Automatic merge from submit-queue (batch tested with PRs 41223, 40892, 41220, 41207, 41242)
Fixes#40819 and Fixes#33114
**What this PR does / why we need it**:
Start looking up the virtual machine by it's UUID in vSphere again. Looking up by IP address is problematic and can either not return a VM entirely, or could return the wrong VM.
Retrieves the VM's UUID in one of two methods - either by a `vm-uuid` entry in the cloud config file on the VM, or via sysfs. The sysfs route requires root access, but restores the previous functionality.
Multiple VMs in a vCenter cluster can share an IP address - for example, if you have multiple VM networks, but they're all isolated and use the same address range. Additionally, flannel network address ranges can overlap.
vSphere seems to have a limitation of reporting no more than 16 interfaces from a virtual machine, so it's possible that the IP address list on a VM is completely untrustworthy anyhow - it can either be empty (because the 16 interfaces it found were veth interfaces with no IP address), or it can report the flannel IP.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
Fixes#40819Fixes#33114
**Special notes for your reviewer**:
**Release note**:
```release-note
Reverts to looking up the current VM in vSphere using the machine's UUID, either obtained via sysfs or via the `vm-uuid` parameter in the cloud configuration file.
```
Start looking up the virtual machine by it's UUID in vSphere again. Looking up by IP address is problematic and can either not return a VM entirely, or could return the wrong VM.
Retrieves the VM's UUID in one of two methods - either by a `vm-uuid` entry in the cloud config file on the VM, or via sysfs. The sysfs route requires root access, but restores the previous functionality.
Multiple VMs in a vCenter cluster can share an IP address - for example, if you have multiple VM networks, but they're all isolated and use the same address range. Additionally, flannel network address ranges can overlap.
vSphere seems to have a limitation of reporting no more than 16 interfaces from a virtual machine, so it's possible that the IP address list on a VM is completely untrustworthy anyhow - it can either be empty (because the 16 interfaces it found were veth interfaces with no IP address), or it can report the flannel IP.
Automatic merge from submit-queue (batch tested with PRs 41037, 40118, 40959, 41084, 41092)
Fix for detach volume when node is not present/ powered off
Fixes#33061
When a vm is reported as no longer present in cloud provider and is deleted by node controller, there are no attempts to detach respective volumes. For example, if a VM is powered off or paused, and pods are migrated to other nodes. In the case of vSphere, the VM cannot be started again because the VM still holds mount points to volumes that are now mounted to other VMs.
In order to re-join this node again, you will have to manually detach these volumes from the powered off vm before starting it.
The current fix will make sure the mount points are deleted when the VM is powered off. Since all the mount points are deleted, the VM can be powered on again.
This is a workaround proposal only. I still don't see the kubernetes issuing a detach request to the vsphere cloud provider which should be the case. (Details in original issue #33061 )
@luomiao @kerneltime @pdhamdhere @jingxu97 @saad-ali
Automatic merge from submit-queue
Add OWNERS file for GCE cloud provider
GCE cloud provider does not have OWNERS file and all PRs need to be approved by owner of pkg/cloudprovider, which is currently only @mikedanese. Adding more options would be helpful to speed up reviews.
Feel free to add/remove some names, this first version is just my qualified guess. It's hard to distinguish generic Kubernetes refactoring from real cloud provider work in git log.
```release-note
NONE
```
addressed review comments
Addressed review comment for pv_reclaimpolicy.go to verify content of the volume
addressed 2nd round of review comments
addressed 3rd round of review comments from jeffvance
Automatic merge from submit-queue (batch tested with PRs 40638, 40742, 40710, 40718, 40763)
Reduce log noise when aws cloud cannot find public-ip4 metadata
**What this PR does / why we need it**:
The PR removes excessive log spam produced by the aws cloud provider for normal operating conditions.
**Which issue this PR fixes**
fixes https://github.com/kubernetes/kubernetes/issues/23155
**Special notes for your reviewer**:
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
Set NetworkInterfaces and Subnets to nil before updating Azure security groups
**What this PR does / why we need it**: This is a workaround until we have an upstream fix in azure-sdk-for-go/go-autorest. Corresponding issues are https://github.com/kubernetes/kubernetes/issues/40332 and https://github.com/Azure/go-autorest/issues/112
In k8s 1.5.2, an update to azure-sdk-for-go was cherry-picked, which broke creation/updating of LBs on Azure. As we should have it back to a working state ASAP, I'd like to do a workaround for now and later when the upstream fix comes in, remove the workaround again.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#40332
**Release note**:
```release-note
Fix failing load balancers in Azure
```
CC @colemickens
Automatic merge from submit-queue
genericapiserver: cut off more dependencies – episode 3
Compare commit subjects.
This is the first step to get `apiserver_test.go` and `watch_test.go` in `pkg/genericapiserver/endpoints` cutoff from k8s.io/kubernetes dependencies.
After this we have to sync client-go and then "episode 4" can go in.
approved based on #40363
Automatic merge from submit-queue
Adding vmdk file extension for vmDiskPath in vsphere DeleteVolume
**What this PR does / why we need it**:
This fix is required to handle situation when volume path is not set with vmdk file extension.
DiskAttach call does not require vmdk file extension to be explicitly set in the file path, so in PV yaml file, users have option to set such file path.
Issue happens when such PV is created with persistentVolumeReclaimPolicy set to Delete, and user deletes associated PVC. Volume deletion will fail with the message: file was not found
**Which issue this PR fixes** *
Fixes: #40560
**Special notes for your reviewer**:
Tested fix with custom image: divyen/hyperkube-fix-deletevolume:latest (Image built using base v1.5.3-beta.0)
@kerneltime @BaluDontu please review this fix.
Automatic merge from submit-queue
AWS: trust region if found from AWS metadata
```release-note
AWS: trust region if found from AWS metadata
```
Means we can run in newly announced regions without a code change.
We don't register the ECR provider in new regions, so we will still need
a code change for now.
Fix#35014
Automatic merge from submit-queue
Set custom PollingDelay of 5 seconds for Azure VirtualMachinesClient
The default polling delay of 1 minute results in very long delays when
an Azure Disk is attached to a node. It gets worse as go-autorest
doubles the default delay to 2 minutes.
Please see: https://github.com/kubernetes/kubernetes/issues/35180#issuecomment-273085063
Only the PollingDelay for VirtualMachinesClient is modified here to
avoid too much pressure on Azure quotas.
Release Nodes:
```release-note
Reduce time needed to attach Azure disks
```
Automatic merge from submit-queue
Prune reviewers from pkg/cloudprovider
**What this PR does / why we need it**
Per discussion in https://github.com/kubernetes/kubernetes/pull/36530 the `OWNERS` file for `pkg/cloudprovider` should not contain additional reviewers at this time.
**Special notes for your reviewer**:
Sorry for the extra work in review
**Release note**:
`NONE`
Automatic merge from submit-queue
Curating Owners: pkg/cloudprovider
cc @runseb @justinsb @kerneltime @mikedanese @svanharmelen @anguslees @brendandburns @abrarshivani @imkin @luomiao @colemickens @ngtuna @dagnello @abithap
In an effort to expand the existing pool of reviewers and establish a
two-tiered review process (first someone lgtms and then someone
experienced in the project approves), we are adding new reviewers to
existing owners files.
If You Care About the Process:
------------------------------
We did this by algorithmically figuring out who’s contributed code to
the project and in what directories. Unfortunately, that doesn’t work
well: people that have made mechanical code changes (e.g change the
copyright header across all directories) end up as reviewers in lots of
places.
Instead of using pure commit data, we generated an excessively large
list of reviewers and pruned based on all time commit data, recent
commit data and review data (number of PRs commented on).
At this point we have a decent list of reviewers, but it needs one last
pass for fine tuning.
Also, see https://github.com/kubernetes/contrib/issues/1389.
TLDR:
-----
As an owner of a sig/directory and a leader of the project, here’s what
we need from you:
1. Use PR https://github.com/kubernetes/kubernetes/pull/35715 as an example.
2. The pull-request is made editable, please edit the `OWNERS` file to
remove the names of people that shouldn't be reviewing code in the
future in the **reviewers** section. You probably do NOT need to modify
the **approvers** section. Names asre sorted by relevance, using some
secret statistics.
3. Notify me if you want some OWNERS file to be removed. Being an
approver or reviewer of a parent directory makes you a reviewer/approver
of the subdirectories too, so not all OWNERS files may be necessary.
4. Please use ALIAS if you want to use the same list of people over and
over again (don't hesitate to ask me for help, or use the pull-request
above as an example)
Automatic merge from submit-queue (batch tested with PRs 39625, 39842)
AWS: Remove duplicate calls to DescribeInstance during volume operations
This change removes all duplicate calls to describeInstance
from aws volume code path.
**What this PR does / why we need it**:
This PR removes the duplicate calls present in disk check code paths in AWS. I can confirm that `getAWSInstance` actually returns all instance information already and hence there is no need of making separate `describeInstance` call.
Related to - https://github.com/kubernetes/kubernetes/issues/39526
cc @justinsb @jsafrane
Means we can run in newly announced regions without a code change.
We don't register the ECR provider in new regions, so we will still need
a code change for now.
This also means we do trust config / instance metadata, and don't reject
incorrectly configured zones.
Fix#35014
The default polling delay of 1 minute results in very long delays when
an Azure Disk is attached to a node. It gets worse as go-autorest
doubles the default delay to 2 minutes.
Please see: https://github.com/kubernetes/kubernetes/issues/35180#issuecomment-273085063
Only the PollingDelay for VirtualMachinesClient is modified here to
avoid too much pressure on Azure quotas.
Automatic merge from submit-queue
AWS: Add exponential backoff to waitForAttachmentStatus() and createTags()
We should use exponential backoff while waiting for a volume to get attached/detached to/from a node. This will lower AWS load and reduce API call throttling.
This partly fixes#33088
@justinsb, can you please take a look?
Automatic merge from submit-queue
Changed default scsi controller type in vSphere Cloud Provider
This PR changes default scsi controller to ```pvscsi``` in vSphere Cloud Provider. Fixes#37527
Automatic merge from submit-queue (batch tested with PRs 38818, 38813, 38820)
AWS: Add sequential allocator for device names.
On AWS, we should not reuse device names as long as possible, see https://aws.amazon.com/premiumsupport/knowledge-center/ebs-stuck-attaching/
> "If you specify a device name that is not in use by EC2, but is being used by the block device driver within the EC2 instance, the attachment of the EBS volume does not succeed and the EBS volume is stuck in the attaching state."
This patch adds a device name allocator that tries to find a name that's next to the last used device name instead of using the first available one. This way we will loop through all device names ("xvdba" .. "xvdzz") before a device name is reused.
Fixes: #31891
@wongma7, @gnufied, @childsb PTAL
On AWS, we should not reuse device names as long as possible, see
https://aws.amazon.com/premiumsupport/knowledge-center/ebs-stuck-attaching/
"If you specify a device name that is not in use by EC2, but is being used by
the block device driver within the EC2 instance, the attachment of the EBS
volume does not succeed and the EBS volume is stuck in the attaching state."
This patch adds a device name allocator that tries to find a name that's next
to the last used device name instead of using the first available one.
This way we will loop through all device names ("xvdba" .. "xvdzz") before
a device name is reused.
We should use exponential backoff while waiting for a volume to get attached/
detached to/from a node. This will lower AWS load and reduce its API call
throttling.
