `zone`: GCE zone
* of course, the plugin will use some defaults when a parameter is omitted in a `StorageClass` instance (SSD in the same zone as in 1.3 ?).
No OpenStack/Cinder yet
@kubernetes/sig-storage
Automatic merge from submit-queue
Continue on #30774: Change podNamespacer API
continue on #30774, credit to @wojtek-t, Ref #30759
I just fixed a test and converted IsActivePod to operate on *Pod.
Automatic merge from submit-queue
Expose flags for new NodeEviction logic in NodeController
Fix#28832
Last PR from the NodeController NodeEviction logic series.
cc @davidopp @lavalamp @mml
Automatic merge from submit-queue
Nodecontroller doesn't flip readiness on pods if kubeletVersion < 1.2.0
Older versions of the kubelet didn't know how to reconcile pod.Status, so the nodecontroller would mark pods NotReady on netsplit, and if the partition recovered in < 5m, the pods would never get marked Ready resulting in NotReady endpoints indefinitely (till kubelet restart/pod recreate etc).
Automatic merge from submit-queue
Fix default resource limits (node allocatable) for downward api volumes and env vars
@kubernetes/rh-cluster-infra @pmorie @derekwaynecarr
Automatic merge from submit-queue
Add NodeName to EndpointAddress object
Adding a new string type `nodeName` to api.EndpointAddress.
We could also do *ObjectReference to the api.Node object instead, which would be more precise for the future.
```
type ObjectReference struct {
Kind string `json:"kind,omitempty"`
Namespace string `json:"namespace,omitempty"`
Name string `json:"name,omitempty"`
UID types.UID `json:"uid,omitempty"`
APIVersion string `json:"apiVersion,omitempty"`
ResourceVersion string `json:"resourceVersion,omitempty"`
// Optional. If referring to a piece of an object instead of an entire object, this string
// should contain information to identify the sub-object. For example, if the object
// reference is to a container within a pod, this would take on a value like:
// "spec.containers{name}" (where "name" refers to the name of the container that triggered
// the event) or if no container name is specified "spec.containers[2]" (container with
// index 2 in this pod). This syntax is chosen only to have some well-defined way of
// referencing a part of an object.
// TODO: this design is not final and this field is subject to change in the future.
FieldPath string `json:"fieldPath,omitempty"`
}
```
Automatic merge from submit-queue
fix node controller event uid issue
Fix#29289. @smarterclayton ptal. This is not a very elegant fix, if we can use nodeName in log maybe we can set timedValue.Value to node.UID.
Automatic merge from submit-queue
Add volume reconstruct/cleanup logic in kubelet volume manager
Currently kubelet volume management works on the concept of desired
and actual world of states. The volume manager periodically compares the
two worlds and perform volume mount/unmount and/or attach/detach
operations. When kubelet restarts, the cache of those two worlds are
gone. Although desired world can be recovered through apiserver, actual
world can not be recovered which may cause some volumes cannot be cleaned
up if their information is deleted by apiserver. This change adds the
reconstruction of the actual world by reading the pod directories from
disk. The reconstructed volume information is added to both desired
world and actual world if it cannot be found in either world. The rest
logic would be as same as before, desired world populator may clean up
the volume entry if it is no longer in apiserver, and then volume
manager should invoke unmount to clean it up.
Fixes https://github.com/kubernetes/kubernetes/issues/27653
Currently kubelet volume management works on the concept of desired
and actual world of states. The volume manager periodically compares the
two worlds and perform volume mount/unmount and/or attach/detach
operations. When kubelet restarts, the cache of those two worlds are
gone. Although desired world can be recovered through apiserver, actual
world can not be recovered which may cause some volumes cannot be cleaned
up if their information is deleted by apiserver. This change adds the
reconstruction of the actual world by reading the pod directories from
disk. The reconstructed volume information is added to both desired
world and actual world if it cannot be found in either world. The rest
logic would be as same as before, desired world populator may clean up
the volume entry if it is no longer in apiserver, and then volume
manager should invoke unmount to clean it up.
Automatic merge from submit-queue
Move new etcd storage (low level storage) into cacher
In an effort for #29888, we are pushing forward this:
What?
- It changes creating etcd storage.Interface impl into creating config
- In creating cacher storage (StorageWithCacher), it passes config created above and new etcd storage inside.
Why?
- We want to expose the information of (etcd) kv client to cacher. Cacher storage uses this information to talk to remote storage.
Automatic merge from submit-queue
Endpoint controller logs errors during normal cluster behavior
The endpoint controller logs an error when its forbidden from creating new endpoints during namespace termination. This is normal cluster behavior, and therefore should not be logged. This confuses operators administrating the cluster.
Updated to log at a lower level in response to a forbidden message when performing a create operation. In case of an error on the API server side of the house, I continue to requeue the key. It should be ignored in a future syncService call once the service is deleted as part of namespace termination.
See https://bugzilla.redhat.com/show_bug.cgi?id=1347425
/cc @kubernetes/rh-cluster-infra
