Add an option in the CLI to enable nested support.
Adding an option --cpu nested=on|off to the CPU
argument to enable nested support for Microsoft
Hypervisor. By default it is enabled for both KVM
and MSHV.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
While an IGVM is provided validation fails as there is
no kernel or firmware. This patch fixes the sev_snp boot
failure.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
For a graceful resource management of externally provided FDs in Cloud
Hypervisor, corresponding FDs need to be closed on a device removal.
This is the case for virtio-net devices using external FDs, for example.
With the fix introduced in this commit, we allow management software to
properly clean up resources, e.g., libvirt can clean up tap devices.
PS: CHV uses "added" and "removed", which has the same meaning as
hot device attach/hotplug and hot device detach/unplug.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
Deserializing values as `-1` makes sense to prevent errors, so let's
keep it. However, serializing them differently adds confusion. For
example, a `ch-remote info` call should not report `-1` but the actual
FDs.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
(1) The old messages are missing the "why" part. With this change, users
of Cloud Hypervisor have somehow more context and people looking at
the code perfectly know what's going on.
(2) Using warn! implies that the user should take action, but in this
case, there’s nothing the user can do. If the API is used correctly
and file descriptors are passed via an SCM_RIGHTS message over a
UNIX domain socket, everything works as intended. In that case,
there's no need to issue a warning — debug! is sufficient.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This change enables easier integration with third-party
tools by removing the requirement for a dummy IP address
when configuring tap devices. The modification applies to
both CLI and API interactions.
Previously, cloud-hypervisor would automatically set a
default static IP address (192.168.249.1) if none was provided.
This could lead to:
* multiple devices without explicit IP configurations
would end up with the same default IP
* unnecessary inclusion of this IP in firewall rules
* the IP address could clash with host networking and
routing
This introduces a new constraint:
When providing an IP, the mask must also be provided.
Removes warnings introduced in #7179.
Closes issue #7083.
Signed-off-by: Maximilian Güntner <code@mguentner.de>
arch::aarch64::fdt::create_cpu_nodes will always look at this if it
exists. (If it doesn't exist, this is a no-op —
add_rule_with_access() won't add rules for paths that don't exist.)
Fixes: b3e5738b4 ("vmm: Introduce ApplyLandlock trait")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Without write access to the directory the socket will go in, it's not
possible to create the socket.
I've tested outgoing connections from the VM, and they don't seem to
need read permissions on that directory to connect to a socket on the
host.
Fixes: b3e5738b4 ("vmm: Introduce ApplyLandlock trait")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
path_beneath_rules() just needs the paths given to it to be
AsRef<Path>, so there's no need to create new PathBufs for it.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Raise the max number of supported (v)CPUs on kvm x86_64 hosts
to 8192 (the max allowed value of CONFIG_NR_CPUS in the Linux kernel).
Other platfroms keep their existing CPU limits pending further
development and testing.
The change has been tested on Intel and AMD hosts.
Signed-off-by: Barret Rhoden <brho@google.com>
Signed-off-by: Neel Natu <neelnatu@google.com>
Signed-off-by: Ofir Weisse <oweisse@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
This commit removes the SGX support from cloud hypervisor. SGX support
was deprecated in May as part of #7090.
Signed-off-by: Shubham Chakrawar <schakrawar@crusoe.ai>
Currently, the following scenarios are supported by Cloud Hypervisor to
bootstrap a VM:
1. provide firmware
2. provide kernel
3. provide kernel + cmdline
4. provide kernel + initrd
5. provide kernel + cmdline + initrd
As the difference between `--firmware` and `--kernel` is not very clear
currently, especially as both use/support a Xen PVH entry, adding this
helps to identify the cause of misconfiguration.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
On-behalf-of: SAP philipp.schuster@sap.com
This allows us to enable/disable the fw_cfg device via the cli
We can also now upload files into the guest vm using fw_cfg_items
via the cli
Signed-off-by: Alex Orozco <alexorozco@google.com>
Allow tap interfaces to be configured with an IPv6 address. The change
is fairly straightforward: we need to update the API types and CLI
parsing to accept either an IPv6 or IPv4 and then match on the IP
address type when the tap device is configured.
For IPv6 addresses, the netmask (prefix) must be provided at the same
time as the address itself (in the SIOCSIFADDR ioctl). They cannot be
configured separately. So we remove the separate "set_netmask" function
and convert "set_ip_addr" to also accept a netmask. For IPv4 addresses,
the IP address and netmask were already always set together, so this
should have no functional impact for users of IPv4 addresses.
Signed-off-by: Gregory Anders <ganders@cloudflare.com>
By introducing `imports_granularity="Module"` format strategy,
effectively groups imports from the same module into one line or block,
improving maintainability and readability.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Historically the Cloud Hypervisor coding style has been to ensure that
all imports are ordered and placed in a single group. Unfortunately
cargo fmt has no support for ensuring that all imports are in a single
group so if whitespace lines were added as part of the import statements
then they would only be odered correctly in the group.
By adopting "group_imports="StdExternalCrate" we can enforce a style
where imports are placed in at most three groups for std, external
crates and the crate itself. Choosing a style enforceable by the tooling
reduces the reviewer burden.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Pvmemcontrol provides a way for the guest to control its physical memory
properties, and enables optimizations and security features. For
example, the guest can provide information to the host where parts of a
hugepage may be unbacked, or sensitive data may not be swapped out, etc.
Pvmemcontrol allows guests to manipulate its gPTE entries in the SLAT,
and also some other properties of the memory map the back's host memory.
This is achieved by using the KVM_CAP_SYNC_MMU capability. When this
capability is available, the changes in the backing of the memory region
on the host are automatically reflected into the guest. For example, an
mmap() or madvise() that affects the region will be made visible
immediately.
There are two components of the implementation: the guest Linux driver
and Virtual Machine Monitor (VMM) device. A guest-allocated shared
buffer is negotiated per-cpu through a few PCI MMIO registers, the VMM
device assigns a unique command for each per-cpu buffer. The guest
writes its pvmemcontrol request in the per-cpu buffer, then writes the
corresponding command into the command register, calling into the VMM
device to perform the pvmemcontrol request.
The synchronous per-cpu shared buffer approach avoids the kick and busy
waiting that the guest would have to do with virtio virtqueue transport.
The Cloud Hypervisor component can be enabled with --pvmemcontrol.
Co-developed-by: Stanko Novakovic <stanko@google.com>
Co-developed-by: Pasha Tatashin <tatashin@google.com>
Signed-off-by: Yuanchu Xie <yuanchu@google.com>
This requires stashing the config values in `struct Vmm`. The configs
should be validated before before creating the VMM thread. Refactor the
code and update documentation where necessary.
The place where the rules are applied remain the same.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Introduce ApplyLandlock trait and add implementations to VmConfig
elements with PathBufs. This trait adds config specific rules to
landlock ruleset.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Users can use this parameter to pass extra paths that 'vmm' and its
child threads can use at runtime. Hotplug is the primary usecase for
this parameter.
In order to hotplug devices that use local files: disks, memory zones,
pmem devices etc, users can use this option to pass the path/s that will
be used during hotplug while starting cloud-hypervisor. Doing this will
allow landlock to add required rules to grant access to these paths when
cloud-hypervisor process starts.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Users can use this cmdline option to enable/disable Landlock based
sandboxing while running cloud-hypervisor.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
When using multiple PCI segments, the 32-bit and 64-bit mmio
aperture is split equally between each segment. Add an option
to configure the 'weight'. For example, a PCI segment with a
`mmio32_aperture_weight` of 2 will be allocated twice as much
32-bit mmio space as a normal PCI segment.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
The 'NetConfig' may contain FDs which can't be serialized correctly, as
FDs can only be donated from another process via a Unix domain socket
with `SCM_RIGHTS`. To avoid false use of the serialized FDs, this patch
explicitly set 'NetConfig' FDs as invalid for (de)serialization.
See: #6286
Signed-off-by: Bo Chen <chen.bo@intel.com>
On platforms where PCIe P2P is supported, inject a PCI capability into
NVIDIA GPU to indicate support.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
The host data provided at launch. Data is passed
to the hypervisor during the completion of the
isolated import.
Host Data provided by the hypervisor during guest launch.
The firmware includes this value in all attestation
reports for the guest.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Currently the only way to set the affinity for virtio block threads is
to boot the VM, search for the tid of each of the virtio block threads,
then set the affinity manually. This commit adds an option to pin virtio
block queues to specific host cpus (similar to pinning vcpus to host
cpus). A queue_affinity option has been added to the disk flag in
the cli to specify a mapping of queue indices to host cpus.
Signed-off-by: acarp <acarp@crusoeenergy.com>
This commit adds the debug-console (or debugcon) device to CHV. It is a
very simple device on I/O port 0xe9 supported by QEMU and BOCHS. It is
meant for printing information as easy as possible, without any
necessary configuration from the guest at all.
It is primarily interesting to OS/kernel and firmware developers as they
can produce output as soon as the guest starts without any configuration
of a serial device or similar. Furthermore, a kernel hacker might use
this device for information of type B whereas information of type A are
printed to the serial device.
This device is not used by default by Linux, Windows, or any other
"real" OS, but only by toy kernels and during firmware development.
In the CLI, it can be configured similar to --console or --serial with
the --debug-console parameter.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
These Default implementations either don't produce valid configs, are
no longer used outside of tests, or both.
For the tests, we can define our own local "default" values that make
the most sense for the tests, without worrying about what's
a (somewhat) sensible "global" default value.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
On hosts with >256 cpus, setting the cpu affinity to a host cpu index
>255 will return an error because type of `host_cpu` is `u8`.
This commit changes the type of `host_cpu` to `usize` to remove this
limitation.
Signed-off-by: Sean Banko <sbanko@crusoeenergy.com>
The VIRTIO specification[1] says:
> The upper 32 bits of the CID are reserved and zeroed.
We should therefore not allow the user to supply a VSOCK CID with
those bits set. To accomplish this, limit the public API of the
virtio-vsock device to only accept 32-bit CIDs, while still using
64-bit CIDs internally since that's how virtio-vsock works.
[1]: https://docs.oasis-open.org/virtio/virtio/v1.2/csd01/virtio-v1.2-csd01.html#x1-4400004
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Add a 'rate_limit_groups' field to VmConfig that defines a set of
named RateLimiterGroups.
When the 'rate_limit_group' field of DiskConfig is defined, all
virtio-blk queues will be rate-limited by a shared RateLimiterGroup.
The lifecycle of all RateLimiterGroups is tied to the Vm.
A RateLimiterGroup may exist even if no Disks are configured to use
the RateLimiterGroup. Disks may be hot-added or hot-removed from the
RateLimiterGroup.
When the 'rate_limiter' field of DiskConfig is defined, we construct
an anonymous RateLimiterGroup whose lifecycle is tied to the Disk.
This is primarily done for api backwards compatability. Importantly,
the behavior is not the same! This implementation rate_limits the
aggregate bandwidth / iops of an individual disk rather than the
bandwidth / iops of an individual queue of a disk.
When neither the 'rate_limit_group' or the 'rate_limiter' fields of
DiskConfig is defined, the Disk is not rate-limited.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
This patch adds igvm to the Vm config and params as well as
the command line argument to pass igvm file to load into
guest memory. The file must maintain the IGVM format.
The CLI option is featured guarded by igvm feature gate.
The IGVM(Independent Guest Virtual Machine) file format
is designed to encapsulate all information required to
launch a virtual machine on any given virtualization stack,
with support for different isolation technologies such as
AMD SEV-SNP and Intel TDX.
At a conceptual level, this file format is a set of commands created
by the tool that generated the file, used by the loader to construct
the initial guest state. The file format also contains measurement
information that the underlying platform will use to confirm that
the file was loaded correctly and signed by the appropriate authorities.
The IGVM file is generated by the tool:
https://github.com/microsoft/igvm-tooling
The IGVM file is parsed by the following crates:
https://github.com/microsoft/igvm
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Cloud-Hypervisor takes a path for Unix socket, where it will listen
on. Users can connect to the other end of the socket and access serial
port on the guest.
"--serial socket=/path/to/socket" is the cmdline option to pass to
cloud-hypervisor.
Users can use socat like below to access guest's serial port once the
guest starts to boot:
socat -,crnl UNIX-CONNECT:/path/to/socket
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
This fixes all typos found by the typos utility with respect to the config file.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
This feature flag gates the development for SEV-SNP enabled guest.
Also add a helper function to identify if SNP should be enabled for the
guest.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
This fixes the valid VM config unit tests, which would otherwise fail
to deserialize their expected JSON config due to the missing "gdb" field.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
The custom 'clone' duplicates 'preserved_fds' so that the validation
logic can be safely carried out on the clone of the VmConfig.
The custom 'drop' ensures 'preserved_fds' are safely closed when the
holding VmConfig instance is destroyed.
Signed-off-by: Bo Chen <chen.bo@intel.com>
