Introduce the new state 'unauthorized' to the three already existing
states disabled, enabled, and unsupported to CPU-MF counters.
CPU-MF counters are only available on LPARs.
The intent is to differentiate whether a system simply does not support
the CPU-MF counters like a z/VM guest or if they are supported like on
LPAR but have to be authorized via HMC/SE.
Signed-off-by: Finn Callies <fcallies@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
[hoeppner@linux.ibm.com: Adapt commit message]
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Relocated the perf_event_open logic into a shared helper to eliminate
redundant implementations across multiple files. Enhances consistency,
reduces maintenance overhead, and lowers structural complexity.
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The tooling already supports the PAI counters to the respective CPACF
functions introduced with MSA 10 and MSA 11 but the manpage did not
reflect that until now. The list of pai counters is moved to a new
section called APPENDIX to not block any important information with the
list.
Additionally a few double space after end of sentences are removed.
Acked-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
MSA 10 and MSA 11 introduce new function codes containing Full XTS
functions for KM instruction and HMAC functions for KMAC instruction.
Additional Full XTS and HMAC for PCKMO instruction is introduced.
Signed-off-by: Finn Callies <fcallies@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This adds the counter numbers to the corresponding counter names to the
cpacfstats output. This aims to ease using this tool with other related
tools which may use other names for the counters.
Signed-off-by: Finn Callies <fcallies@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Up until now cpacfstats assumes that on the running hardware either all
PAI and CPUMF are available or non at all. Which counters are supported
may be hardware dependent and can vary in the future. With
this commit cpacfstats dynamically loads the counters from sysfs entries
in (/sys/devices/pai_crypto/events/) and (/sys/devices/cpum_cf/events/)
respectively.
Additionally cpacfstats has a new way of determining which PAI counters
are meant for kernel usage.
Signed-off-by: Finn Callies <fcallies@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Do not fail to start the daemon if no crypto counters are supported, as
there is still a use case for the daemon to run, as the user can then
use the 'cpacfstats' tool to evaluate that no counter stats are
available. Previously, the user had to check the syslogs for the reason
why the daemon was not running and the cpacfstats command failed.
Before this change:
$ cpacfstats
cpacfstats: Can't access domain socket file '/run/cpacfstatsd_socket', errno=2 [No such file or directory]
cpacfstats: Maybe cpacfstatsd daemon is not running ???
cpacfstats: Can't connect to daemon
After this change:
$ cpacfstats
des counter: unsupported
aes counter: unsupported
sha counter: unsupported
rng counter: unsupported
ecc counter: unsupported
pai_user : unsupported
pai_kernel : unsupported
Also, it's no good practice to let systemd services fail, because
otherwise the system state will be shown as 'degraded':
$ systemctl status
* a46lp59
State: degraded
Jobs: 0 queued
Failed: 1 units
$ systemctl list-units --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
* cpacfstatsd.service loaded failed failed CPACF statistics collection daemon process for Linux on System z
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
There are only two users of the `cleanup` label, so let's replace the
goto statements with the label code. This makes the code easier to read.
Especially since another label will be introduced in the next commit.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add virtual counters pai_user and pai_kernel to detail all Processor Activity
Instrumentation (PAI) counters in user resp. kernel space. Once activated,
they will show all counters for the corresponding set. Add option -n to limit
the display to only non-zero counter values.
Add support for cpu hotplug events based on libudev. CPU hotplug events are
used to either detach from a vanishing CPU or (re-)attach to a (re-)appearing
CPU. In that case, a "hotplug detected" virtual counter is set to a non-zero
value to indicate possible loss of counters which happens when CPACF is used
on the CPU before cpacfstatsd could attach to it. The hotplug indication is
cleared once all counters are deactivated.
Add support for JSON output. The JSON document is an array of JSON objects
representing the counters and their values. Every object has a name (property
"counter") and a value (property "value"). For PAI counters, the counters
also have a space (property "space") determining the counter set pai_user or
pai_kernel, and a numeric id (property "counterid") that can be used to filter
the JSON document.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-By: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
cpacfstatsd now correctly handles offline cpus and dynamically attaches to
cpus once they get online. If events are enabled when a hotplug event
occurs, cpacfstatsd uses a pseudo-counter to notify user applications about
the occurence of this event and a potential data inaccuracy.
cpacfstats shows if a hotplug event has been detected since at least one
counter was activated. As soon as all counters are deactivated, the
hotplug detection state is reset.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-By: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The cpacfstats daemon is susceptible to dos attacks from malicious clients
that connect but either do not send a query or receive an answer fast
enough. The latter currently is impossible but might occur once we
introduce further counters.
Solve both problems by exploiting a timed read/write operation in the
daemon and close the connection on timeout.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-By: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
libpfm does not yet include counters introduced with z15 in a release.
cpacfstatsd now implements its own counter logic to become independent
of the slow release cycles of libpfm.
Reviewd-By: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewd-By: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
z15 architecture supports counters for ECC operations. We now add and evaluate
these counters on supported architectures. If ECC counters are not supported,
we simply print "unsupported" for ECC counter values.
Manpages adapted accordingly.
Signed-off-by: Juergen Christ <juergen.christ@ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The newer perf_event_open syscall needs a struct
perf_event_attr with the size field set correctly. Older
versions did not even provide this field. However, this
field is now set to the correct size value.
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
This commit is based on the s390-tools-1.39.0 version.
Changes on top of s390-tools-1.39.0:
- Add MIT license to all source files
- Add LICENSE file
- Transform REAMDE to README.md (markdown)
- Add AUTHORS.md file
- Add CONTRIBUTING.md file
- Move changelog from README to CHANGELOG.md file
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
