First try to clean only the mapping. This operation does not require any
rollback, so even if flushing collision fails, core object is still
intact. In case of error we inform user that core was not removed by
returning new error code (-OCF_ERR_CORE_NOT_REMOVED).
After flushing collision succeeds we remove core from metadata and
flush superblock at the end. At that point the core is fully removed
from OCF and even if superblock flush error occurs there is nothing we
can do about it, so we just return the error code.
Signed-off-by: Robert Baldyga <robert.baldyga@intel.com>
This function must be fixed to work with metadata flapping. Until then
mark as not supported
Signed-off-by: Adam Rutkowski <adam.j.rutkowski@intel.com>
Signed-off-by: Krzysztof Majzerowicz-Jaszcz <krzysztof.majzerowicz-jaszcz@intel.com>
Superblock can be used during load of other sections, so we need to check
its CRC before other sections are loaded.
Signed-off-by: Robert Baldyga <robert.baldyga@intel.com>
Signed-off-by: Krzysztof Majzerowicz-Jaszcz <krzysztof.majzerowicz-jaszcz@intel.com>
So far the only resource protected by backfill queue blocking was internal
OCF request queue. Move unblock to backfill io completion to protect also
queue of underlying cache device.
Signed-off-by: Robert Baldyga <robert.baldyga@intel.com>
Cleaning policy initializaton initializes metadata for all cache lines
anyway, so this step is not needed.
Signed-off-by: Robert Baldyga <robert.baldyga@intel.com>
Introduce utility that allows to parallelize management operation across
all available io queues.
Signed-off-by: Robert Baldyga <robert.baldyga@intel.com>
This prevents using up pool of seq numbers in normal mode and blocking
addition of any new cores.
Signed-off-by: Robert Baldyga <robert.baldyga@intel.com>
The purpose of this change is not to write superblock to the cache
drive untill all other sections are initilized on disk in attach()
path. Combined with superblock clearing at the erarlier stage of
attach(), this assures there are no residual mappings in the collision
section in case of power failure during attach with pre-existing
metadata.
This is implemented by removing ocf_metadata_flush_all_set_status() step
at the beginning of ocf_metadata_flush_all().
ocf_metadata_flush_all() is called, except for the attach() case described
above, in two cases:
1. at the end of cache load - potentially after cache recovery
2. during detaching cache drive in cache stop.
To make sure there are no regressions in the first case, an explicit
_ocf_mngt_attach_shutdown_status() is added to load pipeline before
ocf_metadata_flush_all(). The second case is always ran after cache
drive is attached, so dirty status bit must have already be written to
the disk.
Signed-off-by: Adam Rutkowski <adam.j.rutkowski@intel.com>
