Added framework for smoke tests and few basic tests.

Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>

test/smoke_test/basic/05

@@ -0,0 +1,50 @@
+#!/bin/bash
+#
+# Copyright(c) 2012-2019 Intel Corporation
+# SPDX-License-Identifier: BSD-3-Clause-Clear
+#
+
+# The line below specified that line under it should be used as the test's short description when launching test via run_tests script.
+# The text should not be longer than 80 chars - if it is, the script will strip addititonal characters
+# DESCRIPTION Setup CAS with valid and invalid IDs
+
+# USE_IN_NIGHTLY
+
+# Standard beginning for every test - get the main tests directory and
+# link the cas_lib file for CAS API, then use "start_test $*" to pass params
+# and do other necessary checks and setup
+TESTS_DIR="$(dirname $0)/../"
+. $TESTS_DIR/cas_lib
+start_test $*
+
+# This is where the real test starts
+
+# Specify "arrays" of IDs used in test
+POSITIVE_IDS="1 9238 16384"
+NEGATIVE_IDS="-1 abc 16385"
+
+# Use CACHE_DEVICE provided by configuration file and remove partitions from this device
+TARGET_DEVICE_OPTION="$CACHE_DEVICE" remove_partitions
+# Create 1 primary partition on CACHE_DEVICE of 2000M size
+TARGET_DEVICE_OPTION="$CACHE_DEVICE" PARTITION_SIZE_OPTION="2000M" PARTITION_IDS_OPTION="1" make_primary_partitions
+
+# Try to start positive caches in loop and later stop them - if any of those operations fails, it
+# means the cache ID is invalid
+for ID in $POSITIVE_IDS ; do
+    CACHE_ID_OPTION="$ID" CACHE_DEVICE_OPTION="${CACHE_DEVICE}1" start_cache
+    CACHE_ID_OPTION="$ID" stop_cache
+done
+
+# Try to start negative caches in loop - if any of those operations succeeds, it
+# means the cache ID is valid (and it shouldn't be). Note that we can't provide an empty
+# ID, because the framework will treat it as an undefined option and will fail the test
+# automatically.
+for ID in $NEGATIVE_IDS ; do
+    NEGATIVE_TEST_OPTION="1" CACHE_ID_OPTION="$ID" CACHE_DEVICE_OPTION="${CACHE_DEVICE}1" start_cache
+done
+
+# Always return 0 at the end of the test - if at any point something has failed
+# in the API functions, test will end and return a proper result.
+# If you need to check other things during the test and end the test earlier, you
+# should end the test using "end_test $retval" function
+end_test 0