Automatic merge from submit-queue
Make the fake command factory return the clientset with appropriate rest clients for all the API groups.
Please review only the last commit here. This is based on PR #35865 which will be reviewed independently.
Design Doc: PR #34484
cc @kubernetes/sig-cluster-federation @nikhiljindal
Automatic merge from submit-queue
[Federation][init-08] Refactor the tests by pulling the common utilities into a testing package.
Please review only the last commit here. This is based on PR #35864 which will be reviewed independently.
Design Doc: PR #34484
cc @kubernetes/sig-cluster-federation @nikhiljindal
Automatic merge from submit-queue
Fix how we iterate over active jobs when removing them for Replace policy
When fixing the Replace Active removal I used wrong for loop construct which panics :/ This PR fixes that by using for range.
@janetkuo ptal
@jessfraz this will also be a cherry-pick candidate for 1.4, I remember we've picked the aforementioned fix as well
Automatic merge from submit-queue
CRI: Add devices to ContainerConfig
This PR adds devices to ContainerConfig and adds experimental GPU support.
cc/ @yujuhong @Hui-Zhi @vishh @kubernetes/sig-node
Automatic merge from submit-queue
add script to check for updates to the files for generation
Adds a verify script to help people writing APIs remember to wire all the individual pieces up. Eventually it will be better to avoid this altogether, but this is a start.
@ncdc fyi
Automatic merge from submit-queue
Remove non-generic options from genericapiserver.Config
Remove non-generic options from genericapiserver.Config. Changes the discovery CIDR/IP information to an interface and then demotes several fields.
I haven't pulled from them genericapiserver.Options, but that's a future option we have. Segregation as as a followup at the very least.
Automatic merge from submit-queue
Set reason and message on Pod during nodecontroller eviction
**What this PR does / why we need it**: Pods which are evicted by the nodecontroller due to network partition, or unresponsive kubelet should be differentiated from termination initiated by other sources. The reason/message are consumed by kubectl to provide a better summary using get/describe.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#35725
**Release note**:
```release-note
Pods that are terminating due to eviction by the nodecontroller (typically due to unresponsive kubelet, or network partition) now surface in `kubectl get` output
as being in state "Unknown", along with a longer description in `kubectl describe` output.
```
Automatic merge from submit-queue
kubectl: make edit work with lists again
@kubernetes/kubectl this is fixing https://github.com/kubernetes/kubernetes/issues/20519 and slightly changes the behavior of --recursive when the directory that is being edited has files with errors. Previously since `edit` was working on an object basis, bad objects would be skipped and the editor would load the next object. We want to load multiple objects in the same list and it's impossible to load invalid objects in a list so --recursive will not work if there is any error in the directory. I think this is an acceptable trade-off.
Review here: https://github.com/kubernetes/kubernetes/pull/36148/files?w=1
Automatic merge from submit-queue
Curating Owners: pkg/kubectl
In an effort to expand the existing pool of reviewers and establish a
two-tiered review process (first someone lgtms and then someone
experienced in the project approves), we are adding new reviewers to
existing owners files.
## If You Care About the Process:
We did this by algorithmically figuring out who’s contributed code to
the project and in what directories. Unfortunately, that doesn’t work
well: people that have made mechanical code changes (e.g change the
copyright header across all directories) end up as reviewers in lots of
places.
Instead of using pure commit data, we generated an excessively large
list of reviewers and pruned based on all time commit data, recent
commit data and review data (number of PRs commented on).
At this point we have a decent list of reviewers, but it needs one last
pass for fine tuning.
## TLDR:
As an owner of a sig/directory and a leader of the project, here’s what
we need from you:
1. Comment on the pull-request explaining the changes you want. I'll
take care of doing them (unless you want to modify the pull-request
yourself).
2. OWNERS files in subdirectory can be removed if they are redundant with
top-directory files.
3. Please use the ALIAS feature if you want to re-use a list of persons
in different files.
Automatic merge from submit-queue
Switch DisruptionBudget api from bool to int allowed disruptions [only v1beta1]
Continuation of #34546. Apparently it there is some bug that prevents us from having 2 different incompatibile version of API in integration tests. So in this PR v1alpha1 is removed until testing infrastructure is fixed.
Base PR comment:
Currently there is a single bool in disruption budget api that denotes whether 1 pod can be deleted or not. Every time a pod is deleted the apiserver filps the bool to false and the disruptionbudget controller sets it to true if more deletions are allowed. This works but it is far from optimal when the user wants to delete multiple pods (for example, by decreasing replicaset size from 10000 to 8000).
This PR adds a new api version v1beta1 and changes bool to int which contains a number of pods that can be deleted at once.
cc: @davidopp @mml @wojtek-t @fgrzadkowski @caesarxuchao
Pods which are evicted by the nodecontroller due to network
malfunction, or unresponsive kubelet should be differentiated
from termination initiated by other sources. The reason/message
are consumed by kubectl to provide a better summary using get/describe.
Automatic merge from submit-queue
always allow decoding of status when returned from the API
`unversioned.Status` should be able to come back from any API version and still be properly decoded. This doesn't happen today by default.
@smarterclayton Our projectrequest endpoint returns a `Status` object on a 200 return from list to indicate everything went well. This (or something like it) is needed to make the API accepted by `kubectl`. Alternatively, we change the API to return a different (still not a `Project`) value from list, which still feels wrong.
Automatic merge from submit-queue
Populate Node.Status.Addresses with Hostname
This PR is supposed to address #22063
Currently `NodeName` has to be a resolvable dns address on the master to allow apiserver -> kubelet communication (exec, log, port-forward operations on a pod). In some situations this is unfortunate (see the discussions on the issue).
The PR aims to do the following:
- Populate the `Type: Hostname` in the `Node.Status.Addresses` array, the type is already defined, but was not used so far.
- Add logic to resolve a Node's Hostname when the apiserver initiates communication with the Kubelet, instead of using the Nodename string as Hostname.
```release-note
The hostname of the node (as autodetected by the kubelet, specified via --hostname-override, or determined by the cloudprovider) is now recorded as an address of type "Hostname" in the status of the Node API object. The hostname is expected to be resolveable from the apiserver.
```
Automatic merge from submit-queue
promote /healthz and /metrics to genericapiserver
Promotes `/healthz` to genericapiserver with methods to add healthz checks before running.
Promotes `/metrics` to genericapiserver gated by config flag.
@lavalamp adds the healthz checks linked to `postStartHooks` as promised.
Automatic merge from submit-queue
clean up client version negotiation to handle no legacy API
Version negotiation fails if the legacy API endpoint isn't available.
This tightens up the negotiation interface based to more clearly express what each stage is doing and what the constraints on negotiation are. This is needed to speak to generic API servers.
@kubernetes/kubectl
Automatic merge from submit-queue
Don't rely on device name provided by Cinder
See issue #33128
We can't rely on the device name provided by Cinder, and thus must perform
detection based on the drive serial number (aka It's cinder ID) on the
kubelet itself.
This patch re-works the cinder volume attacher to ignore the supplied
deviceName, and instead defer to the pre-existing GetDevicePath method to
discover the device path based on it's serial number and /dev/disk/by-id
mapping.
This new behavior is controller by a config option, as falling back
to the cinder value when we can't discover a device would risk devices
not showing up, falling back to cinder's guess, and detecting the wrong
disk as attached.
Automatic merge from submit-queue
Add BindNetwork to genericapiserver Config
This is needed for downstream use:
`BindNetwork` is the type of network to bind to - defaults to "tcp4", accepts "tcp", "tcp4", and "tcp6".
Automatic merge from submit-queue
Corect filtering of OpenStack LBaaS resources to delete
Neutron's API ignores unknown parameters. When listing pools etc, K8
attempts to filter on "LoadBalancerID", which is not a valid filter.
As such, it is ignored by Neutron, and a list of all pools is
returned. K8 then proceeds to delete each of the pools.
Instead, we now double check the resources really belong to the LB
we're trying to delete.
Fixes issue #33759
Automatic merge from submit-queue
[Kubelet] Use the custom mounter script for Nfs and Glusterfs only
This patch reduces the scope for the containerized mounter to NFS and GlusterFS on GCE + GCI clusters
This patch also enabled the containerized mounter on GCI nodes
Shepherding multiple PRs through the submit queue is painful. Hence I combined them into this PR. Please review each commit individually.
cc @jingxu97 @saad-ali
https://github.com/kubernetes/kubernetes/pull/35652 has also been reverted as part of this PR
Automatic merge from submit-queue
pod and qos level cgroup support
```release-note
[Kubelet] Add alpha support for `--cgroups-per-qos` using the configured `--cgroup-driver`. Disabled by default.
```
Automatic merge from submit-queue
Avoid double decoding all client responses
Fixes#35982
The linked issue uncovered that we were always double decoding the response in restclient for get, list, update, create, and patch. That's fairly expensive, most especially for list. This PR refines the behavior of the rest client to avoid double decoding, and does so while minimizing the changes to rest client consumers.
restclient must be able to deal with multiple types of servers. Alter the behavior of restclient.Result#Raw() to not process the body on error, but instead to return the generic error (which still matches the error checking cases in api/error like IsBadRequest). If the caller uses
.Error(), .Into(), or .Get(), try decoding the body as a Status.
For older servers, continue to default apiVersion "v1" when calling restclient.Result#Error(). This was only for 1.1 servers and the extensions group, which we have since fixed.
This removes a double decode of very large objects (like LIST) - we were trying to DecodeInto status, but that ends up decoding the entire result and then throwing it away. This makes the decode behavior specific to the type of action the user wants.
```release-note
The error handling behavior of `pkg/client/restclient.Result` has changed. Calls to `Result.Raw()` will no longer parse the body, although they will still return errors that react to `pkg/api/errors.Is*()` as in previous releases. Callers of `Get()` and `Into()` will continue to receive errors that are parsed from the body if the kind and apiVersion of the body match the `Status` object.
This more closely aligns rest client as a generic RESTful client, while preserving the special Kube API extended error handling for the `Get` and `Into` methods (which most Kube clients use).
```
See issue #33128
We can't rely on the device name provided by Cinder, and thus must perform
detection based on the drive serial number (aka It's cinder ID) on the
kubelet itself.
This patch re-works the cinder volume attacher to ignore the supplied
deviceName, and instead defer to the pre-existing GetDevicePath method to
discover the device path based on it's serial number and /dev/disk/by-id
mapping.
This new behavior is controller by a config option, as falling back
to the cinder value when we can't discover a device would risk devices
not showing up, falling back to cinder's guess, and detecting the wrong
disk as attached.
Automatic merge from submit-queue
Making the pod.alpha.kubernetes.io/initialized annotation optional in PetSet pods
**What this PR does / why we need it**: As of now, the absence of the annotation `pod.alpha.kubernetes.io/initialized` in PetSets causes the PetSet controller to effectively "pause". Being a debug hook, users expect that its absence has no effect on the working of a PetSet. This PR inverts the logic so that we let the PetSet controller operate as expected in the absence of the annotation.
Letting the annotation remain alpha seems ok. Renaming it to something more meaningful needs further discussion.
**Which issue this PR fixes** _(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)_: fixes https://github.com/kubernetes/kubernetes/issues/35498
**Special notes for your reviewer**:
**Release note**:
``` release-note
The annotation "pod.alpha.kubernetes.io/initialized" on StatefulSets (formerly PetSets) is now optional and only encouraged for debug use.
```
cc @erictune @smarterclayton @bprashanth @kubernetes/sig-apps
@kow3ns The examples will need to be cleaned up as well I think later on to remove them.
Automatic merge from submit-queue
Fix build break on non-Linux OS introduced in 87aaf4c0
**What this PR does / why we need it**: simple fix for build breakage on non-Linux OS.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)*:
**Special notes for your reviewer**:
```console
+++ [1102 11:16:58] linux/amd64: go build started
+++ [1102 11:20:11] linux/amd64: go build finished
+++ [1102 11:16:58] darwin/amd64: go build started
# k8s.io/kubernetes/pkg/kubelet/dockershim/cm
pkg/kubelet/dockershim/cm/container_manager_unsupported.go:33: undefined: fmt in fmt.Errorf
+++ [1102 11:16:58] windows/amd64: go build started
# k8s.io/kubernetes/pkg/kubelet/dockershim/cm
pkg/kubelet/dockershim/cm/container_manager_unsupported.go:33: undefined: fmt in fmt.Errorf
Makefile:79: recipe for target 'all' failed
make[1]: *** [all] Error 1
Makefile:255: recipe for target 'cross' failed
make: *** [cross] Error 1
Makefile:239: recipe for target 'release' failed
make: *** [release] Error 1
```
**Release note**:
```release-note
NONE
```
