Reported by GCC 9.2.1 when building with '-Wmaybe-uninitialized'.
job.c: In function 'job_get':
job.c:1817:14: warning: 'filename' may be used uninitialized in this function [-Wmaybe-uninitialized]
1817 | scan_size = scan_file(filename, &scan);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
job.c:1791:14: note: 'filename' was declared here
1791 | const char *filename;
| ^~~~~~~~
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reported by GCC 9.2.1 when building with '-Wdiscarded-qualifiers'.
job.c: In function 'get_job_from_config_file':
job.c:1810:14: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In the BLS files, the 'linux' and 'initrd' fields are relative to the
$BOOT directory. If $BOOT is a mount point of boot partition, 'linux'
and 'initrd' fields are relative to boot partition. If not, the paths
are relative to $BOOT directory of root partition.
zipl always starts searching at / regardless of partitions and mount
points.
This commit extends the semantics of target= field in zipl.conf to make
it as a second search path, besides /, for those 2 BLS fields.
See issues #69 for more details.
Fixes: https://github.com/ibm-s390-tools/s390-tools/issues/69
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/74
Signed-off-by: Tuan Hoang <tmhoang@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zipl config file (zipl.conf) and the BootLoaderSpec (BLS) fragments
in /boot/loader/entries define a set of tokens that are parsed by zipl.
These are stored in an array of tokens whose size is calculated to make
sure that there is enough memory allocated for all the scanned tokens.
But the size calculation logic was wrong, since it was checking if the
current size was enough to store a single token per BLS fragment, while
up to 4 tokens can be defined in a BLS file: a section heading and the
image, ramdisk and parameter keywords.
This led to zipl being killed by a SIGABRT signal when trying to parse
more tokens than the ones that could fit in the scanned tokens array:
Using config file '/etc/zipl.conf'
Using BLS config file '/boot/loader/entries/vmlinuz-9.conf'
Using BLS config file '/boot/loader/entries/vmlinuz-8.conf'
Using BLS config file '/boot/loader/entries/vmlinuz-7.conf'
Using BLS config file '/boot/loader/entries/vmlinuz-6.conf'
Using BLS config file '/boot/loader/entries/vmlinuz-5.conf'
Using BLS config file '/boot/loader/entries/vmlinuz-4.conf'
Using BLS config file '/boot/loader/entries/vmlinuz-3.conf'
Using BLS config file '/boot/loader/entries/vmlinuz-2.conf'
Using BLS config file '/boot/loader/entries/vmlinuz-1.conf'
Using BLS config file '/boot/loader/entries/vmlinuz-0.conf'
double free or corruption (out)
Aborted (core dumped)
Fixes: https://github.com/ibm-s390-tools/s390-tools/issues/68
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/73
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
...
==9448== 32 bytes in 1 blocks are definitely lost in loss record 1 of 3
==9448== at 0x4831010: malloc (vg_replace_malloc.c:309)
==9448== by 0x48E2205: __vasprintf_internal (vasprintf.c:71)
==9448== by 0x1005061: misc_asprintf (misc.c:48)
==9448== by 0x10131F3: disk_get_info (disk.c:239)
==9448== by 0x1013C41: disk_get_info_from_file (disk.c:517)
==9448== by 0x1011C87: bootmap_create (bootmap.c:1127)
==9448== by 0x1004C73: main (zipl.c:192)
...
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The zfcp dumper fails with the following error:
MLOPDM003I: Machine loader finished, moving data to final storage
location.
uncompression error
--- System halted
HCPGIR450W CP entered; disabled wait
PSW 00020001 80000000 00000000 DEADBEEF
The zipl command shows overlapping components when installing the dumper
to a zfcp disk:
zipl -d /dev/sda1
Building bootmap directly on partition '/dev/sda1'
Adding dump section
kernel image......: /lib/s390-tools/zfcpdump/zfcpdump-image
kernel parmline...: 'root=/dev/ram0 dump_mem=1 possible_cpus=1
cgroup_disable=memory '
component address:
heap area.......: 0x00002000-0x00005fff
stack area......: 0x0000f000-0x0000ffff
internal loader.: 0x0000a000-0x0000dfff
parameters......: 0x00009000-0x000091ff
kernel image....: 0x00010000-0x005761ff
^^^^^^
parmline........: 0x00567000-0x005671ff
^^^^^^
Preparing boot device: sda.
Done.
With the secure IPL patchset the offset of the kernel image has been
removed for the normal IPL case but it has not been removed for the dump
image which leads to the overlap of 0x10000.
Fix by removing the offset for the dump case.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewd-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Tested-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently the zipl tool doesn't remove trailing spaces from the BLS field
values. So for example if a 'title' field has trailing spaces and is used
as the default, zipl will complain that there's no section with that name:
Using config file '/etc/zipl.conf'
Using BLS config file '/boot/loader/entries/f871a0cf218348c5ba921f61c92b7eac-4.18.0-80.20.el8.s390x.conf'
Using BLS config file '/boot/loader/entries/f871a0cf218348c5ba921f61c92b7eac-0-rescue.conf'
Error: Config file '/etc/zipl.conf': Line 6: no such section 'Red Hat Enterprise Linux (4.18.0-80.20.el8.s390x) 8.1 (Ootpa)'
Since the trailing spaces are also removed from the fields defined in the
zipl.conf file, do the same for the ones that are defined in the BLS file.
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/62
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
bootmap.c: In function ‘check_secure_boot_support’:
bootmap.c:131:2: warning: ignoring return value of ‘fscanf’, declared
with attribute warn_unused_result [-Wunused-result]
fscanf(fp, "%d", &val);
^~~~~~~~~~~~~~~~~~~~~~
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use the newer and more robust libutil provided function
util_sys_get_dev_addr() to identify a device address for any former user
of u2s_getbusid().
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The firmware needs to know which memory locations are used by
the stage 3 loader so that it can allocate its own memory.
To indicate the usage of the heap and stack area of the stage 3 loader
add a dummy component to block this memory area for the firmware.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a command line option and configuration section keyword to control
the zIPL secure boot support. This option is named "secure" and can take
one of three values:
auto (default)
Write signatures if available and supported by the system.
1
Signatures are written independent of support indicated by the local
system. Also missing signatures for stage 3 and kernel IPL files
will result in an error.
0
No signatures will be written.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support for parsing IPL file signatures as produced by the Linux
kernel's sign-file tool. When preparing a disk for IPL, the signatures
will be added as separate data components that can be used by the Secure
Boot firmware feature to validate the integrity of the IPL files.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Change the fixed component entry text array to a more dynamic approach
to allow easier extension and make the order changeable.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The first component that gets control after IPL is the zIPL-provided
stage 3 boot loader. This boot loader is based on a binary image linked
into the zIPL executable. When preparing a disk for IPL, zIPL updates
runtime parameters in the boot loader image and writes the resulting
data to disk.
To support the Secure Boot firmware feature, the stage 3 code must be
signed, and can therefore no longer contain variable parameter portions.
Also the boot loader image should be accessible as a separate file to
enable the use of external programs for creating the signature.
This patch moves the stage 3 boot loader code to an external file
location and splits out the parameter portion into a separate, unsigned
on-disk component.
The new memory layout of the stage 3 loader during its execution looks
as follows:
* 0x0000-0x1fff Lowcore
* 0x2000-0x5fff Memory allocation (heap)
* 0x7000-0x8fff free
* 0x9000-0x9fff Stage3 parameter
* 0xa000-0xcfff Stage3 code
* 0xd000-0xefff Section: bss, rodata, data
* 0xf000-0xffff Stack
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The binary Linux kernel image is built to be loaded to memory address
0x0 but the first 64 kbyte contain an IPL header that is not used for
disk IPL. zIPL strips away this IPL header when writing IPL records to
disk, loads the remaining data to memory address 0x10000 and uses the
memory area below that for its own boot loader code.
The Secure Boot firmware feature checks the integrity of an installed
image during IPL using a checksum that was generated for the full image.
Since the checksum becomes invalid if the IPL header is removed, zIPL
must be changed to write the full image to disk.
This patch modifies the zIPL logic to no longer strip away the IPL
header. Instead the full image is loaded to a higher memory address and
relocated by the stage 3 boot loader code to its final location.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Most bootloaders use the BootLoaderSpec "title" field to name the entries
in their boot menu. The zipl bootloader used the "version" field instead,
since it was wrongly assumed that the zipl boot menu didn't support names
that contained spaces, which are usually present in a BLS "title" field.
But this is not the case, names with space characters are supported by the
IPL and is just a constraint of the section heading in the zipl.conf file.
So to be consistent with all the other bootloaders, use the "title" field
also on zipl when populating the boot menu entries from BLS files.
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/47
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Stefan Haberland sth@linux.ibm.com
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The strlcpy() implementation in libu2s is beneficial for other tools as
well. Move the implementation to libutils and replace misc_strlcpy() in
libu2s accordingly.
Change the link order in zipl to make it build again.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use misc_asprintf() for concatenating strings and get rid of the
following GCC8 compile warnings:
disk.c: In function ‘disk_get_info’:
disk.c:247:43: warning: ‘%d’ directive output may be truncated writing
between 1 and 11 bytes int o a region of size between 0 and 79
[-Wformat-truncation=]
snprintf(ppn_cmd, sizeof(ppn_cmd), "%s %d:%d",
^~
disk.c:247:39: note: using the range [-2147483648, 2147483647] for
directive argument
snprintf(ppn_cmd, sizeof(ppn_cmd), "%s %d:%d",
^~~~~~~~~~
disk.c:247:39: note: using the range [-2147483648, 2147483647] for
directive argument
disk.c:247:4: note: ‘snprintf’ output between 5 and 104 bytes into a
destination of size 80
snprintf(ppn_cmd, sizeof(ppn_cmd), "%s %d:%d",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
script_file, major(stats.st_rdev),
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
minor(stats.st_rdev));
~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Using the DATA_SIZE() macro gets rid of the following GCC8 compile
warning:
boot.c: In function ‘boot_init_fba_stage0’:
boot.c:120:2: warning: ‘memcpy’ forming offset [2, 152] is out of the
bounds [0, 1] of object ‘_binary_fba0_bin_start’ with type ‘char’
[-Warray-bounds]
memcpy(stage0, DATA_ADDR(fba0), sizeof(*stage0));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from boot.c:18:
../boot/data.h:24:13: note: ‘_binary_fba0_bin_start’ declared here
extern char _binary_fba0_bin_start;
^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zipl currently uses the FIBMAP ioctl to map blocks for the bootloader;
on XFS, if FIBMAP is requested on a reflinked file, it will fail -
and FIBMAP returns 0 in this case, which is indistinguishable from a
hole. This causes boot to fail because the file is not mapped.
We can use the FIEMAP ioctl instead, which is able to map reflinked
files. While FIEMAP is able to map entire extents at once, here we
simply use it to obtain the mapping block-by-block so that it fits
in with the current FIBMAP calls.
Fixes: https://github.com/ibm-s390-tools/s390-tools/issues/34
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/36
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Tested-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Building zipl from outside the zipl/ sub-directory fails due to a
missing dependency:
# cd s390-tools
# make -C zipl/src/ zipl
boot.c:18:10: fatal error: ../boot/data.h: No such file or directory
#include "../boot/data.h"
This is because boot/data.h needs to be generated before src/boot.c can
be compiled. Fix this by adding the missing dependency to the zipl
Makefile.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In the zipl Makefile macros are defined with the sole purpose to define
other macros in zipl.h. Remove this unnecessary indirection.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The file system dumper no longer exists. So there is no need in keeping
'PART' to distinguish between the file system and the partition dumper.
Adjust the macro name to the usage in zipl by removing 'PART'.
While at it also adjust the file names the macros stand for.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The macro names are a mixture of the original file system dumper (FSDUMP)
and its extension to cut the file system and write directly to a partition
(PART). The original dumper no longer exists and today the feature is
called zfcpdump. Prevent confusion by renaming the macros to fit todays
usage.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The BootLoaderSpec (BLS) defines a file format for boot configurations,
so bootloaders can parse these files and create their boot menu entries
by using the information provided by them [0].
This allow to configure the boot items as drop-in files in a directory
instead of having to parse and modify a bootloader configuration file.
If the /boot/loader/entries exists and there are BLS files there, then
these are parsed and configuration sections are added without the need
to have these in a zipl.conf file.
A different BLS directory can be specified from the command line using
the --blsdir option.
[0]: https://www.freedesktop.org/wiki/Specifications/BootLoaderSpec/
GitHub-ID: #28
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The function returns 0 on success and a negative number on error but is
useful to know how many tokens were allocated. This will be used by the
BLS parsing code to determine if needs to allocate mor tokens or not to
parse the BLS fragments.
GitHub-ID: #28
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update zipl DASD standalone dumpers for single-volume, multi-volume and FBA
to drop the sets of zero pages when dumping memory to disk. Thus, all
continuous sets of zero-megabytes in the memory are dropped during the dump
stage.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix some warnings found by sparse.
Declare one function static and change static variables to defines.
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Remove unused include to fix an error reported by make C=1.
CHECK zipl/src/zipl_helper.device-mapper.o
../../include/lib/dasd_base.h:159:20: error: redefinition of struct hd_geometry
../../common.mak:234: recipe for target 'zipl_helper.device-mapper.o' failed
make: *** [zipl_helper.device-mapper.o] Error 1
The structure hd_geometry is defined in dasd_base.h.
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Compilers in Debian and Ubuntu default to enabling PIE for all binaries.
This is a poor fit for boot loader code that has strict requirements
for its layout. Hence always forcefully disable PIE.
As older compilers still need to be supported, no-pie usage is
conditional on CC's -dumpspecs output.
Fixes: #3
Signed-off-by: Philipp Kern <pkern@debian.org>
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
dasdview command does not accept the '-f' option so because of that the
command will always fail.
Fixes: #10
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Acked-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
This commit is based on the s390-tools-1.39.0 version.
Changes on top of s390-tools-1.39.0:
- Add MIT license to all source files
- Add LICENSE file
- Transform REAMDE to README.md (markdown)
- Add AUTHORS.md file
- Add CONTRIBUTING.md file
- Move changelog from README to CHANGELOG.md file
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
