Automatic merge from submit-queue
Make a consistent name ( GlusterFS instead of Gluster) in variables a…
Signed-off-by: Humble Chirammal hchiramm@redhat.com
Automatic merge from submit-queue
Remove PV annotations for quobyte provisioner
This is the last provisioner that uses annotations to pass secrets from provisioner to deleter.
Fixes#34822
@johscheuer, I don't have access to quobyte, please take look and retest the plugin. An e2e test for quobyte would be nice!
@kubernetes/sig-storage
Automatic merge from submit-queue
Remove unused WaitForDetach from Detacher interface and plugins
See issue #33128 and PR #33270
We can't rely on the device name provided by OpenStack Cinder, and thus
must perform detection based on the drive serial number (aka It's cinder ID)
on the kubelet itself.
This needs to be removed now, as part of #33128, as the code can't be
updated to attempt device detection and fallback through to the Cinder
provided deviceName, as detection "fails" when the device is gone, and
if cinder has reported a deviceName that another volume has used in
relaity, then this will block forever (or until the other, unreleated,
volume has been detached)
Automatic merge from submit-queue
Remove GetRootContext method from VolumeHost interface
Remove the `GetRootContext` call from the `VolumeHost` interface, since Kubernetes no longer needs to know the SELinux context of the Kubelet directory.
Per #33951 and #35127.
Depends on #33663; only the last commit is relevant to this PR.
Automatic merge from submit-queue
Initial work on running windows containers on Kubernetes
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
This is the first stab at getting the Kubelet running on Windows (fixes#30279), and getting it to deploy network-accessible pods that consist of Windows containers. Thanks @csrwng, @jbhurat for helping out.
The main challenge with Windows containers at this point is that container networking is not supported. In other words, each container in the pod will get it's own IP address. For this reason, we had to make a couple of changes to the kubelet when it comes to setting the pod's IP in the Pod Status. Instead of using the infra-container's IP, we use the IP address of the first container.
Other approaches we investigated involved "disabling" the infra container, either conditionally on `runtime.GOOS` or having a separate windows-docker container runtime that re-implemented some of the methods (would require some refactoring to avoid maintainability nightmare).
Other changes:
- The default docker endpoint was removed. This results in the docker client using the default for the specific underlying OS.
More detailed documentation on how to setup the Windows kubelet can be found at https://docs.google.com/document/d/1IjwqpwuRdwcuWXuPSxP-uIz0eoJNfAJ9MWwfY20uH3Q.
cc: @ikester @brendandburns @jstarks
Automatic merge from submit-queue
Per Volume Inode Accounting
Collects volume inode stats using the same find command as cadvisor. The command is "find _path_ -xdev -printf '.' | wc -c". The output is passed to the summary api, and will be consumed by the eviction manager.
This cannot be merged yet, as it depends on changes adding the InodesUsed field to the summary api, and the eviction manager consuming this. Expect tests to fail until this happens.
DEPENDS ON #35137
Automatic merge from submit-queue
refactor DeviceOpened() so it won't return error if device doesn't exist
<!-- Thanks for sending a pull request! Here are some tips for you:
1. If this is your first time, read our contributor guidelines https://github.com/kubernetes/kubernetes/blob/master/CONTRIBUTING.md and developer guide https://github.com/kubernetes/kubernetes/blob/master/docs/devel/development.md
2. If you want *faster* PR reviews, read how: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/faster_reviews.md
3. Follow the instructions for writing a release note: https://github.com/kubernetes/kubernetes/blob/master/docs/devel/pull-requests.md#release-notes
-->
**What this PR does / why we need it**:
DeviceOpened() is called after device is unmounted but before detached. Some volumes such as rbd don't support 3rd party detach, they have to be detached during unmount. Once detached, the device path vanishes. This causes false alarm when DeviceOpened() is called.
The fix is to ignore error IsNotExist
**Which issue this PR fixes** _(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)_: fixes #
**Special notes for your reviewer**:
@kubernetes/sig-storage
**Release note**:
<!-- Steps to write your release note:
1. Use the release-note-* labels to set the release note state (if you have access)
2. Enter your extended release note in the below block; leaving it blank means using the PR title as the release note. If no release note is required, just write `NONE`.
-->
``` release-note
```
Signed-off-by: Huamin Chen hchen@redhat.com
See issue #33128
We can't rely on the device name provided by Cinder, and thus must perform
detection based on the drive serial number (aka It's cinder ID) on the
kubelet itself.
This patch re-works the cinder volume attacher to ignore the supplied
deviceName, and instead defer to the pre-existing GetDevicePath method to
discover the device path based on it's serial number and /dev/disk/by-id
mapping.
This new behavior is controller by a config option, as falling back
to the cinder value when we can't discover a device would risk devices
not showing up, falling back to cinder's guess, and detecting the wrong
disk as attached.
We are more liberal in what we accept as a volume id in k8s, and indeed
we ourselves generate names that look like `aws://<zone>/<id>` for
dynamic volumes.
This volume id (hereafter a KubernetesVolumeID) cannot directly be
compared to an AWS volume ID (hereafter an awsVolumeID).
We introduce types for each, to prevent accidental comparison or
confusion.
Issue #35746
This has been unused since 542f2dc7, and relies on deviceName, which
can no longer be relied upon (see issue #33128).
This needs to be removed now, as part of #33128, as the code can't be
updated to attempt device detection and fallback through to the Cinder
provided deviceName, as detection "fails" when the device is gone, and
if cinder has reported a deviceName that another volume has used in
relaity, then this will block forever (or until the other, unreleated,
volume has been detached)
Automatic merge from submit-queue
SELinux Overhaul
Overhauls handling of SELinux in Kubernetes. TLDR: Kubelet dir no longer has to be labeled `svirt_sandbox_file_t`.
Fixes#33351 and #33510. Implements #33951.
Automatic merge from submit-queue
Remove stale volumes if endpoint/svc creation fails.
Remove stale volumes if endpoint/svc creation fails.
Signed-off-by: Humble Chirammal hchiramm@redhat.com
Automatic merge from submit-queue
Require PV provisioner secrets to match type
In 1.5, PV provisioners are allowing targeting namespaced secrets via storageclass params. This adds a requirement that those secrets' type match the volume provisioner plugin name, to prevent targeting and extraction of arbitrary secrets
Helps limit secret targeting issues mentioned in https://github.com/kubernetes/kubernetes/issues/34822
Automatic merge from submit-queue
Add sync state loop in master's volume reconciler
At master volume reconciler, the information about which volumes are
attached to nodes is cached in actual state of world. However, this
information might be out of date in case that node is terminated (volume
is detached automatically). In this situation, reconciler assume volume
is still attached and will not issue attach operation when node comes
back. Pods created on those nodes will fail to mount.
This PR adds the logic to periodically sync up the truth for attached
volumes kept in
the actual state cache. If the volume is no longer attached to the node,
the actual state will be updated to reflect the truth. In turn,
reconciler will take actions if needed.
To avoid issuing many concurrent operations on cloud provider, this PR
tries to add batch operation to check whether a list of volumes are
attached to the node instead of one request per volume.
At master volume reconciler, the information about which volumes are
attached to nodes is cached in actual state of world. However, this
information might be out of date in case that node is terminated (volume
is detached automatically). In this situation, reconciler assume volume
is still attached and will not issue attach operation when node comes
back. Pods created on those nodes will fail to mount.
This PR adds the logic to periodically sync up the truth for attached volumes kept in the actual state cache. If the volume is no longer attached to the node, the actual state will be updated to reflect the truth. In turn, reconciler will take actions if needed.
To avoid issuing many concurrent operations on cloud provider, this PR
tries to add batch operation to check whether a list of volumes are
attached to the node instead of one request per volume.
More details are explained in PR #33760
When kubelet restarts, all the information about the volumes will be
gone from actual/desired states. When update node status with mounted
volumes, the volume list might be empty although there are still volumes
are mounted and in turn causing master to detach those volumes since
they are not in the mounted volumes list. This fix is to make sure only
update mounted volumes list after reconciler starts sync states process.
This sync state process will scan the existing volume directories and
reconstruct actual states if they are missing.
This PR also fixes the problem during orphaned pods' directories. In
case of the pod directory is unmounted but has not yet deleted (e.g.,
interrupted with kubelet restarts), clean up routine will delete the
directory so that the pod directoriy could be cleaned up (it is safe to
delete directory since it is no longer mounted)
The third issue this PR fixes is that during reconstruct volume in
actual state, mounter could not be nil since it is required for creating
container.VolumeMap. If it is nil, it might cause nil pointer exception
in kubelet.
Details are in proposal PR #33203
Don't store Gluster SotrageClass parameters in annotations, it's insecure.
Instead, expect that there is the StorageClass available at the time
when it's needed by Gluster deleter.
Gluster provisioner is interested in pvc.Namespace and I don't want to add
at as a new field in VolumeOptions - it would contain almost whole PVC.
Let's pass direct reference to PVC instead and let the provisioner to pick
information it is interested in.
Automatic merge from submit-queue
Dynamic provisioning for flocker volume plugin
Refactor flocker volume plugin
* [x] Support provisioning beta (#29006)
* [x] Support deletion
* [x] Use bind mounts instead of /flocker in containers
* [x] support ownership management or SELinux relabeling.
* [x] adds volume specification via datasetUUID (this is guranted to be unique)
I based my refactor work to replicate pretty much GCE-PD behaviour
**Related issues**: #29006#26908
@jsafrane @mattbates @wallrj @wallnerryan
Automatic merge from submit-queue
Use strongly-typed types.NodeName for a node name
We had another bug where we confused the hostname with the NodeName.
Also, if we want to use different values for the Node.Name (which is
an important step for making installation easier), we need to keep
better control over this.
A tedious but mechanical commit therefore, to change all uses of the
node name to use types.NodeName
We had another bug where we confused the hostname with the NodeName.
To avoid this happening again, and to make the code more
self-documenting, we use types.NodeName (a typedef alias for string)
whenever we are referring to the Node.Name.
A tedious but mechanical commit therefore, to change all uses of the
node name to use types.NodeName
Also clean up some of the (many) places where the NodeName is referred
to as a hostname (not true on AWS), or an instanceID (not true on GCE),
etc.
Automatic merge from submit-queue
Use secrets for glusterfs provisioning passwords
- no plain password in StorageClass!
- fix the style along the way
- use PV annotations to pass the configuration from provisioners to deleters, inspired by Ceph RBD provisioning.
~~Proposing 1.4:~~
~~- GlusterFS provisioning is a new 1.4 feature~~
~~- if we release GlusterFS provisioner as it is now, we need to support it's API (i.e. plaintext passwords) until 2.0~~
~~- it can break only GlusterFS provisioning, nothing else~~
~~- it's easy to revert~~
@kubernetes/sig-storage
fixes#31871
Automatic merge from submit-queue
Do not report error when deleting an attached volume
Persistent volume controller should not send warning events to a PV and mark the PV as failed when the volume is still attached.
This happens when a user quickly deletes a pod and associated PVC - PV is slowly detaching, while the PVC is already deleted and the PV enters Failed phase.
`Deleter.Deleter` can now return `tryAgainError`, which is sent as INFO to the PV to let the user know we did not forget to delete the PV, however the PV stays in Released state. The controller tries again in the next sync (15 seconds by default).
Fixes#31511
