The commands 'zkey cryptsetup' generates commands for formatting and
opening volumes of type PLAIN and LUKS2.
For LUKS2, if there exists an HMAC key that is associated to the same
volume as the AES key, generate a 'cryptsetup luksFormat' command for
combined encryption and integrity protection. This uses the '--integrity'
and '--integrity-key-size' options of the 'cryptsetup luksFormat'
command to specify the integrity settings.
The volume key specified with '--master-key-file' must contain the
encryption key and the integrity key concatenated to each other. The
size of the volume key specified with '--key-size' however must be the
size of the encryption key only, in bits. The 'cryptsetup luksFormat'
command will internally read the whole file, use the first part as
encryption key, and the second part as integrity key. The size of the
second part must be specified with the '--integrity-key-size'.
Note: This requires 'wrapped integrity key' support in the cryptsetup
package, as well as in the dm-crypt kernel module.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The commands 'zkey integritytab' generates /etc/integritytab entries for
volumes of type INTEGRITY.
The 'zkey integritysetup' generates integritysetup commands for formatting
and opening volumes of type INTEGRITY.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The commands 'zkey crypttab' and 'zkey cryptsetup' should only operate on
AES-type keys, but not on HMAC keys.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
You can only set a sector size for an HMAC key of a volume of type
INTEGTRITY. For combined integrity protection with encryption, the
sector size of a LUKS2 volume must be set on the AES key, but can
not be set on the HMAC key.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For combined integrity protected with encryption, a LUKS2 volume can be
associated to exactly one AES type key and also to exactly one HMAC type
key.
For other volume types, a volume can only be associated to exactly one
key, either an AES type key, or an HMAC type key.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Although HMAC keys can be associated to volumes of type 'LUKS2', the dummy
passphrase can only be set to AES-type keys, i.e. to keys that encrypt the
volume.
Reject trying to set a dummy passphrase for an HMAC key with a volume type
of 'LUKS2'.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Keys of type PVSECRET-HMAC can be associated to volumes of volume type
'INTEGTRITY' or 'LUKS2'.
Volumes of type 'INTEGTRITY' are set up for standalone dm-integrity via
the 'integritysetup' tool. Volumes of type 'LUKS2' are setup for combined
encryption and integrity using the 'cryptsetup' tool using the integrity
option.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add the definitions and utility functions for the PVSECRET-HMAC key type.
A PVSECRET-HMAC key token contains the secret id of a protected
virtualization secret. It does not contain the key material, just a
reference to the key in the ultravisor.
When such a key token is used to perform HMAC operations later on, the
PHMAC kernel cipher will obtain the protected key belonging to this secret
id with the help of the pkey kernel module.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For supporting integrity protected volumes with dm-integrity,
cryptsetup of version 2.8.2 or later is required.
Make cryptsetup of version 2.8.2 a build requirement for zkey, not
only for zkey-cryptsetup. Although zkey could be built with an older
cryptsetup version, the commands that it generates might not work
with older cryptsetup versions.
This makes the compile switch HAVE_LUKS2_SUPPORT superfluous, since
cryptsetup v2.8.2 always includes LUKS2 support. Remove the ifdefs
from the code and update the man pages to not mention LUKS2 support.
Also, starting with cryptsetup version 2.5.0 the luksFormat command
accepts option '--volume-key-file' to specify the volume key file
instead of --master-key-file'. Thus, use '--volume-key-file' in
cryptsetup commands generated by zkey.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Normally, secure keys generated by zkey are intentionally export
restricted. Export restricted keys can not be wrapped with a key
encrypting key (KEK).
However, keys that are generated inside a Secure Execution for Linux
guest that shall also be used outside of the Secure Execution for Linux
guest can only be transported to outside the Secure Execution for Linux
guest by wrapping them with a KEK and unwrapping them outside of the
Secure Execution for Linux guest. For that such keys must be exportable.
Add an option to generate and import exportable secure keys, which then
can be wrapped, and thus transported to outside of a Secure Execution for
Linux guest.
This applies to keys of type 'CCA-AESCIPHER' and 'EP11-AES'. Keys of type
'CCA-AESDATA' are always exportable, and can not be export restricted.
For keys of type 'EP11-AES' additionally allow to set the
'wrap-with-trusted' attribute. This restricts the key so that it only can
be wrapped with a trusted key encrypting key.
For keys of type 'EP11-AES' to be exportable, the access control point
(ACP) XCP_CPB_ALLOW_COMBINED_EXTRACT must be 'ON' on all APQNs used. This
access control point is only supported on newer EP11 firmware levels. If
the access control point is 'OFF' or not supported by the EP11 firmware,
then the IOCTL to generate the key fails with a generic error
(Input/output error - EIO). The zkey tool prints an appropriate error
message in that case.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Keys of type PVSECRET-AES can also be verified via the pkey IOCTL
PKEY_VERIFYKEY2, but the card and domain fields must be zero, because such
a key does not use a crypto card. Also XTS keys of type PVSRCRET-AES are
not represented by 2 concatenated keys but by just one key of type
PVSECRET-AES. Thus, special handling is required for XTS keys.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Jorg Schmidbauer <jschmidb@de.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Keys of type PVSECRET-AES can not be reenciphered using 'zkey reencipher'
or 'zkey-cryptsetup reencipher'. Reject that with a proper error message.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Jorg Schmidbauer <jschmidb@de.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Keys of type PVSECRET-AES can not be generated using 'zkey generate'.
Furthermore, APQNs can not be associated with keys of type PVSECRET-AES
via 'zkey change'. Reject that with a proper error message.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Jorg Schmidbauer <jschmidb@de.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The 'pvsecrets import' command imports a protected virtualization secret
into the zkey key repository. Like other key import or key generation
commands, additional information can be associated with the imported key,
such as a textual description, the volume to encrypt with together with
the volume type, the sector size, and a dummy passphrase. You can not
associate a set of APQNs, since a protected virtualization secret does
not need or use a crypto card.
This command only works when running in a secure execution guest.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Jorg Schmidbauer <jschmidb@de.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The 'pvsecrets list' command lists the available protected virtualization
secrets. By default, only those pvsecret types are listed, that can be used
with zkey. If option '--all/-a' is specified, then all pvsecret types are
listed. Nevertheless, pvsecret types not supported by zkey can not be used
with zkey.
This command only works when running in a secure execution guest.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Jorg Schmidbauer <jschmidb@de.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Ensure that all hyphens in command options and examples are escaped properly.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
For LUKS2 volumes, zkey generates 'cryptsetup luksFormat' commands with
options '--pbkdf argon2i --pbkdf-memory 32 --pbkdf-force-iterations 4'
for low memory and time requirements. Using the default Argon2i options
might cause out-of-memory errors when multiple encrypted volumes are
unlocked automatically at boot through /etc/crypttab.
When the system runs in FIPS mode, which is indicated by file
/proc/sys/crypto/fips_enabled containing '1', the Argon2i password based
key derivation function might be disabled by a policy, and such
'cryptsetup luksFormat' commands might fail.
Generate '--pbkdf pbkdf2' instead if the system runs in FIPS mode.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
cryptsetup 2.1.0 requires excessive amount of RAM (1GB) to luksOpen encrypted
drives (LP: #1820049).
LUKS2 introduced support for Argon2i and Argon2id as a Password-Based Key
Derivation Function (PBKDF).
Argon2 is the winner of Password Hashing Competition and is now officially
recommended by RFC 9106.
PBKDF2 is currently used in zkey to mitigate out-of-memory errors when
multiple LUKS2 volumes are opened automatically via /etc/crypttab.
This patch is to use Argon2i (the deflaut algorithm) as key derivation function
for LUKS2 volumes, but with options for low memory and time requirements.
Using the default Argon2i options might still cause out-of-memory errors.
Link: https://bugs.launchpad.net/ubuntu/+source/cryptsetup/+bug/1820049
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/138
Signed-off-by: Frank Heimes <frank.heimes@canonical.com>
Acked-by: Ingo Franzki ifranzki@linux.ibm.com
[hoeppner@linux.ibm.com: fix whitespace, line break, and commit message]
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The static analysis tool for Debian packages 'lintian', especially if called
like 'lintian -EvIL +pedantic', checks manual pages for correctness and typos.
This commit fixes typos that were identified by lintian and marked with
'typo-in-manual-page' while s390-tools version 2.20.0 was packaged.
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/134
Signed-off-by: Frank Heimes <frank.heimes@canonical.com>
Acked-by: Steffen Maier maier@linux.ibm.com [ziomon]
Acked-by: Ingo Franzki ifranzki@linux.ibm.com [zkey]
[hoeppner@linux.ibm.com: fix commit message]
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Extend zkey to allow to store a (dummy) LUKS2 passphrase together with a
secure key, for use with LUKS2 volumes. That way, when the repository is
backed up, or archived, also the passphrases of the associated LUKS2
volumes are backed up, or archived, and thus can not be forgotten.
This passphrase is then used in generated commands to format and open
the LUKS2 volumes.
Because of the use of secure keys to encrypt the volumes, the LUKS2
passphrase is of no or less relevance for security. It is therefore OK to
store the passphrase in clear text in the key repository, and also use
them in /etc/crypttab. Therefore, the passphrase could actually be a
trivial passphrase, or a dummy passphrase.
Note: Such a dummy passphrase is NOT considered a secret that needs to
be protected. If for a certain usage the passphrase is of relevance for
security, then the zkey dummy passphrase option must not be used to store
the passphrase.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Allow to refresh or update a KMS-bound key in the repository.
The secure key is re-imported from the KMS, and optionally also
its properties are updates from the KMS.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Allow to import keys that exist in a key management system into the
repository. The key together with its properties is imported.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Allow to list the keys managed by a key management system. The keys
are displayed together with the key properties stored in the KMS.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When removing a KMS-bound key from the local repository, call the
KMS plugin and let it perform an action in the KMS. Usually keys are
not removed from key management systems, instead the key state is
changed to non-active or similar.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When key properties are changed with the 'change' command, also update
the key properties in the KMS, if the key is bound to a KMS. Do not
allow to change the associated APQNs for KMS bound keys. KMS bound keys
inherit the APQNs from the KMS plugin.
When a key is renamed in the repository, also update the key name
property in the KMS if the key is KMS bound.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Do not allow to convert a KMS bound key. The key type of a KMS
bound key is determined by what the KMS plugin supports, thus it
can not be converted.
Do only allow to copy a KMS bound key, if the '--local' option is
specified. The result of the copy is a local key, that is not bound
to a KMS.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When a repository that is bound to a key management system, the
keys are generated by the key management system by default. To
generate a local key, add option '--local'.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add the following sub-commands for key management system plugin
handling:
- configure: Configure a KMS plugin
- reencipher: Re-encipher secure keys used by a KMS plugin
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add command 'kms' and the following sub-commands of it to handle
key management system plugin binding and unbinding:
- plugins: List available/configured KMS plugins
- bind: Binds a KMS plugin to the repository
- unbind: Unbinds a KMS plugin from the repository
- info: Displays information about the currently bound KMS plugin
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To support keys that are bound to a key management system (via a KMS
plugin) add new key properties that reflect this. Display if a key is
bound to a KMS with the 'zkey list' and 'zkey validate' commands.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a new 'convert' command. It allows to convert a secure key from
one key type to another. Currently only keys of type CCA-AESDATA can be
converted to CCA-AESCIPHER.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Perform extended checks on a secure key that is imported into
the key repository. Warn the user if the imported key is by
any means insecure, e.g. has been originally created in an
insecure way. Prompt the user to continue the import if a
potential insecurity is detected.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add definitions and helper functions to support the new
CCA-AESCIPHER key type. Also enhance existing helper functions
to support CCA-AESCIPHER keys.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zkey generate command allows to specify the --key-type|-K
option to specify the key type. If not specified, then the
default is CCA-AESDATA.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zkey list command now accepts option --key-type|-K type
to filter the displayed keys by key type. If not specified,
then all key types are displayed.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add option --no-apqn-check to the generate, import, change, and
validate commands to disable checking of the specified APQNs.
With this option a currently non-existing APQN can be associated
with a key. This is useful to associate APQNs that exist only on
other systems, such as disaster recovery systems, but not on the
current system. When generating keys, at least one of the specified
APQNs must be available to generate the key.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
For LUKS2 volumes the cryptsetup command currently generates
'cryptsetup luksFormat' commands, but for plain mode volumes it
generates 'cryptsetup plainOpen' commands.
With the --open option it can now also generate 'cryptsetup luksOpen'
commands for opening LUKS2 volumes. With the --format option you can
limit the generated commands to only generate 'cryptsetup luksFormat'
commands for LUKS2 volumes, and skip plain mode volumes.
The default behavior (i.e. if none of the two options specified),
remains the same as before.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When generating crypttab entries for LUKS2 volumes, allow to
specify common passphrase options like --key-file, --keyfile-offset,
--keyfile-size and --tries and pass those to the generated crypttab
entries.
Note that not all distributions support the keyfile-offset and
keyfile-size options in crypttab entries.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
LUKS2 encrypted volumes use Argon2i as default password based key
derivation function (PBKDF). Argon2i is a so-called memory-hard
function. It requires a certain amount of physical memory to make
dictionary attacks more costly.
Unfortunately, when multiple encrypted volumes are unlocked
automatically during system startup via /etc/crypttab, the use of
Argon2i will most likely cause an out-of-memory error in systemd.
To avoid the out-of-memory error, use PBKDF2 instead. Because PAES
uses secure keys as volume keys, the security of the key derivation
function used to derive the key to encrypt the volume key in the LUKS
key slots is of less relevance. Thus it is safe to use a weaker key
derivation function.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make the error message when the CCA library is missing more
user friendly. Also display an URL where the CCA package
can be downloaded.
The CCA library is used for the REENCIPHER commands of
zkey and zkey-cryptsetup and must be installed separately
as part of the IBM CCA Host Libraries and Tools package.
This packages is not provided by the distributors, but must
be downloaded from an IBM web page and installed separately.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Allow to specify a volume-type for a key. This applies to all
associated volumes. The volume type can be either 'plain' or
'luks2'. New keys created will default to 'luks2', but existing
keys that do not have a volume-type property default to 'plain'
for compatibility reasons.
The volume type 'luks2' is only available when the define
HAVE_LUKS2_SUPPORT is set in the makefile. This is set only
when libcryptsetup version 2.0.3 or newer is available
at build time. If the define is not set, the volume-type
option is not available to the user, and the volume-type of
a key defaults to 'plain'.
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
