Kube-proxy will add ipset entries for all node ips for an SCTP nodeport service. This will solve the problem 'SCTP nodeport service is not working for all IPs present in the node when ipvs is enabled. It is working only for node's InternalIP.'
As mentioned in issue #80061, in iptables lock contention case,
we can see increasing rate of iptables restore failures because it
need to grab iptables file lock.
The failure metric can provide administrators more insight
Metrics will be collected in kube-proxy iptables and ipvs modes
Signed-off-by: Hui Luo <luoh@vmware.com>
Kube-proxy's iptables mode used to care whether utiliptables's
EnsureRule was able to use "iptables -C" or if it had to implement it
hackily using "iptables-save". But that became irrelevant when
kube-proxy was reimplemented using "iptables-restore", and no one ever
noticed. So remove that check.
ipvs `getProxyMode` test fails on mac as `utilipvs.GetRequiredIPVSMods`
try to reach `/proc/sys/kernel/osrelease` to find version of the running
linux kernel. Linux kernel version is used to determine the list of required
kernel modules for ipvs.
Logic to determine kernel version is moved to GetKernelVersion
method in LinuxKernelHandler which implements ipvs.KernelHandler.
Mock KernelHandler is used in the test cases.
Read and parse file is converted to go function instead of execing cut.
Computing all node ips twice would always happen when no node port
addresses were explicitly set. The GetNodeAddresses call would return
two zero cidrs (ipv4 and ipv6) and we would then retrieve all node IPs
twice because the loop wouldn't break after the first time.
Also, it is possible for the user to set explicit node port addresses
including both a zero and a non-zero cidr, but this wouldn't make sense
for nodeIPs since the zero cidr would already cause nodeIPs to include
all IPs on the node.
Previously the same ip addresses would be computed for each nodePort
service and this could be CPU intensive for a large number of nodePort
services with a large number of ipaddresses on the node.
refs https://github.com/kubernetes/perf-tests/issues/640
We have too fine buckets granularity for lower latencies, at cost of the higher
latecies (7+ minutes). This is causing spikes in SLI calculated based on that
metrics.
I don't have strong opinion about actual values - those seemed to be better
matching our need. But let's have discussion about them.
Values:
0.015 s
0.030 s
0.060 s
0.120 s
0.240 s
0.480 s
0.960 s
1.920 s
3.840 s
7.680 s
15.360 s
30.720 s
61.440 s
122.880 s
245.760 s
491.520 s
983.040 s
1966.080 s
3932.160 s
7864.320 s
Currently the BaseServiceInfo struct implements the ServicePort interface, but
only uses that interface sometimes. All the elements of BaseServiceInfo are exported
and sometimes the interface is used to access them and othertimes not
I extended the ServicePort interface so that all relevent values can be accessed through
it and unexported all the elements of BaseServiceInfo
This adds some useful metrics around pending changes and last successful
sync time.
The goal is for administrators to be able to alert on proxies that, for
whatever reason, are quite stale.
Signed-off-by: Casey Callendrello <cdc@redhat.com>
use split host port func instead trim specific character
add unit test for metrics and healthz bind address
recover import package
refactor set default kube proxy configuration
fix ipv4 condition
fix set default port condition
rewrite call function occasion to reduce error
set ipv6 default value
move get GetBindAddressHostPort to util
use one func to handle deprecated series
update bazel
define address type
return earlier in the error case
refactor set default kube proxy configuration logic
recover import package
preserve some of the original comments
add get default address func
add append port if needed unit test
rewrite unit test for deprecated flags
remove unused codes
Per recommendation of @thockin:
https://github.com/kubernetes/kubernetes/pull/71735#pullrequestreview-189515580
---
IMO this code is as dead as it could be. The only significant user is OpenShift as far as I know. I'd rather never touch it again, but I know that is not realistic.
Also, it seems like maybe this could be broken into a couple commits for easier review?
I raised some questions about this design, but I think you should add yourselves as approvers in OWNERS for this subdir. If it evolves, I will lose context on the impl. I don't think it is covered by e2e, either (more argument for breaking it to a separate repo and having its own e2e tests)
---
The userspace proxy does not have any ratelimiting and when many
services are used will hammer iptables every time a service or
endpoint change occurs. Instead build up a map of changed
services and process all those changes at once instead of each
time an event comes in. This also ensures that no long-running
processing happens in the same call chain as the OnService*
calls as this blocks other handlers attached to the proxy's
parent ServiceConfig object for long periods of time.
Locking can also now be simplified as the only accesses to the
proxy's serviceMap happen from syncProxyRules(). So instead of
locking in many functions just lock once in syncProxyRules()
like the other proxies do.
https://bugzilla.redhat.com/show_bug.cgi?id=1590589https://bugzilla.redhat.com/show_bug.cgi?id=1689690
If a testcase does time out and 'go test' prints the call stack,
make sure everything from previous tests is cleaned up so the call
stack is easier to understand.
Proxies should be able to cleanly figure out when endpoints have been synced,
so make all ProxyProviders also implement EndpointsHandler and pass those
through to loadbalancers when required.
As part of the endpoint creation process when going from 0 -> 1 conntrack entries
are cleared. This is to prevent an existing conntrack entry from preventing traffic
to the service. Currently the system ignores the existance of the services external IP
addresses, which exposes that errant behavior
This adds the externalIP addresses of udp services to the list of conntrack entries that
get cleared. Allowing traffic to flow
Signed-off-by: Jacob Tanenbaum <jtanenba@redhat.com>
We REJECT every other case. Close this FIXME.
To get this to work in all cases, we have to process service in
filter.INPUT, since LB IPS might be manged as local addresses.
When using NodePort to connect to an endpoint using UDP, if the endpoint is deleted on
restoration of the endpoint traffic does not flow. This happens because conntrack holds
the state of the connection and the proxy does not correctly clear the conntrack entry
for the stale endpoint.
Introduced a new function to conntrack ClearEntriesForPortNAT that uses the endpointIP
and NodePort to remove the stale conntrack entry and allow traffic to resume when
the endpoint is restored.
Signed-off-by: Jacob Tanenbaum <jtanenba@redhat.com>
The current logic is to delete a RS if the number of active connections
is 0. This makes sense for TCP but for UDP the number of active
connections is always 0. This is an issue for DNS queries because the RS
will be deleted but the IPVS connection will remain until it expires
(5mn by default) and if there are a lot of DNS queries, the port will be
reused and queries blackholed. Of course for this to work properly the
service needs to continue to serve queries until the connections expire
(this works fine with the lameduck option of coredns).
- Move from the old github.com/golang/glog to k8s.io/klog
- klog as explicit InitFlags() so we add them as necessary
- we update the other repositories that we vendor that made a similar
change from glog to klog
* github.com/kubernetes/repo-infra
* k8s.io/gengo/
* k8s.io/kube-openapi/
* github.com/google/cadvisor
- Entirely remove all references to glog
- Fix some tests by explicit InitFlags in their init() methods
Change-Id: I92db545ff36fcec83afe98f550c9e630098b3135
while cleaning up ipvs mode. flushing iptable chains first and then
remove the chains. this avoids trying to remove chains that are still
referenced by rules in other chains.
fixes#70615
This will allow for kube-proxy to be run without `privileged` and
with only adding the capability `NET_ADMIN`.
Signed-off-by: Jess Frazelle <acidburn@microsoft.com>
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions here: https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md.
Fix how to use ipvs mode by kubeadm
**What this PR does / why we need it**:
how to use ipvs mode by kubeadm
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue (batch tested with PRs 67694, 64973, 67902). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
SCTP support implementation for Kubernetes
**What this PR does / why we need it**: This PR adds SCTP support to Kubernetes, including Service, Endpoint, and NetworkPolicy.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes#44485
**Special notes for your reviewer**:
**Release note**:
```release-note
SCTP is now supported as additional protocol (alpha) alongside TCP and UDP in Pod, Service, Endpoint, and NetworkPolicy.
```
The requested Service Protocol is checked against the supported protocols of GCE Internal LB. The supported protocols are TCP and UDP.
SCTP is not supported by OpenStack LBaaS. If SCTP is requested in a Service with type=LoadBalancer, the request is rejected. Comment style is also corrected.
SCTP is not allowed for LoadBalancer Service and for HostPort. Kube-proxy can be configured not to start listening on the host port for SCTP: see the new SCTPUserSpaceNode parameter
changed the vendor github.com/nokia/sctp to github.com/ishidawataru/sctp. I.e. from now on we use the upstream version.
netexec.go compilation fixed. Various test cases fixed
SCTP related conformance tests removed. Netexec's pod definition and Dockerfile are updated to expose the new SCTP port(8082)
SCTP related e2e test cases are removed as the e2e test systems do not support SCTP
sctp related firewall config is removed from cluster/gce/util.sh. Variable name sctp_addr is corrected to sctpAddr in pkg/proxy/ipvs/proxier.go
cluster/gce/util.sh is copied from master
Automatic merge from submit-queue (batch tested with PRs 66733, 67472). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
add ut for PortPart()
**What this PR does / why we need it**:
improve ut coverage
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 66491, 66587, 66856, 66657, 66923). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
optimize ipvs get nodeIP
**What this PR does / why we need it**:
Optimize ipvs get nodeIP.
The original ipvs `NodeIPs` need first get all local type address to set1, then get address of dummy device `kube-ipvs0` to set2, then do diff of set1 and set2 to get local addresses we need.
This work gonna result in unnecessary resource consumption, especially for large cluster, will have lots address in dummy device `kube-ipvs0`.
This pr optimized the workaround.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
ipvs: add addrtype match for nodeport
**What this PR does / why we need it**:
before this PR:
```
-A KUBE-SERVICES -m comment --comment "Kubernetes nodeport TCP port for masquerade purpose" -m set --match-set KUBE-NODE-PORT-TCP dst -j KUBE-NODE-PORT
-A KUBE-SERVICES -m comment --comment "Kubernetes service cluster ip + port for masquerade purpose" -m set --match-set KUBE-CLUSTER-IP dst,dst -j KUBE-MARK-MASQ
-A KUBE-SERVICES -m set --match-set KUBE-CLUSTER-IP dst,dst -j ACCEPT
-A KUBE-NODE-PORT -p tcp -m comment --comment "Kubernetes nodeport TCP port with externalTrafficPolicy=local" -m set --match-set KUBE-NODE-PORT-LOCAL-TCP dst -j RETURN
-A KUBE-NODE-PORT -j KUBE-MARK-MASQ
```
after this PR:
```
-A KUBE-NODE-PORT -p tcp -m comment --comment "Kubernetes nodeport TCP port with externalTrafficPolicy=local" -m set --match-set KUBE-NODE-PORT-LOCAL-TCP dst -j RETURN
-A KUBE-NODE-PORT -p tcp -m comment --comment "Kubernetes nodeport TCP port for masquerade purpose" -m set --match-set KUBE-NODE-PORT-TCP dst -j KUBE-MARK-MASQ
-A KUBE-SERVICES -m comment --comment "Kubernetes service cluster ip + port for masquerade purpose" -m set --match-set KUBE-CLUSTER-IP dst,dst -j KUBE-MARK-MASQ
-A KUBE-SERVICES -m set --match-set KUBE-CLUSTER-IP dst,dst -j ACCEPT
-A KUBE-SERVICES -m addrtype --dst-type LOCAL -j KUBE-NODE-PORT
```
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes#65459
**Special notes for your reviewer**:
manually tested cases:
- ClusterIP distributed to pod on same node
- ClusterIP distributed to pod on other node
- NodePort distributed to pod on same node
- NodePort distributed to pod on other node
**Release note**:
```release-note
```
Automatic merge from submit-queue (batch tested with PRs 66196, 67016, 66807, 67023). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
fix spelling mistakes
**What this PR does / why we need it**:
fix spelling mistakes
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Move the` k8s.io/kubernetes/pkg/util/pointer` package to` k8s.io/utils/pointer`
**What this PR does / why we need it**:
Move `k8s.io/kubernetes/pkg/util/pointer` to `shared utils` directory, so that we can use it easily.
Close#66010 accidentally, and can't reopen it, so the same as #66010
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 66489, 66728, 66739). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Reuse iptablesContainerPortalArgs, remove function iptablesContainerNodePortArgs
**What this PR does / why we need it**:
reuse iptablesContainerPortalArgs, remove function iptablesContainerNodePortArgs
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Document ipvs mode has GA in v1.11
**What this PR does / why we need it**:
Document ipvs mode has GA in v1.11.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 66138, 65951). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Don't validate HealthzBindAddress in KubeProxyConfiguration if it's empty
**What this PR does / why we need it**:
https://github.com/kubernetes/kubernetes/pull/49087 added validation for
the HealthzBindAddress field in the KubeProxyConfiguration, but if you pass in
--healthz-port=0 to the kube-proxy CLI, it sets this field to the empty string.
However, an empty string is not a valid value for this field.
This change allows validation to pass if HealthzBindAddress is empty.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Ref #65118
**Special notes for your reviewer**:
**Release note**:
```release-note
Fix validation for HealthzBindAddress in kube-proxy when --healthz-port is set to 0
```
Automatic merge from submit-queue (batch tested with PRs 66136, 64999, 65425, 66120, 66074). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Not step into ipvs.CleanupLeftovers() if canUseIPVS's false
**What this PR does / why we need it**:
Earlier we decide whether we should clean up the left-over ipvs rules inside `ipvs.CleanupLeftovers()`, therefore we call function `ipvs.CanUseIPVSProxier()` two times (and `GetModules()` two times). Actually no need to step into `ipvs.CleanupLeftovers()` if `canUseIPVS` is false.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 66064, 66040). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
fix Local externalTrafficPolicy is not respected for ipvs NodePort
**What this PR does / why we need it**:
Local externalTrafficPolicy is not respected for ipvs NodePort.
This PR fixes it.
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes#66062
**Special notes for your reviewer**:
Manually tested accessing NodePort with externalTrafficPolicy=Local and externalTrafficPolicy=Cluster.
**Release note**:
```release-note
```
These are all flagged by Go 1.11's
more accurate printf checking in go vet,
which runs as part of go test.
Lubomir I. Ivanov <neolit123@gmail.com>
applied ammend for:
pkg/cloudprovider/provivers/vsphere/nodemanager.go
Automatic merge from submit-queue (batch tested with PRs 65882, 65896, 65755, 60549, 65927). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Avoid printing some service comments in iptables rules
According to some profiles, with large number of endpoints in the system, comments mentioning the service in appropriate iptables rules may be responsible for 40% of all iptables contents.
Given that ~70% of memory usage of kube-proxy seems to be because of generated iptables rules, the overall saving may be at the level of 30% or so.
OTOH, we sacrifise a bit understandability of iptables, but this PR only changes some of iptables that contribute to the most painful rules.
@thockin @danwinship @dcbw - thoughts?
Ref #65441
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
add cleanLegacyBindAddr
**What this PR does / why we need it**:
**Which issue(s) this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close the issue(s) when PR gets merged)*:
Fixes#65263
**Special notes for your reviewer**:
To fix the issue,
use `activeBindAddrs` map which represents ip address successfully bind to DefaultDummyDevice in the round of sync
use `currentBindAddrs` map which represents ip addresses bind to DefaultDummyDevice from the system
create a function `cleanLegacyBindAddr` to unbind address which is in `currentBindAddrs` map but not in `activeBindAddrs` map
**Release note**:
```release-note
NONE
```
/sig network
/area kube-proxy
Automatic merge from submit-queue. If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Add missing error handling in schema-related code
**What this PR does / why we need it**:
Adds missing error handling to a few places.
**Which issue(s) this PR fixes**
Updates #51457. Still more work to do to fix the issue - client generation code needs to be updated (addressed in https://github.com/kubernetes/kubernetes/pull/64664).
**Release note**:
```release-note
NONE
```
/kind bug
/sig api-machinery
Duplicated masq rules are created by current implementation:
-A KUBE-NODE-PORT -m comment --comment "mark MASQ for
externaltrafficpolicy=cluster" -j KUBE-MARK-MASQ
-A KUBE-NODE-PORT -j KUBE-MARK-MASQ
The last one is always there. So the one inside if statement could
just be removed.
Automatic merge from submit-queue (batch tested with PRs 65388, 64995). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Always create kubeClusterIPSet in ipvs proxier
**What this PR does / why we need it**:
This PR creates the kubeClusterIPSet ipset even if kube-proxy is started without masqueradeAll and clusterCIDR.
This is necessary to masquerade traffic sent to a clusterIP from the host network namespace. The code to do so is actually already present here: https://github.com/kubernetes/kubernetes/blob/master/pkg/proxy/ipvs/proxier.go#L1220-L1244
However the second else (neither masqueradeAll nor clusterCIDR are set) cannot be used because, before this PR, the initial test `if !proxier.ipsetList[kubeClusterIPSet].isEmpty()` can never return true when masqueradeAll and clusterCIDR are not set because kubeClusterIPSet is empty.
**Which issue(s) this PR fixes**
Fixes#65158
```release-note
Allow access to ClusterIP from the host network namespace when kube-proxy is started in IPVS mode without either masqueradeAll or clusterCIDR flags
```
**Additional comment**
Issue #65158 is closed because ClusterIP access from the host has already fixed in master, except for the case described here (no masquerade flag). More detail in the issue.
