The implementation consists of
- identifying all places where VolumeSource.PersistentVolumeClaim has
a special meaning and then ensuring that the same code path is taken
for an ephemeral volume, with the ownership check
- adding a controller that produces the PVCs for each embedded
VolumeSource.EphemeralVolume
- relaxing the PVC protection controller such that it removes
the finalizer already before the pod is deleted (only
if the GenericEphemeralVolume feature is enabled): this is
needed to break a cycle where foreground deletion of the pod
blocks on removing the PVC, which waits for deletion of the pod
The controller was derived from the endpointslices controller.
* Creates private keys and CSR files for all the control-plane certificates
* Helps with External CA mode of kubeadm
Signed-off-by: Richard Wall <richard.wall@jetstack.io>
Back in the v1alpha2 days the fuzzer test needed to be disabled. To ensure that
there were no config breaks and everything worked correctly extensive replacement
tests were put in place that functioned as unit tests for the kubeadm config utils
as well.
The fuzzer test has been reenabled for a long time now and there's no need for
these replacements. Hence, over time most of these were disabled, deleted and
refactored. The last remnants are part of the LoadJoinConfigurationFromFile test.
The test data for those old tests remains largely unused today, but it still receives
updates as it contains kubelet's and kube-proxy's component configs. Updates to these
configs are usually done because the maintainers of those need to add a new field.
Hence, to cleanup old code and reduce maintenance burden, the last test that depends
on this test data is finally refactored and cleaned up to represent a simple unit test
of `LoadJoinConfigurationFromFile`.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
Over the course of recent development of the `componentconfigs` package,
it became evident that most of the tests in this package cannot be implemented without
using a component config. As all of the currently supported component configs are
external to the kubeadm project (kubelet and kube-proxy), practically all of the tests
in this package are now dependent on external code.
This is not desirable, because other component's configs may change frequently and
without much of a notice. In particular many configs add new fields without bumping their
versions. In addition to that, some components may be deprecated in the future and many
tests may use their configs as a place holder of a component config just to test some
common functionality.
To top that, there are many tests that test the same common functionality several times
(for each different component config).
Thus a kubeadm managed replacement and a fake test environment are introduced.
The new test environment uses kubeadm's very own `ClusterConfiguration`.
ClusterConfiguration is normally not managed by the `componentconfigs` package.
It's only used, because of the following:
- It's a versioned API that is under the control of kubeadm maintainers. This enables us to test
the componentconfigs package more thoroughly without having to have full and always up to date
knowledge about the config of another component.
- Other components often introduce new fields in their configs without bumping up the config version.
This, often times, requires that the PR that introduces such new fields to touch kubeadm test code.
Doing so, requires more work on the part of developers and reviewers. When kubeadm moves out of k/k
this would allow for more sporadic breaks in kubeadm tests as PRs that merge in k/k and introduce
new fields won't be able to fix the tests in kubeadm.
- If we implement tests for all common functionality using the config of another component and it gets
deprecated and/or we stop supporting it in production, we'll have to focus on a massive test refactoring
or just continue importing this config just for test use.
Thus, to reduce maintenance costs without sacrificing test coverage, we introduce this mini-framework
and set of tests here which replace the normal component configs with a single one (`ClusterConfiguration`)
and test the component config independent logic of this package.
As a result of this, many of the older test cases are refactored and greatly simplified to reflect
on the new change as well. The old tests that are strictly tied to specific component configs
(like the defaulting tests) are left unchanged.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
Kubeadm setup of kube-controller-manager and kube-scheduler is
lacking the --port=0 option which caused the component to enable
the insecure port by default and serve insecurely on the default
node interface.
Add --port=0 by default to both components. Users are still allowed
the explicitly set the flag (via extraArgs), which allows them
to override this default kubeadm behavior and enable the insecure port.
NOTE: the flag is deprecated and should be removed from kubeadm manifests
once it's removed from core.
`kubeadm config upload` is a GA command that has been deprecated and scheduled
for removal since Kubernetes 1.15 (released 06/19/2019). This change will
finally removed it in Kubernetes 1.19 (planned for August 2020).
The original command has long since been replaced by a GA init phase:
`kubeadm init phase upload-config`
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
Add PatchStaticPod() in staticpod/utils.go
Apply patches to static Pods in:
- phases/controlplane/CreateStaticPodFiles()
- phases/etcd/CreateLocalEtcdStaticPodManifestFile() and
CreateStackedEtcdStaticPodManifestFile()
Add unit tests and update Bazel.
Previously, separate interfaces were defined for Reserve and Unreserve
plugins. However, in nearly all cases, a plugin that allocates a
resource using Reserve will likely want to register itself for Unreserve
as well in order to free the allocated resource at the end of a failed
scheduling/binding cycle. Having separate plugins for Reserve and
Unreserve also adds unnecessary config toil. To that end, this patch
aims to merge the two plugins into a single interface called a
ReservePlugin that requires implementing both the Reserve and Unreserve
methods.
This change enables kubeadm upgrade plan to print a state table with
information regarding known component config API groups. Most importantly this
information includes current and preferred version for each group and an
indication if a manual user upgrade is required.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
`kubeadm upgrade plan` is using the external (currently `v1alpha1`) types of
the kubeadm output API to collect upgrade plans. This is counter intuitive
since code structure gets bound to the whatever version the output API is at.
In addition to that, the versioned API is used only in the very last stages of
a machine readable output (which is currently not implemented).
Hence, to increase flexibility and keep up with the standard Kubernetes
ecosystem practice, `kubeadm upgrade plan` is migrated to use the internal
types of the output API.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
UploadConfiguration() now always retries the underling API calls,
which can make TestUploadConfiguration run for a long time.
Remove the negative test cases, where errors are expected.
Negative test cases should be tested in app/util/apiclient,
where a short timeout / retry count should be possible for unit tests.
Currently, kubeadm would refuse to perfom an upgrade (or even planing for one)
if it detects a user supplied unsupported component config version. Hence,
users are required to manually upgrade their component configs and store them
in the config maps prior to executing `kubeadm upgrade plan` or
`kubeadm upgrade apply`.
This change introduces the ability to use the `--config` option of the
`kubeadm upgrade plan` and `kubeadm upgrade apply` commands to supply a YAML
file containing component configs to be used in place of the existing ones in
the cluster upon upgrade.
The old behavior where `--config` is used to reconfigure a cluster is still
supported. kubeadm automatically detects which behavior to use based on the
presence (or absense) of kubeadm config types (API group
`kubeadm.kubernetes.io`).
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
We were detecting the IP family that kube-proxy should use
based on the bind address, however, this is not valid when
using an unspecified address, because on those cases
kube-proxy adopts the IP family of the address reported
in the Node API object.
The IP family will be determined by the nodeIP used by the proxier
The order of precedence is:
1. config.bindAddress if bindAddress is not 0.0.0.0 or ::
2. the primary IP from the Node object, if set
3. if no IP is found it defaults to 127.0.0.1 and IPv4
Signed-off-by: Antonio Ojea <antonio.ojea.garcia@gmail.com>
If an etcd member with the same address already exists, don't re-add it.
Instead, use the existing member list for creating the "initial cluster"
that is written for this etcd server instance static Pod.
Component configs are used by kubeadm upgrade plan at the moment. However, they
can prevent kubeadm upgrade plan from functioning if loading of an unsupported
version of a component config is attempted. For that matter it's best to just
stop loading component configs as part of the kubeadm config load process.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
Under the feature gate DefaultPodTopologySpread, which will disable the legacy DefaultPodTopologySpread plugin from the default algorithm providers.
Signed-off-by: Aldo Culquicondor <acondor@google.com>
`getK8sVersionFromUserInput` would attempt to load the config from a user
specified YAML file (via the `--config` option of `kubeadm upgrade plan` or
`kubeadm upgrade apply`). This is done in order to fetch the `KubernetesVersion`
field of the `ClusterConfiguration`. The complete config is then immediately
discarded. The actual config that is used during the upgrade process is fetched
from within `enforceRequirements`.
This, along with the fact that `getK8sVersionFromUserInput` is always called
immediately after `enforceRequirements` makes it possible to merge the two.
Merging them would help us simplify things and avoid future problems in
component config related patches.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
Until now, users were always asked to manually convert a component config to a
version supported by kubeadm, if kubeadm is not supporting its version.
This is true even for configs generated with older kubeadm versions, hence
getting users to make manual conversions on kubeadm generated configs.
This is not appropriate and user friendly, although, it tends to be the most
common case. Hence, we sign kubeadm generated component configs stored in
config maps with a SHA256 checksum. If a configs is loaded by kubeadm from a
config map and has a valid signature it's considered "kubeadm generated" and if
a version migration is required, this config is automatically discarded and a
new one is generated.
If there is no checksum or the checksum is not matching, the config is
considered as "user supplied" and, if a version migration is required, kubeadm
will bail out with an error, requiring manual config migration (as it's today).
The behavior when supplying component configs on the kubeadm command line
does not change. Kubeadm would still bail out with an error requiring migration
if it can recognize their groups but not versions.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
In case a malformed flag is passed to k8s components
such as "–foo", where "–" is not an ASCII dash character,
the components currently silently ignore the flag
and treat it as a positional argument.
Make k8s components/commands exit with an error if a positional argument
that is not empty is found. Include a custom error message for all
components except kubeadm, as cobra.NoArgs is used in a lot of
places already (can be fixed in a followup).
The kubelet already handles this properly - e.g.:
'unknown command: "–foo"'
This change affects:
- cloud-controller-manager
- kube-apiserver
- kube-controller-manager
- kube-proxy
- kubeadm {alpha|config|token|version}
- kubemark
Signed-off-by: Monis Khan <mok@vmware.com>
Signed-off-by: Lubomir I. Ivanov <lubomirivanov@vmware.com>
- Use a dummy nodename instead of OS hostname
- Inline toString() function
- Use backticks to wrap expected patch
- Remove redundant test name from error logs
kubelet.DownloadConfig is an old utility function which takes a client set and
a kubelet version, uses them to fetch the kubelet component config from a
config map, and places it in a local file. This function is simple to use, but
it is dangerous and unnecessary. Practically, in all cases the kubelet
configuration is present locally and does not need to be fetched from a config
map on the cluster (it just needs to be stored in a file).
Furthermore, kubelet.DownloadConfig does not use the kubeadm component configs
module in any way. Hence, a kubelet configuration fetched using it may not be
patched, validated, or otherwise, processed in any way by kubeadm other than
piping it to a file.
This patch replaces all but a single kubelet.DownloadConfig invocation with
equivalents that get the local copy of the kubelet component config and just
store it in a file. The sole remaining invocation covers the
`kubeadm upgrade node --kubelet-version` case.
In addition to that, a possible panic is fixed in kubelet.DownloadConfig and
it now takes the kubelet version parameter as string.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
Current calculations assume that -trimpath is not passed to go tool
compile, which is not the case for test binaries built with bazel. This
causes issues for integration tests right now but is generally not
correct.
The approach taken here is a bit of a hack but it works on the
assumption that if and only if trimpath is passed, we are running under
bazel. I didn't see a good spot for pkgPath(), so I just copied it
around.
We can remove all uses of `dockershim` from `cmd/kubelet`, by just
passing the docker options to the kubelet in their pure form, instead of
using them to create a `dockerClientConfig` (which is defined in
dockershim). We can then construct the `dockerClientConfig` only when we
actually need it.
Remove one of two uses of Dockershim in `cmd/kubelet`. The other is for
creating a docker client which we pass to the Kubelet... we will handle
that refactor in a separate diff.
I'm fairly confident, though need to double check, that no one is
actually using this experimental dockershim behavior. If they are, I
think we will want to find a new way to support it (that doesn't require
using the Kubelet only to launch Dockershim).
kubeadm is setting the IPv6DualStack feature gate in the command line of the kubelet.
However, the kubelet is gradually moving away from command line flags towards component config use.
Hence, we should set the IPv6DualStack feature gate in the component config instead.
Signed-off-by: Rostislav M. Georgiev <rostislavg@vmware.com>
In slower setups it can take more time for the existing cluster
to be in a healthy state, so the existing backoff of ~50 seconds
is apparently not sufficient.
The client dial can also fail for similar reasons.
Improve kubeadm's join toleration of adding new etcd members.
Wrap both the client dial and member add in a longer backoff
(up to ~200 seconds).
This particular change should be backported to the support skew.
In a future change for master, all etcd client operations should be
make consistent so that the etcd logic is in a sane state.
specifically:
- cmd/kubeadm/.import-restrictions
- we don't need to explicitly allow k8s.io repos (external or published)
- rm pkg/controller/.import-restrictions
- pkg/client/unversioned was removed in 59042
- pkg/kubectl/.import-restrictions
- pkg/printers is no longer used
- pkg/api was masking all of the pkg/apis prefixes
- rm staging/src/k8s.io/code-generator/cmd/lister-gen/.import-restrictions
- noop / empty file
- test/e2e/framework/.import-restrictions
- we don't need to explicitly allow k8s.io repos (external or published)
yaml has comments, so we can explain why we have certain rules or
certain prefixes
for those files that weren't already commented yaml, I converted them to
yaml and took a best guess at comments based on the PRs that introduced
or updated them
Use an init container that performs the pre-pull of a component
and then start an instance of "pause" as a regular container to
get the DaemonSet Pod in a Running state.
More details on this change in the code comments.
