Extend BVT tests to cover WO cache mode

Signed-off-by: Adam Rutkowski <adam.j.rutkowski@intel.com>

test/smoke_test/basic/12

@@ -6,8 +6,7 @@
 
 # The line below specified that line under it should be used as the test's short description when launching test via run_tests script.
 # The text should not be longer than 80 chars - if it is, the script will strip addititonal characters
-# DESCRIPTION WriteBack mode test: Test files on core devices with different filesystems after flushing and stopping cache
+# DESCRIPTION WB data integrity ext3/ext4/xfs after clean shutdown, no flush
-#             with 'don't flush dirty data on exit' option.
 
 # USE_IN_NIGHTLY
 # USE_IN_BVT
@@ -18,6 +17,8 @@ TESTS_DIR="$(dirname $0)/../"
 . $TESTS_DIR/cas_lib
 start_test $*
 
+CACHE_MODE="wb"
+
 # This is where the real test starts
 
 # Use CACHE_DEVICE and CORE_DEVICE provided by configuration file and remove partitions from those devices
@@ -30,15 +31,15 @@ TARGET_DEVICE_OPTION="$CACHE_DEVICE" PARTITION_SIZE_OPTION="2000M" PARTITION_IDS
 TARGET_DEVICE_OPTION="$CORE_DEVICE" PARTITION_SIZE_OPTION="4000M" PARTITION_IDS_OPTION="1 2 3" make_primary_partitions
 
 # Start cache on CACHE_DEVICE1 (/dev/sdd1, for example) with ID=1 and add a core device using CORE_DEVICE1 (/dev/sde1, for example)
-CACHE_ID_OPTION="1" CACHE_DEVICE_OPTION="${CACHE_DEVICE}1" CACHE_FORCE_OPTION="1" CACHE_MODE_OPTION="wb" start_cache
+CACHE_ID_OPTION="1" CACHE_DEVICE_OPTION="${CACHE_DEVICE}1" CACHE_FORCE_OPTION="1" CACHE_MODE_OPTION=$CACHE_MODE start_cache
 CACHE_ID_OPTION="1" CORE_DEVICE_OPTION="${CORE_DEVICE}1" add_core
 
 # Start cache on CACHE_DEVICE2 (/dev/sdd2, for example) with ID=2 and add a core device using CORE_DEVICE2 (/dev/sde2, for example)
-CACHE_ID_OPTION="2" CACHE_DEVICE_OPTION="${CACHE_DEVICE}2" CACHE_FORCE_OPTION="1" CACHE_MODE_OPTION="wb" start_cache
+CACHE_ID_OPTION="2" CACHE_DEVICE_OPTION="${CACHE_DEVICE}2" CACHE_FORCE_OPTION="1" CACHE_MODE_OPTION=$CACHE_MODE start_cache
 CACHE_ID_OPTION="2" CORE_DEVICE_OPTION="${CORE_DEVICE}2" add_core
 
 # Start cache on CACHE_DEVICE3 (/dev/sdd3, for example) with ID=3 and add a core device using CORE_DEVICE3 (/dev/sde3, for example)
-CACHE_ID_OPTION="3" CACHE_DEVICE_OPTION="${CACHE_DEVICE}3" CACHE_FORCE_OPTION="1" CACHE_MODE_OPTION="wb" start_cache
+CACHE_ID_OPTION="3" CACHE_DEVICE_OPTION="${CACHE_DEVICE}3" CACHE_FORCE_OPTION="1" CACHE_MODE_OPTION=$CACHE_MODE start_cache
 CACHE_ID_OPTION="3" CORE_DEVICE_OPTION="${CORE_DEVICE}3" add_core
 
 # Create filesystems on cached devices - we do this using run_cmd because it is not in the API (and probably won't be).

test/smoke_test/basic/13

@@ -0,0 +1,86 @@
+#!/bin/bash
+#
+# Copyright(c) 2012-2019 Intel Corporation
+# SPDX-License-Identifier: BSD-3-Clause-Clear
+#
+
+# The line below specified that line under it should be used as the test's short description when launching test via run_tests script.
+# The text should not be longer than 80 chars - if it is, the script will strip addititonal characters
+# DESCRIPTION WO data integrity ext3/ext4/xfs after clean shutdown, no flush
+
+# USE_IN_NIGHTLY
+# USE_IN_BVT
+# Standard beginning for every test - get the main tests directory and
+# link the cas_lib file for CAS API, then use "start_test $*" to pass params
+# and do other necessary checks and setup
+TESTS_DIR="$(dirname $0)/../"
+. $TESTS_DIR/cas_lib
+start_test $*
+
+CACHE_MODE="wo"
+
+# This is where the real test starts
+
+# Use CACHE_DEVICE and CORE_DEVICE provided by configuration file and remove partitions from those devices
+TARGET_DEVICE_OPTION="$CACHE_DEVICE" remove_partitions
+TARGET_DEVICE_OPTION="$CORE_DEVICE" remove_partitions
+
+# Create 3 primary partitions on CACHE_DEVICE, each of 2000M size
+TARGET_DEVICE_OPTION="$CACHE_DEVICE" PARTITION_SIZE_OPTION="2000M" PARTITION_IDS_OPTION="1 2 3" make_primary_partitions
+# Create 3 primary partitions on CORE_DEVICE, each of 4000M size
+TARGET_DEVICE_OPTION="$CORE_DEVICE" PARTITION_SIZE_OPTION="4000M" PARTITION_IDS_OPTION="1 2 3" make_primary_partitions
+
+# Start cache on CACHE_DEVICE1 (/dev/sdd1, for example) with ID=1 and add a core device using CORE_DEVICE1 (/dev/sde1, for example)
+CACHE_ID_OPTION="1" CACHE_DEVICE_OPTION="${CACHE_DEVICE}1" CACHE_FORCE_OPTION="1" CACHE_MODE_OPTION=$CACHE_MODE start_cache
+CACHE_ID_OPTION="1" CORE_DEVICE_OPTION="${CORE_DEVICE}1" add_core
+
+# Start cache on CACHE_DEVICE2 (/dev/sdd2, for example) with ID=2 and add a core device using CORE_DEVICE2 (/dev/sde2, for example)
+CACHE_ID_OPTION="2" CACHE_DEVICE_OPTION="${CACHE_DEVICE}2" CACHE_FORCE_OPTION="1" CACHE_MODE_OPTION=$CACHE_MODE start_cache
+CACHE_ID_OPTION="2" CORE_DEVICE_OPTION="${CORE_DEVICE}2" add_core
+
+# Start cache on CACHE_DEVICE3 (/dev/sdd3, for example) with ID=3 and add a core device using CORE_DEVICE3 (/dev/sde3, for example)
+CACHE_ID_OPTION="3" CACHE_DEVICE_OPTION="${CACHE_DEVICE}3" CACHE_FORCE_OPTION="1" CACHE_MODE_OPTION=$CACHE_MODE start_cache
+CACHE_ID_OPTION="3" CORE_DEVICE_OPTION="${CORE_DEVICE}3" add_core
+
+# Create filesystems on cached devices - we do this using run_cmd because it is not in the API (and probably won't be).
+# The test framework will accept invoking the commands directly (e.g. "mkfs.ext3 [...]" without the "run_cmd"), but the
+# results have to be checked manually by the test.
+TARGET_DEVICE_OPTION="${DEVICE_NAME}1-1" FILESYSTEM_TYPE="ext3" make_filesystem
+TARGET_DEVICE_OPTION="${DEVICE_NAME}2-1" FILESYSTEM_TYPE="ext4" make_filesystem
+TARGET_DEVICE_OPTION="${DEVICE_NAME}3-1" FILESYSTEM_TYPE="xfs" make_filesystem
+
+# Specify a temporary file used for md5sums - note that it resides in $TMP_DIR, which is a special directory defined in cas_config.
+# Everytime we use temporary files, they should be placed in that special directory. Its contents are cleared after every test.
+MD5_FILE="$TMP_DIR/cas_md5_sum_"
+
+# Mount the filesystems, then create the example files and save their MD5 sums locally in the temporary place
+# Note the usage of ${MOUNTPOINT} - mount_cache always mounts using following formula: ${MOUNTPOINT}-${CACHE_ID_OPTION}-${CORE_ID_OPTION}.
+for ID in 1 2 3 ; do
+    CACHE_ID_OPTION="$ID" CORE_ID_OPTION="1" mount_cache
+    run_cmd "dd if=/dev/urandom of=${MOUNTPOINT}-${ID}-1/test bs=50M count=1"
+    run_cmd "md5sum ${MOUNTPOINT}-${ID}-1/test > ${MD5_FILE}_${ID}"
+done
+
+# Umount & stop the caches, then mount the core devices
+# Note the usage of ${MOUNTPOINT} - mount_cache always mounts using following formula: ${MOUNTPOINT}-${CACHE_ID_OPTION}-${CORE_ID_OPTION}.
+for ID in 1 2 3 ; do
+    run_cmd "umount ${MOUNTPOINT}-${ID}-1"
+    CACHE_ID_OPTION="$ID" flush_cache
+    CACHE_ID_OPTION="$ID" CACHE_DONT_FLUSH_DATA_OPTION="1" stop_cache
+    run_cmd dd if=/dev/zero of="${CACHE_DEVICE}${ID}" bs=1M count=1 oflag=direct
+    run_cmd "mount ${CORE_DEVICE}${ID} ${MOUNTPOINT}-${ID}-1"
+done
+
+# Now check for files' presence and umount core devices
+# Note the usage of ${MOUNTPOINT} - mount_cache always mounts using following formula: ${MOUNTPOINT}-${CACHE_ID_OPTION}-${CORE_ID_OPTION}.
+for ID in 1 2 3 ; do
+    run_cmd "test -f ${MOUNTPOINT}-${ID}-1/test"
+    run_cmd "md5sum -c ${MD5_FILE}_${ID}"
+    run_cmd "umount ${MOUNTPOINT}-${ID}-1"
+done
+
+# Always return 0 at the end of the test - if at any point something has failed
+# in the API functions, test will end and return a proper result.
+# If you need to check other things during the test and end the test earlier, you
+# should end the test using "end_test $retval" function
+end_test 0

test/smoke_test/cas_functions

@@ -359,7 +359,7 @@ iteration() {
     fi
     if [ -n "$CACHE_MODE_OPTION" ] ; then
         if [ "$CACHE_MODE_OPTION" == "all" ] ; then
-            L_CACHE_MODE_OPTION="wa wb wt pt"
+            L_CACHE_MODE_OPTION="wa wb wt pt wo"
         else
             L_CACHE_MODE_OPTION="$CACHE_MODE_OPTION"
         fi