The nat KUBE-SERVICES chain is called from OUTPUT and PREROUTING stages. In
clusters with large number of services, the nat-KUBE-SERVICES chain is the largest
chain with for eg: 33k rules. This patch aims to move the KubeMarkMasq rules from
the kubeServicesChain into the respective KUBE-SVC-* chains. This way during each
packet-rule matching we won't have to traverse the MASQ rules of all services which
get accumulated in the KUBE-SERVICES and/or KUBE-NODEPORTS chains. Since the
jump to KUBE-MARK-MASQ ultimately sets the 0x400 mark for nodeIP SNAT, it should not
matter whether the jump is made from KUBE-SERVICES or KUBE-SVC-* chains.
Specifically we change:
1) For ClusterIP svc, we move the KUBE-MARK-MASQ jump rule from KUBE-SERVICES
chain into KUBE-SVC-* chain.
2) For ExternalIP svc, we move the KUBE-MARK-MASQ jump rule in the case of
non-ServiceExternalTrafficPolicyTypeLocal from KUBE-SERVICES
chain into KUBE-SVC-* chain.
3) For NodePorts svc, we move the KUBE-MARK-MASQ jump rule in case of
non-ServiceExternalTrafficPolicyTypeLocal from KUBE-NODEPORTS chain to
KUBE-SVC-* chain.
4) For load-balancer svc, we don't change anything since it is already svc specific
due to creation of KUBE-FW-* chains per svc.
This would cut the rules per svc in KUBE-SERVICES and KUBE-NODEPORTS in half.
1. Do not describe port type in message because lp.String() already has the
information.
2. Remove duplicate error detail from event log.
Previous log is like this.
47s Warning listen tcp4 :30764: socket: too many open files node/127.0.0.1 can't open port "nodePort for default/temp-svc:834" (:30764/tcp4), skipping it: listen tcp4 :30764: socket: too many open files
[issue]
When creating a NodePort service with the kubectl create command, the NodePort
assignment may fail.
Failure to assign a NodePort can be simulated with the following malicious
command[1].
$ kubectl create service nodeport temp-svc --tcp=`python3 <<EOF
print("1", end="")
for i in range(2, 1026):
print("," + str(i), end="")
EOF
`
The command succeeds and shows following output.
service/temp-svc created
The service has been successfully generated and can also be referenced with the
get command.
$ kubectl get svc
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S)
temp-svc NodePort 10.0.0.139 <none> 1:31335/TCP,2:32367/TCP,3:30263/TCP,(omitted),1023:31821/TCP,1024:32475/TCP,1025:30311/TCP 12s
The user does not recognize failure to assign a NodePort because
create/get/describe command does not show any error. This is the issue.
[solution]
Users can notice errors by looking at the kube-proxy logs, but it may be difficult to see the kube-proxy logs of all nodes.
E0327 08:50:10.216571 660960 proxier.go:1286] "can't open port, skipping this nodePort" err="listen tcp4 :30641: socket: too many open files" port="\"nodePort for default/temp-svc:744\" (:30641/tcp4)"
E0327 08:50:10.216611 660960 proxier.go:1286] "can't open port, skipping this nodePort" err="listen tcp4 :30827: socket: too many open files" port="\"nodePort for default/temp-svc:857\" (:30827/tcp4)"
...
E0327 08:50:10.217119 660960 proxier.go:1286] "can't open port, skipping this nodePort" err="listen tcp4 :32484: socket: too many open files" port="\"nodePort for default/temp-svc:805\" (:32484/tcp4)"
E0327 08:50:10.217293 660960 proxier.go:1612] "Failed to execute iptables-restore" err="pipe2: too many open files ()"
I0327 08:50:10.217341 660960 proxier.go:1615] "Closing local ports after iptables-restore failure"
So, this patch will fire an event when NodePort assignment fails.
In fact, when the externalIP assignment fails, it is also notified by event.
The event will be displayed like this.
$ kubectl get event
LAST SEEN TYPE REASON OBJECT MESSAGE
...
2s Warning listen tcp4 :31055: socket: too many open files node/127.0.0.1 can't open "nodePort for default/temp-svc:901" (:31055/tcp4), skipping this nodePort: listen tcp4 :31055: socket: too many open files
2s Warning listen tcp4 :31422: socket: too many open files node/127.0.0.1 can't open "nodePort for default/temp-svc:474" (:31422/tcp4), skipping this nodePort: listen tcp4 :31422: socket: too many open files
...
This PR fixes iptables and ipvs proxier.
Since userspace proxier does not seem to be affected by this issue, it is not fixed.
[1] Assume that fd limit is 1024(default).
$ ulimit -n
1024
1. Add API definitions;
2. Add feature gate and drops the field when feature gate is not on;
3. Set default values for the field;
4. Add API Validation
5. add kube-proxy iptables and ipvs implementations
6. add tests
Clear conntrack entries for UDP NodePorts,
this has to be done AFTER the iptables rules are programmed.
It can happen that traffic to the NodePort hits the host before
the iptables rules are programmed this will create an stale entry
in conntrack that will blackhole the traffic, so we need to
clear it ONLY when the service has endpoints.
1. For iptables mode, add KUBE-NODEPORTS chain in filter table. Add
rules to allow healthcheck node port traffic.
2. For ipvs mode, add KUBE-NODE-PORT chain in filter table. Add
KUBE-HEALTH-CHECK-NODE-PORT ipset to allow traffic to healthcheck
node port.
Currently kube-proxy treat ExternalIPs differently depending on:
- the traffic origin
- if the ExternalIP is present or not in the system.
It also depends on the CNI implementation to
discriminate between local and non-local traffic.
Since the ExternalIP belongs to a Service, we can avoid the roundtrip
of sending outside the traffic originated in the cluster.
Also, we leverage the new LocalTrafficDetector to detect the local
traffic and not rely on the CNI implementations for this.
A previous PR (#71573) intended to clear conntrack entry on endpoint
changes when using nodeport by introducing a dedicated function to
remove the stale conntrack entry on the node port and allow traffic to
resume. By doing so, it has introduced a nodeport specific bug where the
conntrack entries related to the ClusterIP does not get clean if
endpoint is changed (issue #96174). We fix by doing ClusterIP cleanup in
all cases.
* api: structure change
* api: defaulting, conversion, and validation
* [FIX] validation: auto remove second ip/family when service changes to SingleStack
* [FIX] api: defaulting, conversion, and validation
* api-server: clusterIPs alloc, printers, storage and strategy
* [FIX] clusterIPs default on read
* alloc: auto remove second ip/family when service changes to SingleStack
* api-server: repair loop handling for clusterIPs
* api-server: force kubernetes default service into single stack
* api-server: tie dualstack feature flag with endpoint feature flag
* controller-manager: feature flag, endpoint, and endpointSlice controllers handling multi family service
* [FIX] controller-manager: feature flag, endpoint, and endpointSlicecontrollers handling multi family service
* kube-proxy: feature-flag, utils, proxier, and meta proxier
* [FIX] kubeproxy: call both proxier at the same time
* kubenet: remove forced pod IP sorting
* kubectl: modify describe to include ClusterIPs, IPFamilies, and IPFamilyPolicy
* e2e: fix tests that depends on IPFamily field AND add dual stack tests
* e2e: fix expected error message for ClusterIP immutability
* add integration tests for dualstack
the third phase of dual stack is a very complex change in the API,
basically it introduces Dual Stack services. Main changes are:
- It pluralizes the Service IPFamily field to IPFamilies,
and removes the singular field.
- It introduces a new field IPFamilyPolicyType that can take
3 values to express the "dual-stack(mad)ness" of the cluster:
SingleStack, PreferDualStack and RequireDualStack
- It pluralizes ClusterIP to ClusterIPs.
The goal is to add coverage to the services API operations,
taking into account the 6 different modes a cluster can have:
- single stack: IP4 or IPv6 (as of today)
- dual stack: IPv4 only, IPv6 only, IPv4 - IPv6, IPv6 - IPv4
* [FIX] add integration tests for dualstack
* generated data
* generated files
Co-authored-by: Antonio Ojea <aojea@redhat.com>
In #56164, we had split the reject rules for non-ep existing services
into KUBE-EXTERNAL-SERVICES chain in order to avoid calling KUBE-SERVICES
from INPUT. However in #74394 KUBE-SERVICES was re-added into INPUT.
As noted in #56164, kernel is sensitive to the size of INPUT chain. This
patch refrains from calling the KUBE-SERVICES chain from INPUT and FORWARD,
instead adds the lb reject rule to the KUBE-EXTERNAL-SERVICES chain which will be
called from INPUT and FORWARD.
Before this fix, a Service with a loadBalancerSourceRange value that
included a space would cause kube-proxy to crashloop. This updates
kube-proxy to trim any space from that field.
It seems that if you set the packet mark on a packet and then route
that packet through a kernel VXLAN interface, the VXLAN-encapsulated
packet will still have the mark from the original packet. Since our
NAT rules are based on the packet mark, this was causing us to
double-NAT some packets, which then triggered a kernel checksumming
bug. But even without the checksum bug, there are reasons to avoid
double-NATting, so fix the rules to unmark the packets before
masquerading them.
Fixes two small issues with the metric added in #90175:
1. Bump the timestamp on initial informer sync. Otherwise it remains 0 if
restarting kube-proxy in a quiescent cluster, which isn't quite right.
2. Bump the timestamp even if no healthz server is specified.
This adds a metric, kubeproxy_sync_proxy_rules_last_queued_timestamp,
that captures the last time a change was queued to be applied to the
proxy. This matches the healthz logic, which fails if a pending change
is stale.
This allows us to write alerts that mirror healthz.
Signed-off-by: Casey Callendrello <cdc@redhat.com>
This allows the proxier to cache local addresses instead of fetching all
local addresses every time in IsLocalIP.
Signed-off-by: Andrew Sy Kim <kiman@vmware.com>
This avoids fetching all local network interfaces everytime we sync an
external IP. For clusters with many external IPs this gets really
expensive. This change caches all local addresses once per sync.
Signed-off-by: Andrew Sy Kim <kiman@vmware.com>
This creates a new EndpointSliceProxying feature gate to cover EndpointSlice
consumption (kube-proxy) and allow the existing EndpointSlice feature gate to
focus on EndpointSlice production only. Along with that addition, this enables
the EndpointSlice feature gate by default, now only affecting the controller.
The rationale here is that it's really difficult to guarantee all EndpointSlices
are created in a cluster upgrade process before kube-proxy attempts to consume
them. Although masters are generally upgraded before nodes, and in most cases,
the controller would have enough time to create EndpointSlices before a new node
with kube-proxy spun up, there are plenty of edge cases where that might not be
the case. The primary limitation on EndpointSlice creation is the API rate limit
of 20QPS. In clusters with a lot of endpoints and/or with a lot of other API
requests, it could be difficult to create all the EndpointSlices before a new
node with kube-proxy targeting EndpointSlices spun up.
Separating this into 2 feature gates allows for a more gradual rollout with the
EndpointSlice controller being enabled by default in 1.18, and EndpointSlices
for kube-proxy being enabled by default in the next release.
Errors from staticcheck:
pkg/proxy/healthcheck/proxier_health.go:55:2: field port is unused (U1000)
pkg/proxy/healthcheck/proxier_health.go:162:20: printf-style function with dynamic format string and no further arguments should use print-style function instead (SA1006)
pkg/proxy/healthcheck/service_health.go:166:20: printf-style function with dynamic format string and no further arguments should use print-style function instead (SA1006)
pkg/proxy/iptables/proxier.go:737:2: this value of args is never used (SA4006)
pkg/proxy/iptables/proxier.go:737:15: this result of append is never used, except maybe in other appends (SA4010)
pkg/proxy/iptables/proxier.go:1287:28: this result of append is never used, except maybe in other appends (SA4010)
pkg/proxy/userspace/proxysocket.go:293:3: this value of n is never used (SA4006)
pkg/proxy/winkernel/metrics.go:74:6: func sinceInMicroseconds is unused (U1000)
pkg/proxy/winkernel/metrics.go:79:6: func sinceInSeconds is unused (U1000)
pkg/proxy/winuserspace/proxier.go:94:2: field portMapMutex is unused (U1000)
pkg/proxy/winuserspace/proxier.go:118:2: field owner is unused (U1000)
pkg/proxy/winuserspace/proxier.go:119:2: field socket is unused (U1000)
pkg/proxy/winuserspace/proxysocket.go:620:4: this value of n is never used (SA4006)
This reverts commit 1ca0ffeaf2.
kube-proxy is not recreating the rules associated to the
KUBE-MARK-DROP chain, that is created by the kubelet.
Is preferrable avoid the dependency between the kubelet and
kube-proxy and that each of them handle their own rules.
Until now, iptables probabilities had 5 decimal places of granularity.
That meant that probabilities would start to repeat once a Service
had 319 or more endpoints.
This doubles the granularity to 10 decimal places, ensuring that
probabilities will not repeat until a Service reaches 100,223 endpoints.
The proxy healthz server assumed that kube-proxy would regularly call
UpdateTimestamp() even when nothing changed, but that's no longer
true. Fix it to only report unhealthiness when updates have been
received from the apiserver but not promptly pushed out to
iptables/ipvs.
Kube-proxy runs two different health servers; one for monitoring the
health of kube-proxy itself, and one for monitoring the health of
specific services. Rename them to "ProxierHealthServer" and
"ServiceHealthServer" to make this clearer, and do a bit of API
cleanup too.
