Automatic merge from submit-queue
Fixes and improvements to Photon Controller backend for kube-up
- Improve reliability of network address detection by using MAC
address. VMware has a MAC OUI that reliably distinguishes the VM's
NICs from the other NICs (like the CBR). This doesn't rely on the
unreliable reporting of the portgroup.
- Persist route changes. We configure routes on the master and nodes,
but previously we didn't persist them so they didn't last across
reboots. This persists them in /etc/network/interfaces
- Fix regression that didn't configure auth for kube-apiserver with
Photon Controller.
- Reliably run apt-get update: Not doing this can cause apt to fail.
- Remove unused nginx config in salt
- Improve reliability of network address detection by using MAC
address. VMware has a MAC OUI that reliably distinguishes the VM's
NICs from the other NICs (like the CBR). This doesn't rely on the
unreliable reporting of the portgroup.
- Persist route changes. We configure routes on the master and nodes,
but previously we didn't persist them so they didn't last across
reboots. This persists them in /etc/network/interfaces
- Fix regression that didn't configure auth for kube-apiserver with
Photon Controller.
- Reliably run apt-get update: Not doing this can cause apt to fail.
- Remove unused nginx config in salt
Automatic merge from submit-queue
federation: fix dns provider initialization issues
This PR is based on the integration test with Google DNS API. This is the first time of full integration test.
So multiple issues was found and I combined all of them in this single PR
1. add dns provider initialization and add ensureDns call when removing federation service.
2. add new flags federation-name and zone-name to controller manager, both are used as part of the dns record name
3. fix assertion failure at rrsets.go#L61, which will cause panic
4. change getFederationDNSZoneName to get zoneName from config instead of hard code
5. change logic of ensureDnsRrsets, only add new dns record when endpointReachable(set to true when ready address is catched) is true
6. fix bug in processEndpointUpdate, only call ensuredns when ready address is caught
7. change behavior of syncService, there is cases that endpoint is created before ingress IP assignment, so before there is defect for this case, ensureDns was not called when service being updated, so if Ingress IP is assigned after endpoint ready address is caught, the corresponding A records can not be created
8. add a checking before update federation service
@nikhiljindal , can you help to add 1.3 milestone when @quinton-hoole is on leave?
Thanks.
[]()
Added a new environment variable API_HOST_IP. API_HOST_IP allows the
user to specify an IPv6 address that is parsable by Golang. API_HOST on
the other hand allows the user to specify the IPv6 address to be used in
a URL's format as described in RFC2732.
Example:
API_HOST_IP="FEDC:BA98:7654:3210:FEDC:BA98:7654:3210"
API_HOST="[FEDC:BA98:7654:3210:FEDC:BA98:7654:3210]
or
API_HOST_IP="FEDC:BA98:7654:3210:FEDC:BA98:7654:3210"
API_HOST="[${API_HOST_IP}]"
Signed-off-by: André Martins <aanm90@gmail.com>
Automatic merge from submit-queue
fix recursive & non-recursive kubectl get of generic output format
This PR fixes the issues with `kubectl get` in https://github.com/kubernetes/kubernetes/issues/26466
Changes made:
- fix printing when using the generic output format in both non-recursive & recurvise settings to ensure that errors are being shown
- add tests to check printing generic output in a **non-recursive** setting with non-existent pods
- clean up the **recursive** `kubectl get` tests
/cc @janetkuo
Automatic merge from submit-queue
Stop checking in generated documents
Part of #26205
Auto generated docs are **NO LONGER CHECKED IN**, only placeholders.
To generate them, e.g. before exporting docs, run hack/generate-docs.sh.
hack/verify-generated-docs.sh ensures that generated docs are merely the
placeholder text.
hack/update-generated-docs.sh puts the placeholder text in the proper
places.
The old munge behavior is moved into hack/{update|verify}-munge-docs.sh.
Pull the latest build of the release the server is running, rather
than matching exact version. This allows GKE to pick up test fixes
from branch head, instead of waiting for a patch.
Automatic merge from submit-queue
Add a custom main instead of the standard test main, to reduce stack …
Adds a custom test main handler (see: `TestMain` in https://golang.org/pkg/testing/ for details)
Partial fix for https://github.com/kubernetes/kubernetes/issues/25965
This does the standard timeout, but strips non-kubernetes stacks out of the stack trace (e.g. it filters things like:
```
goroutine 466 [IO wait, 7 minutes]:
net.runtime_pollWait(0x7fd74c4672c0, 0x72, 0xc821614000)
/usr/local/go/src/runtime/netpoll.go:160 +0x60
net.(*pollDesc).Wait(0xc8215c21b0, 0x72, 0x0, 0x0)
/usr/local/go/src/net/fd_poll_runtime.go:73 +0x3a
net.(*pollDesc).WaitRead(0xc8215c21b0, 0x0, 0x0)
/usr/local/go/src/net/fd_poll_runtime.go:78 +0x36
net.(*netFD).Read(0xc8215c2150, 0xc821614000, 0x1000, 0x1000, 0x0, 0x7fd74c491050, 0xc820014058)
/usr/local/go/src/net/fd_unix.go:250 +0x23a
net.(*conn).Read(0xc820a5a090, 0xc821614000, 0x1000, 0x1000, 0x0, 0x0, 0x0)
/usr/local/go/src/net/net.go:172 +0xe4
net/http.noteEOFReader.Read(0x7fd74c465258, 0xc820a5a090, 0xc8215f0068, 0xc821614000, 0x1000, 0x1000, 0x405773, 0x0, 0x0)
/usr/local/go/src/net/http/transport.go:1687 +0x67
net/http.(*noteEOFReader).Read(0xc8215ae1a0, 0xc821614000, 0x1000, 0x1000, 0xc82159ad1d, 0x0, 0x0)
<autogenerated>:284 +0xd0
bufio.(*Reader).fill(0xc8202a2b40)
/usr/local/go/src/bufio/bufio.go:97 +0x1e9
bufio.(*Reader).Peek(0xc8202a2b40, 0x1, 0x0, 0x0, 0x0, 0x0, 0x0)
/usr/local/go/src/bufio/bufio.go:132 +0xcc
net/http.(*persistConn).readLoop(0xc8215f0000)
/usr/local/go/src/net/http/transport.go:1073 +0x177
created by net/http.(*Transport).dialConn
/usr/local/go/src/net/http/transport.go:857 +0x10a6
```
We may want to get even more aggressive in the future.
@kubernetes/sig-testing
Automatic merge from submit-queue
GCI: add support for network plugin
I had run e2e against a cluster with both master and nodes on GCI a couple of times. The PR auto tests will cover the hybrid cluster with just master on GCI.
cc/ @roberthbailey @fabioy @kubernetes/goog-image
Auto generated docs are **NO LONGER CHECKED IN**, only placeholders.
To generate them, e.g. before exporting docs, run hack/generate-docs.sh.
hack/verify-generated-docs.sh ensures that generated docs are merely the
placeholder text.
hack/update-generated-docs.sh puts the placeholder text in the proper
places.
The old munge behavior is moved into hack/{update|verify}-munge-docs.sh.
Also includes other improvements:
- Makefile rule to run tests against remote instance using existing host or image
- Makefile will reuse an instance created from an image if it was not torn down
- Runner starts gce instances in parallel with building source
- Runner uses instance ip instead of hostname so that it doesn't need to resolve
- Runner supports cleaning up files and processes on an instance without stopping / deleting it
- Runner runs tests using `ginkgo` binary to support running tests in parallel
Automatic merge from submit-queue
Enable support for memory eviction configuration via salt
Added evictions based on memory by default whenever the available memory is < 100Mi.
Updated GCE and GCI.
Automatic merge from submit-queue
Always skew the client when running version-skew tests
As mentioned in the comments:
- for upgrade jobs, we want kubectl to be at the same version as master.
- for client skew tests, we want to use the skewed kubectl (that's what we're testing).
So, remove gate on `JENKINS_USE_SKEW_KUBECTL`, and always use the skewed `kubectl`.
This should go in before https://github.com/kubernetes/test-infra/pull/109.
We want to continuously validate Docker releases (#25215), on GCI. This change
adds a new test config variable, `KUBE_GCI_DOCKER_VERSION`, through which we can
specify which version of Docker we want to run on the master and nodes. This
change also patches the Jenkins e2e-runner with the ability to fetch the latest
Docker (pre)release, and sets the aforementioned variable accordingly.
Automatic merge from submit-queue
Don't allow deps with no discernible license
This updates the few deps we had with no LICENSE file to current versions that do have that file. It also disallows new deps without obvious licenses.
Automatic merge from submit-queue
Attach/Detach Controller Kubelet Changes
This PR contains changes to enable attach/detach controller proposed in #20262.
Specifically it:
* Introduces a new `enable-controller-attach-detach` kubelet flag to enable control by attach/detach controller. Default enabled.
* Removes all references `SafeToDetach` annotation from controller.
* Adds the new `VolumesInUse` field to the Node Status API object.
* Modifies the controller to use `VolumesInUse` instead of `SafeToDetach` annotation to gate detachment.
* Modifies kubelet to set `VolumesInUse` before Mount and after Unmount.
* There is a bug in the `node-problem-detector` binary that causes `VolumesInUse` to get reset to nil every 30 seconds. Issue https://github.com/kubernetes/node-problem-detector/issues/9#issuecomment-221770924 opened to fix that.
* There is a bug here in the mount/unmount code that prevents resetting `VolumeInUse in some cases, this will be fixed by mount/unmount refactor.
* Have controller process detaches before attaches so that volumes referenced by pods that are rescheduled to a different node are detached first.
* Fix misc bugs in controller.
* Modify GCE attacher to: remove retries, remove mutex, and not fail if volume is already attached or already detached.
Fixes#14642, #19953
```release-note
Kubernetes v1.3 introduces a new Attach/Detach Controller. This controller manages attaching and detaching volumes on-behalf of nodes that have the "volumes.kubernetes.io/controller-managed-attach-detach" annotation.
A kubelet flag, "enable-controller-attach-detach" (default true), controls whether a node sets the "controller-managed-attach-detach" or not.
```
Automatic merge from submit-queue
Fixes#26526 - hack/update-api-reference-docs.sh
I opened a Pull request to fix this issue https://github.com/kubernetes/kubernetes/issues/26526
The problem is that the update script ignores white spaces but the verify script doesn't which leads to a strange behaviour -> you use the update script but the verify script tells you that the api docs are not up to date.
This PR contains Kubelet changes to enable attach/detach controller control.
* It introduces a new "enable-controller-attach-detach" kubelet flag to
enable control by controller. Default enabled.
* It removes all references "SafeToDetach" annoation from controller.
* It adds the new VolumesInUse field to the Node Status API object.
* It modifies the controller to use VolumesInUse instead of SafeToDetach
annotation to gate detachment.
* There is a bug in node-problem-detector that causes VolumesInUse to
get reset every 30 seconds. Issue https://github.com/kubernetes/node-problem-detector/issues/9
opened to fix that.
Add it as a special case package root and import the license file. This was
the only UNKNOWN license, prior to the change to not look at upstream repo
state.
This change recovers some of the side effects of
https://github.com/kubernetes/kubernetes/pull/26197, i.e., keeps the defaults of
`NODE_IMAGE` and `NODE_IMAGE_PROJECT` to `MASTER_IMAGE` and
`MASTER_IMAGE_PROJECT`, for backward compatibility. Although it keeps
`OS_DISTRIBUTION` defaulting to `gci`, the default settings of these vars are
moved to `cluster/gce/util.sh` and conditioned on `OS_DISTRIBUTION==gci`.
Automatic merge from submit-queue
Don't set the env var CC when not cross-compiling
I noticed that this script was trying to use `arm-linux-gnueabi-gcc` also when running natively on arm.
When running natively, `CC` should always be `gcc` (which also is the default)
Also added `federation-controller-manager` to the static list, I think someone forgot to do that.
@ixdy @david-mcmahon @spiffxp @spxtr
Automatic merge from submit-queue
Get install-etcd.sh to work on OSX
Check the platform before we download the etcd binary. On OSX, save
the zip file, unzip it and link the directory with the correct
name.
Fixes#26041
Automatic merge from submit-queue
Add -addr option to hack/lib/etcd.h
Added -addr to etcd hack script so it listens on the same address specified in the `host` variable.
Signed-off-by: André Martins <aanm90@gmail.com>
Automatic merge from submit-queue
Support per-test-environment ginkgo flags for node e2e tests to facilitate skipping miss behaving tests in PR builder
We had an issue today where some node e2e tests were timing out in the pr builder. We want to be able to skip tests in the pr builder and leave them running in the CI if this happens again.
[]()
Automatic merge from submit-queue
Adds --network-plugin-dir argument to hack/local-up-cluster.sh
CNI Network Plugin developers who want to use hack/local-up-cluster.sh need to specify the --network-plugin-dir option to kubelet.
Automatic merge from submit-queue
Add more global options to local-up-cluster.sh
I added a couple more global variables to the `local-up-cluster.sh` script.
The `KUBELET_HOST` environment name make sense to me. If it isn't the best name I will change it.
The `ETCD` ones make sense since they are being used under `hack/lib/etcd.sh`
Signed-off-by: André Martins <aanm90@gmail.com>
Automatic merge from submit-queue
kube-controller-manager: Add configure-cloud-routes option
This allows kube-controller-manager to allocate CIDRs to nodes (with
allocate-node-cidrs=true), but will not try to configure them on the
cloud provider, even if the cloud provider supports Routes.
The default is configure-cloud-routes=true, and it will only try to
configure routes if allocate-node-cidrs is also configured, so the
default behaviour is unchanged.
This is useful because on AWS the cloud provider configures routes by
setting up VPC routing table entries, but there is a limit of 50
entries. So setting configure-cloud-routes on AWS would allow us to
continue to allocate node CIDRs as today, but replace the VPC
route-table mechanism with something not limited to 50 nodes.
We can't just turn off the cloud-provider entirely because it also
controls other things - node discovery, load balancer creation etc.
Fix#25602
Automatic merge from submit-queue
Push public key to project if not already present
Fixes https://github.com/kubernetes/kubernetes/issues/26128
Fixes https://github.com/kubernetes/kubernetes/issues/26129
Whenever the ssh key changes (which happens right now whenever we add/change a new jenkins agent) this key will not get pushed to the project until either `gcloud compute ssh` or `gcloud compute config-ssh` runs. As a result instances on this project will reject ssh attempts with this key.
In many cases this will not happen until after a test on a project fails and we attempt to ssh to the nodes to grab logs.
This verifies the presence of the ssh key before starting tests, and attempts to add it if it is missing.
Jenkins relies on junit.xml to identify test failures
and non-0 exit codes to indentify infrastructure failures.
Test failures in kubemark tests should not cause the test
script to exit non-0. Infrastructure failures should.
- Add function to dump cluster logs without exiting (refactor)
- Change `test/kubemark/stop-kubemark.sh` to be run regardless of whether tests fail or not
- Exit code for failed tests overwritten to be the exit code of dumping the cluster logs
This code used to actually reach out to the internet to look for files. This
is flaky, slow, and semantically WRONG. The license that is upstream might
actually be different than what we have vendored. Only look at local files.
This now passes back-to-back updates and verifies.
This allows kube-controller-manager to allocate CIDRs to nodes (with
allocate-node-cidrs=true), but will not try to configure them on the
cloud provider, even if the cloud provider supports Routes.
The default is configure-cloud-routes=true, and it will only try to
configure routes if allocate-node-cidrs is also configured, so the
default behaviour is unchanged.
This is useful because on AWS the cloud provider configures routes by
setting up VPC routing table entries, but there is a limit of 50
entries. So setting configure-cloud-routes on AWS would allow us to
continue to allocate node CIDRs as today, but replace the VPC
route-table mechanism with something not limited to 50 nodes.
We can't just turn off the cloud-provider entirely because it also
controls other things - node discovery, load balancer creation etc.
Fix#25602
Automatic merge from submit-queue
Add release_1_3 clientset in update-codegen
Add release_1_3 clientset in update-codegen to keep it update-to-date; update the generated clientset.
Automatic merge from submit-queue
Attach Detach Controller Business Logic
This PR adds the meat of the attach/detach controller proposed in #20262.
The PR splits the in-memory cache into a desired and actual state of the world.
Automatic merge from submit-queue
use kubectl-with-retry on pause & resume
attempts to fix https://github.com/kubernetes/kubernetes/issues/25645 by using `kubectl-with-retry` on `rollout {pause,resume}` (`resume` is for safe measures) instead of `kubectl` directly, as is done with other `rollout {pause,resume}` tests in this same script.
Automatic merge from submit-queue
e2e-runner: Drop Trusty support in favor of GCI
Now that GCI (Google Container-VM Image) is out, we will start running e2e tests
with it instead of Ubuntu Trusty. This change updates `e2e-runner.sh` to replace
the Trusty related logic with GCI.
_Note that this change has to go in the same time as https://github.com/kubernetes/test-infra/pull/54_
@spxtr Can you review?
cc/ @andyzheng0831 @kubernetes/goog-image
Split controller cache into actual and desired state of world.
Controller will only operate on volumes scheduled to nodes that
have the "volumes.kubernetes.io/controller-managed-attach" annotation.
- Add junit test reported
- Write etcd.log, kubelet.log and kube-apiserver.log to files instead of stdout
- Scp artifacts to the jenkins WORKSPACE
Fixes#25966
Automatic merge from submit-queue
Renaming federated-apiserver to federation-apiserver
Its not a "federated" apiserver. Its an apiserver for federation.
The corresponding controller manager is also called federation-controller-manager.
If we are going to rename, it should be done in 1.3 before people write scripts referencing the binary name.
Automatic merge from submit-queue
Add a 'kubectl clusterinfo dump' option
Ref: #3500
@bgrant0607 @smarterclayton @jszczepkowski
Usage:
```
# Dump current cluster state to stdout
kubectl clusterinfo dump
# Dump current cluster state to /tmp
kubectl clusterinfo dump --output-directory=/tmp
# Dump all namespaces to stdout
kubectl clusterinfo dump --all-namespaces
# Dump a set of namespaces to /tmp
kubectl clusterinfo dump --namespaces default,kube-system --output-directory=/tmp
```
<!-- Reviewable:start -->
---
This change is [<img src="http://reviewable.k8s.io/review_button.svg" height="35" align="absmiddle" alt="Reviewable"/>](http://reviewable.k8s.io/reviews/kubernetes/kubernetes/20672)
<!-- Reviewable:end -->
Automatic merge from submit-queue
Improve the speed of do-nothing build.
As @thockin found out here https://github.com/kubernetes/kubernetes/issues/24518, vast majority of the do-nothing build time is spent in rebuilding the test binaries. There is no staleness check support for test binaries.
This commit implements the staleness checks for test binaries and uses them while building packages.
On my workstation, do-nothing hack/build-go.sh time goes from ~20 secs to ~4 secs, of which only ~1 sec is from doing test binary staleness check now (as opposed to ~17 secs it took to build the test binaries before). I did some experiments to bring this time down to <1 sec. I measured using go test -bench, but it was not very useful in this case. I believe, a vast majority of that ~1 second is being spent in fork/exec and piping the results back to the staleness check program along with the ser-deser involved, but it needs to be validated. Not a proof, but to provide some supporting evidence to this claim, running `go list -f format packages` in the shell takes about 600ms irrespective of what's in the format.
Tests are TBD. I am still trying to figure out how to test this, but I would like to get early feedback
cc @mikedanese @mml
Automatic merge from submit-queue
Cache Webhook Authentication responses
Add a simple LRU cache w/ 2 minute TTL to the webhook authenticator.
Kubectl is a little spammy, w/ >= 4 API requests per command. This also prevents a single unauthenticated user from being able to DOS the remote authenticator.
Automatic merge from submit-queue
Updaing QoS policy to be at the pod level
Quality of Service will be derived from an entire Pod Spec, instead of being derived from resource specifications of individual resources per-container.
A Pod is `Guaranteed` iff all its containers have limits == requests for all the first-class resources (cpu, memory as of now).
A Pod is `BestEffort` iff requests & limits are not specified for any resource across all containers.
A Pod is `Burstable` otherwise.
Note: Existing pods might be more susceptible to OOM Kills on the node due to this PR! To protect pods from being OOM killed on the node, set `limits` for all resources across all containers in a pod.
<!-- Reviewable:start -->
---
This change is [<img src="http://reviewable.k8s.io/review_button.svg" height="35" align="absmiddle" alt="Reviewable"/>](http://reviewable.k8s.io/reviews/kubernetes/kubernetes/14943)
<!-- Reviewable:end -->
Automatic merge from submit-queue
add CIDR allocator for NodeController
This PR:
* use pkg/controller/framework to watch nodes and reduce lists when allocate CIDR for node
* decouple the cidr allocation logic from monitoring status logic
<!-- Reviewable:start -->
---
This change is [<img src="http://reviewable.k8s.io/review_button.svg" height="35" align="absmiddle" alt="Reviewable"/>](http://reviewable.k8s.io/reviews/kubernetes/kubernetes/19242)
<!-- Reviewable:end -->
Automatic merge from submit-queue
Add 'kubectl set image'
```release-note
Add "kubectl set image" for easier updating container images (for pods or resources with pod templates).
```
**Usage:**
```
kubectl set image (-f FILENAME | TYPE NAME) CONTAINER_NAME_1=CONTAINER_IMAGE_1 ... CONTAINER_NAME_N=CONTAINER_IMAGE_N
```
**Example:**
```console
# Set a deployment's nginx container image to 'nginx:1.9.1', and its busybox container image to 'busybox'.
$ kubectl set image deployment/nginx busybox=busybox nginx=nginx:1.9.1
# Update all deployments' nginx container's image to 'nginx:1.9.1'
$ kubectl set image deployments nginx=nginx:1.9.1 --all
# Update image of all containers of daemonset abc to 'nginx:1.9.1'
$ kubectl set image daemonset abc *=nginx:1.9.1
# Print result (in yaml format) of updating nginx container image from local file, without hitting the server
$ kubectl set image -f path/to/file.yaml nginx=nginx:1.9.1 --local -o yaml
```
I abandoned the `--container=xxx --image=xxx` flags in the [deploy proposal](https://github.com/kubernetes/kubernetes/blob/master/docs/proposals/deploy.md#kubectl-set) since it's much easier to use with just KEY=VALUE (CONTAINER_NAME=CONTAINER_IMAGE) pairs.
Ref #21648
@kubernetes/kubectl @bgrant0607 @kubernetes/sig-config
[]()
Automatic merge from submit-queue
Fix JENKINS_USE_SKEW_KUBECTL
I got this logic wrong; the first is a NOT comparison, so the second should only be available if that NOT comparison returns true.
Automatic merge from submit-queue
Add a timeout to the node e2e Ginkgo test runner
Also add a few debugging statements to indicate progress.
Should help prevent #25639, since we'll timeout tests before Jenkins times out the build.
Automatic merge from submit-queue
Cassandra examples updating images to v9
- this is a version bump for the C* image
- I also increased the cpu to .5 because .1 is slow like warm death
Who can actually run the build to get the container to the examples repo?
Now that GCI (Google Container-VM Image) is out, we will start running e2e tests
with it instead of Ubuntu Trusty. This change updates `e2e-runner.sh` to replace
the Trusty related logic with GCI.
This patch adds the --exit-on-lock-contention flag, which must be used
in conjunction with the --lock-file flag. When provided, it causes the
kubelet to wait for inotify events for that lock file. When an 'open'
event is received, the kubelet will exit.
Automatic merge from submit-queue
Implement the cluster-controller of kubernetes federation
This PR is the cluster-controller of kubernetes federation.
This controller of federation phase 1 just collect the status of federated clusters.
Automatic merge from submit-queue
Remove call to setup_env from hack/e2e-node-test.sh
[]()
This messes with the GOPATH in a way that confuses ginkgo,
and doesn't appear to be necessary to run the tests
Removes likely unnecessary use of sudo, though it should be noted that
e2e_node_suite_test.go uses sudo to do something with locksmithd, so you
currently end up using it anyway.
Updates the error for not having ginkgo built to recommend the new vendor/
path for ginkgo, and to recommend using make instead of hack/build-go.sh
Should resolve#25682
This messes with the GOPATH in a way that confuses ginkgo,
and doesn't appear to be necessary to run the tests
Removes likely unnecessary use of sudo, though it should be noted that
e2e_node_suite_test.go uses sudo to do something with locksmithd, so you
currently end up using it anyway.
Updates the error for not having ginkgo built to recommend the new vendor/
path for ginkgo, and to recommend using make instead of hack/build-go.sh
Should resolve#25682
Automatic merge from submit-queue
Build hyperkube in hack/local-up-cluster instead of separate binaries
This speeds up the build time a lot.
Also add arm64 as a valid arch
This is quite trivial. Let's get it in asap
@thockin @pmorie @liggitt @eparis @zmerlynn @smarterclayton
Automatic merge from submit-queue
Use --format='value(name)' with gcloud instead of grep/awk/cut
Fixing our fragile parsing of `gcloud` is getting old (#24746, #25159, maybe others?).
Instead, let's just get the proper output out of `gcloud` in the first place.
Automatic merge from submit-queue
Support struct,array,slice types when sorting kubectl output
Fixes https://github.com/kubernetes/kubernetes/issues/24328.
Briefly, `sorting_printer` only take cares of the following type kinds:
* `reflect.Int, reflect.Int8, reflect.Int16, reflect.Int32, reflect.Int64`
* `reflect.Uint, reflect.Uint8, reflect.Uint16, reflect.Uint32, reflect.Uint64`
* `reflect.Float32, reflect.Float64`
* `reflect.String`
* `reflect.Ptr`
This commit aims to add `reflect.Struct, reflect.Slice, reflect.Array`.
/cc @bgrant0607
Automatic merge from submit-queue
Adding Services to federation clientset
Commits:
1. Regenerate the client without any changes to client-gen
2. Update clientgen to add a parameter to specify generating client only for Services v1 object.
3. Regenerate federation_internalclientset
4. Regenerate federation_release_1_3
Second commit is the most important one. Other 3 commits are auto generated by running client-gen.
I have added a command line argument to client-gen that takes in a list of group/version/resource. If a group version is part of this list, then only the resources in this list are included in the client. For other group versions, the existing check of genclient=true in types.go is used.
Other alternatives considered were:
* Update genclient in types.go to mention the clientset name in which it should be included instead of just saying genclient=true (so Services will say genclient=core,federation while all other v1 resources will say genclient=core). This requires a code change in types.go to change a client set.
* Create another types.go which will only include Services and use that to generate federation clientset. This will lead to duplicate Service definition.
cc @caesarxuchao @lavalamp @jianhuiz @mfanjie @kubernetes/sig-cluster-federation
<!-- Reviewable:start -->
---
This change is [<img src="http://reviewable.k8s.io/review_button.svg" height="35" align="absmiddle" alt="Reviewable"/>](http://reviewable.k8s.io/reviews/kubernetes/kubernetes/25443)
<!-- Reviewable:end -->
As thockin found out here https://github.com/kubernetes/kubernetes/issues/24518,
vast majority of the do-nothing build time is spent in rebuilding the test
binaries. There is no staleness check support for test binaries.
This commit implements the staleness checks for test binaries and uses them
while building packages.
Tests are TBD. I am still trying to figure out how to test this.
Automatic merge from submit-queue
The remaining API changes for PodDisruptionBudget.
It's mostly the boilerplate required for the registry, some extra codegen, and a few tests.
Will squash once we're sure it's good.
Automatic merge from submit-queue
Add eviction-pressure-transitition-period flag to kubelet
This PR does the following:
* add the new flag to control how often a node will go out of memory pressure or disk pressure conditions see: https://github.com/kubernetes/kubernetes/pull/25282
* pass an `eviction.Config` into `kubelet` so we can group config
/cc @vishh
Automatic merge from submit-queue
[e2e] kubectl stdin
Problem: Currently kubectl heavily relies on files which have to be (for lack of a better word :):):)) "written" to the file system. This hinders adoption of something like gobindata, by forcing an intermediary generated-assets directory type thing.
Solution: Lets migrate `kubectl.go` testing over to using standard input streams.
cc @kubernetes/sig-testing @timothysc
Since its hard for an individual to remember that we need codecgen and
ginkgo in godeps but don't actually have that dependancy listed in a way
that godep can automatically find.
Automatic merge from submit-queue
WIP v0 NVIDIA GPU support
```release-note
* Alpha support for scheduling pods on machines with NVIDIA GPUs whose kubelets use the `--experimental-nvidia-gpus` flag, using the alpha.kubernetes.io/nvidia-gpu resource
```
Implements part of #24071 for #23587
I am not familiar with the scheduler enough to know what to do with the scores. Mostly punting for now.
Missing items from the implementation plan: limitranger, rkt support, kubectl
support and docs
cc @erictune @davidopp @dchen1107 @vishh @Hui-Zhi @gopinatht
Automatic merge from submit-queue
pkg/apis/rbac: Add Openshift authorization API types
This PR updates #23396 by adding the Openshift RBAC types to a new API group.
Changes from Openshift:
* Omission of [ResourceGroups](4589987883/pkg/authorization/api/types.go (L32-L104)) as most of these were Openshift specific. Would like to add the concept back in for a later release of the API.
* Omission of IsPersonalSubjectAccessReview as its implementation relied on Openshift capability.
* Omission of SubjectAccessReview and ResourceAccessReview types. These are defined in `authorization.k8s.io`
~~API group is named `rbac.authorization.openshift.com` as we omitted the AccessReview stuff and that seemed to be the lest controversial based on conversations in #23396. Would be happy to change it if there's a dislike for the name.~~ Edit: API groups is named `rbac`, sorry misread the original thread.
As discussed in #18762, creating a new API group is kind difficult right now and the documentation is very out of date. Got a little help from @soltysh but I'm sure I'm missing some things. Also still need to add validation and a RESTStorage registry interface. Hence "WIP".
Any initial comments welcome.
cc @erictune @deads2k @sym3tri @philips
Automatic merge from submit-queue
Updating hack/update-codegen to keep federation_clientset updated
Right now, there is no check for this and hence federation_clientset becomes stale over time.
Updating hack/update-codegen to keep federation_clientset updated.
hack/verify-codegen.sh ensures that it is updated.
cc @caesarxuchao @lavalamp @jianhuiz @kubernetes/sig-cluster-federation
Automatic merge from submit-queue
Webhook Token Authenticator
Add a webhook token authenticator plugin to allow a remote service to make authentication decisions.
Implements part of #24071
I am not familiar with the scheduler enough to know what to do with the scores. Punting for now.
Missing items from the implementation plan: limitranger, rkt support, kubectl
support and user docs
Automatic merge from submit-queue
Hack update all remove dollar symbol
When not running ./hack/update in silent mode, the script fails due to undefined ``$Updating`` variable.
Automatic merge from submit-queue
Move godeps to vendor/
This is a first-step towards glide support, maybe we don't want or need to take this, but it was easy to try.
This fails to compile, not sure why:
```
# k8s.io/kubernetes/pkg/apis/extensions/v1beta1
_output/local/go/src/k8s.io/kubernetes/pkg/apis/extensions/v1beta1/conversion_generated.go:2703: undefined: extensions.ClusterAutoscaler
_output/local/go/src/k8s.io/kubernetes/pkg/apis/extensions/v1beta1/conversion_generated.go:2703: undefined: ClusterAutoscaler
_output/local/go/src/k8s.io/kubernetes/pkg/apis/extensions/v1beta1/conversion_generated.go:2719: undefined: extensions.ClusterAutoscaler
_output/local/go/src/k8s.io/kubernetes/pkg/apis/extensions/v1beta1/conversion_generated.go:2719: undefined: ClusterAutoscaler
_output/local/go/src/k8s.io/kubernetes/pkg/apis/extensions/v1beta1/conversion_generated.go:2723: undefined: extensions.ClusterAutoscalerList
_output/local/go/src/k8s.io/kubernetes/pkg/apis/extensions/v1beta1/conversion_generated.go:2723: undefined: ClusterAutoscalerList
_output/local/go/src/k8s.io/kubernetes/pkg/apis/extensions/v1beta1/conversion_generated.go:3468: Convert_extensions_JobSpec_To_v1beta1_JobSpec redeclared in this block
previous declaration at _output/local/go/src/k8s.io/kubernetes/pkg/apis/extensions/v1beta1/conversion.go:328
_output/local/go/src/k8s.io/kubernetes/pkg/apis/extensions/v1beta1/conversion_generated.go:3845: Convert_extensions_ScaleStatus_To_v1beta1_ScaleStatus redeclared in this block
previous declaration at _output/local/go/src/k8s.io/kubernetes/pkg/apis/extensions/v1beta1/conversion.go:98
_output/local/go/src/k8s.io/kubernetes/pkg/apis/extensions/v1beta1/conversion_generated.go:4737: Convert_v1beta1_JobSpec_To_extensions_JobSpec redeclared in this block
previous declaration at _output/local/go/src/k8s.io/kubernetes/pkg/apis/extensions/v1beta1/conversion.go:380
_output/local/go/src/k8s.io/kubernetes/pkg/apis/extensions/v1beta1/conversion_generated.go:5186: Convert_v1beta1_ScaleStatus_To_extensions_ScaleStatus redeclared in this block
previous declaration at _output/local/go/src/k8s.io/kubernetes/pkg/apis/extensions/v1beta1/conversion.go:120
_output/local/go/src/k8s.io/kubernetes/pkg/apis/extensions/v1beta1/conversion_generated.go:2723: too many errors
!!! Error in /home/thockin/tmp/godep-vendor/src/k8s.io/kubernetes/hack/lib/golang.sh:417
```
Automatic merge from submit-queue
cluster/images/hyperkube: create symlink for each server
Add a kubelet symlink so that the hyperkube image can appear as a kubelet image. https://github.com/kubernetes/kubernetes/issues/24510
a) it doesn't need it
b) changing CWD to a path with symlinks breaks deep within ginkgo, where it
crafts a relative path to ../../../../../../platforms/amd64/whatever which then
traverses the physical path not the symlinked one, and breaks.
Our `realpath` and `readlink -f` functions (required only because of MacOS,
thanks Steve) were poor substitutes at best. Mostly they were downright
broken. This thoroughly overhauls them and adds a test (in comments, since we
don't seem to have shell tests). For all the interesting cases I could think
of, the fakes act just like the real thing.
Then use those and canonicalize KUBE_ROOT. In order to make recursive calls of
our shell tool not additively grow `pwd` we have to essentially make the
sourcing of init.sh idempotent.
Automatic merge from submit-queue
Introduce events flag for describers
Printing events for a given object is not always needed. Thus, introducing --show-events=false to ``kubectl describe`` to skip events printing.
Fixes: #24239
Automatic merge from submit-queue
Reimplement 'pause' in C - smaller footprint all around
Statically links against musl. Size of amd64 binary is 3560 bytes.
I couldn't test the arm binary since I have no hardware to test it on, though I assume we want it to work on a raspberry pi.
This PR also adds the gcc5/musl cross compiling image used to build the binaries.
@thockin
Automatic merge from submit-queue
Add subPath to mount a child dir or file of a volumeMount
Allow users to specify a subPath in Container.volumeMounts so they can use a single volume for many mounts instead of creating many volumes. For instance, a user can now use a single PersistentVolume to store the Mysql database and the document root of an Apache server of a LAMP stack pod by mapping them to different subPaths in this single volume.
Also solves https://github.com/kubernetes/kubernetes/issues/20466.
Automatic merge from submit-queue
Update e2e-runner.sh so it can fetch multiple types of Trusty images
Trusty beta images now work with k8s 1.2.
@spxtr, @andyzheng0831 Can you review this?
Automatic merge from submit-queue
Kubelet: Cleanup with new engine api
Finish step 2 of #23563
This PR:
1) Cleanup go-dockerclient reference in the code.
2) Bump up the engine-api version.
3) Cleanup the code with new engine-api.
Fixes#24076.
Fixes#23809.
/cc @yujuhong
Introduce DescriberSettings for Describer display options
Introduce --show-events flag and DescriberSettings in Describer methods
Introduce unit-tests
Regenerated kubectl describe docs
Add events flag tests to test-cmd.sh
Signed-off-by: dhodovsk@redhat.com
Signed-off-by: jchaloup@redhat.com
Automatic merge from submit-queue
Jenkins: Clean up even if we can't bring cluster up
We're gathering all the cluster logs, go ahead and clean up the
resources.
Automatic merge from submit-queue
Allow etcd to store protobuf objects
Split storage serialization from client negotiation, and allow API server to take flag controlling serialization.
TODO:
* [x] API server still doesn't start - range allocation object doesn't seem to round trip correctly to etcd
* [ ] Verify that third party resources are ignoring protobuf (add a test)
* [ ] Add integration tests that verify storage is correctly protobuf
* [ ] Add a global default for which storage format to prefer?
Automatic merge from submit-queue
Map secret files into dockerized e2e
Rather than copying the GCE and AWS private keys/credentials to each Jenkins VM, we can put them in credentials and map them through.
This is one half of the change; if the relevant environment variables are set, we'll mount the files in.
cc @fejta @rmmh @apelisse
The codec factory should support two distinct interfaces - negotiating
for a serializer with a client, vs reading or writing data to a storage
form (etcd, disk, etc). Make the EncodeForVersion and DecodeToVersion
methods only take Encoder and Decoder, and slight refactoring elsewhere.
In the storage factory, use a content type to control what serializer to
pick, and use the universal deserializer. This ensures that storage can
read JSON (which might be from older objects) while only writing
protobuf. Add exceptions for those resources that may not be able to
write to protobuf (specifically third party resources, but potentially
others in the future).
Automatic merge from submit-queue
kubectl rolling-update support for same image
Fixes#23497.
Enables `kubectl rolling-update --image` to the same image, adding a `--image-pull-policy` flag to remove ambiguity. This allows rolling-update to behave as an "update and/or restart" (https://github.com/kubernetes/kubernetes/issues/23497#issuecomment-212349730), or as a forced update when the same tag can mean multiple versions (e.g. `:latest`). cc @janetkuo @nikhiljindal
Automatic merge from submit-queue
Add several arguments to boilerplate.py
This commit makes the root directory and boilerplate content directory configurable.
The defaults have remained the same, so no behavior changes should be expected.
cc @eparis
ref https://github.com/kubernetes/minikube/pull/37
Automatic merge from submit-queue
Use HOSTNAME in Docker build image tag hash
Fixes#24661 by including `$HOSTNAME` when generating the build image tag hash.
When running the verification checks under Docker, the `$KUBE_ROOT` will be identical across builds, so tags will collide unless we add additional uniqueness. By default, the hostname inside a Docker container is its ID, which should be unique enough for us.
I also deleted a misleading error message from the same check.
@kubernetes/sig-testing
This commit makes the root directory, boilerplate content directory and
the directories to skip configurable.
The defaults have remained the same, so no behavior changes should be expected.
Automatic merge from submit-queue
Run Kubemark builds inside Docker
Since Docker-in-Docker is tricky to get right (esp. wrt volume mounts), I'm only enabling it when necessary for a build (e.g. for kubemark).
cc @spxtr @fejta @wojtek-t
Automatic merge from submit-queue
allow kubectl subcmds to process multiple resources
~~autoscale, expose & patch~~ Many kubectl subcommands were limited to processing one resource at a time.
This PR allows those subcommands to process multiple resources.
This PR is in reference to https://github.com/kubernetes/kubernetes/pull/23116#issuecomment-202360784 by @deads2k
Automatic merge from submit-queue
Up to go 1.6.2 for build and test.
~~1.6.1 contains some security fixes. 1.6.2 should be out soon.~~ 1.6.2 is out :D
Images aren't pushed yet.
Automatic merge from submit-queue
Framework support for node e2e.
This should let us port existing e2e tests to the node e2e suite, if the tests are node specific.
Automatic merge from submit-queue
Provide flags to use etcd3 backed storage
ref: #24405
What's in this PR?
- Add a new flag "storage-backend" to choose "etcd2" or "etcd3". By default (i.e. empty), it's "etcd2".
- Take out etcd config code into a standalone package and let it create etcd2 or etcd3 storage backend given user input.
Automatic merge from submit-queue
Add kubelet flags for eviction threshold configuration
This PR just adds the flags for kubelet eviction and the associated generated code.
I am happy to tweak text, but we can also do that later at this point in the release.
Since this causes codegen, I wanted to stage this first.
/cc @vishh @kubernetes/sig-node
Automatic merge from submit-queue
Initial kube-up support for VMware's Photon Controller
This is for: https://github.com/kubernetes/kubernetes/issues/24121
Photon Controller is an open-source cloud management platform. More
information is available at:
http://vmware.github.io/photon-controller/
This commit provides initial support for Photon Controller. The
following features are tested and working:
- kube-up and kube-down
- Basic pod and service management
- Networking within the Kubernetes cluster
- UI and DNS addons
It has been tested with a Kubernetes cluster of up to 10
nodes. Further work on scaling is planned for the near future.
Internally we have implemented continuous integration testing and will
run it multiple times per day against the Kubernetes master branch
once this is integrated so we can quickly react to problems.
A few things have not yet been implemented, but are planned:
- Support for kube-push
- Support for test-build-release, test-setup, test-teardown
Assuming this is accepted for inclusion, we will write documentation
for the kubernetes.io site.
We have included a script to help users configure Photon Controller
for use with Kubernetes. While not required, it will help some
users get started more quickly. It will be documented.
We are aware of the kube-deploy efforts and will track them and
support them as appropriate.
Automatic merge from submit-queue
Federation apiobject cluster
add federation api group
add cluster api object and registry
~~generate cluster client~~ moved to #24117
update scripts to generate files for /federation
#19313#23653#23554
@nikhiljindal @quinton-hoole, @deepak-vij, @XiaoningDing, @alfred-huangjian @mfanjie @huangyuqi @colhom
Automatic merge from submit-queue
update codegen before update codecgen
Currently if I remove an API field, update-codecgen will complain generated deepcopy functions referring to invalid fields. Running update-codegen before update-codecgen solves the problem.
Automatic merge from submit-queue
kubectl: Allow []byte config fields to be set by the cli
Allows []byte config fields such as 'certificate-authority-data' to be set using `kubectl config set` commands.
Automatic merge from submit-queue
Script to cache metadata requests on the jenkins master
Fixes https://github.com/kubernetes/kubernetes/issues/23545
Create an http server which caches most requests to the metadata server. Use special logic to cache access tokens such that the expires_on json field is correct. Add a script to simplify enabling/disabling the cache by editing `/etc/hosts`
This is for: https://github.com/kubernetes/kubernetes/issues/24121
Photon Controller is an open-source cloud management platform. More
information is available at:
http://vmware.github.io/photon-controller/
This commit provides initial support for Photon Controller. The
following features are tested and working:
- kube-up and kube-down
- Basic pod and service management
- Networking within the Kubernetes cluster
- UI and DNS addons
It has been tested with a Kubernetes cluster of up to 10
nodes. Further work on scaling is planned for the near future.
Internally we have implemented continuous integration testing and will
run it multiple times per day against the Kubernetes master branch
once this is integrated so we can quickly react to problems.
A few things have not yet been implemented, but are planned:
- Support for kube-push
- Support for test-build-release, test-setup, test-teardown
Assuming this is accepted for inclusion, we will write documentation
for the kubernetes.io site.
We have included a script to help users configure Photon Controller
for use with Kubernetes. While not required, it will help some
users get started more quickly. It will be documented.
We are aware of the kube-deploy efforts and will track them and
support them as appropriate.
Automatic merge from submit-queue
Removing KUBE_API_VERSIONS from our test scripts
We dont need to specify them.
Its an unnecessary extra change that people have to make while adding a group.
We also need this change for ubernetes.
cc @caesarxuchao @jianhuiz
Automatic merge from submit-queue
fix relative working dirctory of KUBE_ROOT
fix relative working dirctory of `KUBE_ROOT`, do not need to change to `KUBE_ROOT` in the first place
Signed-off-by: Crazykev <zcq8989@gmail.com>
Automatic merge from submit-queue
jenkins: Allow configuration of release bucket
This allows others to leverage the existing E2E code to test some
patched kube binary by simply overriding the bucket and reusing many of
the existing scripts
Automatic merge from submit-queue
disable linkcheck jenkins job
I don't have time to fix linkcheck any soon, so temporarily disable the job.
ref #23162
Automatic merge from submit-queue
First pass at a GKE large cluster Jenkins job
Runs a 1000 node GKE parallel e2e test. On demand only. We'll add more
tests as I see what actually works - this is going to have some
flakiness on its own.
Automatic merge from submit-queue
update hack/build-go to build federation/cmd/federated-apiserver as well
federation/cmd/federated-apiserver was added in https://github.com/kubernetes/kubernetes/pull/23509
cc @jianhuiz
Runs a 1000 node GKE parallel e2e test. On demand only. We'll add more
tests as I see what actually works - this is going to have some
flakiness on its own.
Automatic merge from submit-queue
Disable heapster job which has been broken for a month
https://github.com/kubernetes/kubernetes/issues/23538
This job is no longer producing a useful signal. http://kubekins.dls.corp.google.com/ shows that the last pass was nearly two months ago. I would like to disable the job until someone has the chance to fix it so we are not wasting jenkins resources, contributing to system instability.
Automatic merge from submit-queue
Disable flannel job until it works
https://github.com/kubernetes/kubernetes/issues/24520
See bug, this job is fails every time and has done so for two months. Until someone has time to investigate and fix disable the job on jenkins so we're not wasting resources and reducing system stability.
Automatic merge from submit-queue
Enable protobuf compilation by default
Enables protobuf compilation, build verification checks, and generates all initial code.
kubectl is now 47M on OSX, build time from clean on a 2014 MBP (4 core) on Go 1.6 is ~150s.
@wojtek-t
Automatic merge from submit-queue
hack: change update-swagger-spec.sh apiserver defaults
Removing the explicit list of KUBE_API_VERSIONS will cause the apiserver
to enable all APIs by default. This change reduces the amount of script
hacking needed to add new API groups in the future.
Automatic merge from submit-queue
Incremental improvements to kubelet e2e tests
- Add keep-alive to ssh connection
- Don't try to stop services on image-based runs
- Increase jenkins ci timeout to 90 minutes to accomadate unpredictable go build times
- Remove spammy log statement
Automatic merge from submit-queue
Add some more info to the Jenkins README.
This is a bit of a work-in-progress, and I'd appreciate feedback on what to add or remove. I'm not sure that I need to say so much about the GCS format, and I should probably say some more about JJB.
@kubernetes/sig-testing
Automatic merge from submit-queue
Removing call to update-swagger-spec.sh from update-generated-swagger-docs.sh
Fixes https://github.com/kubernetes/kubernetes/issues/24233
Right now `update-generated-swagger-docs.sh` calls `update-swagger-spec.sh`, but `verify-generated-swagger-docs.sh` does not verify swagger spec (that is done by `verify-swagger-spec.sh`).
Hence, `verify-swagger-spec` breaks if it is called after `verify-generated-swagger-docs`.
Fixing it by removing the call to `update-swagger-spec.sh` from `update-generated-swagger-docs.sh`.
This will require users to run both `update-swagger-spec` and `update-generated-swagger-docs` when they update api types, but they already need to run many more scripts (`update-api-reference-docs`, `update-codegen`).
People should mostly be running hack/update-all.sh directly :)
Automatic merge from submit-queue
Shorten cluster names in GKE Jenkins on Trusty
We identified an issue that the PD tests in GKE Jenkins on Trusty fail because the PD name is longer than the limit of 63 characters. The PD name embeds the "E2E_NAME" env variable exported in the Jenkins job configuration. This PR shortens that string for all GKE Jenkins on Trusty. As a result, the PD name will meet the limit requirement.
Automatic merge from submit-queue
Bump kubernetes-test-go timeout.
It looks like the run times got more inconsistent because of load on the VM. Adding another Jenkins slave improved things so we're not constantly timing out, but it still gets a little close to timing out at times.
Average runtime is ~45 mins so I went with a 100 min timeout.
Fixes#24285
Automatic merge from submit-queue
Remove soak and disruptive 1.1 Jenkins jobs.
They're both in the kubernetes-jenkins project, not their own. The disruptive one isn't a critical build, and I don't think the soak should be critical at all, since it's never green for a week anyway and I don't think we ever plan for it to be.
Automatic merge from submit-queue
Bump upgrade test timout to 10 hours
@spxtr is it reasonable to expect that running the v1.2 tests in serial would take longer than ~ 5 hours (assuming the upgrade beforehand takes < 1 hour)?
Automatic merge from submit-queue
Run test-go less often on release branches.
I made 1.2 run every 3 hours and 1.1 run every 6 hours. They'll still run right away once a build completes.
I'm going to have to lower the number of executors on the Jenkins slaves that run test-go jobs, since running 3 at a time makes them use up all the CPU and flake.
Automatic merge from submit-queue
Replace tab with eight spaces
This file only uses spaces for indentation, and my text editor highlighted the one tab.
- Add keep-alive to ssh connection
- Don't try to stop services on image-based runs
- Increase jenkins ci timeout to 90 minutes to accomadate unpredictable go build times
- Remove spammy log statement
Automatic merge from submit-queue
Make etcd cache size configurable
Instead of the prior 50K limit, allow users to specify a more sensible size for their cluster.
I'm not sure what a sensible default is here. I'm still experimenting on my own clusters. 50 gives me a 270MB max footprint. 50K caused my apiserver to run out of memory as it exceeded >2GB. I believe that number is far too large for most people's use cases.
There are some other fundamental issues that I'm not addressing here:
- Old etcd items are cached and potentially never removed (it stores using modifiedIndex, and doesn't remove the old object when it gets updated)
- Cache isn't LRU, so there's no guarantee the cache remains hot. This makes its performance difficult to predict. More of an issue with a smaller cache size.
- 1.2 etcd entries seem to have a larger memory footprint (I never had an issue in 1.1, even though this cache existed there). I suspect that's due to image lists on the node status.
This is provided as a fix for #23323
Automatic merge from submit-queue
hack: specify --advertise-address in hack/local-up-cluster.sh
This fixes the bug where the script fails to launch an apiserver on a
machine without active networking (issue #24272).
Automatic merge from submit-queue
Fix spacing in usage_from_stdin and info_from_stdin (issue #24186).
If "a" is a bash array, then the syntax to append the contents of $line as a
new element to the array is a+=("$line"), not messages+=$line
Using the former syntax just seems to append to the first element, creating a
long string and thus losing newline information.
Fixing this allows us to drop some empty lines from invocations of
usage_from_stdin.
Automatic merge from submit-queue
Rename "gcloud-update" jobs to "daily-maintenace" and add Docker cleanup
I'm guessing Jenkins Job Builder won't delete the old job, and we'll need to do that manually?
@spxtr @fejta
Automatic merge from submit-queue
phase 2 of cassandra example overhaul
Here's the next iteration in overhauling this example, towards https://github.com/kubernetes/kubernetes/issues/20961. This removes the pod adoption part, but doesn't (yet) otherwise change any of the resources used.
It also includes some README cleanup, and removes some explicit specification of labels in the rc yaml.
This PR doesn't yet add any commentary on how we're using the seed provider (re: https://github.com/kubernetes/kubernetes/issues/20961#issuecomment-190405959 etc.). Maybe we should add that.
Also: LMK if this PR should include any changes to the links out to the docs.
cc @bgrant0607 @johndmulhausen
Automatic merge from submit-queue
Set metadata.google.internal IP in dockerized e2e based on /etc/hosts
Support the metadata cacher from #24131 inside dockerized e2e runs.
cc @fejta
Automatic merge from submit-queue
Restart job 5m after the previous failure.
If a job flakes at the beginning of it scripts, it will likely sit around doing nothing for 30m blocking the merge queue. Decreasing this to 5m.
This allows others to leverage the existing E2E code to test some
patched kube binary by simply overriding the bucket and reusing many of
the existing scripts
Removing the explicit list of KUBE_API_VERSIONS will cause the apiserver
to enable all APIs by default. This change reduces the amount of script
hacking needed to add new API groups in the future.
If "a" is a bash array, then the syntax to append the contents of $line as a
new element to the array is a+=("$line"), not messages+=$line
Using the former syntax just seems to append to the first element, creating a
long string and thus losing newline information.
Fixing this allows us to drop some empty lines from invocations of
usage_from_stdin.
This makes it easier to determine which tests cause particular suites to
fail.
All static HTML pages are now generated by one invocation of gen_html.py.
- make index include good/flake/fail numbers for each link
- consistently use % for string interpolation
Automatic merge from submit-queue
Update hack/test-cmd.sh to use tagged, gcr.io images
Migrate hack/test-cmd.sh and related test data to use tagged, gcr.io versions of the images for #13288 and #20836
Automatic merge from submit-queue
add jenkins project for kubenet
added a jenkins project for gce using kubenet as network provider
`k8s-jkns-e2e-gce-kubenet` has been created and configured
Automatic merge from submit-queue
Migrate gke-trusty test jobs to 1.2
Following up #23100 and #23139, #23319, migrate all gke-trusty jobs to the
`release-1.2` branch, add parallel and subnet test jobs, and bump timeouts
accordingly.
Tested with `jenkins-jobs test`. Manually diff'ed gke-trusty jobs against their equivalent gke jobs. For example,
```
# diff /tmp/jobs0324/kubernetes-e2e-gke-test /tmp/jobs0324/kubernetes-e2e-gke-trusty-test
4c4
< <description>Run E2E tests on GKE test endpoint. Test owner: GKE on-call.<!-- Managed by Jenkins Job Builder --></description>
---
> <description>Run E2E tests on GKE test endpoint. Test owner: wonderfly@google.com.<!-- Managed by Jenkins Job Builder --></description>
49c49
< export PROJECT="k8s-jkns-e2e-gke-test"
---
> export PROJECT="kubekins-e2e-gke-trusty-test"
51a52
> export E2E_NAME="jkns-gke-e2e-test-trusty"
228c229
< <recipientList>$DEFAULT_RECIPIENTS</recipientList>
---
> <recipientList>wonderfly@google.com,qzheng@google.com</recipientList>
```
@spxtr @roberthbailey @ihmccreery Can you review this?
cc/ @andyzheng0831
Automatic merge from submit-queue
Add support for 3rd party objects to kubectl
@deads2k @jlowdermilk
Instructions for playing around with this:
Run an apiserver with third party resources turned on (`--runtime-config=extensions/v1beta1=true,extensions/v1beta1/thirdpartyresources=true`)
Then you should be able to:
```
kubectl create -f rsrc.json
```
```json
{
"metadata": {
"name": "foo.company.com"
},
"apiVersion": "extensions/v1beta1",
"kind": "ThirdPartyResource",
"versions": [
{
"apiGroup": "group",
"name": "v1"
},
{
"apiGroup": "group",
"name": "v2"
}
]
}
```
Once that is done, you should be able to:
```
curl http://<server>/apis/company.com/v1/foos
```
```
curl -X POST -d @${HOME}/foo.json http://localhost:8080/apis/company.com/v1/namespaces/default/foos
```
```json
{
"kind": "Foo",
"apiVersion": "company.com/v1",
"metadata": {
"name": "baz"
},
"someField": "hello world",
"otherField": 1
}
```
After this PR, you can do:
```
kubectl create -f foo.json
```
```
kubectl get foos
```
etc.
Automatic merge from submit-queue
Migrate to the new conversion generator - part1
This PR contains two commits:
- few more fixes to the generator
- migration of the pkg/api/v1 to use the new generator
The second commit is big, but I reviewed the changes and they contain:
- conversions between types that we didn't even generating conversion between
- changes in how we handle maps/pointers/slices - previously we were explicitly referencing fields, now we are using "shadowing in, out" to make the code more generic
- lack of auto-generated method for ReplicationControllerSpec (because these types are different (*int vs int for Replicas) and a preexisting conversion already exists
Most of issues in the first commit (e.g. adding references to "in" and "out" for slices/maps/points) were discovered by our tests. So I'm pretty confident that this change is correct now.
Automatic merge from submit-queue
Retry github and godep operations in test-dockerized.sh
closes#21887.
Attempt to mitigate go get and godep flakes by retrying a few times inside of jenkins
Automatic merge from submit-queue
When checking for leak look only at additional resources
This should help with "fake" leaks, when run deletes stuff that was leaked in a previous one.
cc @zmerlynn @ixdy @wojtek-t
Automatic merge from submit-queue
rkt: bump rkt version to 1.2.1
Upon bumping the rkt version, `--hostname` is supported. Also we now gets the configs from the rkt api service, so `stage1-image` is deprecated.
cc @yujuhong @Random-Liu
Following up #23100 and #23139, #23319, migrate all gke-trusty jobs to the
`release-1.2` branch, add parallel and subnet test jobs, and bump timeouts
accordingly.
godeps doesn't get everything we want, so fix the problem but write it
to a parallel tree since _workspace is reserved only for godeps auto-generated
files.
After this change, jobs that use Trusty dev images will test against the
`release-1.2` branch, and use Trusty images for both the master and the nodes.
Trusty beta and stable jobs are kept in the `release-1.1` branch, and only use
Trusty images on nodes.
Add two CI jobs that run e2e tests on GCE with Trusty images (on both the master
and the nodes) on the `master` and `release-1.2` branch. Both tests use the
latest Trusty build from its `HEAD`. We will use these jobs to guard
kubernetes-Trusty compatibility.
These jobs mimic the existing `kubernetes-e2e-gce` and `kubernetes-e2e-gce-1-2`,
which follow `kubernetes-build` and `kubernetes-build-1-2`, respectively.
Additionally, move all Trusty related jobs into one section in the config file.
The reasons why checks are skipped is now more explicit. Output is also
improved a bit, giving both the check name and the runtime on the
pass/fail line.
This commit also makes `make verify`, Travis, and Shippable all use
hack/verify-all.sh instead of calling scripts explicitly, as we had been
doing on Jenkins. Everything should now be consistent.
Out tests for features that didn't exist in old golang versions (like
gofmt didn't exist in 1.3 or the linker didn't want an = in 1.4) checked
for the new version. But this means every time there is a new version we
have to update the test. This PR inverts the test. We do it the old way
for the old version and if a new version comes along we just assume it
is going to work the new way.
This change revises the way to provide kube-system manifests for clusters on Trusty. Originally, we maintained copies of some manifests under cluster/gce/trusty/kube-manifests, which is not scalable and hard to maintain. With this change, clusters on Trusty will use the same source of manifests as ContainerVM. This change also fixes some minor problems such as shell variables and comments to meet the style guidance better.
