Automatic merge from submit-queue
Fix confusing log messages
While debugging https://github.com/kubernetes/kubernetes/issues/33876 , I noticed following confusing message:
```
The status of Pod kibana-logging-v1-j99la is Running, waiting for it to be either Running or Failed
```
Automatic merge from submit-queue
annotate some addtional errors in e2e tests
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
**What this PR does / why we need it**:
Adds some additional context to e2e test failures.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)*: some work toward #34059
**Special notes for your reviewer**: I didn't want to go through all of the offending cases so I picked off a few files and addressed those.
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
```release-note
NONE
```
Automatic merge from submit-queue
remove testapi.Default.GroupVersion
I'm going to try to take this as a series of mechanicals. This removes `testapi.Default.GroupVersion()` and replaces it with `registered.GroupOrDie(api.GroupName).GroupVersion`.
@caesarxuchao I'm trying to see how much of `pkg/api/testapi` I can remove.
Automatic merge from submit-queue
Update GCI_VERSION to gci-dev-55-8866-0-0
Update GCI base image:
Change log:
* Built-in kubernetes updated to v1.4.0
* Enabled VXLAN and IP_SET config options in kernel to support some networking tools
* OpenSSL CVE fixes
```release-note
Update GCI base image:
* Enabled VXLAN and IP_SET config options in kernel to support some networking tools (ebtools)
* OpenSSL CVE fixes
```
cc/ @kubernetes/goog-image cc/ @dchen1107
Automatic merge from submit-queue
try to use ifdown/ifup if available
Tried this on both ContainerVM and GCI image.
`ip link set eth0 down` is too destructive for containerVM. It could not recover with correct network setup hence failing the test. Need to use ifdown/ifup on containerVM.
reference:
http://serverfault.com/questions/603906/ip-link-set-not-assigning-ip-address-but-ifup-does
Automatic merge from submit-queue
Revert "Add kubelet awareness to taint tolerant match caculator."
Reverts kubernetes/kubernetes#26501
Original PR was not fully reviewed by @kubernetes/sig-node
cc/ @timothysc @resouer
Automatic merge from submit-queue
Kubelet: Use RepoDigest for ImageID when available
**Release note**:
```release-note
Use manifest digest (as `docker-pullable://`) as ImageID when available (exposes a canonical, pullable image ID for containers).
```
Previously, we used the docker config digest (also called "image ID"
by Docker) for the value of the `ImageID` field in the container status.
This was not particularly useful, since the config manifest is not
what's used to identify the image in a registry, which uses the manifest
digest instead. Docker 1.12+ always populates the RepoDigests field
with the manifest digests, and Docker 1.10 and 1.11 populate it when
images are pulled by digest.
This commit changes `ImageID` to point to the the manifest digest when
available, using the prefix `docker-pullable://` (instead of
`docker://`)
Related to #32159
Automatic merge from submit-queue
Add kubelet awareness to taint tolerant match caculator.
Add kubelet awareness to taint tolerant match caculator.
Ref: #25320
This is required by `TaintEffectNoScheduleNoAdmit` & `TaintEffectNoScheduleNoAdmitNoExecute `, so that node will know if it should expect the taint&tolerant
Automatic merge from submit-queue
Don't set timeouts in clients in tests
We are not setting timeouts in production - we shouldn't do it in tests then...
Addresses point 2. of #31345
Automatic merge from submit-queue
add delete-namespace-on-failure flag
I have been doing this for a while.
Setting `--delete-namespace=false --clean-start=true` only works if you have only one e2e test running in a loop.
This PR lets someone to set `delete-namespace-on-failure=false` and run multiple tests in parallel and preserve the crime scene. It makes it easier to reproduce failures.
Let me know if this is worth it or there are some other tricks I am not aware.
Automatic merge from submit-queue
Delete federation namespace after the test completes
The code was commented because of a bug in namespace deletion which is now fixed.
Note that this deletes the namespace in federation control plane. We still need to delete the namespace from each cluster (cascading deletion)
cc @kubernetes/sig-cluster-federation
Changelog:
* Built-in kubernetes updated to v1.4.0
* Enabled VXLAN and IP_SET config options in kernel to support some networking tools
* OpenSSL CVE fixes
Automatic merge from submit-queue
Revert "Revert "move pod networking tests common""
Reverts #34011
And fix the problem causing `Granular Checks: Services [Slow] should update nodePort` tests to fail
Automatic merge from submit-queue
CRI: Add serial and benchmark test suite.
For https://github.com/kubernetes/kubernetes/issues/31459.
The serial test result will be shown on test-grid.
The benchmark test result will be shown [node-perf-dash](http://node-perf-dash.k8s.io/#/builds)
This PR also changes the cri validation test to use the same gci image with node e2e instead of the canary image. The docker version is still 1.11.2.
@yujuhong @feiskyer @yifan-gu
/cc @kubernetes/sig-node
Automatic merge from submit-queue
CRI: Add presubmit CRI validation test.
For #31459.
This PR adds a new suite for CRI presubmit validation which runs non-flaky, non-serial, non-slow test per-pr.
Except this PR, I'll also change the test-infra side. Ideally, after this is done, we should be be able to trigger CRI validation test per-pr with something like `@k8s-bot cri node e2e test this` and `@k8s-bot cri e2e test this`.
@yujuhong @feiskyer @yifan-gu @freehan
/cc @kubernetes/sig-node
Automatic merge from submit-queue
Add a retry loop to KubeletManagerEtcHosts flake
Add a retry loop to KubeletManagerEtcHosts flake
Note: this still makes the test fail if a retry occurs, but
will give us more information regarding whether or not the
test flake could be occuring due to delay in mounting of
/etc/hosts.
Automatic merge from submit-queue
Fix#31085, include output checking in retry loop
Fix#31085.
`wget -qO-` might omit the error and `RunHostCmd()` won't be able to catch it sometimes. Verify stdout is not empty within the retry loop to fix. Test passed 1500+ times in a row.
@freehan
Note: this still makes the test fail if a retry occurs, but
will give us more information regarding whether or not the
test flake could be occuring due to delay in mounting of
/etc/hosts.
Automatic merge from submit-queue
Check for empty string post trimming
We curl in a retry loop and timeout, trimming stdout to find endpoint names. When curl hits the timeout, stdout is empty, so we insert the empty string into the received set of endpoints.
Fixes https://github.com/kubernetes/kubernetes/issues/32684
Automatic merge from submit-queue
Improve source ip preservation test, fail the test instead of panic.
From #31085.
The source IP preserve test starts to be flake again. Sending out this PR to get rid of panicing and log the unexpected output for future investigation.
@freehan
Automatic merge from submit-queue
fix loopback client config for integration tests
Wires an authenticator/authorizer pair much closer to what the actual master start does. Several pulls I have in progress require this.
@liggitt second commit wiring changes.
Automatic merge from submit-queue
[Client-gen] Let versioned client use versioned options
i.e., use v1.ListOptions, v1.DeleteOptions when possible.
Remove the extension/v1beta1.ListOptions, because it's exactly the same as v1.ListOptions, and is not referred throughout the code base. After its removal, I register v1.ListOptions during extensions/v1beta1 scheme registration.
First three commits are manual changes.
Fix#27753
cc @lavalamp
Automatic merge from submit-queue
Add a check for file size if the reading content returns empty
In order to debug the flaky tests for writing/reading files via
contains, this PR adds a check for file size if reading returns empty
content.
Automatic merge from submit-queue
Fix kubelet perf data to make it work again for perfdash.
Addresses https://github.com/kubernetes/kubernetes/pull/30333#issuecomment-248791257.
Add the "node" label back to fix kubelet perf dash. At least for now, we still need original perfdash to catch summary api performance regression.
/cc @coufon @yujuhong
Previously, we used the docker config digest (also called "image ID"
by Docker) for the value of the `ImageID` field in the container status.
This was not particularly useful, since the config manifest is not
what's used to identify the image in a registry, which uses the manifest
digest instead. Docker 1.12+ always populates the RepoDigests field
with the manifest digests, and Docker 1.10 and 1.11 populate it when
images are pulled by digest.
This commit changes `ImageID` to point to the the manifest digest when
available, using the prefix `docker-pullable://` (instead of
`docker://`)
Automatic merge from submit-queue
Heal the namespaceless ingresses in federation e2e.
For createIngressOrFail, it incorrectly returned the ingress passed in as an argument, which does not include the namespace, instead of the ingress returned from the create call (which does).
This in turn leads to errors in e2e tests like this:
INFO: Waiting for Ingress federated-ingress to acquire IP, error an empty namespace may not be set when a resource name is provided.
Self-applying LGTM label, as this is the same code that was LGTM'd by @nikhiljindal in #33502
Automatic merge from submit-queue
Delete evicted pet
If pet was evicted by kubelet - it will stuck in this state forever.
By analogy to regular pod we need to re-create pet so that it will
be re-scheduled to another node, so in order to re-create pet
and preserve consitent naming we will delete it in petset controller
and create after that.
fixes: https://github.com/kubernetes/kubernetes/issues/31098
Automatic merge from submit-queue
Deregister clusters during federated namespace e2e tear down.
This is causing other tests to leak resources.
cc @mwielgus @kubernetes/sig-cluster-federation
Automatic merge from submit-queue
Fix summary test
Issue was comparing an `unversioned.Time` rather than `time.Time`. I temporarily removed the `[Flaky]` tag so the PR builder will run the test. I will revert that change before submitting.
Automatic merge from submit-queue
fix kubectl taint e2e flake: add retries for removing taint
**What this PR does / why we need it**:
Why we need it: recent failures occurred in #29503 are caused by taints removing conflict on nodes, this PR is to fix it. (#33073 fixed taints updating conflict, but not taints removing.)
What this PR does: use `runKubectlRetryOrDie()` instead of `RunKubectlOrDie()` in all the places in "Kubectl taint" e2e tests.
**Which issue this PR fixes** : fixes part of #29503, (would like to keep this issue open for some days more to make sure no other failures occur)
**Special notes for your reviewer**: NONE
**Release note**: NONE
Automatic merge from submit-queue
Provide more detailed error message when pod fails to be success state
Return more detailed error message when it timeouts for waiting for pod to success state.
This PR extends #31895. #31895 is for running and ready state.
It is used for debugging #31561#32980
cc: @lavalamp
Automatic merge from submit-queue
pass loopback config to poststart hooks
Updates post start hooks to take a clientconfig with the new loopback credentials for bootstrapping.
@ericchiang This is a little bit of plumbing, but mainly auth I think.
Automatic merge from submit-queue
Add ECDSA support for service account tokens
Fixes#28180
```release-note
ECDSA keys can now be used for signing and verifying service account tokens.
```
Automatic merge from submit-queue
Increase timeout for federated ingress test.
Right now federated ingress e2e takes more than 1 minute, as we need to wait for the first clusters ingress to have an IP address allocated to it before creating the others. Sometimes this takes a while due to GCE loadbalancer backend delays.
Automatic merge from submit-queue
move core storage out of master.go
Moves the core resource creation out of master.go and makes it more congruent to the other storages.
WIP because I haven't run tests yet, but I figured I'd see what breaks in the morning.
