Automatic merge from submit-queue
Increase timeout for Stackdriver Logging e2e tests
They're failing in CI, because Stackdriver Logging's List method is too slow for this purpose. Quick fix, should be gone completely when reading is implemented properly
/cc @piosz
Automatic merge from submit-queue
e2e tests for VSAN policy support in Kubernetes for vSphere
Following e2e test cases have been implemented for VSAN policy support in Kubernetes for vSphere. These e2e tests are for PR #42974 which out for review.
A total of 8 test cases for below mentioned 5 different scenarios are implemented.
Test cases:
1. Validation of VSAN capabilities.
- hostFailuresToTolerate : Minimum 1 and Max 3. Should be integer.
- stripeWidth: Minimum is 1 and Maximum is 12. Should be integer.
- proportionalCapacity: Expressed in percentage. Should be between 0 and 100. Should be integer.
- iopsLimit: Should be greater than 0. Should be integer.
2. Use a VSAN testbed setup. Try valid VSAN capabilities which are supported by VSAN testbed. Make sure the disk is created with policy configured with it.
- Ex: Using hostFailuresToTolerate=0 and cacheReservation=12
Ex: diskStripes=1 and objectSpaceReservation=30
3. Use a VSAN testbed setup. Try valid VSAN capabilities which are not supported by VSAN testbed. Make sure that the disk creation fails and PVC status is pending.
4. Try using VSAN capabilities on a non-VSAN datastore. PVC status will be pending and it errors to the user saying to VSAN capabilities are not supported on a non-VSAN testbed.
5. Try all 1 to 5 with custom datastore specified by the user.
@jeffvance @divyenpatel
**Release note**:
```release-note
None
```
Automatic merge from submit-queue (batch tested with PRs 43395, 44960)
e2e-node: refactor lifecycle test to avoid selinux issues
Fixes#42905
Previously, the exec hook tests mounted a HostPath volume from /tmp and touched a file as a indicator that the hook had run. This is prohibited by selinux policy on Fedora/RHEL/Centos.
This PR refactors the test to avoid filesystem indication and use the same indication that the HTTP hooks use; a GET to a http endpoint. The exec hooks run `curl` to hit this endpoint and trigger the indication. This simplifies this test quite a bit as well, removing over 85 lines of code.
REVIEWER NOTE: The diff is a mess on this one. Probably better to just review the new version of the file.
@derekwaynecarr
Explicitly specifying `--insecure` is required on insecure clusters,
which started being enforced in a very recent release. In 2 weeks
we'll have a stable image version that we can reliably pin the
relevant statefulset yaml file to in order to avoid stupid failures
like this. I'm really sorry for the flakes!
Automatic merge from submit-queue
Cleanup: replace some hardcoded vars and remove unused functions
Replace some hardcoded vars and remove unused functions
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 42477, 44462)
Use storage.v1 instead of v1beta1
storage.v1beta1 was used to work around GKE which did not expose v1. Now that GKE is updated, we can switch everything to v1.
This is simple sed v1beta1 -> v1 + enabled a new test + changed preference of exposed interfaces in `storage/install/install.go`.
@msau42, PTAL and let me know when GKE is updated with storage v1 API and this PR can be actually merged.
@kubernetes/sig-storage-pr-reviews
```release-note
NONE
```
Automatic merge from submit-queue
Move remain ESIPP tests to the slow suite
Continue PR of #38149.
It moves the remain ESIPP tests to the slow suite to help capture breaking changes.
/assign @thockin @freehan
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue
Stop treating in-cluster-config namespace as an override
Fixes#44835
The namespace of an in-cluster config should behave like the namespace specified in a kubeconfig file... it should be used as the default namespace, but be able to be overridden by namespaces specified in yaml files passed to `kubectl create -f`.
```release-note
Restored the ability of kubectl running inside a pod to consume resource files specifying a different namespace than the one the pod is running in.
```
The docker image is nowhere to be found, so lets remove it.
There have been a request for the Dockerfile here [1], but nobody
seems to care.
redis-proxy is replaced with redis-master in test-cmd-util.sh, to
ensure that the tests still works.
The redis-proxy pod in test/fixtures/doc-yaml/user-guide/multi-pod.yaml
is replaced with valid-pod from test/fixtures/doc-yaml/admin/limitrange/valid-pod.yaml,
so redis-proxy is removed every where.
[1] https://github.com/kubernetes/kubernetes/issues/4914#issuecomment-77209779
Automatic merge from submit-queue
Scheduler configurator looks for a specific key in ConfigMap.Data
**What this PR does / why we need it**: Changes scheduler configurator to look for a specific key in ConfigMap.Data instead of the old logic which expected only one entry to exist in the map. The key is a constant whose value is "policy.cfg".
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #
**Special notes for your reviewer**:
**Release note**:
```release-note
```
Automatic merge from submit-queue
Explicit namespace from kubeconfig should override in-cluster config
Fixes#43662
If an explicitly specified namespace is read from a kubeconfig file, we should not fall back to in-cluster config
```release-note
kubectl commands run inside a pod using a kubeconfig file now use the namespace specified in the kubeconfig file, instead of using the pod namespace. If no kubeconfig file is used, or the kubeconfig does not specify a namespace, the pod namespace is still used as a fallback.
```
Automatic merge from submit-queue
Add TestEtcdStoragePath integration test
**What this PR does / why we need it**:
`TestEtcdStoragePath` prevents the accidental movement of objects stored in etcd. It creates a stub of each object and then checks the expected location in etcd. Inadvertent `GroupVersionKind` changes are prevented.
cc @liggitt @soltysh for review.
cc @ncdc because I know you love this 😄
Signed-off-by: Monis Khan <mkhan@redhat.com>
**Release note**:
```
NONE
```
Automatic merge from submit-queue
Mark Stackdriver Logging e2e tests with a feature
Makes Stackdriver Logging e2e tests, except for the most basic one, run in the separate tests suites, prepared by https://github.com/kubernetes/test-infra/pull/2542
Automatic merge from submit-queue
De-Flake Volume E2E: force GCEPD detach to prevent timeout
**What this PR does / why we need it**:
Fix flake`[k8s.io] Volumes [Volume] [k8s.io] PD should be mountable [Flaky] 5m38s.
Flake occurs as a result of an automated detach taking longer than 5 minutes, which exceeds the timeout limit of the delete function.
This PR adds explicit detach and wait func calls before the deletion. By forcing the detach and giving GCE an appropriate timeout limit, this should squash the timeout flake. This also significantly shortens cleanup time.
This PR does not remove the [Flaky] tag. Once this PR is merged, I'll keep an eye on the test grid for ~1 week. If no flakes surface, I'll submit a PR to pull the tag off.
**Which issue this PR fixes** *(optional, in `fixes #<issue number>(, fixes #<issue_number>, ...)` format, will close that issue when PR gets merged)*: fixes #43977
**Release note**:
```release-note
NONE
```
Automatic merge from submit-queue (batch tested with PRs 42177, 42176, 44721)
Job: Respect ControllerRef
**What this PR does / why we need it**:
This is part of the completion of the [ControllerRef](https://github.com/kubernetes/community/blob/master/contributors/design-proposals/controller-ref.md) proposal. It brings Job into full compliance with ControllerRef. See the individual commit messages for details.
**Which issue this PR fixes**:
This ensures that Job does not fight with other controllers over control of Pods.
Ref: #24433
**Special notes for your reviewer**:
**Release note**:
```release-note
Job controller now respects ControllerRef to avoid fighting over Pods.
```
cc @erictune @kubernetes/sig-apps-pr-reviews
Automatic merge from submit-queue (batch tested with PRs 42177, 42176, 44721)
CronJob: Respect ControllerRef
**What this PR does / why we need it**:
This is part of the completion of the [ControllerRef](https://github.com/kubernetes/community/blob/master/contributors/design-proposals/controller-ref.md) proposal. It brings CronJob into compliance with ControllerRef. See the individual commit messages for details.
**Which issue this PR fixes**:
This ensures that other controllers do not fight over control of objects that a CronJob owns.
**Special notes for your reviewer**:
**Release note**:
```release-note
CronJob controller now respects ControllerRef to avoid fighting with other controllers.
```
cc @erictune @kubernetes/sig-apps-pr-reviews
