75 lines
3.8 KiB
Bash
Executable File
75 lines
3.8 KiB
Bash
Executable File
#!/bin/bash
|
|
#
|
|
# Copyright(c) 2012-2020 Intel Corporation
|
|
# SPDX-License-Identifier: BSD-3-Clause-Clear
|
|
#
|
|
|
|
# The line below specified that line under it should be used as the test's short description when launching test via run_tests script.
|
|
# The text should not be longer than 80 chars - if it is, the script will strip addititonal characters
|
|
# DESCRIPTION Try add 3 cores to pool, try load cache and check if cache is running
|
|
|
|
# The line below says that this test should be included in BVT - it will be launched, when we use "./run_tests -b"
|
|
# USE_IN_BVT
|
|
# USE_IN_NIGHTLY
|
|
|
|
# Standard beginning for every test - get the main tests directory and
|
|
# link the cas_lib file for CAS API, then use "start_test $*" to pass params
|
|
# and do other necessary checks and setup
|
|
TESTS_DIR="$(dirname $0)/../"
|
|
. $TESTS_DIR/cas_lib
|
|
start_test $*
|
|
|
|
# This is where the real test starts
|
|
|
|
# Use CACHE_DEVICE and CORE_DEVICE provided by configuration file and remove partitions from those devices
|
|
TARGET_DEVICE_OPTION="$CACHE_DEVICE" remove_partitions
|
|
TARGET_DEVICE_OPTION="$CORE_DEVICE" remove_partitions
|
|
|
|
# Create primary partition 2000M size on CACHE_DEVICE
|
|
TARGET_DEVICE_OPTION="$CACHE_DEVICE" PARTITION_SIZE_OPTION="2000M" PARTITION_IDS_OPTION="1" make_primary_partitions
|
|
# Create primary partition 4000M size on CORE_DEVICE
|
|
TARGET_DEVICE_OPTION="$CORE_DEVICE" PARTITION_SIZE_OPTION="4000M" PARTITION_IDS_OPTION="1 2 3" make_primary_partitions
|
|
|
|
# Prepare cache on CACHE_DEVICE1 (/dev/sdd1, e.g.) and add core device using CORE_DEVICE1, CORE_DEVICE2 and CORE_DEVICE3 (/dev/sde1, /dev/sde2, /dev/sde3, e.g)
|
|
CACHE_ID_OPTION="1" CACHE_DEVICE_OPTION="${CACHE_DEVICE}-part1" start_cache
|
|
CACHE_ID_OPTION="1" CORE_DEVICE_OPTION="${CORE_DEVICE}-part1" add_core
|
|
CACHE_ID_OPTION="1" CORE_DEVICE_OPTION="${CORE_DEVICE}-part2" add_core
|
|
CACHE_ID_OPTION="1" CORE_DEVICE_OPTION="${CORE_DEVICE}-part3" add_core
|
|
|
|
DEVICE_ID_OPTION="${CACHE_DEVICE}-part1" DEMANDED_STATE_OPTION="Running" check_device_state
|
|
DEVICE_ID_OPTION="${DEVICE_NAME}1-1" DEMANDED_STATE_OPTION="Active" check_device_state
|
|
DEVICE_ID_OPTION="${DEVICE_NAME}1-2" DEMANDED_STATE_OPTION="Active" check_device_state
|
|
DEVICE_ID_OPTION="${DEVICE_NAME}1-3" DEMANDED_STATE_OPTION="Active" check_device_state
|
|
|
|
# Stop prepared setup
|
|
CACHE_ID_OPTION="1" stop_cache
|
|
|
|
# Add cores to pool, then load cache and check if cache is running
|
|
# Try to add core devices and check their states
|
|
CACHE_ID_OPTION="1" CORE_DEVICE_OPTION="${CORE_DEVICE}-part1" CORE_ID_OPTION="1" try_add_core
|
|
DEVICE_ID_OPTION="${CORE_DEVICE}-part1" DEMANDED_STATE_OPTION="Detached" check_device_state
|
|
|
|
CACHE_ID_OPTION="1" CORE_DEVICE_OPTION="${CORE_DEVICE}-part2" CORE_ID_OPTION="2" try_add_core
|
|
DEVICE_ID_OPTION="${CORE_DEVICE}-part2" DEMANDED_STATE_OPTION="Detached" check_device_state
|
|
|
|
CACHE_ID_OPTION="1" CORE_DEVICE_OPTION="${CORE_DEVICE}-part3" CORE_ID_OPTION="3" try_add_core
|
|
DEVICE_ID_OPTION="${CORE_DEVICE}-part3" DEMANDED_STATE_OPTION="Detached" check_device_state
|
|
|
|
|
|
# Try to load cache device, check if it is running and if all cores status is appropirate
|
|
CACHE_ID_OPTION="1" CACHE_DEVICE_OPTION="${CACHE_DEVICE}-part1" CACHE_LOAD_METADATA_OPTION="y" start_cache
|
|
DEVICE_ID_OPTION="${CACHE_DEVICE}-part1" DEMANDED_STATE_OPTION="Running" check_device_state
|
|
DEVICE_ID_OPTION="${DEVICE_NAME}1-1" DEMANDED_STATE_OPTION="Active" check_device_state
|
|
DEVICE_ID_OPTION="${DEVICE_NAME}1-2" DEMANDED_STATE_OPTION="Active" check_device_state
|
|
DEVICE_ID_OPTION="${DEVICE_NAME}1-3" DEMANDED_STATE_OPTION="Active" check_device_state
|
|
|
|
|
|
# Stop prepared setup
|
|
CACHE_ID_OPTION="1" stop_cache
|
|
|
|
# Always return 0 at the end of the test - if at any point something has failed
|
|
# in the API functions, test will end and return a proper result.
|
|
# If you need to check other things during the test and end the test earlier, you
|
|
# should end the test using "end_test $retval" function
|
|
end_test 0
|