When kubelet restarts, all the information about the volumes will be
gone from actual/desired states. When update node status with mounted
volumes, the volume list might be empty although there are still volumes
are mounted and in turn causing master to detach those volumes since
they are not in the mounted volumes list. This fix is to make sure only
update mounted volumes list after reconciler starts sync states process.
This sync state process will scan the existing volume directories and
reconstruct actual states if they are missing.
This PR also fixes the problem during orphaned pods' directories. In
case of the pod directory is unmounted but has not yet deleted (e.g.,
interrupted with kubelet restarts), clean up routine will delete the
directory so that the pod directoriy could be cleaned up (it is safe to
delete directory since it is no longer mounted)
The third issue this PR fixes is that during reconstruct volume in
actual state, mounter could not be nil since it is required for creating
container.VolumeMap. If it is nil, it might cause nil pointer exception
in kubelet.
Details are in proposal PR #33203
Don't store Gluster SotrageClass parameters in annotations, it's insecure.
Instead, expect that there is the StorageClass available at the time
when it's needed by Gluster deleter.
Gluster provisioner is interested in pvc.Namespace and I don't want to add
at as a new field in VolumeOptions - it would contain almost whole PVC.
Let's pass direct reference to PVC instead and let the provisioner to pick
information it is interested in.
Automatic merge from submit-queue
Dynamic provisioning for flocker volume plugin
Refactor flocker volume plugin
* [x] Support provisioning beta (#29006)
* [x] Support deletion
* [x] Use bind mounts instead of /flocker in containers
* [x] support ownership management or SELinux relabeling.
* [x] adds volume specification via datasetUUID (this is guranted to be unique)
I based my refactor work to replicate pretty much GCE-PD behaviour
**Related issues**: #29006#26908
@jsafrane @mattbates @wallrj @wallnerryan
Automatic merge from submit-queue
Use strongly-typed types.NodeName for a node name
We had another bug where we confused the hostname with the NodeName.
Also, if we want to use different values for the Node.Name (which is
an important step for making installation easier), we need to keep
better control over this.
A tedious but mechanical commit therefore, to change all uses of the
node name to use types.NodeName
We had another bug where we confused the hostname with the NodeName.
To avoid this happening again, and to make the code more
self-documenting, we use types.NodeName (a typedef alias for string)
whenever we are referring to the Node.Name.
A tedious but mechanical commit therefore, to change all uses of the
node name to use types.NodeName
Also clean up some of the (many) places where the NodeName is referred
to as a hostname (not true on AWS), or an instanceID (not true on GCE),
etc.
Automatic merge from submit-queue
Use secrets for glusterfs provisioning passwords
- no plain password in StorageClass!
- fix the style along the way
- use PV annotations to pass the configuration from provisioners to deleters, inspired by Ceph RBD provisioning.
~~Proposing 1.4:~~
~~- GlusterFS provisioning is a new 1.4 feature~~
~~- if we release GlusterFS provisioner as it is now, we need to support it's API (i.e. plaintext passwords) until 2.0~~
~~- it can break only GlusterFS provisioning, nothing else~~
~~- it's easy to revert~~
@kubernetes/sig-storage
fixes#31871
Automatic merge from submit-queue
Do not report error when deleting an attached volume
Persistent volume controller should not send warning events to a PV and mark the PV as failed when the volume is still attached.
This happens when a user quickly deletes a pod and associated PVC - PV is slowly detaching, while the PVC is already deleted and the PV enters Failed phase.
`Deleter.Deleter` can now return `tryAgainError`, which is sent as INFO to the PV to let the user know we did not forget to delete the PV, however the PV stays in Released state. The controller tries again in the next sync (15 seconds by default).
Fixes#31511
Automatic merge from submit-queue
Send recycle events from pod to pv.
This allows users to diagnose what's wrong with recycler. Recycler pods are started automatically with a cryptic name and they are deleted immediately when they finish.
e.g, `kubectl describe pv` could show that NFS cannot be mounted (and how many pods have tried it):
```
FirstSeen LastSeen Count From SubobjectPath Type Reason Message
--------- -------- ----- ---- ------------- -------- ------ -------
59m 59m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(5421800e-347b-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
53m 53m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(3c9809e5-347c-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
46m 46m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(250dd2a2-347d-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
40m 40m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(0d84ea33-347e-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
33m 33m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(f5fb63bf-347e-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
27m 27m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(de7128fd-347f-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
1h 3m 75 {persistentvolume-controller } Normal RecyclerPod Recycler pod: Successfully assigned recycler-for-nfs to 127.0.0.1
1h 3m 76 {persistentvolume-controller } Normal RecyclerPod Recycler pod: Pod was active on the node longer than specified deadline
1h 1m 12 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Error syncing pod, skipping: timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
20m 1m 4 {persistentvolume-controller } Warning RecyclerPod (events with common reason combined)
```
These steps were necessary:
- added event watcher to volume.RecycleVolumeByWatchingPodUntilCompletion
- pass all these events through volume plugins to volume controller
- rework volume.RecycleVolumeByWatchingPodUntilCompletion unit tests to a table (too much copy-paste)
- fix all unit tests along the way
Automatic merge from submit-queue
Support Quobyte as StorageClass
This PR allows Users to use Quobyte as StorageClass for dynamic volume provisioning and implements the Provisioner/Deleter Interface.
@quolix @kubernetes/sig-storage @rootfs
Automatic merge from submit-queue
Disambiguate unsupported metrics from metrics errors
**What this PR does / why we need it**:
Stop logging "metrics are not supported for MetricsNil Volumes" as it spams the log.
**Which issue this PR fixes**
fixes#20676, fixes#27373
**Special notes for your reviewer**:
None
**Release note**:
```release-note
Don't log "metrics are not supported for MetricsNil Volumes"
```
Automatic merge from submit-queue
Change the default volume type of GlusterFS provisioner.
At present provisioner creates 'Distribute' Volume and this patch change the default
volume type 'Distribute Replica:(3)' volume.
At present, provisioner creates Distribute Volume and this patch
change the default volume type to Distribute-Replica(3) volume.
Signed-off-by: Humble Chirammal <hchiramm@redhat.com>
Automatic merge from submit-queue
Fix race condition in updating attached volume between master and node
This PR tries to fix issue #29324. The cause of this issue is that a race
condition happens when marking volumes as attached for node status. This
PR tries to clean up the logic of when and where to mark volumes as
attached/detached. Basically the workflow as follows,
1. When volume is attached sucessfully, the volume and node info is
added into nodesToUpdateStatusFor to mark the volume as attached to the
node.
2. When detach request comes in, it will check whether it is safe to
detach now. If the check passes, remove the volume from volumesToReportAsAttached
to indicate the volume is no longer considered as attached now.
Afterwards, reconciler tries to update node status and trigger detach
operation. If any of these operation fails, the volume is added back to
the volumesToReportAsAttached list showing that it is still attached.
These steps should make sure that kubelet get the right (might be
outdated) information about which volume is attached or not. It also
garantees that if detach operation is pending, kubelet should not
trigger any mount operations.
This PR tries to fix issue #29324. This cause of this issue is a race
condition happens when marking volumes as attached for node status. This
PR tries to clean up the logic of when and where to mark volumes as
attached/detached. Basically the workflow as follows,
1. When volume is attached sucessfully, the volume and node info is
added into nodesToUpdateStatusFor to mark the volume as attached to the
node.
2. When detach request comes in, it will check whether it is safe to
detach now. If the check passes, remove the volume from volumesToReportAsAttached
to indicate the volume is no longer considered as attached now.
Afterwards, reconciler tries to update node status and trigger detach
operation. If any of these operation fails, the volume is added back to
the volumesToReportAsAttached list showing that it is still attached.
These steps should make sure that kubelet get the right (might be
outdated) information about which volume is attached or not. It also
garantees that if detach operation is pending, kubelet should not
trigger any mount operations.
Automatic merge from submit-queue
support storage class in Ceph RBD volume
replace WIP PR #30959, using PV annotation idea from @jsafrane
@kubernetes/sig-storage @johscheuer @elsonrodriguez
This allows users to diagnose what's wrong with recycler. Recycler pods are
started automatically with a cryptic name and they are deleted immediately
when they finish.
kubectl describe pods will show:
FirstSeen LastSeen Count From SubobjectPath Type Reason Message
--------- -------- ----- ---- ------------- -------- ------ -------
59m 59m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(5421800e-347b-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
53m 53m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(3c9809e5-347c-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
46m 46m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(250dd2a2-347d-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
40m 40m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(0d84ea33-347e-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
33m 33m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(f5fb63bf-347e-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
27m 27m 1 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Unable to mount volumes for pod "recycler-for-nfs_default(de7128fd-347f-11e6-a79b-3c970e965218)": timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
1h 3m 75 {persistentvolume-controller } Normal RecyclerPod Recycler pod: Successfully assigned recycler-for-nfs to 127.0.0.1
1h 3m 76 {persistentvolume-controller } Normal RecyclerPod Recycler pod: Pod was active on the node longer than specified deadline
1h 1m 12 {persistentvolume-controller } Warning RecyclerPod Recycler pod: Error syncing pod, skipping: timeout expired waiting for volumes to attach/mount for pod "recycler-for-nfs"/"default". list of unattached/unmounted volumes=[vol]
20m 1m 4 {persistentvolume-controller } Warning RecyclerPod (events with common reason combined)
These steps were necessary:
- added event watcher to volume.RecycleVolumeByWatchingPodUntilCompletion
- pass all these events through volume plugins to volume controller
- rework volume.RecycleVolumeByWatchingPodUntilCompletion unit tests to a table
(too much copy-paste)
- fix all unit tests along the way
Automatic merge from submit-queue
Make @rootfs the assignee for various volumes
This, combined with the '/lgtm' capability of reviewers means you can approve
PRs. @rootfs - I assume you're OK with this?
Automatic merge from submit-queue
Post event message for volume attachment
This PR is to add event message when attaching volume fails to help
users to debug. For detach failure, may address in a different PR since
it requires more data structure change.
This PR is to add event message when attaching volume fails to help
users to debug. For detach failure, may address in a different PR since
it requires more data structure change.
Automatic merge from submit-queue
Implements Attacher Plugin Interface for vSphere
This PR does the following,
Fixes#29028 (vsphere volume should implement attacher interface): Implements Attacher Plugin Interface for vSphere.
See file:
pkg/volume/vsphere_volume/vsphere_volume.go. - Removed attach and detach calls from SetupAt and TearDownAt.
pkg/volume/vsphere_volume/attacher.go. - Implements Attacher & Detacher Plugin Interface for vSphere. (Ref :- GCE_PD & AWS attacher.go)
pkg/cloudproviders/provider/vsphere.go - Added DiskIsAttach method.
The vSphere plugin code needs clean up. (ex: The code for getting vSphere instance is repeated in file pkg/cloudprovider/providers/vsphere.go). I will fix this in next PR.
Automatic merge from submit-queue
Fix coding style
cc @pmorie
**What this PR does / why we need it**: Fixes case on a variable name, it's simple and adjust the code to the coding style.
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```NONE
```
Automatic merge from submit-queue
Add encryption to EBS dynamic provisioner
Resolves https://github.com/kubernetes/kubernetes/issues/30792
Adds encryption to the EBS cloud provider and provisioner.
Follow up to #29006 (all commits but the one in this PR will drop out).
@kubernetes/sig-storage
```release-note
```
