Replace memory allocation functions malloc() and calloc()
by counterparts provided in libutil.a library. Also remove error
handling when no memory could be allocated as those functions do
not return.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lshwc displays counter values extracted from the /dev/hwctr device.
The counter values are retrieved using a loop and incremented instead
of just displayed on output.
This leads to the situation where a counter is incremented in large
numbers while the counter triggering program is active. When this
program terminates, the counter should not increase but remain steady.
This is not the case as this example shows:
# lshwc -i 2 -l90 -a :a | fgrep Total | \
awk -F ',' '{print $2 "," $152 "," $157}'
Report time and values of DFLT_ACCESS and DFLT_CC counters
sleep 10
# DFLTCC=1 python3 -c "import zlib; zlib.compress(b'A'*6000000000);
Increment counter DFLT_ACCESS and DFLT_CC, runs about 45 seconds
Output before:
15:24:20,0,0
15:24:22,0,0
15:24:24,0,0
15:24:26,0,0
15:24:28,0,0
15:24:30,0,0
15:24:32,2067027,592996481 <--- python3 program start
15:24:34,6953101,2039012580
15:24:36,14494585,4264340060
15:24:38,24759568,7346128396
....
15:24:56,232929262,70526362509
15:24:58,269037963,81464038124
15:25:00,307757248,93171809261
15:25:02,348900718,105620730492
15:25:04,392646075,118841031269 <--- python3 program stop
15:25:06,438956016,132853968029 <-- Value column two increased by 49148217
15:25:08,488104233,147709011658 <-- Similar high increase
The reason is that lshwc takes the last read counter value and keeps
adding it to the total count, even if there zero delta to the previous
read value. Fix this by clearing the total count value between ioctl()
read operations.
Output after:
15:39:26,0,0
15:39:28,0,0
15:39:30,0,0
15:39:32,0,0
15:39:34,0,0
15:39:36,1367250,380721127 <--- python3 program start
15:39:38,4104791,1108181711
15:39:40,6740994,1858843730
15:39:42,9277545,2646351211
15:39:44,11895180,3444375804
....
15:40:16,54060774,16315924126
15:40:18,57830349,17513712210
15:40:20,61628170,18690791102
15:40:22,65410470,19864086006
15:40:24,69070765,21028646754 <--- python3 program stop
15:40:26,70429758,21472772340 <-- No increase of value in column two
15:40:28,70429758,21472772340
15:40:30,70429758,21472772340
15:40:32,70429758,21472772340
15:40:34,70429758,21472772340
15:40:36,70429758,21472772340
15:40:38,70429758,21472772340
Fixes: 27a562da0a ("cpumf/lshwc: Program to extract complete counter sets")
Reported-by: Axel Busch <Axel.Busch@ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use util_file_read_va() function to read out the event number
given the event file. Also use util_strdup() function to save
the event name. This function terminates on Out Of Memory condition.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
When lshwc is invoked with
# ./lshwc -a :P
lshwc: ioctl S390_HWCTR_START: Invalid argument
#
it returns an error instead of listing all problem state counters
of all online CPUs. The reason is an empty CPU list when it is
omitted and only a counter set is specified. Fix this.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lshwc allows to specify a list of CPUs, for example
# ./lshwc -a 2-3,66-68:b
Date,Time,CPU,CPU_CYCLES(0),INSTRUCTIONS(1),L1I_DIR_WRITES(2),....
2022-01-21,12:51:54,CPU2,68762,20999,283,14157,601,87255
2022-01-21,12:51:54,CPU3,70514,21179,288,10654,586,90188
2022-01-21,12:51:54,CPU4,48504,21018,141,7831,438,78494
2022-01-21,12:51:54,Total,187780,63196,712,32642,1625,255937
#
However, as seen on the output, the CPU list is incorrect. It shows
CPUs 2, 3 and 4 even when only CPU 2 and 3 was requested. CPUs 66, 67
and 68 have not been online and can not be displayed.
What happens is a wrong parameter conversion for the device driver.
CPUs 66, 67 and 68 are passed to the device driver as CPUs 2 3 and 4
and that data is returned.
Fix this and submit a CPU list with correct bit ordering:
# ./lshwc -a 2-3,66-68:b
Date,Time,CPU,CPU_CYCLES(0),INSTRUCTIONS(1),L1I_DIR_WRITES(2),...
2022-01-21,12:59:18,CPU2,50753,18042,246,10972,494,60345
2022-01-21,12:59:18,CPU3,54002,20390,232,9219,511,66033
2022-01-21,12:59:18,Total,104755,38432,478,20191,1005,126378
#
Reported-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With gcc < 8.1 the following compile error occurs:
lshwc.c:52:37: error: initializer element is not constant
static unsigned int read_interval = ioctlsleep, cfvn, csvn, authorization;
^~~~~~~~~~
Even though this gcc bug was fixed in gcc 8.1+, change the constant
definition to a #define to make the tool compile with older compilers as
well.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69960
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66618
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use LONG_BIT provided by C standard in <limits.h>.
Fixes the following compile errors with buildroot:
lshwc.c: In function ‘parse_cpulist’:
lshwc.c:295:15: error: ‘__BITS_PER_LONG’ undeclared (first use in this function)
295 | no_a = i % __BITS_PER_LONG;
| ^~~~~~~~~~~~~~~
Fixes: 27a562da0a ("cpumf/lshwc: Program to extract complete counter sets")
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use standard 32- and 64-bit C types.
Fixes the following compile errors with buildroot:
In file included from lshwc.c:41:
lshwc.h:61:2: error: unknown type name ‘__u64’
61 | __u64 version; /* Version of interface */
| ^~~~~
lshwc.h:62:2: error: unknown type name ‘__u64’
62 | __u64 data_bytes; /* # of bytes required */
| ^~~~~
lshwc.h:63:2: error: unknown type name ‘__u64’
63 | __u64 cpumask_len; /* Length of CPU mask in bytes */
| ^~~~~
lshwc.h:64:2: error: unknown type name ‘__u64’
64 | __u64 *cpumask; /* Pointer to CPU mask */
| ^~~~~
lshwc.h:65:2: error: unknown type name ‘__u64’
65 | __u64 counter_sets; /* Bit mask of counter set to get */
| ^~~~~
lshwc.h:69:2: error: unknown type name ‘__u32’
69 | __u32 set; /* Counter set number */
| ^~~~~
Fixes: 27a562da0a ("cpumf/lshwc: Program to extract complete counter sets")
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Program reads complete counter sets from any CPU by opening
device /dev/hwctr which is available with linux version 5.12.
The counter sets and CPUs can be specified on the command line.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Thomas Richter