Cloud-Hypervisor takes a path for Unix socket, where it will listen
on. Users can connect to the other end of the socket and access serial
port on the guest.
"--serial socket=/path/to/socket" is the cmdline option to pass to
cloud-hypervisor.
Users can use socat like below to access guest's serial port once the
guest starts to boot:
socat -,crnl UNIX-CONNECT:/path/to/socket
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Split interrupt source group restore into two steps, first restore
the irqfd for each interrupt source entry, and second restore the
GSI routing of the entire interrupt source group.
This patch will reduce restore latency of interrupt source group,
and in a 200-concurrent restore test, the patch reduced the
average IOAPIC restore time from 15ms to 1ms.
Signed-off-by: Yong He <alexyonghe@tencent.com>
The information about the identifier related to a Snapshot is only
relevant from the BTreeMap perspective, which is why we can get rid of
the duplicated identifier in every Snapshot structure.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This makes it consistent with x86_64 and allows the performance metrics
tooling to continue to work on aarch64.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This is a cleaner approach to handling the I/O port write to 0x80.
Whilst doing this also use generate the timestamp at the start of the VM
creation. For consistency use the same timestamp for the ARM equivalent.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The calls to these functions are always preceded by a call to
InterruptSourceGroup::update(). By adding a masked boolean to that
function call it possible to remove 50% of the calls to the
KVM_SET_GSI_ROUTING ioctl as the the update will correctly handle the
masked or unmasked case.
This causes the ioctl to disappear from the perf report for a boot of
the VM.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
To emulate debug I/O port on arm64, we need trap from guest to VMM.
Generally, there are 3 ways to go:
1) execute a privilege intruction like "wfi";
2) access a system register;
3) access device MMIO region;
However, 1) and 2) often handled in kvm, thus 3) it's the choice.
There maybe lots of repeated work and enlarge the size of clh to develop
a new device, so it's better to reuse the current device. Luckily, I
find that pl011 is the eariest device initialized in kernel and, there
is reserved region in it which we can reuse for emulating debug I/O.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
error: unneeded late initalization
Error: --> devices/src/legacy/rtc_pl031.rs:294:9
|
294 | let v;
| ^^^^^^
|
= note: `-D clippy::needless-late-init` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `v` here
|
297 | let v = if (AMBA_ID_LOW..AMBA_ID_HIGH).contains(&offset) {
| +++++++
help: remove the assignments from the branches
|
299 ~ u32::from(PL031_ID[index])
300 | } else {
301 ~ match offset {
302 | RTCDR => self.get_time(),
303 | RTCMR => {
304 | // Even though we are not implementing RTC alarm we return the last value
...
help: add a semicolon after the `if` expression
|
317 | };
| +
error: unneeded late initalization
Error: --> devices/src/legacy/uart_pl011.rs:297:9
|
297 | let v;
| ^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `v` here
|
299 | let v = if (AMBA_ID_LOW..AMBA_ID_HIGH).contains(&(offset >> 2)) {
| +++++++
help: remove the assignments from the branches
|
301 ~ u32::from(PL011_ID[index])
302 | } else {
303 ~ match offset >> 2 {
304 | UARTDR => {
305 | let c: u32;
306 | let r: u32;
...
help: add a semicolon after the `if` expression
|
340 | };
| +
error: unneeded late initalization
Error: --> devices/src/legacy/uart_pl011.rs:305:21
|
305 | let c: u32;
| ^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `c` here
|
309 | let c: u32 = self.read_fifo.pop_front().unwrap_or_default().into();
| ~~~~~~~~~~
error: unneeded late initalization
Error: --> devices/src/legacy/uart_pl011.rs:306:21
|
306 | let r: u32;
| ^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `r` here
|
320 | let r: u32 = c;
| ~~~~~~~~~~
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In preparation for reorganizing how the serial output is constructed
add methods to the serial devices for setting the out buffer after the
device is created.
Also add a method to enable flushing the output buffer to be used to
write the buffer to the PTY fd once the PTY is writable.
Signed-off-by: William Douglas <william.douglas@intel.com>
With the new beta version, clippy complains about redundant allocation
when using Arc<Box<dyn T>>, and suggests replacing it simply with
Arc<dyn T>.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Issue from beta verion of clippy:
Error: --> vm-virtio/src/queue.rs:700:59
|
700 | if let Some(used_event) = self.get_used_event(&mem) {
| ^^^^ help: change this to: `mem`
|
= note: `-D clippy::needless-borrow` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
Signed-off-by: Bo Chen <chen.bo@intel.com>
In order to support using Versionize for state structures it is necessary
to use simpler, primitive, data types in the state definitions used for
snapshot restore.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Simplify snapshot & restore code by using generics to specify helper
functions that take / make a Serialize / Deserialize struct
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
error: redundant slicing of the whole range
Error: --> devices/src/legacy/gpio_pl061.rs:298:37
|
298 | let value = read_le_u32(&data[..]);
| ^^^^^^^^^ help: use the original slice instead: `data`
|
= note: `-D clippy::redundant-slicing` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_slicing
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
error: name `GPIOInterruptDisabled` contains a capitalized acronym
Error: --> devices/src/legacy/gpio_pl061.rs:46:5
|
46 | GPIOInterruptDisabled,
| ^^^^^^^^^^^^^^^^^^^^^ help: consider making the acronym lowercase, except the initial letter: `GpioInterruptDisabled`
|
= note: `-D clippy::upper-case-acronyms` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
