This allows to avoid allocating cleaner metadata section and effectively
save up to 20% of metadata memory footprint.
Signed-off-by: Robert Baldyga <robert.baldyga@intel.com>
Fix error code for superblock checksum mismatch.
Superblock validation now returns a proper error on checksum check fail.
Signed-off-by: Krzysztof Majzerowicz-Jaszcz <krzysztof.majzerowicz-jaszcz@intel.com>
This function must be fixed to work with metadata flapping. Until then
mark as not supported
Signed-off-by: Adam Rutkowski <adam.j.rutkowski@intel.com>
Signed-off-by: Krzysztof Majzerowicz-Jaszcz <krzysztof.majzerowicz-jaszcz@intel.com>
Superblock can be used during load of other sections, so we need to check
its CRC before other sections are loaded.
Signed-off-by: Robert Baldyga <robert.baldyga@intel.com>
Signed-off-by: Krzysztof Majzerowicz-Jaszcz <krzysztof.majzerowicz-jaszcz@intel.com>
The purpose of this change is not to write superblock to the cache
drive untill all other sections are initilized on disk in attach()
path. Combined with superblock clearing at the erarlier stage of
attach(), this assures there are no residual mappings in the collision
section in case of power failure during attach with pre-existing
metadata.
This is implemented by removing ocf_metadata_flush_all_set_status() step
at the beginning of ocf_metadata_flush_all().
ocf_metadata_flush_all() is called, except for the attach() case described
above, in two cases:
1. at the end of cache load - potentially after cache recovery
2. during detaching cache drive in cache stop.
To make sure there are no regressions in the first case, an explicit
_ocf_mngt_attach_shutdown_status() is added to load pipeline before
ocf_metadata_flush_all(). The second case is always ran after cache
drive is attached, so dirty status bit must have already be written to
the disk.
Signed-off-by: Adam Rutkowski <adam.j.rutkowski@intel.com>
Because of metadata flapping it is much more complicated to capture those
sections in flight in standby mode, so we read them directly from the cache
volume during the activate.
Signed-off-by: Robert Baldyga <robert.baldyga@intel.com>
This feature provides double buffering of config sections to prevent
situation when power failure during metadata flush leads to partially
updated metadata. Flapping mechanism makes it always possible to perform
graceful rollback to previous config metadata content in such situation.
Signed-off-by: Robert Baldyga <robert.baldyga@intel.com>
To allow the fastest switching from the passive-standby to active mode, the
runtime metadata must be kept 100% synced with the metadata on the drive and in
the RAM thus recovery is required after each collision section update.
To avoid long-lasting recovering of all the cachelines each time the collision
section is being updated, the passive update procedure recovers only those
which have its MD entries on the updated pages.
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
GCC 11 static check finds an array size mismatch and prevents OCF from
compiling correctly. This fixes OpenCAS Linux issue #968
Signed-off-by: Krzysztof Majzerowicz-Jaszcz <krzysztof.majzerowicz-jaszcz@intel.com>
