This makes the "destination" policy model clearer. All external
destination captures now jump to the "XLB chain, which is the main place
that masquerade is done (removing it from most other places).
This is simpler to trace - XLB *always* exists (as long as you have an
external exposure) and never gets bypassed.
No functional changes, much whitespace.
Make assertIPTablesRulesEqual() *not* sort the `expected` value - make
the test cases all be pre-sorted. This will make followup commits
cleaner.
Make the test output cleaner when this fails.
Use dedent everywhere for easier reading.
Fix internal and external traffic policy to be handled separately (so
that, in particular, services with Local internal traffic policy and
Cluster external traffic policy do not behave as though they had Local
external traffic policy as well.
Additionally, traffic to an `internalTrafficPolicy: Local` service on
a node with no endpoints is now dropped rather than being rejected
(which, as in the external case, may prevent traffic from being lost
when endpoints are in flux).
Now the XLB chain _only_ implements the "short-circuit local
connections to the SVC chain" rule, and the actual endpoint selection
happens in the SVL chain.
Though not quite implemented yet, this will eventually also mean that
"SVC" = "Service, Cluster traffic policy" as opposed to "SVL" =
"Service, Local traffic policy"
Rather than lazily computing and then caching the endpoint chain name
because we don't have the right information at construct time, just
pass the right information at construct time and compute the chain
name then.
All of the tests used a localDetector that considered the pod IP range
to be 10.0.0.0/24, but lots of the tests used pod IPs in 10.180.0.0/16
or 10.0.1.0/24, meaning the generated iptables rules were somewhat
inconsistent. Fix this by expanding the localDetector's pod IP range
to 10.0.0.0/8. (Changing the pod IPs to all be in 10.0.0.0/24 instead
would be a much larger change since it would result in the SEP chain
names changing.)
Meanwhile, the different tests were also horribly inconsistent about
what values they used for other IPs, and some of them even used the
same IPs (or ports) for different things in the same test case. Fix
these all up and create a consistent set of IP assignments:
// Pod IPs: 10.0.0.0/8
// Service ClusterIPs: 172.30.0.0/16
// Node IPs: 192.168.0.0/24
// Local Node IP: 192.168.0.2
// Service ExternalIPs: 192.168.99.0/24
// LoadBalancer IPs: 1.2.3.4, 5.6.7.8, 9.10.11.12
// Non-cluster IPs: 203.0.113.0/24
// LB Source Range: 203.0.113.0/25
Only run assertIPTablesRuleJumps() on the expected output, not on the
actual output, since if there's a problem with the actual output, we'd
rather see it as the diff from the expected output.
When nodePortAddresses is not specified for kube-proxy, it tried to open
the node port for a NodePort service twice, triggered by IPv4ZeroCIDR
and IPv6ZeroCIDR separately. The first attempt would succeed and the
second one would always generate an error log like below:
"listen tcp4 :30522: bind: address already in use"
This patch fixes it by ensuring nodeAddresses of a proxier only contain
the addresses for its IP family.
The same code appeared twice, once for the SVC chain and once for the
XLB chain, with the only difference being that the XLB version had
more verbose comments.
If you pass just an IP address to "-s" or "-d", the iptables command
will fill in the correct mask automatically.
Originally, the proxier was just hardcoding "/32" for all of these,
which was unnecessary but simple. But when IPv6 support was added, the
code was made more complicated to deal with the fact that the "/32"
needed to be "/128" in the IPv6 case, so it would parse the IPs to
figure out which family they were, which in turn involved adding some
checks in case the parsing fails (even though that "can't happen" and
the old code didn't check for invalid IPs, even though that would
break the iptables-restore if there had been any).
Anyway, all of that is unnecessary because we can just pass the IP
strings to iptables directly rather than parsing and unparsing them
first.
(The diff to proxier_test.go is just deleting "/32" everywhere.)
The logic to detect stale endpoints was not assuming the endpoint
readiness.
We can have stale entries on UDP services for 2 reasons:
- an endpoint was receiving traffic and is removed or replaced
- a service was receiving traffic but not forwarding it, and starts
to forward it.
Add an e2e test to cover the regression
Filter the allEndpoints list into readyEndpoints sooner, and set
"hasEndpoints" based (mostly) on readyEndpoints, not allEndpoints (so
that, eg, we correctly generate REJECT rules for services with no
_functioning_ endpoints, even if they have unusable terminating
endpoints).
Also, write out the endpoint chains at the top of the loop when we
iterate the endpoints for the first time, rather than copying some of
the data to another set of variables and then writing them out later.
And don't write out endpoint chains that won't be used
Also, generate affinity rules only for readyEndpoints rather than
allEndpoints, so affinity gets broken correctly when an endpoint
becomes unready.
The external traffic policy terminating endpoints test was testing
LoadBalancer functionality against a NodePort service with no
nodePorts (or loadBalancer IPs). It managed to test what it wanted to
test, but it's kind of dubious (and we probably _shouldn't_ have been
generating the rules it was looking for since there was no way to
actually reach the XLB chains). So fix that.
Also make the terminating endpoints test use session affinity, to add
more testing for that. Also, remove the multiple copies of the same
identical Service that is used for all of the test cases in that test.
Also add a "Cluster traffic policy and no source ranges" test to
TestOverallIPTablesRulesWithMultipleServices since we weren't really
testing either of those.
Also add a test of --masquerade-all.
The test got broken to not actually use "no cluster CIDR" when
LocalDetector was implemented (and the old version of the unit test
didn't check enough to actually notice this).
The original tests here were very shy about looking at the iptables
output, and just relied on checks like "make sure there's a jump to
table X that also includes string Y somewhere in it" and stuff like
that. Whereas the newer tests were just like, "eh, here's a wall of
text, make sure the iptables output is exactly that". Although the
latter looks messier in the code, it's more precise, and it's easier
to update correctly when you change the rules. So just make all of the
tests do a check on the full iptables output.
(Note that I didn't double-check any of the output; I'm just assuming
that the output of the current iptables proxy code is actually
correct...)
Also, don't hardcode the expected number of rules in the metrics
tests, so that there's one less thing to adjust when rules change.
Also, use t.Run() in one place to get more precise errors on failure.
The test was sorting the iptables output so as to not depend on the
order that services get processed in, but this meant it wasn't
checking the relative ordering of rules (and in fact, the ordering of
the rules in the "expected" string was wrong, in a way that would
break things if the rules had actually been generated in that order).
Add a more complicated sorting function that sorts services
alphabetically while preserving the ordering of rules within each
service.
Because the proxy.Provider interface included
proxyconfig.EndpointsHandler, all the backends needed to
implement its methods. But iptables, ipvs, and winkernel implemented
them as no-ops, and metaproxier had an implementation that wouldn't
actually work (because it couldn't handle Services with no active
Endpoints).
Since Endpoints processing in kube-proxy is deprecated (and can't be
re-enabled unless you're using a backend that doesn't support
EndpointSlice), remove proxyconfig.EndpointsHandler from the
definition of proxy.Provider and drop all the useless implementations.
The nat KUBE-SERVICES chain is called from OUTPUT and PREROUTING stages. In
clusters with large number of services, the nat-KUBE-SERVICES chain is the largest
chain with for eg: 33k rules. This patch aims to move the KubeMarkMasq rules from
the kubeServicesChain into the respective KUBE-SVC-* chains. This way during each
packet-rule matching we won't have to traverse the MASQ rules of all services which
get accumulated in the KUBE-SERVICES and/or KUBE-NODEPORTS chains. Since the
jump to KUBE-MARK-MASQ ultimately sets the 0x400 mark for nodeIP SNAT, it should not
matter whether the jump is made from KUBE-SERVICES or KUBE-SVC-* chains.
Specifically we change:
1) For ClusterIP svc, we move the KUBE-MARK-MASQ jump rule from KUBE-SERVICES
chain into KUBE-SVC-* chain.
2) For ExternalIP svc, we move the KUBE-MARK-MASQ jump rule in the case of
non-ServiceExternalTrafficPolicyTypeLocal from KUBE-SERVICES
chain into KUBE-SVC-* chain.
3) For NodePorts svc, we move the KUBE-MARK-MASQ jump rule in case of
non-ServiceExternalTrafficPolicyTypeLocal from KUBE-NODEPORTS chain to
KUBE-SVC-* chain.
4) For load-balancer svc, we don't change anything since it is already svc specific
due to creation of KUBE-FW-* chains per svc.
This would cut the rules per svc in KUBE-SERVICES and KUBE-NODEPORTS in half.
1. Add API definitions;
2. Add feature gate and drops the field when feature gate is not on;
3. Set default values for the field;
4. Add API Validation
5. add kube-proxy iptables and ipvs implementations
6. add tests
