In the following code pattern, the log message will get logged with v=0 in JSON
output although conceptually it has a higher verbosity:
if klog.V(5).Enabled() {
klog.Info("hello world")
}
Having the actual verbosity in the JSON output is relevant, for example for
filtering out only the important info messages. The solution is to use
klog.V(5).Info or something similar.
Whether the outer if is necessary at all depends on how complex the parameters
are. The return value of klog.V can be captured in a variable and be used
multiple times to avoid the overhead for that function call and to avoid
repeating the verbosity level.
This promotes the LogarithmicScaleDown feature gate to Beta, enabling it
by default. It also introduces a new metric, `sorting_deletion_age_ratio`,
intended to measure the efficacy of this new replica set scaledown behavior.
Instead of listing all ReplicaSets in the namespace and checking their
controller UID, this patch adds a controllerUID index to the ReplicaSet
store and use it to get ReplicaSets with same controller, which reduces
the cost from O(#ReplicaSets) to O(1).
Benchmark results:
```
name old time/op new time/op delta
GetReplicaSetsWithSameController-48 18.2µs ± 9% 0.4µs ± 5% -97.64% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
GetReplicaSetsWithSameController-48 4.18kB ± 0% 0.05kB ± 0% -98.85% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
GetReplicaSetsWithSameController-48 15.0 ± 0% 2.0 ± 0% -86.67% (p=0.008 n=5+5)
```
Instead of reporting an event or displaying an error, simply exit
when the namespace is being terminated. This reduces the amount of
controller churn on namespace shutdown. While we could technically
exit the entire processing loop early for very large replica sets,
we should wait for more evidence that is an issue before changing
that logic substantially.
When scaling down a ReplicaSet, delete doubled up replicas first, where a
"doubled up replica" is defined as one that is on the same node as an
active replica belonging to a related ReplicaSet. ReplicaSets are
considered "related" if they have a common controller (typically a
Deployment).
The intention of this change is to make a rolling update of a Deployment
scale down the old ReplicaSet as it scales up the new ReplicaSet by
deleting pods from the old ReplicaSet that are colocated with ready pods of
the new ReplicaSet. This change in the behavior of rolling updates can be
combined with pod affinity rules to preserve the locality of a Deployment's
pods over rollout.
A specific scenario that benefits from this change is when a Deployment's
pods are exposed by a Service that has type "LoadBalancer" and external
traffic policy "Local". In this scenario, the load balancer uses health
checks to determine whether it should forward traffic for the Service to a
particular node. If the node has no local endpoints for the Service, the
health check will fail for that node. Eventually, the load balancer will
stop forwarding traffic to that node. In the meantime, the service proxy
drops traffic for that Service. Thus, in order to reduce risk of dropping
traffic during a rolling update, it is desirable preserve node locality of
endpoints.
* pkg/controller/controller_utils.go (ActivePodsWithRanks): New type to
sort pods using a given ranking.
* pkg/controller/controller_utils_test.go (TestSortingActivePodsWithRanks):
New test for ActivePodsWithRanks.
* pkg/controller/replicaset/replica_set.go
(getReplicaSetsWithSameController): New method. Given a ReplicaSet, return
all ReplicaSets that have the same owner.
(manageReplicas): Call getIndirectlyRelatedPods, and pass its result to
getPodsToDelete.
(getIndirectlyRelatedPods): New method. Given a ReplicaSet, return all
pods that are owned by any ReplicaSet with the same owner.
(getPodsToDelete): Add an argument for related pods. Use related pods and
the new getPodsRankedByRelatedPodsOnSameNode function to take into account
whether a pod is doubled up when sorting pods for deletion.
(getPodsRankedByRelatedPodsOnSameNode): New function. Return an
ActivePodsWithRanks value that wraps the given slice of pods and computes
ranks where each pod's rank is equal to the number of active related pods
that are colocated on the same node.
* pkg/controller/replicaset/replica_set_test.go (newReplicaSet): Set
OwnerReferences on the ReplicaSet.
(newPod): Set a unique UID on the pod.
(byName): New type to sort pods by name.
(TestGetReplicaSetsWithSameController): New test for
getReplicaSetsWithSameController.
(TestRelatedPodsLookup): New test for getIndirectlyRelatedPods.
(TestGetPodsToDelete): Augment the "various pod phases and conditions, diff
= len(pods)" test case to ensure that scale-down still selects doubled-up
pods if there are not enough other pods to scale down. Add a "various pod
phases and conditions, diff = len(pods), relatedPods empty" test case to
verify that getPodsToDelete works even if related pods could not be
determined. Add a "ready and colocated with another ready pod vs not
colocated, diff < len(pods)" test case to verify that a doubled-up pod gets
preferred for deletion. Augment the "various pod phases and conditions,
diff < len(pods)" test case to ensure that not-ready pods are preferred
over ready but doubled-up pods.
* pkg/controller/replicaset/BUILD: Regenerate.
* test/e2e/apps/deployment.go
(testRollingUpdateDeploymentWithLocalTrafficLoadBalancer): New end-to-end
test. Create a deployment with a rolling update strategy and affinity
rules and a load balancer with "Local" external traffic policy, and verify
that set of nodes with local endponts for the service remains unchanged
during rollouts.
(setAffinity): New helper, used by
testRollingUpdateDeploymentWithLocalTrafficLoadBalancer.
* test/e2e/framework/service/jig.go (GetEndpointNodes): Factor building the
set of node names out...
(GetEndpointNodeNames): ...into this new method.
- Move from the old github.com/golang/glog to k8s.io/klog
- klog as explicit InitFlags() so we add them as necessary
- we update the other repositories that we vendor that made a similar
change from glog to klog
* github.com/kubernetes/repo-infra
* k8s.io/gengo/
* k8s.io/kube-openapi/
* github.com/google/cadvisor
- Entirely remove all references to glog
- Fix some tests by explicit InitFlags in their init() methods
Change-Id: I92db545ff36fcec83afe98f550c9e630098b3135
Automatic merge from submit-queue (batch tested with PRs 54773, 52523, 47497, 55356, 49429). If you want to cherry-pick this change to another branch, please follow the instructions <a href="https://github.com/kubernetes/community/blob/master/contributors/devel/cherry-picks.md">here</a>.
Deduplicate RC/RS controller code.
The code was already 99% similar between RC and RS. This is a wild idea to try to deduplicate the two controllers in a type-safe manner without adding tons of boilerplate, and without using code generation.
They are still separate resources and separate worker pools. This is a refactor that isn't intended to change any behavior.
```release-note
ReplicationController now shares its underlying controller implementation with ReplicaSet to reduce the maintenance burden going forward. However, they are still separate resources and there should be no externally visible effects from this change.
```
ref #49429
The code was already 99% similar between RC and RS.
This is a wild idea to try to deduplicate the two controllers
in a type-safe manner without adding tons of boilerplate,
and without using code generation.
They are still separate resources. This is a refactor that isn't
intended to change any behavior.
Prevent too-large replicas from generating enormous numbers
of events by creating only a few pods at a time, then increasing
the batch size when pod creations succeed. Stop creating batches
of pods when any pod creation errors are encountered.
Automatic merge from submit-queue (batch tested with PRs 48976, 49474, 40050, 49426, 49430)
Remove duplicated import and wrong alias name of api package
**What this PR does / why we need it**:
**Which issue this PR fixes**: fixes#48975
**Special notes for your reviewer**:
/assign @caesarxuchao
**Release note**:
```release-note
NONE
```
We were comparing the address of the old and new RC.spec.replicas and we
have to compare the values. This only affects logging.
Update RS controller to match RC controller to log when spec.replicas
changes, not status.replicas.
