`genprotimg` can be useful on non-s390x architectures such as x86 or
arm. Therefore add `genprotimg` to the non-s390x target list.
How to build genprotimg on a non-s390x system (s390x cross-compiler
required)
$ # Build and install /usr/bin/genprotimg
$ make -C genprotimg
$ make install -C genprotimg
$ # Build and install the genprotimg bootloaders
$ make -C genprotimg/boot HOST_ARCH=s390x CROSS_COMPILE=s390x-linux-gnu-
$ make install -C genprotimg/boot HOST_ARCH=s390x CROSS_COMPILE=s390x-linux-gnu-
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
A subset of s390 tools can be useful on non-s390x architectures such as
x86 or arm. Limit the build targets for these architectures with
'pvattest' and 'libpv' as the first candidates.
A cross compilation on x86 for s390x will still build the entire package
provided that the HOST_ARCH variable is set properly:
$ make HOST_ARCH=s390x CROSS_COMPILE=s390x-linux-gnu-
Cross compilation on s390x for x86 will limit the build targets as
described:
$ make HOST_ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-
Co-developed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Introduce `BUILD_ARCH` and `(CC|LINK|...|OBJDUMP)_FOR_BUILD` variables
in order to properly support the build of tools that generate code or
data during the build process. Replace existing variables `HOSTCC` with
`CC_FOR_BUILD` and `HOSTCFLAGS` `CFLAGS_FOR_BUILD`. The Makefile
variables for the `HOST_ARCH` are unchanged.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
`pkg-config` is a well established tool and all of our required
libraries do provide .pc files. Therefore let's declare `pkg-config` as
required and use it. In addition, remove now useless code.
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
changes in opencryptoki setup do require some modifications:
- "pkcsconf -mlist" does no longer work in a combined format
- config files have changed
- ep11info was not yet collected
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
generalize the collection step name from "docker" to "container host"
initial version of adding data collection for OCP.
all log file content might be too much for most installations
Reviewed-by: Alexander Klein <alkl@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Reviewed-by: Mike Storzer <mstorzer@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
some versions of /bin/dash do interpreted our commands different, which
causes a variable failure and termination of the script.
e.g. a new line char "\n" will split the cmd_type to a multiple line variable
not working with the followup commands. adding the head command does avoid
multiline variables now.
Problem found in Ubuntu 20.4 and some older Ubuntu versions
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
we do miss a simple way to see the dbginfo.sh version used by the
customer for the debug generation. saving the version now to dbginfo.log
Reported-by: Mike Storzer <MSTORZER@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This can now include /lib/modprobe.d/10-unsupported-modules.conf
Strictly speaking, modprobe would only consider *.conf files inside
those directories, but for consistency with the already existing
collection of /etc/modprobe.d instead of /etc/modprobe.d/*.conf,
do the same for the added missing locations.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The "detour" with NUL terminated records ensures that sorting
works as expected for environment variables with values containing
one or more lines and thus '\n' as regular record separator.
Reviewed-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
On several distributions `pandoc` is not available via the default
repositories, and thus not available in the build environments for the
distribution packages. That means, the man page can't be bundled along
with the packages generated for those distributions.
But since this is a valuable asset for some users, instead of requiring
`pandoc` in order to have a man page be generated during the build, so it
can be installed, bundle a pre-cooked version that corresponds to the
current version of the `README.md` file. This way, the man page can always
be packaged, and is now always installed, even if `ENABLE_DOC` is set to
`0` (the default).
This also means, whenever the `README.md` file is changed, the bundled
man page needs to be regenerated, so it stays in sync. As a safeguard
we also add a checksum of the `README.md` file that is regenerated along
with the man page. This checksum is tested even when `pandoc` is not
available, and the user is notified whenever it runs out of sync (with a
hint as to how to remedy it).
Nothing changes for the compile/installation workflow, if `ENABLE_DOC` is
set to `1`.
Suggested-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
'which' tool is packaged separately from other core tools and there will
likely be scenarios where this check will fail because 'which' is
unavailable.
The "type" is builtin itself and should solve this problem.
For a built in command, we will not suppress error out -> removing 2>&1.
On this replace - in call_run_command - get cmd_type as variable only once
Reported by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Remove the call to `gzip` before installing the manpage during the
`make install` call. What and if compression is done should be handled by
the distribution tooling.
This also removes a dependency for the build process.
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a README.md for chreipl-fcp-mpath and infrastructure to build and
install a man page generated from the README.md. Building and installing
of the man page is only done when supplying the make option `ENABLE_DOC=1`
(per default disabled). The `pandoc` utility is used to build the man page.
The README.md is reused since there is no other tool or command as part of
chreipl-fcp-mpath that needs to be documented in a separate man page.
Also add information about chreipl-fcp-mpath to the main README.md and
CHANGELOG.md.
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
running mpio data disks with offline paths might cause dbginfo
to hang up on the command "blockdev --report" -> we remove
it to ensure a non blocking data collection.
In addition we add a second kill step with the same timeout
value to retry stopping a command
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Reviewed-by: Mario Held <mario.held@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- clenaup outdated kernel - we no longer have 2.x kenrel in support
- add timeout on command excution - ensure to not miss all data for a
single command to hang
Signed-off-by: Joern Siglen <siglen@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Zipl.conf is collected via /etc/*.conf in CONFIGFILES but BLS snippets
do not appear in /etc/zipl.conf.
Complements v2.5.0 commit d280e5b1fa ("zipl: Add BootLoaderSpec support")
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add the genprotimg flags `--(enable|disable)-pckmo` flag to enable/disable the
support for PCKMO-encrypt-DEA/TDEA/AES/ECC-key functions.
Acked-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Allow the PCKMO-encrypt-DEA/TDEA/AES/ECC-key functions to be used in a protected
virtualization guest by default.
Acked-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Steffen Eiden