Some operations are only possible on base devices not on partitions.
Add functions to determine if a given device is a partition or a base
device and to get the base device to a given partition.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For data consistency it is essential that datasets are not modified by
z/OS applications during zdsfs access. This is currently ensured by
manually setting the device offline in z/OS before mounting it in Linux.
This patch improves the usability and data security by making this manual
step obsolete.
Before opening a dataset zdsfs will obtain an ENQ to mark it as in use for
z/OS and release the ENQ when closing the dataset.
A timer is set up that pings the z/OSMF REST services with the ENQ to
prevent it from a timeout after 10 minutes.
The behavior of zdsfs can be configured in a new config file or with new
command line options.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add library functions that allow to communicate with z/OSMF REST services
using libcurl.
Following three functions are added:
lzds_rest_get_enq()
to obtain an ENQ that will mark a dataset as in use to z/OS until
it is released again
lzds_rest_release_enq()
to release an ENQ and mark a dataset as no longer in use to z/OS
lzds_rest_ping()
to ping a z/OSMF REST server to check if it accessible
or to refresh an ENQ and prevent it from a timeout after 10 minutes
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Consolidate `ALIGN, __ALIGN_MASK, ARRAY_SIZE` macros and add them to
lib/zt_common.h. While at it, adapt coding style.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Support `lib/zt_common.h` to be used in assembler files. In addition,
add the macro `_AC` that can be used to make constant macros usable in
both assembler and C code.
Suggested-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The BIODASDRAS (Release Allocated Space) ioctl allows to release
track-wise or full space of an Extent Space Efficient DASD volume.
Provide a library function to utilise this functionality.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Provide a function to determine whether a DASD is an Extent Space
Efficient (ESE) volume.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move definitions mostly used by IOCTLs to libdasd. Clean up unused and
old definitions while at it as well.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For root the functions util_path_is_readable() and util_path_is_writable()
do not take the path's permissions into account. The function access()
succeeds as root is allowed to read/write any file regardless of its
permissions.
Introduce the functions util_path_is_readonly_file() and
util_path_is_writeonly_file() to test whether a path is a regular file and
is either read-only (neither user, group, nor other have write permission,
but one or more of user, group, and other have read permission) or
write-only (neither user, group, nor other have read permission, but one
or more of user, group, and other have write permission).
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reading DASD specific sysfs attributes should be collected in one
library. Move get_host_access_count() to libdasd/dasd_sys.
Remove the old implementation and update any user accordingly.
Also, fix the build order for zdsfs.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Many tools need to identify the device address of a given device. So
far, either the tool had its own implementation, or u2s_getbusid() was
used. Though, u2s_getbusid() was mainly designed for and used by the
DASD tools.
Introduce util_sys with a first function util_sys_get_dev_addr() which
provides a more universal way to identify the device address which is
not limited to one particular device type. The device address represents
either a busid (e.g. DASD), slot address (NVMe), H:C:T:L tuple (SCSI),
or other id types associated with a device.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
dasdview and libdasd deal with DASD bus ids and should use a definition
for the size. libu2s already provides a definition, which is used by
dasdview. However, the size of 32 is a bit much and the definition
should be part of libdasd.
Including the terminating null byte ('\0') and considering a DASD bus id
length of 8 characters (e.g. 0.0.4711), this leads to a size of 9.
Provide such a definition via libdasd and update any user.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Enable zdsfs to access datasets that were created after zdsfs was
mounted without the need to remount zdsfs.
This is done by re-reading the VTOC with every readdir system call.
To ensure a consistent VTOC state the DASD device is reserved for
every VTOC read and released afterwards.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In wide format the header is separated from the rest of the
records by a separator line. Add support to print such a
separator line also between some records.
Add function util_rec_print_separator() that prints the
separator line for wide format only. For other formats this
is a NOP.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Functions rec_print_xxx allows to print records in
different formats. Add support to optionally indent
the output by a specific number of characters.
The indention is set using a new function util_rec_set_indent().
The default indention is zero, thus existing applications
will behave the same as before.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Acked-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The strlcpy() implementation in libu2s is beneficial for other tools as
well. Move the implementation to libutils and replace misc_strlcpy() in
libu2s accordingly.
Change the link order in zipl to make it build again.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The util_scandir_* functions may return 0 or -1, in which case no vector
is allocated in libutil/util_scandir.c. util_ptr_vec_free, called by
util_scandir_free or directly from lschp.c and lsscm.c, does always
call free for the vector which might be not initialized.
Fix this by always initializing the vector with NULL in __scandir and
add some api hardening by checking the vector and count in
util_ptr_vec_free before iterating over the vector.
And update the comment for util_scandir to indicate that -1 may be
returned in error cases plus that the vector is initialized with NULL.
Fixes: https://github.com/ibm-s390-tools/s390-tools/issues/43
Reported-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch prevents code duplication in vmcp related programs.
Some applications such as vmur, vmcp, and lsqeth
use z/VM CP commands to query information. Each program
uses its own defines and code.
Supply a library and common header file to use common code.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch
- moves function util_strstrip to libutil/util_libc.c and deletes the
extra files util_strstip.[ch]
- adds doxygen comments for util_strstrip()
- provides an example on how to use util_strstrip().
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Function strstrip strips leading and trailung
spaces from a given string.
During review it was decided to move this function
to the libutil library to make it available for other tools.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zdev tools use a hard-coded path to locate the vmcp binary. Since
this path may differ between distributions, the vmcp binary may not be
successfully located in all cases. Fix this by using the BINDIR macro
to determine the correct path. This macro is also used during
installation of the vmcp binary itself.
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
This commit is based on the s390-tools-1.39.0 version.
Changes on top of s390-tools-1.39.0:
- Add MIT license to all source files
- Add LICENSE file
- Transform REAMDE to README.md (markdown)
- Add AUTHORS.md file
- Add CONTRIBUTING.md file
- Move changelog from README to CHANGELOG.md file
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
