open-cas-linux/test/smoke_test/cache_suspend/03

#!/bin/bash
#
# Copyright(c) 2012-2019 Intel Corporation
# SPDX-License-Identifier: BSD-3-Clause-Clear
#

# The line below specified that line under it should be used as the test's short description when launching test via run_tests script.
# The text should not be longer than 80 chars - if it is, the script will strip addititonal characters
# DESCRIPTION Verify cache and core read and write stats in WT in PT mode

# The line below says that this test should be included in BVT - it will be launched, when we use "./run_tests -b"
# USE_IN_NIGHTLY

# Standard beginning for every test - get the main tests directory and
# link the cas_lib file for CAS API, then use "start_test $*" to pass params
# and do other necessary checks and setup.
TESTS_DIR="$(dirname $0)/../"
. $TESTS_DIR/cas_lib
start_test $*

CACHE_DEVICE_SIZE=1G
CORE_DEVICE_SIZE=10G
TEST_DEVICE=${DEVICE_NAME}1-1
TEST_BS=4k
TEST_COUNT=32768
TEST_COUNT_HALF=16384

#param device
get_stat_sectors_read() {
    L_DEVICE=$(basename $1)
    L_STAT=$(cat /proc/diskstats | grep $L_DEVICE | awk '{ print $6 }')
    echo $L_STAT
}

#param device
get_stat_sectors_written() {
    L_DEVICE=$(basename $1)
    L_STAT=$(cat /proc/diskstats | grep $L_DEVICE | awk '{ print $10 }')
    echo $L_STAT
}

cache_suspend_init() {
    # Use CACHE_DEVICE and CORE_DEVICE provided by configuration file and remove partitions from those devices
    TARGET_DEVICE_OPTION="$CACHE_DEVICE" remove_partitions
    TARGET_DEVICE_OPTION="$CORE_DEVICE" remove_partitions

    # Create 1 primary partitions on CACHE_DEVICE
    TARGET_DEVICE_OPTION="$CACHE_DEVICE" PARTITION_SIZE_OPTION=$CACHE_DEVICE_SIZE PARTITION_IDS_OPTION="1" make_primary_partitions

    # Create 1 primary partitions on CORE_DEVICE
    TARGET_DEVICE_OPTION="$CORE_DEVICE" PARTITION_SIZE_OPTION=$CORE_DEVICE_SIZE PARTITION_IDS_OPTION="1" make_primary_partitions

    run_cmd dd if=/dev/zero of="${CORE_DEVICE}1" bs=1M count=1 oflag=direct

    # Start cache on CACHE_DEVICE1
    CACHE_ID_OPTION="1" CACHE_DEVICE_OPTION="${CACHE_DEVICE}1" start_cache

    # Add a core device using CORE_DEVICE1
    CACHE_ID_OPTION="1" CORE_DEVICE_OPTION="${CORE_DEVICE}1" add_core
}

cache_suspend_deinit() {
    # Remove the core device from cache
    CACHE_ID_OPTION="1" CORE_ID_OPTION="1" remove_core

    # Clean up after the test
    CACHE_ID_OPTION="1" stop_cache
}

cache_suspend_test() {
    local L_CACHE_READS_BEFORE=
    local L_CACHE_READS_AFTER=
    local L_CACHE_WRITES_BEFORE=
    local L_CACHE_WRITES_AFTER=
    local L_CORE_READS_BEFORE=
    local L_CORE_READS_AFTER=
    local L_CACHE_READS=
    local L_CORE_READS=
    local L_SIZE_WRITTEN=
    local L_SIZE_READ=

    test_log_trace "Block size is ${TEST_BS}"
    test_log_trace "Count is ${TEST_COUNT}"

    # Write
    test_log_trace "Write into CAS ${TEST_COUNT}"
    dd if=/dev/urandom of=${TEST_DEVICE} bs=${TEST_BS} count=${TEST_COUNT} oflag=direct
    # Sync
    sync && echo 3 > /proc/sys/vm/drop_caches

    # Suspend the cache
    test_log_trace "Suspend Cache"
    CACHE_ID_OPTION="1" CACHE_MODE_OPTION="pt" set_cache_mode

    # Write
    test_log_trace "Overwrite half ${TEST_COUNT_HALF}"
    dd if=/dev/urandom of=${TEST_DEVICE} bs=${TEST_BS} count=${TEST_COUNT_HALF} oflag=direct
    # Sync
    sync && echo 3 > /proc/sys/vm/drop_caches

    # Resume the cache
    test_log_trace "Resume Cache"
    CACHE_ID_OPTION="1" CACHE_MODE_OPTION="wt" set_cache_mode

    # Get statistics before
    L_CACHE_READS_BEFORE=$(get_stat_sectors_read ${CACHE_DEVICE}1)
    L_CORE_READS_BEFORE=$(get_stat_sectors_read ${CORE_DEVICE}1)

    # Read from
    test_log_trace "Read from CAS"
    dd if=${TEST_DEVICE} of=/dev/null bs=${TEST_BS} count=${TEST_COUNT} iflag=direct
    # Sync
    sync && echo 3 > /proc/sys/vm/drop_caches

    # Get statistics after
    L_CACHE_READS_AFTER=$(get_stat_sectors_read ${CACHE_DEVICE}1)
    L_CORE_READS_AFTER=$(get_stat_sectors_read ${CORE_DEVICE}1)

    test_log_trace "Cache reads before : $L_CACHE_READS_BEFORE"
    test_log_trace "Cache reads after  : $L_CACHE_READS_AFTER"

    test_log_trace "Core reads before : $L_CORE_READS_BEFORE"
    test_log_trace "Core reads after  : $L_CORE_READS_AFTER"

    let L_CACHE_READS=${L_CACHE_READS_AFTER}-${L_CACHE_READS_BEFORE}
    test_log_trace "Cache reads : ${L_CACHE_READS}"

    let L_CORE_READS=${L_CORE_READS_AFTER}-${L_CORE_READS_BEFORE}
    test_log_trace "Core reads : ${L_CORE_READS}"

    let L_SIZE_WRITTEN=$(get_bytes $TEST_BS)*$(get_bytes $TEST_COUNT)
    test_log_trace "Size written : $L_SIZE_WRITTEN"

    let L_SIZE_READ=${L_CORE_READS}+${L_CACHE_READS}
    let L_SIZE_READ=${L_SIZE_READ}*512
    test_log_trace "Size read : $L_SIZE_READ"

    if [ "$L_SIZE_READ" != "$L_SIZE_WRITTEN" ]
    then
        test_log_trace "Mismatch between written size and read size"
        return 1
    fi

    return 0
}

#
# START TEST
#

test_log_start

run_cmd cache_suspend_init

run_cmd cache_suspend_test

run_cmd cache_suspend_deinit

test_log_stop

#
# END TEST
#

# Always return 0 at the end of the test - if at any point something has failed
# in the API functions, test will end and return a proper result.
# If you need to check other things during the test and end the test earlier, you
# should end the test using "end_test $retval" function
end_test 0