aarch64: Enable UEFI image loading

Implemented an architecture specific function for loading UEFI binary.

Changed the logic of loading kernel image:
1. First try to load the image as kernel in PE format;
2. If failed, try again to load it as formatless UEFI binary.

Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>

arch/src/aarch64/fdt.rs

@@ -17,8 +17,8 @@ use super::super::InitramfsConfig;
 use super::get_fdt_addr;
 use super::gic::GicDevice;
 use super::layout::{
-    IRQ_BASE, MEM_32BIT_DEVICES_SIZE, MEM_32BIT_DEVICES_START, PCI_MMCONFIG_SIZE,
-    PCI_MMCONFIG_START,
+    IRQ_BASE, MEM_32BIT_DEVICES_SIZE, MEM_32BIT_DEVICES_START, MEM_PCI_IO_SIZE, MEM_PCI_IO_START,
+    PCI_HIGH_BASE, PCI_MMCONFIG_SIZE, PCI_MMCONFIG_START,
 };
 use vm_fdt::{FdtWriter, FdtWriterResult};
 use vm_memory::{Address, Bytes, GuestAddress, GuestMemory, GuestMemoryError};
@@ -413,7 +413,16 @@ fn create_pci_nodes(
     // Add node for PCIe controller.
     // See Documentation/devicetree/bindings/pci/host-generic-pci.txt in the kernel
     // and https://elinux.org/Device_Tree_Usage.
+    let pci_device_base = pci_device_base + PCI_HIGH_BASE;
     let ranges = [
+        // io addresses
+        0x1000000,
+        0_u32,
+        0_u32,
+        (MEM_PCI_IO_START.0 >> 32) as u32,
+        MEM_PCI_IO_START.0 as u32,
+        (MEM_PCI_IO_SIZE >> 32) as u32,
+        MEM_PCI_IO_SIZE as u32,
         // mmio addresses
         0x2000000,                                // (ss = 10: 32-bit memory space)
         (MEM_32BIT_DEVICES_START.0 >> 32) as u32, // PCI address

arch/src/aarch64/layout.rs

@@ -54,12 +54,12 @@ pub const UEFI_SIZE: u64 = 0x0400_0000;
 /// Below this address will reside the GIC, above this address will reside the MMIO devices.
 pub const MAPPED_IO_START: u64 = 0x0900_0000;
 
-/// Space 0x0900_0000 ~ 0x1000_0000 is reserved for legacy devices.
+/// Space 0x0900_0000 ~ 0x0905_0000 is reserved for legacy devices.
 pub const LEGACY_SERIAL_MAPPED_IO_START: u64 = 0x0900_0000;
 pub const LEGACY_RTC_MAPPED_IO_START: u64 = 0x0901_0000;
 pub const LEGACY_GPIO_MAPPED_IO_START: u64 = 0x0902_0000;
 
-/// Space 0x0905_0000 ~ 0x906_0000 is reserved for pcie io address
+/// Space 0x0905_0000 ~ 0x0906_0000 is reserved for pcie io address
 pub const MEM_PCI_IO_START: GuestAddress = GuestAddress(0x0905_0000);
 pub const MEM_PCI_IO_SIZE: u64 = 0x10000;
 
@@ -91,6 +91,9 @@ pub const RSDP_POINTER: GuestAddress = GuestAddress(ACPI_START);
 /// Kernel start after FDT and ACPI
 pub const KERNEL_START: u64 = ACPI_START + ACPI_MAX_SIZE as u64;
 
+/// Pci high memory base
+pub const PCI_HIGH_BASE: u64 = 0x80_0000_0000_u64;
+
 // As per virt/kvm/arm/vgic/vgic-kvm-device.c we need
 // the number of interrupts our GIC will support to be:
 // * bigger than 32

arch/src/aarch64/mod.rs

@@ -10,6 +10,8 @@ pub mod gic;
 pub mod layout;
 /// Logic for configuring aarch64 registers.
 pub mod regs;
+/// Module for loading UEFI binary.
+pub mod uefi;
 
 pub use self::fdt::DeviceInfoForFdt;
 use crate::DeviceType;
@@ -182,6 +184,11 @@ pub fn get_kernel_start() -> u64 {
     layout::KERNEL_START
 }
 
+///Return guest memory address where the uefi should be loaded.
+pub fn get_uefi_start() -> u64 {
+    layout::UEFI_START
+}
+
 // Auxiliary function to get the address where the device tree blob is loaded.
 fn get_fdt_addr() -> u64 {
     layout::FDT_START

arch/src/aarch64/uefi.rs

@@ -0,0 +1,43 @@
+// Copyright 2020 Arm Limited (or its affiliates). All rights reserved.
+
+use std::io::{Read, Seek, SeekFrom};
+use std::result;
+use vm_memory::{Bytes, GuestAddress, GuestMemory};
+
+/// Errors thrown while loading UEFI binary
+#[derive(Debug)]
+pub enum Error {
+    /// Unable to seek to UEFI image start.
+    SeekUefiStart,
+    /// Unable to seek to UEFI image end.
+    SeekUefiEnd,
+    /// UEFI image too big.
+    UefiTooBig,
+    /// Unable to read UEFI image
+    ReadUefiImage,
+}
+type Result<T> = result::Result<T, Error>;
+
+pub fn load_uefi<F, M: GuestMemory>(
+    guest_mem: &M,
+    guest_addr: GuestAddress,
+    uefi_image: &mut F,
+) -> Result<()>
+where
+    F: Read + Seek,
+{
+    let uefi_size = uefi_image
+        .seek(SeekFrom::End(0))
+        .map_err(|_| Error::SeekUefiEnd)? as usize;
+
+    // edk2 image on virtual platform is smaller than 3M
+    if uefi_size > 0x300000 {
+        return Err(Error::UefiTooBig);
+    }
+    uefi_image
+        .seek(SeekFrom::Start(0))
+        .map_err(|_| Error::SeekUefiStart)?;
+    guest_mem
+        .read_exact_from(guest_addr, uefi_image, uefi_size)
+        .map_err(|_| Error::ReadUefiImage)
+}

arch/src/lib.rs

@@ -74,8 +74,8 @@ pub mod aarch64;
 #[cfg(target_arch = "aarch64")]
 pub use aarch64::{
     arch_memory_regions, configure_system, configure_vcpu, fdt::DeviceInfoForFdt,
-    get_host_cpu_phys_bits, get_kernel_start, initramfs_load_addr, layout,
-    layout::CMDLINE_MAX_SIZE, layout::IRQ_BASE, EntryPoint,
+    get_host_cpu_phys_bits, get_kernel_start, get_uefi_start, initramfs_load_addr, layout,
+    layout::CMDLINE_MAX_SIZE, layout::IRQ_BASE, uefi, EntryPoint,
 };
 
 #[cfg(target_arch = "x86_64")]