Using "chzdev -e" to configurate a device persistently, the
corresponding udev rule is also created, which will trigger a uevent
that sets the device online as soon as the group device is created.
If 'znetconf -r/R' is first used to remove such a configured device
(which won't remove the corresponding udev rule) and then
'znetconf -a/A' afterwards on the same device, either the error
"Failed to make <device> online" or "Failed to configure layer2=1"
will occur.
For the first error, the udev queue might not have been fully processed
and hence the check whether a device is online may fail due to that
race. Call 'udevadm settle' to ensure a fully processed queue before
checking whether a device is online.
The second error occurs, because configure_ccwgroupdev_option() does
not check whether the device is online. Add the check and set the
device offline if necessary. Also, log any details for debugging
purposes.
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Provide the status of the FC Endpoint Security information via the long
output of lsdasd for online Base and Alias devices.
New Output:
$ lsdasd -l c600
0.0.c600/dasdd/9412
status: n/f
type: ECKD
blksz: 512
size:
blocks:
extent_size: 1113
logical_capacity: 1113
space_allocated: 1113
use_diag: 0
readonly: 0
eer_enabled: 0
erplog: 0
hpf: 1
uid: IBM.750000000KMV11.c600.00
fc_security: Encryption
paths_installed: 38 39 3a 3b
paths_in_use: 38 39 3a 3b
paths_non_preferred:
paths_invalid_cabling:
paths_cuir_quiesced:
paths_invalid_hpf_characteristics:
paths_error_threshold_exceeded:
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When many domains per card are available, then the results of the SCDMD
CHSC call may not fit into the output area, and a partial result is
returned. The further results must be retrieved with another CHSC call.
Fix the code to pass the correct next-domain to the subsequent CHSC call
of a partial response. Otherwise the same set of domains 1 to n are
retrieved again, resulting in an infinite loop, because this will always
produce a partial result.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lszcrypt now shows a card/queue which is in 'deconfigured' state as
'deconfig' in the STATE column (verbose and non verbose mode).
chzcrypt became two new options: --config-on and --config-off to
switch one or more card devices to 'configured' or 'deconfigured'
state.
Both applications are able to handle older kernels which do now
provide the config sysfs attribute required for this new feature.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When udevadm is going to be used, try to locate it
in $PATH and if it fails, try to locate it in well-known
binary paths.
Signed-off-by: Guevenc Guelce <guvenc@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Hard-coding udevadm's location isn't robust enough - for instance,
Ubuntu 20.04 moved it to /usr/bin.
First see if we can reach it through $PATH, then fall back to hard-coded
locations that we know about.
Also when finally falling back to udevsettle, check that it exists.
Otherwise we end up throwing tons of "No such file or directory" error
messages at the user.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Consolidate `ALIGN, __ALIGN_MASK, ARRAY_SIZE` macros and add them to
lib/zt_common.h. While at it, adapt coding style.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This patch adds CEX7S exploitation support to lszcrypt and chzcrypt.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Dependent on kernel config option CHSC_SCH the device node /dev/chsc may
exist per default or not. In case the kernel is built with CHSC_SCH=M,
then the device driver is built as separate kernel module, and must
therefore be loaded using modprobe chsc_sch to make device node /dev/chsc
available.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When directory $SYSFSDIR/bus/ccwgroup does not exist znetconf issues an
error message and terminates. Its not even possible to get the output of
--help or --version. Fix that by moving the responsible check behind the
parameter evaluation.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The function util_path_exists() consumes its first parameter as format
string. Passing the user input specified to the chzdev option --export
as-is to the function opens up the possibility for a format string
injection.
Fixes: d542138868 ("zdev: use libutil provided path functions")
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Testing whether a file is a directory by comparing the struct stat
field st_mode against S_IFDIR is wrong. If st_mode has any access
permission bits set along with the file type code the test will always
fail.
The file type encoded in the struct stat field st_mode is actually an
enumeration. To test whether a file is a directory either extract the
file type from st_mode using the mask S_IFMT and compare it against
S_IFDIR or simply use the macro S_ISDIR().
Fixes: b627b8d8e1 ("Initial s390-tools-2.0.0 import")
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Also mark FCP devices with CHPID that is logically varied off,
e.g. after running "chchp -v 0 60".
Such FCP devices can be online, not failed, and are not defunct,
so the other existing markers do not appear.
Shows potential issues with FCP devices at one glance.
Examples:
$ lszfcp -He
0.0.1900 host0 NotAvailable
$ lszfcp -HeV
/sys/devices/css0/0.0.010d/0.0.1900 NotAvailable
/sys/class/fc_host/host0
/sys/class/scsi_host/host0
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Complements: 4036e80b26 ("lszfcp: add new output marker for non-good FCP devices (hosts)")
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zcryptstats tool displays usage statistics of IBM Crypto Express
adapters. It obtains cryptographic performance measurement data
periodically and displays the data for each cryptographic device for
each interval. A cryptographic device can be either a card device or
a queue device (APQN).
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
I often use "systool -v -m zfcp" but that's a bit longish to type
and contains more output than just the parameters I'm interested in.
"tail /sys/module/zfcp/parameters/*" is also not so nice.
"lszfcp -Z" makes it very easy and can be combined with the other
existing output options of lszfcp.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since zfcp lazily allocates Scsi_Host et al. on setting an FCP device
online for the first time since the last driver core bind to zfcp
(such as zfcp kernel module load),
lszfcp has only been showing FCP devices (vHBAs) that have been online
at least once including those that have been set offline again.
This is somewhat confusing.
Also it would be nice if lszfcp could be an easier to type replacement for
"lscss -t 17032/03" to simply show all devices bound to the zfcp device
driver.
Of course those FCP devices that have never been online, won't have any
zfcp-specific attribute details, only CIO attributes from the CCW bus.
They also do not have a Scsi_Host nor fc_host.
In order not to break any scripting or expectations around lszfcp,
make the new feature depend on the extended output command line option.
Example:
$ lszfcp -He
0.0.1880 - offline
$ lszfcp -HeV
/sys/devices/css0/0.0.010b/0.0.1880 offline
-
-
$ lszfcp -Hea
0.0.1880 - offline
Bus = "ccw"
availability = "good"
cmb_enable = "0"
cutype = "1731/03"
devtype = "1732/03"
modalias = "ccw:t1731m03dt1732dm03"
online = "0"
uevent = "DRIVER=zfcp"
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
s390-tools-1.8.1 introduced a new error message.
It gave the same and thus misleading error message as if no FCP device
(vHBA) found.
In order not to break any scripting built around lszfcp output,
only print the fixed error message depending on the extended output
command line option.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
s390-tools-1.8.0 introduced a regression skipping all FCP devices
that are currently "defunct".
Changing
$SYSFS/devices/css0/*/*/host*
to
$SYSFS/devices/css0/[0-9]*/[0-9]*/host*
was too strict as it won't match
$SYSFS/devices/css0/defunct/[0-9]*/host*
anymore.
Fix:
$SYSFS/devices/css0/[0-9d]*/[0-9]*/host*
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
s390-tools-1.8.1 introduced a regression skipping all fc_rports
with port_state != Online. While we need to skip some output parts
for a zfcp_port which does not exist anymore due to port_remove,
there are other cases with port_state != Online for which we should
not skip an fc_rport.
Such as port_state "Blocked" after a cable pull beyond host-adjacent switch
or port_state "Not Present" after dev_loss_tmo ran out.
This way the user can see the previously discovered ports,
even if they might currently not be usable for traffic.
Non-good ports are marked in the short output with suffix "NotOnline".
In order not to break scripting or expectations around lszfcp, make the new
feature depend on the extended output command line option.
Sysfs path globbing does not work for a removed zfcp_port
to obtain the FCP device bus-ID. Instead, properly walk the sysfs.
Examples with a removed zfcp_port:
$ lszfcp -Pe
0.0.50c0/0x500507680b2481fa rport-6:0-2
$ lszfcp -PeV
- (NoMoreZfcpPort:0.0.50c0/0x500507680b2481fa)
/sys/class/fc_remote_ports/rport-6:0-2
Examples with an existing zfcp_port but pulled fibre:
$ lszfcp -Pe
0.0.3c40/0x500507680b2181fb rport-7:0-4
$ lszfcp -PeV
/sys/devices/css0/defunct/0.0.3c40/0x500507680b2181fb
/sys/class/fc_remote_ports/rport-7:0-4
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Used in subsequent patches to guard their changes in order not to break
any scripting or expectations around the lszfcp output format.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Added some explanations about the columns shown with the
lszcrypt verbose output.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
IFNAMSIZ is the maximum buffer size for an interface name, including its
terminating zero byte. [1] strncpy() should therefore only copy a size
of 'IFNAMSIZ - 1' and the destination string should then be
null-terminated properly.
Use util_strlcpy() to correctly copy the string and get rid of the
followin GCC8 compile warning:
In function ‘ethtool_checksumming’,
inlined from ‘process_sysfs_attribute’ at lsqeth.c:333:5,
inlined from ‘print_device’ at lsqeth.c:468:3:
lsqeth.c:171:2: warning: ‘strncpy’ specified bound 16 equals destination
size [-Wstringop-truncat ion]
strncpy(ifr.ifr_name, if_name, IFNAMSIZ);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[1]: https://www.gnu.org/software/libc/manual/html_node/Interface-Naming.html
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Get rid of fixed buffers and avoid the following GCC8 compile warnings:
lszcrypt.c: In function ‘main’:
lszcrypt.c:642:28: warning: ‘%04x’ directive writing between 4 and 8
bytes into a region of size between 7 and 13 [-Wformat-overflow=]
sprintf(sub_dev, "%02x.%04x", id, dom);
^~~~
lszcrypt.c:642:22: note: directive argument in the range [0, 2147483647]
sprintf(sub_dev, "%02x.%04x", id, dom);
^~~~~~~~~~~
lszcrypt.c:642:5: note: ‘sprintf’ output between 8 and 18 bytes into a
destination of size 16
sprintf(sub_dev, "%02x.%04x", id, dom);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The linux.vnet.ibm.com addresses will be become disfunct by eoy.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With the latest kernel comes an extension for the zcrypt
device driver to support multiple zcrypt device nodes.
Here is the userspace part of this which adds a new
application zcryptctl for user friendly management of
this feature.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With kernel 4.19 there comes an extension to the existing
AP bus which supports alternate zcrypt drivers. For details
about this see kernel patch "s390/zcrypt: AP bus support for
alternate driver(s)". So now lszcrypt displays the driver
name in verbose mode. As some of the information displayed
by lszcrypt was based on sysfs attributes, which are only
available when the default zcrypt driver is bound to the
device, this also needed some rework. If a sysfs attribute
is not available because of an alternate driver binding
(or no driver) a question mark is printed into the field.
Together with this a slight rework of the displayed information
has been done. The two columns for pending requests and pending
replies has been merged to one pending column and the column
sizes have been adjusted.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Assume "N/A" for non-zfcp SCSI devices, such as iSCSI or virtio-scsi-ccw,
to not erroneously access absent zfcp-specific sysfs attributes.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Simply skip non-zfcp SCSI devices, such as iSCSI or virtio-scsi-ccw,
to not erroneously access absent zfcp-specific sysfs attributes.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The default bash setting have nullglob disabled so if
$SCSI_DEV/scsi_generic*
aka
/sys/bus/scsi/devices/*:*:*:*/scsi_generic*
does not match anything, it leaves the glob pattern unmodified and
SG_DEV=$(basename $SG_DEV/*)
results in the literal:
*
If $SG_INQ exists, it invoked sg_inq with more than the one allowed
positional argument for a SCSI generic device node:
sg_inq /dev/*
Causing error messages and the usage of sg_inq to land in $TAPE_SERIAL.
To not have to rely on the nullglob setting, explicitly check for the
existence of $SCSI_DEV/scsi_generic before evaluating
SG_DEV=$(basename $SG_DEV/*).
Also handle availability of sg_inq but absence of scsi_generic
individually to provide the user with a hint if only sg is missing.
Suggested-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Cc: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This should be more stable than parsing the IBM lin_tape proc-fs output.
If sysfs is not available or provides no match, fall back to proc-fs.
An alternative to "ls -1d ... | head -n1" would have been to use
"shopt -s extglob; ls -d $SCSI_DEV/lin_tape/$DEV_NAME+([0-9])"
but I did not want to have to rely on extglob potentially influencing
other old code of lstape.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
https://www.ibm.com/developerworks/linux/linux390/s390-tools-1.8.0.html
before the first upstream commit b627b8d8e1 ("Initial s390-tools-2.0.0
import") introduced SCSI tape/changer output for lstape. It used the SCSI
device serial number as lookup key to find a match in IBM lin_tape device
driver proc-fs output for a given SCSI device name. Since multiple paths
to the same tape/changer have the same serial number, multiple matches can
occur and distort the output:
% lstape
...
SCSI tape devices (found 12):
...
Generic Device Target Vendor Model Type State
sg0 IBMtape0 3 0:0:0:0 IBM ULT3580-TD6 tapedrv
running
sg1 IBMchanger0 1 2 3 0:0:0:1 IBM
3573-TL changer running
...
There are unexpected additional Device suffix numbers for each additional
path of the same tape/changer (independent of actual path failover
enablement in lin_tape). The multiple matches above cause excess arguments
to printf. Explaining the resulting output, the bash man page says:
"The format is reused as necessary to consume all of the arguments."
This also causes a wrong number of found devices.
Current lin_tape (v3.0.31) uses the printf format string
"%-8d%-12s%-25s%-16s%-16s%-10s" for fixed column proc-fs output.
This causes the following example input to lstape:
==> /proc/scsi/IBMchanger <==
lin_tape version: 3.0.31
lin_tape major number: 251
Attached Changer Devices:
Number model SN HBA SCSI FO Path
0 3573-TL 00L4U78W6497_LL0 Virtio SCSI HBA 0:0:0:1 Primary
1 3573-TL 00L4U78W6497_LL0 Virtio SCSI HBA 0:0:1:1 Alternate
2 3573-TL 00L4U78W6497_LL0 Virtio SCSI HBA 1:0:1:1 Alternate
3 3573-TL 00L4U78W6497_LL0 Virtio SCSI HBA 1:0:0:1 Alternate
==> /proc/scsi/IBMtape <==
lin_tape version: 3.0.31
lin_tape major number: 251
Attached Tape Devices:
Number model SN HBA SCSI FO Path
0 ULT3580-TD6 10WT037733 Virtio SCSI HBA 0:0:0:0 Primary
1 ULT3580-TD6 10WT037701 Virtio SCSI HBA 0:0:1:0 Primary
2 ULT3580-TD6 10WT037701 Virtio SCSI HBA 1:0:1:0 Alternate
3 ULT3580-TD6 10WT037733 Virtio SCSI HBA 1:0:0:0 Alternate
If that was reliable and stable, we could use fixed column parsing:
IBM_IDX=$(
awk 'BEGIN {
FIELDWIDTHS="8 12 25 16 16 10"
}
gensub(" ","","g",$5) == "'$SCSI_ID'"{
print gensub(" ","","g",$1)
}' /proc/scsi/$DEV_NAME
)
However, we can hardly guarantee a field value always fits into the left-
adjusted columns (printf won't cap to field width!). Also, the fixed column
format changed between lin_tape v3.0.20 and v3.0.18 from
"%-8d%-12s%-18s%-16s%-16s%-10s" with less width for the 'SN' field.
The column format also changed between v2.2.0 and v1.37.0 from
"%-8d%-12s%-18s%-32s%-10s" where the 'SCSI' field did not even exist.
Likely that was the reason for the original Serial lookup in lstape.
As can be seen in the example, at least the HBA device driver string can
contain whitespace and breaks the field numbers with tokenized parsing.
We want to match column 5 (SCSI) but above we would match against the
string 'SCSI' as part of "Virtio SCSI HBA" instead of e.g. '0:0:0:0'.
The following works currently knowing that the last two columns do not
contain white space. But it can also fail if the value of field
'HBA' does not fit into the left-adjusted columns so there is no white
space between columns 'HBA' and 'SCSI' making them collapse:
awk '$(NF-1) == "'$SCSI_ID'" { print $1 }' /proc/scsi/$DEV_NAME
Grep for the SCSI device name as word (to skip names with same substring,
such as 0:0:1:1 also matching 0:0:1:10) and cut the first field 'Number'.
If there is no SCSI column at all (and no SCSI LLDD or other column with a
name accidentally matching an existing SCSI device name), we get no match
and better bail out with the initialized "N/A" for the lstape column
"Device". If the SCSI column exists, the SCSI device names are unique and
we always get at most one match.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lsluns lists nothing and returns with return code 0 if no adapter (FCP
device) or target port exists in sysfs. This can be confusing for the user.
Print a message if no adapter exists. Print a message if no port exists on
any adapter.
Reported-by: Thorsten Diehl <thorsten.diehl@de.ibm.com>
Suggested-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
double free or corruption (out)
Program received signal SIGABRT, Aborted.
0x000003fffdd40404 in raise () from /lib64/libc.so.6
(gdb) bt
#0 0x000003fffdd40404 in raise () from /lib64/libc.so.6
#1 0x000003fffdd41ec2 in abort () from /lib64/libc.so.6
#2 0x000003fffdd88d8e in __libc_message () from /lib64/libc.so.6
#3 0x000003fffdd905c8 in malloc_printerr () from /lib64/libc.so.6
#4 0x000003fffdd98dfa in free () from /lib64/libc.so.6
#5 0x0000000001005994 in util_ptr_vec_free (count=<optimized out>, ptr_vec=0x101de90) at ../include/lib/util_base.h:46
#6 util_scandir_free (de_vec=0x101de90, count=<optimized out>) at util_scandir.c:174
#7 0x00000000010043ce in print_defunct_devices (rec=rec@entry=0x10114f0,
path=path@entry=0x101cc80 "/sys/devices/css0/defunct") at lscss.c:678
#8 0x0000000001004cfe in print_subchannels_of_type (type_requested=type_requested@entry=SUBCHANNEL_TYPE_IO,
rec=rec@entry=0x10114f0) at lscss.c:726
#9 0x0000000001003888 in cmd_lscss () at lscss.c:761
#10 main (argc=<optimized out>, argv=<optimized out>) at lscss.c:932
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
