Automatic merge from submit-queue
Added deprecation notice and guidance for cloud providers.
**What this PR does / why we need it**:
Adding context/background and general guidance for incoming cloud providers.
**Which issue this PR fixes**
**Special notes for your reviewer**:
Generalized message per discussion with @bgrant0607
Automatic merge from submit-queue
clear init container status annotations when cleared in status
When I pod with an init container is terminated due to exceeding its active deadline, the pod status is phase `Failed` with reason `DeadlineExceeded`. All container statuses are cleared from the pod status.
With init containers, however, the status is being regenerated from the status annotations. This is causing kubectl to report the pod state as `Init:0/1` instead of `DeadlineExceeded` because the kubectl printer observes a running init container, which in reality is not running.
This PR clears out the init container status annotations when they have been removed from the pod status so they are not regenerated on the apiserver.
xref https://bugzilla.redhat.com/show_bug.cgi?id=1453180
@derekwaynecarr
```release-note
Fix init container status reporting when active deadline is exceeded.
```
Automatic merge from submit-queue (batch tested with PRs 38505, 41785, 46315)
Fix provisioned GCE PD not being reused if already exists
@jsafrane PTAL
This is another attempt at https://github.com/kubernetes/kubernetes/pull/38702 . We have observed that `gce.service.Disks.Insert(gce.projectID, zone, diskToCreate).Do()` instantly gets an error response of alreadyExists, so we must check for it.
I am not sure if we still need to check for the error after `waitForZoneOp`; I think that if there is an alreadyExists error, the `Do()` above will always respond with it instantly. But because I'm not sure, and to be safe, I will leave it.
Automatic merge from submit-queue (batch tested with PRs 38505, 41785, 46315)
Only retrieve relevant volumes
**What this PR does / why we need it**:
Improves performance for Cinder volume attach/detach calls.
Currently when Cinder volumes are attached or detached, functions try to retrieve details about the volume from the Nova API. Because some only have the volume name not its UUID, they use the list function in gophercloud to iterate over all volumes to find a match. This incurs severe performance problems on OpenStack projects with lots of volumes (sometimes thousands) since it needs to send a new request when the current page does not contain a match. A better way of doing this is use the `?name=XXX` query parameter to refine the results.
**Which issue this PR fixes**:
https://github.com/kubernetes/kubernetes/issues/26404
**Special notes for your reviewer**:
There were 2 ways of addressing this problem:
1. Use the `name` query parameter
2. Instead of using the list function, switch to using volume UUIDs and use the GET function instead. You'd need to change the signature of a few functions though, such as [`DeleteVolume`](https://github.com/kubernetes/kubernetes/blob/master/pkg/volume/cinder/cinder.go#L49), so I'm not sure how backwards compatible that is.
Since #1 does effectively the same as #2, I went with it because it ensures BC.
One assumption that is made is that the `volumeName` being retrieved matches exactly the name of the volume in Cinder. I'm not sure how accurate that is, but I see no reason why cloud providers would want to append/prefix things arbitrarily.
**Release note**:
```release-note
Improves performance of Cinder volume attach/detach operations
```
An admin wants to specify in which AWS availability zone(s) users may create persistent volumes using dynamic provisioning.
That's why the admin can now configure in StorageClass object a comma separated list of zones. Dynamically created PVs for PVCs that use the StorageClass are created in one of the configured zones.
An admin wants to specify in which GCE availability zone(s) users may create persistent volumes using dynamic provisioning.
That's why the admin can now configure in StorageClass object a comma separated list of zones. Dynamically created PVs for PVCs that use the StorageClass are created in one of the configured zones.
The zone parameter provided in a Storage Class may erroneously be an empty string or contain only spaces and tab characters. Such situation shall be detected and reported as an error.
That's why the func ValidateZone was added.
An admin shall be able to configure a comma separated list of zones for a StorageClass.
That's why the func ZonesToSet (string) (set.String, error) is added. The func ZonesToSet converts a string containing a comma separated list of zones to a set. In case the list contains an empty zone an error is returned.
Automatic merge from submit-queue (batch tested with PRs 45891, 46147)
Watching ClusterId from within GCE cloud provider
**What this PR does / why we need it**:
Adds the ability for the GCE cloud provider to watch a config map for `clusterId` and `providerId`.
WIP - still needs more testing
cc @MrHohn @csbell @madhusudancs @thockin @bowei @nikhiljindal
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 45891, 46147)
fix typo
**What this PR does / why we need it**:
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue (batch tested with PRs 45514, 45635)
refactor certificate controller to break it into two parts
Break pkg/controller/certificates into:
* pkg/controller/certificates/approver: containing the group approver
* pkg/controller/certificates/signer: containing the local signer
* pkg/controller/certificates: containing shared infrastructure
```release-note
Break the 'certificatesigningrequests' controller into a 'csrapprover' controller and 'csrsigner' controller.
```
GenericPLEG's 1s relist() loop races against pod network setup. It
may be called after the infra container has started but before
network setup is done, since PLEG and the runtime's SyncPod() run
in different goroutines.
Track network setup status and don't bother trying to read the pod's
IP address if networking is not yet ready.
See also: https://bugzilla.redhat.com/show_bug.cgi?id=1434950
Mar 22 12:18:17 ip-172-31-43-89 atomic-openshift-node: E0322
12:18:17.651013 25624 docker_manager.go:378] NetworkPlugin
cni failed on the status hook for pod 'pausepods22' - Unexpected
command output Device "eth0" does not exist.
Runtimes should never return "" and nil errors, since network plugin
drivers need to treat netns differently in different cases. So return
errors when we can't get the netns, and fix up the plugins to do the
right thing.
Namely, we don't need a NetNS on pod network teardown. We do need
a netns for pod Status checks and for network setup.
This reverts commit fee4c9a7d9.
This is not the correct fix for the problem; and it causes other problems
like continuous:
docker_sandbox.go:234] NetworkPlugin cni failed on the status hook for pod
"someotherdc-1-deploy_default": Unexpected command output nsenter: cannot
open : No such file or directory with error: exit status 1
Because GetNetNS() is returning an empty network namespace. That is
not helpful nor should really be allowed; that's what the error return
from GetNetNS() is for.
Automatic merge from submit-queue (batch tested with PRs 42042, 46139, 46126, 46258, 46312)
Remove kubectl's dependence on pkg/api/helper
**What this PR does / why we need it**:
Remove kubectl's dependence on pkg/api/helper, as part of
broader effort to isolate kubectl from the rest of k8s.
In this case, the code becomes private to kubectl; nobody else uses it.
**Which issue this PR fixes**
Part of a series of PRs to address kubernetes/community#598
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 42042, 46139, 46126, 46258, 46312)
[Federation] Use service accounts instead of the user's credentials when accessing joined clusters' API servers.
Fixes#41267.
Release notes:
```release-note
Modifies kubefed to create and the federation controller manager to use credentials associated with a service account rather than the user's credentials.
```
Automatic merge from submit-queue
Fix some typo of comment in kubelet.go
**What this PR does / why we need it**:
The PR is to fix some typo in kubelet.go
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
N/A
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue
remove init blocks from all admission plugins
**What this PR does / why we need it**:
removes init blocks from all admission plugins
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 46149, 45897, 46293, 46296, 46194)
GC: update required verbs for deletable resources, allow list of ignored resources to be customized
The garbage collector controller currently needs to list, watch, get,
patch, update, and delete resources. Update the criteria for
deletable resources to reflect this.
Also allow the list of resources the garbage collector controller should
ignore to be customizable, so downstream integrators can add their own
resources to the list, if necessary.
cc @caesarxuchao @deads2k @smarterclayton @mfojtik @liggitt @sttts @kubernetes/sig-api-machinery-pr-reviews
Automatic merge from submit-queue
Double `StopContainer` request timeout.
Doubled `StopContainer` request timeout to leave some time for `SIGKILL` container.
@yujuhong @feiskyer
Automatic merge from submit-queue (batch tested with PRs 45587, 46286)
fix typo in kubelet
**What this PR does / why we need it**:
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 45587, 46286)
PDB Max Unavailable Field
Completes https://github.com/kubernetes/features/issues/285
```release-note
Adds a MaxUnavailable field to PodDisruptionBudget
```
Individual commits are self-contained; Last commit can be ignored because it is autogenerated code.
cc @kubernetes/sig-apps-api-reviews @kubernetes/sig-apps-pr-reviews
Allow the list of resources the garbage collector controller should
ignore to be customizable, so downstream integrators can add their own
resources to the list, if necessary.
