The iptables and ipvs proxies have code to try to preserve certain
iptables counters when modifying chains via iptables-restore, but the
counters in question only actually exist for the built-in chains (eg
INPUT, FORWARD, PREROUTING, etc), which we never modify via
iptables-restore (and in fact, *can't* safely modify via
iptables-restore), so we are really just doing a lot of unnecessary
work to copy the constant string "[0:0]" over from iptables-save
output to iptables-restore input. So stop doing that.
Also fix a confused error message when iptables-save fails.
The ipvs proxier was figuring out LoadBalancerSourceRanges matches in
the nat table and using KUBE-MARK-DROP to mark unmatched packets to be
dropped later. But with ipvs, unlike with iptables, DNAT happens after
the packet is "delivered" to the dummy interface, so the packet will
still be unmodified when it reaches the filter table (the first time)
so there's no reason to split the work between the nat and filter
tables; we can just do it all from the filter table and call DROP
directly.
Before:
- KUBE-LOAD-BALANCER (in nat) uses kubeLoadBalancerFWSet to match LB
traffic for services using LoadBalancerSourceRanges, and sends it
to KUBE-FIREWALL.
- KUBE-FIREWALL uses kubeLoadBalancerSourceCIDRSet and
kubeLoadBalancerSourceIPSet to match allowed source/dest combos
and calls "-j RETURN".
- All remaining traffic that doesn't escape KUBE-FIREWALL is sent to
KUBE-MARK-DROP.
- Traffic sent to KUBE-MARK-DROP later gets dropped by chains in
filter created by kubelet.
After:
- All INPUT and FORWARD traffic gets routed to KUBE-PROXY-FIREWALL
(in filter). (We don't use "KUBE-FIREWALL" any more because
there's already a chain in filter by that name that belongs to
kubelet.)
- KUBE-PROXY-FIREWALL sends traffic matching kubeLoadbalancerFWSet
to KUBE-SOURCE-RANGES-FIREWALL
- KUBE-SOURCE-RANGES-FIREWALL uses kubeLoadBalancerSourceCIDRSet and
kubeLoadBalancerSourceIPSet to match allowed source/dest combos
and calls "-j RETURN".
- All remaining traffic that doesn't escape
KUBE-SOURCE-RANGES-FIREWALL is dropped (directly via "-j DROP").
- (KUBE-LOAD-BALANCER in nat is now used only to set up masquerading)
kubeLoadbalancerFWSet was the only LoadBalancer-related identifier
with a lowercase "b", so fix that.
rename TestLoadBalanceSourceRanges to TestLoadBalancerSourceRanges to
match the field name (and the iptables proxier test).
Signed-off-by: gkarthiks <github.gkarthiks@gmail.com>
refactor: svc port name variable #108806
Signed-off-by: gkarthiks <github.gkarthiks@gmail.com>
refactor: rename struct for service port information to servicePortInfo and fields for more redability
Signed-off-by: gkarthiks <github.gkarthiks@gmail.com>
fix: drop chain rule
Signed-off-by: gkarthiks <github.gkarthiks@gmail.com>
When cleaning up iptables rules and ipsets used by kube-proxy in IPVS mode
iptables chain KUBE-NODE-PORT needs to be deleted before ipset
KUBE-HEALTH-CHECK-NODE-PORT can be removed. Therefore, deletion of
iptables chain KUBE-NODE-PORT is added in this change.
Fix internal and external traffic policy to be handled separately (so
that, in particular, services with Local internal traffic policy and
Cluster external traffic policy do not behave as though they had Local
external traffic policy as well.
Additionally, traffic to an `internalTrafficPolicy: Local` service on
a node with no endpoints is now dropped rather than being rejected
(which, as in the external case, may prevent traffic from being lost
when endpoints are in flux).
Now that we don't have to always append all of the iptables args into
a single array, there's no reason to have LocalTrafficDetector take in
a set of args to prepend to its own output, and also not much point in
having it write out the "-j CHAIN" by itself either.
The iptables and ipvs proxiers both had a check that none of the
elements of svcInfo.LoadBalancerIPStrings() were "", but that was
already guaranteed by the svcInfo code. Drop the unnecessary checks
and remove a level of indentation.
* Fix regression in kube-proxy
Don't use a prepend() - that allocates. Instead, make Write() take
either strings or slices (I wish we could express that better).
* WIP: switch to intf
* WIP: less appends
* tests and ipvs
Because the proxy.Provider interface included
proxyconfig.EndpointsHandler, all the backends needed to
implement its methods. But iptables, ipvs, and winkernel implemented
them as no-ops, and metaproxier had an implementation that wouldn't
actually work (because it couldn't handle Services with no active
Endpoints).
Since Endpoints processing in kube-proxy is deprecated (and can't be
re-enabled unless you're using a backend that doesn't support
EndpointSlice), remove proxyconfig.EndpointsHandler from the
definition of proxy.Provider and drop all the useless implementations.
The iptables rule that matches kubeNodePortLocalSetSCTP must be inserted
before the one matches kubeNodePortSetSCTP, otherwise all SCTP traffic
would be masqueraded regardless of whether its ExternalTrafficPolicy is
Local or not.
To cover the case in tests, the patch adds rule order validation to
checkIptables.
1. Do not describe port type in message because lp.String() already has the
information.
2. Remove duplicate error detail from event log.
Previous log is like this.
47s Warning listen tcp4 :30764: socket: too many open files node/127.0.0.1 can't open port "nodePort for default/temp-svc:834" (:30764/tcp4), skipping it: listen tcp4 :30764: socket: too many open files
[issue]
When creating a NodePort service with the kubectl create command, the NodePort
assignment may fail.
Failure to assign a NodePort can be simulated with the following malicious
command[1].
$ kubectl create service nodeport temp-svc --tcp=`python3 <<EOF
print("1", end="")
for i in range(2, 1026):
print("," + str(i), end="")
EOF
`
The command succeeds and shows following output.
service/temp-svc created
The service has been successfully generated and can also be referenced with the
get command.
$ kubectl get svc
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S)
temp-svc NodePort 10.0.0.139 <none> 1:31335/TCP,2:32367/TCP,3:30263/TCP,(omitted),1023:31821/TCP,1024:32475/TCP,1025:30311/TCP 12s
The user does not recognize failure to assign a NodePort because
create/get/describe command does not show any error. This is the issue.
[solution]
Users can notice errors by looking at the kube-proxy logs, but it may be difficult to see the kube-proxy logs of all nodes.
E0327 08:50:10.216571 660960 proxier.go:1286] "can't open port, skipping this nodePort" err="listen tcp4 :30641: socket: too many open files" port="\"nodePort for default/temp-svc:744\" (:30641/tcp4)"
E0327 08:50:10.216611 660960 proxier.go:1286] "can't open port, skipping this nodePort" err="listen tcp4 :30827: socket: too many open files" port="\"nodePort for default/temp-svc:857\" (:30827/tcp4)"
...
E0327 08:50:10.217119 660960 proxier.go:1286] "can't open port, skipping this nodePort" err="listen tcp4 :32484: socket: too many open files" port="\"nodePort for default/temp-svc:805\" (:32484/tcp4)"
E0327 08:50:10.217293 660960 proxier.go:1612] "Failed to execute iptables-restore" err="pipe2: too many open files ()"
I0327 08:50:10.217341 660960 proxier.go:1615] "Closing local ports after iptables-restore failure"
So, this patch will fire an event when NodePort assignment fails.
In fact, when the externalIP assignment fails, it is also notified by event.
The event will be displayed like this.
$ kubectl get event
LAST SEEN TYPE REASON OBJECT MESSAGE
...
2s Warning listen tcp4 :31055: socket: too many open files node/127.0.0.1 can't open "nodePort for default/temp-svc:901" (:31055/tcp4), skipping this nodePort: listen tcp4 :31055: socket: too many open files
2s Warning listen tcp4 :31422: socket: too many open files node/127.0.0.1 can't open "nodePort for default/temp-svc:474" (:31422/tcp4), skipping this nodePort: listen tcp4 :31422: socket: too many open files
...
This PR fixes iptables and ipvs proxier.
Since userspace proxier does not seem to be affected by this issue, it is not fixed.
[1] Assume that fd limit is 1024(default).
$ ulimit -n
1024
1. Add API definitions;
2. Add feature gate and drops the field when feature gate is not on;
3. Set default values for the field;
4. Add API Validation
5. add kube-proxy iptables and ipvs implementations
6. add tests
1. For iptables mode, add KUBE-NODEPORTS chain in filter table. Add
rules to allow healthcheck node port traffic.
2. For ipvs mode, add KUBE-NODE-PORT chain in filter table. Add
KUBE-HEALTH-CHECK-NODE-PORT ipset to allow traffic to healthcheck
node port.
When running in ipvs mode, kube-proxy generated wrong iptables-restore
input because the chain names are hardcoded.
It also fixed a typo in method name.
* api: structure change
* api: defaulting, conversion, and validation
* [FIX] validation: auto remove second ip/family when service changes to SingleStack
* [FIX] api: defaulting, conversion, and validation
* api-server: clusterIPs alloc, printers, storage and strategy
* [FIX] clusterIPs default on read
* alloc: auto remove second ip/family when service changes to SingleStack
* api-server: repair loop handling for clusterIPs
* api-server: force kubernetes default service into single stack
* api-server: tie dualstack feature flag with endpoint feature flag
* controller-manager: feature flag, endpoint, and endpointSlice controllers handling multi family service
* [FIX] controller-manager: feature flag, endpoint, and endpointSlicecontrollers handling multi family service
* kube-proxy: feature-flag, utils, proxier, and meta proxier
* [FIX] kubeproxy: call both proxier at the same time
* kubenet: remove forced pod IP sorting
* kubectl: modify describe to include ClusterIPs, IPFamilies, and IPFamilyPolicy
* e2e: fix tests that depends on IPFamily field AND add dual stack tests
* e2e: fix expected error message for ClusterIP immutability
* add integration tests for dualstack
the third phase of dual stack is a very complex change in the API,
basically it introduces Dual Stack services. Main changes are:
- It pluralizes the Service IPFamily field to IPFamilies,
and removes the singular field.
- It introduces a new field IPFamilyPolicyType that can take
3 values to express the "dual-stack(mad)ness" of the cluster:
SingleStack, PreferDualStack and RequireDualStack
- It pluralizes ClusterIP to ClusterIPs.
The goal is to add coverage to the services API operations,
taking into account the 6 different modes a cluster can have:
- single stack: IP4 or IPv6 (as of today)
- dual stack: IPv4 only, IPv6 only, IPv4 - IPv6, IPv6 - IPv4
* [FIX] add integration tests for dualstack
* generated data
* generated files
Co-authored-by: Antonio Ojea <aojea@redhat.com>
