If node does not exist, node's volumes will be detached
automatically and become available. So mark them detached and
return false without error.
Fix#50266
Automatic merge from submit-queue
Initialize cloud providers with a K8s clientBuilder
**What this PR does / why we need it**:
This PR provides each cloud provider the ability to generate kubernetes clients. Either the full access or service account client builder is passed from the controller manager. Cloud providers could need to retrieve information from the cluster that isn't provided through defined interfaces, and this seems more preferable to adding parameters.
Please leave your thoughts/comments.
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
Filter out IPV6 addresses from NodeAddresses() returned by vSphere
The vSphere CP returns both IPV6 and IPV4 addresses for a Node as part of NodeAddresses() implementation. However, Kubelet fails due to duplicate api.NodeAddress value when the node has an IPV6 address associated with it. This issue is tracked in #42690. The following are observed:
- when we enabled the logs and checked the addresses sent by vSphere CP to Kubelet, we don't see any duplicate addresses at all.
- Also, kubelet_node_status doesn’t receive any duplicate address from cloud provider.
However, when we filter out the IPV6 addresses and only return IPV4 addresses to the Kubelet, it works perfectly fine.
Even though the Kubelet receives the non-duplicate node-addresses, it still errors out with duplicate node addresses. It might be an issue when kubelet propagates these addresses to API server (or) API server is enable to handle IPV6 addresses.
@divyenpatel @abrarshivani @pdhamdhere @tusharnt
**Release note**:
```release-note
None
```
Remove the dependency of login information on worker nodes for vsphere cloud provider:
1. VM Name is required to be set in the cloud provider configuration file.
2. Remove the requirement of login for Instance functions when querying local node information.
The cloudprovider is being refactored out of kubernetes core. This is being
done by moving all the cloud-specific calls from kube-apiserver, kubelet and
kube-controller-manager into a separately maintained binary(by vendors) called
cloud-controller-manager. The Kubelet relies on the cloudprovider to detect information
about the node that it is running on. Some of the cloudproviders worked by
querying local information to obtain this information. In the new world of things,
local information cannot be relied on, since cloud-controller-manager will not
run on every node. Only one active instance of it will be run in the cluster.
Today, all calls to the cloudprovider are based on the nodename. Nodenames are
unqiue within the kubernetes cluster, but generally not unique within the cloud.
This model of addressing nodes by nodename will not work in the future because
local services cannot be queried to uniquely identify a node in the cloud. Therefore,
I propose that we perform all cloudprovider calls based on ProviderID. This ID is
a unique identifier for identifying a node on an external database (such as
the instanceID in aws cloud).
Automatic merge from submit-queue
Fix adding disks to more than one scsi adapter. Fixes#42399
**What this PR does / why we need it**: Allows a single node to use more than 16 disks.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes#42399
**Special notes for your reviewer**:
**Release note**:
```release-note
Fix adding disks to more than one scsi adapter.
```
Automatic merge from submit-queue
Remove VCenterPort from vsphere cloud provider.
**What this PR does / why we need it**:
Address a bug inside vsphere cloud provider when a port number other than 443 is specified inside the config file.
The url which is used for communicating with govmomi should not include port number.
A port number other than 443 will result in 404 error.
VCenterPort stays in VSphereConfig structure for backward compatibility.
**Which issue this PR fixes** : fixes https://github.com/kubernetes/kubernetes-anywhere/issues/338
The url which is used for communicating with govmomi should not include
port number. A port number other than 443 will result in 404 error.
VCenterPort stays in VSphereConfig structure for backward compatibility.
Automatic merge from submit-queue (batch tested with PRs 41223, 40892, 41220, 41207, 41242)
Fixes#40819 and Fixes#33114
**What this PR does / why we need it**:
Start looking up the virtual machine by it's UUID in vSphere again. Looking up by IP address is problematic and can either not return a VM entirely, or could return the wrong VM.
Retrieves the VM's UUID in one of two methods - either by a `vm-uuid` entry in the cloud config file on the VM, or via sysfs. The sysfs route requires root access, but restores the previous functionality.
Multiple VMs in a vCenter cluster can share an IP address - for example, if you have multiple VM networks, but they're all isolated and use the same address range. Additionally, flannel network address ranges can overlap.
vSphere seems to have a limitation of reporting no more than 16 interfaces from a virtual machine, so it's possible that the IP address list on a VM is completely untrustworthy anyhow - it can either be empty (because the 16 interfaces it found were veth interfaces with no IP address), or it can report the flannel IP.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
Fixes#40819Fixes#33114
**Special notes for your reviewer**:
**Release note**:
```release-note
Reverts to looking up the current VM in vSphere using the machine's UUID, either obtained via sysfs or via the `vm-uuid` parameter in the cloud configuration file.
```
Start looking up the virtual machine by it's UUID in vSphere again. Looking up by IP address is problematic and can either not return a VM entirely, or could return the wrong VM.
Retrieves the VM's UUID in one of two methods - either by a `vm-uuid` entry in the cloud config file on the VM, or via sysfs. The sysfs route requires root access, but restores the previous functionality.
Multiple VMs in a vCenter cluster can share an IP address - for example, if you have multiple VM networks, but they're all isolated and use the same address range. Additionally, flannel network address ranges can overlap.
vSphere seems to have a limitation of reporting no more than 16 interfaces from a virtual machine, so it's possible that the IP address list on a VM is completely untrustworthy anyhow - it can either be empty (because the 16 interfaces it found were veth interfaces with no IP address), or it can report the flannel IP.
Automatic merge from submit-queue
Changed default scsi controller type in vSphere Cloud Provider
This PR changes default scsi controller to ```pvscsi``` in vSphere Cloud Provider. Fixes#37527
Automatic merge from submit-queue
Bad conditional in vSphereLogin function
```release-note
Fixes NotAuthenticated errors that appear in the kubelet and kube-controller-manager due to never logging in to vSphere
```
With this conditional being == instead of !=, a login would never actually be attempted by this provider, and disk attachments would fail with a NotAuthenticated error from vSphere.
This method has been unused by k8s for some time, and yet is the last
piece of the cloud provider API that encourages provider names to be
human-friendly strings (this method applies a regex to instance names).
Actually removing this deprecated method is part of a long effort to
migrate from instance names to instance IDs in at least the OpenStack
provider plugin.
Automatic merge from submit-queue (batch tested with PRs 36543, 38189, 38289, 38291, 36724)
context.Context should be the first parameter of a function in vsphere
**What this PR does / why we need it**:
Change the position of the context.Context parameter.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
golint
**Release note**:
```release-note
```
Signed-off-by: yupeng <yu.peng36@zte.com.cn>
Check for error conditions from the vSphere API and return the err if one occurs. The vSphere API does not return an err for unauthenticated users, it just returns a nil user object.
At master volume reconciler, the information about which volumes are
attached to nodes is cached in actual state of world. However, this
information might be out of date in case that node is terminated (volume
is detached automatically). In this situation, reconciler assume volume
is still attached and will not issue attach operation when node comes
back. Pods created on those nodes will fail to mount.
This PR adds the logic to periodically sync up the truth for attached volumes kept in the actual state cache. If the volume is no longer attached to the node, the actual state will be updated to reflect the truth. In turn, reconciler will take actions if needed.
To avoid issuing many concurrent operations on cloud provider, this PR
tries to add batch operation to check whether a list of volumes are
attached to the node instead of one request per volume.
More details are explained in PR #33760
Automatic merge from submit-queue
vSphere cloud provider: re-use session for vCenter logins
This change allows for the re-use of a vCenter client session. Addresses #34491
