This bump is done since the latest version of staticcheck includes
a fix for a false positive reported by us, discovered while bumping
to go1.20
Signed-off-by: Madhav Jivrajani <madhav.jiv@gmail.com>
For example, this is a false positive that currently exists in the code base:
test/e2e_node/dra_test.go:129:4: ginkgo-linter: use a function call in Consistently. This actually checks nothing, because Consistently receives the function returned value, instead of function itself, and this value is never changed; consider using `gomega.Consistently(ctx, e2epod.Get).WithArguments(f.ClientSet, pod).WithTimeout(podInPendingStateTimeout).Should(e2epod.BeInPhase(v1.PodPending),
"Pod should be in Pending state as resource preparation time outed")` instead (ginkgolinter)
gomega.Consistently(ctx, e2epod.Get(f.ClientSet, pod)).WithTimeout(podInPendingStateTimeout).Should(e2epod.BeInPhase(v1.PodPending),
^
It's a false positive because e2epod.Get returns the function that Consistently
is meant to call.
This could be worked around by assigning e2epod.Get(f.ClientSet, pod) to a
variable and then use that variable, but that is less readable.
In the wait_node_ready function, two steps are performed:
1.Check if the node exists
2.Wait for the node to enter the ready state
If one step fails, the second step should not continue, wasting 300 seconds.
Container runtimes like CRI-O and containerd reuse the code by copying
it from Kubernetes. To have a single source of truth for the streaming
server we now move the already isolated implementation to the
k8s.io/kubelet staging repository. This way runtimes can re-use the code
without copying the parts.
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
Because this doesn't get invoked through verify.sh, we have to call
logJu ourselves to get a JUnit file. errexit must not be set when
calling logJu, otherwise it does no post-processing.
When sh2ju.sh was called to generate the junit_verify.xml, it used to include
the entire output of a failed script twice: once as failure message, once as
log output.
This output can be large and often the actual failure isn't near the top, but
rather at the end or (in the case of the different golangci-lint invocations)
embedded in the log. This makes them hard to see at a glance when looking at
the Prow result page for a job.
Now a verify script can prefix relevant lines with "ERROR: " and then only
those lines are used as failure message in JUnit, without that prefix.
That string was chosen because Prow itself also then picks up those lines when
viewing the entire build log and it is unlikely that some script prints such
lines when they are not meant to be part of the failure.
If some script outputs no such lines, "see stderr for details" is used as
failure message. This is better than before because it avoids the redundancy.
Fixed ginkgo warning
You're using deprecated Ginkgo functionality:
=============================================
--untilItFails is deprecated, use --until-it-fails instead
Used consistent approach with this flag in e2e_node and e2e scripts.
The setting for garbagecollector was added 7 years ago in 9ac91e5172 for
"debugging gc". graph_builder was added 6 years in a98801c1 when restoring the
-vmodule parameter after some temporary removal, without an explanation.
It seems safe to assume that the garbage collector has been debugged
sufficiently...
These defaults cause performance overhead:
- Enabling -vmodule slows down all log calls because checking verbosity
cannot take a simpler fast path.
- The amount of log output is much higher for those files.
The amount of log data also caused test output to get truncated, removing the
actual test failure explanation.
Previously it would corrupt the log when it ran stuff like:
go mod tidy >> "${LOG_FILE}" 2>&1
because this would reopen the file. Also, if that failed, the `finish`
function would be called ALSO with output to the log.
Now we let &1 and &2 always be the log, and &11 and &22 are the real
stdout/stderr, which means we have to say that explicitly when we want
output.
No, I cannot do `OUT="&11"` - I would have to use `eval` to make that
work.
podman returns nozero exit code for `docker buildx`, because
it misses a subcommand.
`docker buildx version` should work both in podman and docker. Tested both
with docker-ce-20.10.18 + docker-buildx-plugin-0.10.2 and podman-4.5.0 +
podman-docker.
In the installation script we use coreos/etcd path which redirect
to etcd-io/etcd. This commit replace the same.
Signed-off-by: Humble Chirammal <humble.devassy@gmail.com>
This PR updates changes related references to the legacy
release bucket, excluding CHANGELOG updates.
Signed-off-by: Ricky Sadowski <richard.j.sadowski@gmail.com>
- if binaries are already present skip building them
- install missing packages like nftables and kmod
- work better when cgroups v2 is present
- update to newer CNI version (v1.2.0)
- Ensure we wait for coredns to stabilize
- Grab docker log as well (this has containerd logs too)
Used tips from:
- https://kubernetes.io/docs/tasks/administer-cluster/dns-debugging-resolution/
Tested locally in an environment as close to CI as possible:
- https://gist.github.com/dims/3c83730c99f61e36b8dd2d61abe68fe7
Signed-off-by: Davanum Srinivas <davanum@gmail.com>
This involves moving the report files, but it allows me to delete the
indirect variable and indirect array code in update-codgen. As proud as
I was of figuring that out, I am also ashamed of myself for doing it.
This is my atonement.
Use the "subprojects" aspect of update-codegen to generat openapi for
the subprojects. Next we can simplify and remove the generic support.
apiextensions-apiserver seems like it was ALWAYS broken:
k8s.io/apiextensions/ doesn't exist, but k8s.io/apiextensions-apiserver
does.
Fixing that causes different openapi results, obviously.
Here's what others in our ecosystem are doing:
https://cs.k8s.io/?q=GINKGO_POLL_PROGRESS_(AFTER%7CINTERVAL)&i=nope&files=&excludeFiles=&repos=
the logs currently are too big partially because of this
incessant output from the progress thingy
When someone wants to debug something, they can use this
set of parameters to something lower to capture these
additional logs.
Signed-off-by: Davanum Srinivas <davanum@gmail.com>
k8s_tag_files_matching looks for a slash after its argument, so the current value doesnt match anything
also update codegen
this is required for apiextensions-apiserver tests. After fixing apiextensions server tests to use type-aware SSA (instead of erroneously using untyped SSA) there were errors since none of the apiextensions types were actually used in the openapi given to tests.
In strict mode, stylecheck complains about Convert_* and SetDefaults_*
functions in Kubernetes because they use underscores. We want to allow that to
make the functions more readable.
This moves the hack/ directory and scripts to the examples dir, which is
a distinct module. This avoids some Go unpleasantness around module
boundaries and just makes more sense.
When running this script more than once on Debian and Ubuntu, we fail to
chown -R the CERT_DIR due to this file owned by root and the CERT_DIR
owned by the unprivileged user running the script.
Let's remove the file, that is something we can always do, before
generating the certs. This fixes the problem on Debian and Ubuntu local
setups.
Signed-off-by: Rodrigo Campos <rodrigoca@microsoft.com>
This commit is the main API piece of KEP-3257 (ClusterTrustBundles).
This commit:
* Adds the certificates.k8s.io/v1alpha1 API group
* Adds the ClusterTrustBundle type.
* Registers the new type in kube-apiserver.
* Implements the type-specfic validation specified for
ClusterTrustBundles:
- spec.pemTrustAnchors must always be non-empty.
- spec.signerName must be either empty or a valid signer name.
- Changing spec.signerName is disallowed.
* Implements the "attest" admission check to restrict actions on
ClusterTrustBundles that include a signer name.
Because it wasn't specified in the KEP, I chose to make attempts to
update the signer name be validation errors, rather than silently
ignored.
I have tested this out by launching these changes in kind and
manipulating ClusterTrustBundle objects in the resulting cluster using
kubectl.
The apiextensions-apiserver itself only depends on the following runtime
libraries when linking dynamically:
```
> ldd _output/bin/apiextensions-apiserver
linux-vdso.so.1 (0x00007ffd1b39f000)
libpthread.so.0 => /nix/store/4nlgxhb09sdr51nc9hdm8az5b08vzkgx-glibc-2.35-163/lib/libpthread.so.0 (0x00007fe836022000)
libc.so.6 => /nix/store/4nlgxhb09sdr51nc9hdm8az5b08vzkgx-glibc-2.35-163/lib/libc.so.6 (0x00007fe835e00000)
/nix/store/4nlgxhb09sdr51nc9hdm8az5b08vzkgx-glibc-2.35-163/lib/ld-linux-x86-64.so.2 => /nix/store/4nlgxhb09sdr51nc9hdm8az5b08vzkgx-glibc-2.35-163/lib64/ld-linux-x86-64.so.2 (0x00007fe836029000)
```
We now move the apiextensions-apiserver to become a static binary as
well to achieve maximum portability.
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
If a CRI error occurs during the terminating phase after a pod is
force deleted (API or static) then the housekeeping loop will not
deliver updates to the pod worker which prevents the pod's state
machine from progressing. The pod will remain in the terminating
phase but no further attempts to terminate or cleanup will occur
until the kubelet is restarted.
The pod worker now maintains a store of the pods state that it is
attempting to reconcile and uses that to resync unknown pods when
SyncKnownPods() is invoked, so that failures in sync methods for
unknown pods no longer hang forever.
The pod worker's store tracks desired updates and the last update
applied on podSyncStatuses. Each goroutine now synchronizes to
acquire the next work item, context, and whether the pod can start.
This synchronization moves the pending update to the stored last
update, which will ensure third parties accessing pod worker state
don't see updates before the pod worker begins synchronizing them.
As a consequence, the update channel becomes a simple notifier
(struct{}) so that SyncKnownPods can coordinate with the pod worker
to create a synthetic pending update for unknown pods (i.e. no one
besides the pod worker has data about those pods). Otherwise the
pending update info would be hidden inside the channel.
In order to properly track pending updates, we have to be very
careful not to mix RunningPods (which are calculated from the
container runtime and are missing all spec info) and config-
sourced pods. Update the pod worker to avoid using ToAPIPod()
and instead require the pod worker to directly use
update.Options.Pod or update.Options.RunningPod for the
correct methods. Add a new SyncTerminatingRuntimePod to prevent
accidental invocations of runtime only pod data.
Finally, fix SyncKnownPods to replay the last valid update for
undesired pods which drives the pod state machine towards
termination, and alter HandlePodCleanups to:
- terminate runtime pods that aren't known to the pod worker
- launch admitted pods that aren't known to the pod worker
Any started pods receive a replay until they reach the finished
state, and then are removed from the pod worker. When a desired
pod is detected as not being in the worker, the usual cause is
that the pod was deleted and recreated with the same UID (almost
always a static pod since API UID reuse is statistically
unlikely). This simplifies the previous restartable pod support.
We are careful to filter for active pods (those not already
terminal or those which have been previously rejected by
admission). We also force a refresh of the runtime cache to
ensure we don't see an older version of the state.
Future changes will allow other components that need to view the
pod worker's actual state (not the desired state the podManager
represents) to retrieve that info from the pod worker.
Several bugs in pod lifecycle have been undetectable at runtime
because the kubelet does not clearly describe the number of pods
in use. To better report, add the following metrics:
kubelet_desired_pods: Pods the pod manager sees
kubelet_active_pods: "Admitted" pods that gate new pods
kubelet_mirror_pods: Mirror pods the kubelet is tracking
kubelet_working_pods: Breakdown of pods from the last sync in
each phase, orphaned state, and static or not
kubelet_restarted_pods_total: A counter for pods that saw a
CREATE before the previous pod with the same UID was finished
kubelet_orphaned_runtime_pods_total: A counter for pods detected
at runtime that were not known to the kubelet. Will be
populated at Kubelet startup and should never be incremented
after.
Add a metric check to our e2e tests that verifies the values are
captured correctly during a serial test, and then verify them in
detail in unit tests.
Adds 23 series to the kubelet /metrics endpoint.
Currently we only cleanup on exit. Let's trap SIGINT (ctrl-c) too, so we
always cleanup everything.
Otherwise if we ctrl-c is easy to leave something running, specially if
we ctrl-c while the cleanup function is running. And when we leave
something running and don't reused the certs ($REUSE_CERTS), that is the
default, something is left running and it fails with weird ways as we
can't auth with the new certs.
Signed-off-by: Rodrigo Campos <rodrigoca@microsoft.com>
https://github.com/kubernetes/kubernetes/pull/109728 added a
golangci-strict.yaml where gingkolinter and stylecheck (some recent additions
to golangci.yaml) were missing.
To prevent such mistakes in the future, lines that are intentionally different
get annotated with a comment about golangci-strict.yaml or golangci.yaml.
Then a suitable diff command in the new verify-golangci-lint-config.sh checks
that only such lines, comments and blank lines are different.
The long-term goal is that when "make verify" is invoked in pull job, it will
also run golangci-lint with the strict configuration and write an
$ARTIFACTS/golangci-lint-githubactions.log file with GitHub actions
annotations. How to get those published for the GitHub PR is open.
When "make verify" is invoked manually or in any other job, the stricter check
will be skipped. That works because "PR_NUMBER" is only set for pre-merge
jobs (https://github.com/kubernetes/test-infra/blob/master/prow/jobs.md#job-environment-variables).
Because strict linting is still new and might not be useful without a better
UI (= GitHub annotations), this PR does not fully enable the integration into
"make verify". Instead, the new verify-golangci-lint-pr.sh is excluded from it
and needs to be run in a separate job.
It is useful to check new code with a stricter configuration because we want it
to be of higher quality. Code reviews also become easier when reviewers don't
need to point out inefficient code manually.
What exactly should be enabled is up for debate. The current config uses the
golangci-lint defaults plus everything that is enabled explicitly by the normal
golangci.yaml, just to be on the safe side.
go list -find takes ~60% the time:
$ time go list -e ./... | grep -E -v "/(build|third_party|vendor|staging|clientset_generated|hack)/" | md5sum
b5593b3f51f3b3cd08c33bbff9627d10 -
real 0m2.687s
user 0m3.624s
sys 0m1.552s
$ time go list -find -e ./... | grep -E -v "/(build|third_party|vendor|staging|clientset_generated|hack)/" | md5sum
b5593b3f51f3b3cd08c33bbff9627d10 -
real 0m1.721s
user 0m1.675s
sys 0m1.197s
https://github.com/kubernetes/kubernetes/pull/116166#discussion_r1123924871
To run just a specific linter based on command line flags, the default
configuration needs to be disabled (because it would enable additional ones)
and then command line flags must be passed through to "golangci-lint run".
For example, to lint with just "go vet" in verbose mode, use:
verify-golangci-lint.sh -c none -- --disable-all --enable=govet -v
