In case the host MAC address associated with a TAP device wasn't
explicitly provided by the user, Cloud Hypervisor would get the host MAC
associated by default with this TAP device and store it through the
network config. Problem is, in the context of a snapshot/restore, that
meant the network config provided by the user was different on the
destination host compared to the source host. This was causing an issue
when Cloud Hypervisor wasn't started with CAP_NET_ADMIN permissions as
it couldn't set the host MAC address on the destination, while the
source never needed these permissions since the MAC was automatically
allocated by the kernel.
We're fixing this issue by setting the host MAC address when it's
explicitly requested by the user through the network config, and making
the host MAC immutable so that it can't be changed at runtime.
Signed-off-by: Sebastien Boeuf <sboeuf@meta.com>
Only set the VIRTIO_NET_S_ANNOUNCE status bit if the feature
VIRTIO_NET_F_GUEST_ANNOUNCE was acknowledged.
Signed-off-by: Rob Bradford <rbradford@meta.com>
The virtio-net guest announce feature bit was accidentally dropped
during upstreaming, so the device never advertised it to guests. Restore
the feature offer for virtio-net.
On-behalf-of: SAP sebastian.eydam@sap.com
Signed-off-by: Sebastian Eydam <sebastian.eydam@cyberus-technology.de>
Advertise `VIRTIO_NET_F_GUEST_ANNOUNCE` on virtio-net devices, surface
`VIRTIO_NET_S_ANNOUNCE` through config status, and handle
`VIRTIO_NET_CTRL_ANNOUNCE_ACK` on the control queue.
This adds the guest-visible state needed for post-migration or
post-restore announce requests; the VMM side triggering is added in
follow-up commits.
The motivation is to reduce post-migration and post-restore
connectivity gap. After a live migration or after restoring, it can
take the guest several seconds to be reachable again over the network.
With these announcements, the network path should be refreshed within a
few milliseconds.
On-behalf-of: SAP sebastian.eydam@sap.com
Signed-off-by: Sebastian Eydam <sebastian.eydam@cyberus-technology.de>
Expose `VIRTIO_NET_S_LINK_UP` through the virtio-net config status field
when `VIRTIO_NET_F_STATUS` was negotiated.
This makes the guest-visible status bits reflect the device runtime
state and prepares the config status path used by later post-migration
announce handling.
On-behalf-of: SAP sebastian.eydam@sap.com
Signed-off-by: Sebastian Eydam <sebastian.eydam@cyberus-technology.de>
We have larger cloud deployments and analyzed the logs. Let's silence
some messages that generally provide little value on the `info!` level.
On-behalf-of: SAP philipp.schuster@sap.com
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
Import the modules used in the crate instead of spelling the full paths
at every use site, and drop the now-unnecessary crate-level
#![expect(clippy::absolute_paths)].
Signed-off-by: Henry Hrvoje Tonkovac <htonkovac@gmail.com>
Assisted-by: Claude:Opus-4.8
Convert the still-needed #[allow]s to #[expect] so they warn if the
lints stop firing.
Part of #8326.
Signed-off-by: Tushar Khatri <hello@tusharkhatri.in>
Take the recent thread refactor further. Bundle a device's worker
JoinHandles together with the kill event that stops them into a single
WorkerThreads value, owned by VirtioCommon. Its Drop signals the workers
to exit, unparks any parked for migration, and joins them.
This makes a detached/leaked worker unrepresentable. reset(),
wait_for_epoll_threads() and VhostUserCommon::shutdown() now happen when
dropping the WorkerThreads, and the unpark-before-join teardown now
lives in one place.
Assisted-by: Claude:Opus-4.8
Signed-off-by: Dylan Reid <dgreid@fb.com>
Signed-off-by: Rob Bradford <rbradford@meta.com>
Replace use of spawn_virtio_thread() helper with the new method on
VirtioCommon to handle thread management as well as spawning. As a
result this cleanly handles reset if it fails to spawn the thread.
Assisted-by: Claude:Opus-4.7
Signed-off-by: Rob Bradford <rbradford@meta.com>
Rely on the vector of threads in VirtioCommon for storing all the
handles of the spawned threads rather than storing them in the devices
or in VhostUserCommon directly.
Assisted-by: Claude:Opus-4.7
Signed-off-by: Rob Bradford <rbradford@meta.com>
spawn_virtio_thread now marks the device as NEEDS_RESET and notifies
the guest whenever the worker thread exits with an error, so the
per handler needs_reset() gate and the handle_queue_iterator_error()
helper in net are redundant.
Let virtqueue iterator errors propagate out of the worker thread
through DeviceError::NetQueuePair. Drop the unused device_status
field and the device_needs_reset and mark_device_needs_reset
imports.
No functional change for the guest. NEEDS_RESET is still set and
the config interrupt is still raised on virtqueue corruption.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Worker threads spawned through spawn_virtio_thread previously wrote to
exit_evt on any clean Err return, taking the whole VMM down on a single
failed device worker. A guest induced fault in any virtio device thus
propagated into a host wide failure.
Route the Err return through the shared mark_device_needs_reset helper
instead. The helper sets the DEVICE_NEEDS_RESET bit on device_status
and triggers a config change interrupt, so the device goes idle and
the guest is informed. The thread exits cleanly without killing the
rest of the VMM.
The panic and the seccomp filter apply paths keep writing to exit_evt.
A panicked worker may have left poisoned locks or partially mutated
state, so a hard exit remains the right policy there.
spawn_virtio_thread now takes the device_status and the interrupt
callback. Every native virtio and vhost-user call site is updated to
pass them in.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Both block and net implement the same DEVICE_NEEDS_RESET bookkeeping
when a corrupted virtqueue request is detected. They set the bit,
trigger a config change interrupt and log a warning. Move that logic
into shared device_needs_reset and mark_device_needs_reset helpers in
lib.rs and update both call sites to use them.
No functional change.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
If querying the fd's MTU fails (because it was from a different network
namespace). Degrade gracefully by not advertising the VIRTIO_NET_F_MTU
feature and instead let the guest kernel use the default 1500 Ethernet
MTU.
Signed-off-by: Rob Bradford <rbradford@meta.com>
Previously the interrupt was created in VirtioPciDevice, moved via the
Option::take() to the VirtioPciDeviceActivator and then moved to the
VirtioDevice upon activation. On reset it would be moved back ready for
reactivation.
Since this already an Arc type remove the wrapping Option and instead
refcount it such that the VirtioPciDevice can continue to hold onto it
for later activations.
This significantly simplifies the reset() logic as there is no need to
hand back the interrupt.
A few devices used whether the interrupt was Some to make triggering an
interrupt a no-op. However the MSI-X interrupt routing already drops the
interrupt if the driver hasn't yet configured the vector so it is safe
to trigger the interrupt before device activation (e.g. balloon resize
request before driver loaded).
VirtioCommon still retains an Option<..> for the interrupt as the
interrupt is not known until activation time (after this has been
created). A helper VirtioCommon::trigger_interrupt() has been added to
handle this.
Signed-off-by: Rob Bradford <rbradford@meta.com>
Rename from iommu to access_platform_enabled. The original name was
iommu as this feature was exposed for devices behind an IOMMU however
this feature is also now used for confidential VMs so adopt a more
general name.
Signed-off-by: Rob Bradford <rbradford@meta.com>
This forwards through to the VirtioCommon implementation and can be used
to simplify the virtio PCI access code.
Signed-off-by: Rob Bradford <rbradford@meta.com>
Use the new virtio feature gated accessor when creating the handlers for
the virtio devices. This now means that the translations via the
accessor will only be applied if the feature is acked in accordance with
the spec.
Signed-off-by: Rob Bradford <rbradford@meta.com>
Now on the generic restore path the worker thread is notified on the
events and also the guest is notified via the interrupt. This avoids the
same "livelock" situation that required this "driver_awake" workaround
when restoring the net device.
Signed-off-by: Rob Bradford <rbradford@meta.com>
When configuring multiple queues for a virtio device, the guest can
activate between 1 and the configured amout of queues. The firmware,
for example, may activate only one queue, while a Linux guest would
likely activate all available queues.
The constructor of virtio-net initializes the `paused_sync` barrier
using the configured queue count (plus one for the main thread). This
can be wrong if the guest enables a different number of queues at
activation time, which can make pause hang. Thus, we now recompute the
barrier size from the queues that are actually activated.
On-behalf-of: SAP sebastian.eydam@sap.com
Signed-off-by: Sebastian Eydam <sebastian.eydam@cyberus-technology.de>
A buggy or malicious guest may write an inappropriate value into
virtqueue's next_avail field. This will result in an error
when iterating over the queue:
863837ef86/virtio-queue/src/queue.rs (L708)
but this error is (logged and) ignored if pop_descriptor_chain()
is used:
863837ef86/virtio-queue/src/queue.rs (L583)
A reasonable approach, implemented here, is to mark the device as
NEEDS_RESET and ignore further queue events until the guest
reinitializes the device.
How this patch was tested:
Linux kernel was patched to trigger a bad next_avail when the
virtqueue queue counter reaches 5000:
--------------- START OF LINUX KERNEL PATCH ----------
$ git diff
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index b784aab668670..989f2a0c64a77 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -15,6 +15,9 @@
#include <linux/spinlock.h>
#include <xen/xen.h>
+
+void virtqueue_kick_always(struct virtqueue *vq);
+
#ifdef DEBUG
/* For development, we want to crash whenever the ring is screwed. */
#define BAD_RING(_vq, fmt, args...) \
@@ -677,6 +680,12 @@ static inline int virtqueue_add_split(
struct virtqueue *_vq,
* new available array entries. */
virtio_wmb(vq->weak_barriers);
vq->split.avail_idx_shadow++;
+ {
+ if ((vq->split.avail_idx_shadow % 100) == 0)
+ printk(KERN_ERR "avail idx: %d",
+ (int)vq->split.avail_idx_shadow);
+ if (vq->split.avail_idx_shadow == 5000)
+ vq->split.avail_idx_shadow = 0;
+ }
vq->split.vring.avail->idx = cpu_to_virtio16(_vq->vdev,
vq->split.avail_idx_shadow);
vq->num_added++;
@@ -689,6 +698,11 @@ static inline int virtqueue_add_split(
struct virtqueue *_vq,
if (unlikely(vq->num_added == (1 << 16) - 1))
virtqueue_kick(_vq);
+ {
+ if (unlikely(vq->split.avail_idx_shadow == 0))
+ virtqueue_kick_always(_vq);
+ }
+
return 0;
unmap_release:
@@ -2515,6 +2529,11 @@ bool virtqueue_kick(struct virtqueue *vq)
}
EXPORT_SYMBOL_GPL(virtqueue_kick);
+void virtqueue_kick_always(struct virtqueue *vq)
+{
+ virtqueue_kick_prepare(vq);
+ virtqueue_notify(vq);
+}
/**
* virtqueue_get_buf_ctx - get the next used buffer
* @_vq: the struct virtqueue we're talking about.
--------------- END OF LINUX KERNEL PATCH ----------
Then the kernel was booted, and the host pinged until the
nic became unresponsive:
ping -i 0.002 192.168.4.1
Device status was confirmed using
cat /sys/class/net/eth0/device/status
(it was 0x4f).
Then the device was re-initialized:
DEV_NAME=$(basename $(readlink -f /sys/class/net/eth0/device))
echo $DEV_NAME | tee /sys/bus/virtio/drivers/virtio_net/unbind
echo $DEV_NAME | tee /sys/bus/virtio/drivers/virtio_net/bind
ip link set eth0 up
At this point networking became healthly again.
Signed-off-by: Peter Oskolkov <posk@google.com>
Rename the transport feature bit constant from
VIRTIO_F_IOMMU_PLATFORM to VIRTIO_F_ACCESS_PLATFORM across
the entire virtio-devices crate.
The virtio specification as of v1.1 carries bit 33 as
VIRTIO_F_ACCESS_PLATFORM. The Linux kernel UAPI header
<linux/virtio_config.h> carries VIRTIO_F_IOMMU_PLATFORM
only as a backward-compatible alias.
This is a pure rename with no functional or behavioral
change.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
This is a follow-up of [0].
# Advantages
- This saves dozens of unneeded clone()s across the whole code base
- Makes it much easier to reason about how parameters are used
(often we passed owned Arc/Rc versions without actually needing
ownership)
# Exceptions
For certain code paths, the alternatives would require awkward or overly
complex code, and in some cases the functions are the logical owners of
the values they take. In those cases, I've added
#[allow(clippy::needless_pass_by_value)].
This does not mean that one should not improve this in the future.
[0] 6a86c157af
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
Consuming `&Arc<T>` as argument is almost always an antipattern as it
hides whether the callee is going to take over (shared) ownership
(by .clone()) or not. Instead, it is better to consume `&dyn T` or
`Arc<dyn T>` to be more explicit. This commit cleans up the code.
The change is very mechanic and was very easy to implement across the
code base.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
Fix clippy warning `uninlined_format_args` reported by rustc rustc
1.89.0 (29483883e 2025-08-04).
```console
warning: variables can be used directly in the `format!` string
--> block/src/lib.rs:649:17
|
649 | info!("{} failed to create io_uring instance: {}", error_msg, e);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#uninlined_format_args
= note: `#[warn(clippy::uninlined_format_args)]` on by default
help: change this to
|
649 - info!("{} failed to create io_uring instance: {}", error_msg, e);
649 + info!("{error_msg} failed to create io_uring instance: {e}");
|
```
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
This streamlines the code base to follow best practices for
error handling in Rust: Each error struct implements
std::error::Error (most due via thiserror::Error derive macro)
and sets its source accordingly.
This allows future work that nicely prints the error chains,
for example.
So far, the convention is that each error prints its
sub error as part of its Display::fmt() impl.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
Allow tap interfaces to be configured with an IPv6 address. The change
is fairly straightforward: we need to update the API types and CLI
parsing to accept either an IPv6 or IPv4 and then match on the IP
address type when the tap device is configured.
For IPv6 addresses, the netmask (prefix) must be provided at the same
time as the address itself (in the SIOCSIFADDR ioctl). They cannot be
configured separately. So we remove the separate "set_netmask" function
and convert "set_ip_addr" to also accept a netmask. For IPv4 addresses,
the IP address and netmask were already always set together, so this
should have no functional impact for users of IPv4 addresses.
Signed-off-by: Gregory Anders <ganders@cloudflare.com>
Replace `map_or()` on false condition with `is_some_and` to provide
better readability, as suggestted by v1.84.0-beta.1 `cargo clippy`.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
By introducing `imports_granularity="Module"` format strategy,
effectively groups imports from the same module into one line or block,
improving maintainability and readability.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Historically the Cloud Hypervisor coding style has been to ensure that
all imports are ordered and placed in a single group. Unfortunately
cargo fmt has no support for ensuring that all imports are in a single
group so if whitespace lines were added as part of the import statements
then they would only be odered correctly in the group.
By adopting "group_imports="StdExternalCrate" we can enforce a style
where imports are placed in at most three groups for std, external
crates and the crate itself. Choosing a style enforceable by the tooling
reduces the reviewer burden.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
With the nightly toolchain (2024-02-18) cargo check will flag up
redundant imports either because they are pulled in by the prelude on
earlier match.
Remove those redundant imports.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
This change is important to do a proper resource cleanup. We decided
to do this repetitive approach as VirtioCommon can't implement Drop
without major changes to the corresponding code. Also, devices such as
Net can't easily use the epoll_threads-abstraction from VirtioCommon as
it has multiple threads with different semantics.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
Add new configuration for offloading features, including
Checksum/TSO/UFO, and set these offloading features as
enabled by default.
Fixes: #4792.
Signed-off-by: Yong He <alexyonghe@tencent.com>
The information about the identifier related to a Snapshot is only
relevant from the BTreeMap perspective, which is why we can get rid of
the duplicated identifier in every Snapshot structure.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
