Also mark FCP devices with CHPID that is logically varied off,
e.g. after running "chchp -v 0 60".
Such FCP devices can be online, not failed, and are not defunct,
so the other existing markers do not appear.
Shows potential issues with FCP devices at one glance.
Examples:
$ lszfcp -He
0.0.1900 host0 NotAvailable
$ lszfcp -HeV
/sys/devices/css0/0.0.010d/0.0.1900 NotAvailable
/sys/class/fc_host/host0
/sys/class/scsi_host/host0
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Complements: 4036e80b26 ("lszfcp: add new output marker for non-good FCP devices (hosts)")
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
I often use "systool -v -m zfcp" but that's a bit longish to type
and contains more output than just the parameters I'm interested in.
"tail /sys/module/zfcp/parameters/*" is also not so nice.
"lszfcp -Z" makes it very easy and can be combined with the other
existing output options of lszfcp.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Since zfcp lazily allocates Scsi_Host et al. on setting an FCP device
online for the first time since the last driver core bind to zfcp
(such as zfcp kernel module load),
lszfcp has only been showing FCP devices (vHBAs) that have been online
at least once including those that have been set offline again.
This is somewhat confusing.
Also it would be nice if lszfcp could be an easier to type replacement for
"lscss -t 17032/03" to simply show all devices bound to the zfcp device
driver.
Of course those FCP devices that have never been online, won't have any
zfcp-specific attribute details, only CIO attributes from the CCW bus.
They also do not have a Scsi_Host nor fc_host.
In order not to break any scripting or expectations around lszfcp,
make the new feature depend on the extended output command line option.
Example:
$ lszfcp -He
0.0.1880 - offline
$ lszfcp -HeV
/sys/devices/css0/0.0.010b/0.0.1880 offline
-
-
$ lszfcp -Hea
0.0.1880 - offline
Bus = "ccw"
availability = "good"
cmb_enable = "0"
cutype = "1731/03"
devtype = "1732/03"
modalias = "ccw:t1731m03dt1732dm03"
online = "0"
uevent = "DRIVER=zfcp"
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
s390-tools-1.8.1 introduced a new error message.
It gave the same and thus misleading error message as if no FCP device
(vHBA) found.
In order not to break any scripting built around lszfcp output,
only print the fixed error message depending on the extended output
command line option.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
s390-tools-1.8.0 introduced a regression skipping all FCP devices
that are currently "defunct".
Changing
$SYSFS/devices/css0/*/*/host*
to
$SYSFS/devices/css0/[0-9]*/[0-9]*/host*
was too strict as it won't match
$SYSFS/devices/css0/defunct/[0-9]*/host*
anymore.
Fix:
$SYSFS/devices/css0/[0-9d]*/[0-9]*/host*
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
s390-tools-1.8.1 introduced a regression skipping all fc_rports
with port_state != Online. While we need to skip some output parts
for a zfcp_port which does not exist anymore due to port_remove,
there are other cases with port_state != Online for which we should
not skip an fc_rport.
Such as port_state "Blocked" after a cable pull beyond host-adjacent switch
or port_state "Not Present" after dev_loss_tmo ran out.
This way the user can see the previously discovered ports,
even if they might currently not be usable for traffic.
Non-good ports are marked in the short output with suffix "NotOnline".
In order not to break scripting or expectations around lszfcp, make the new
feature depend on the extended output command line option.
Sysfs path globbing does not work for a removed zfcp_port
to obtain the FCP device bus-ID. Instead, properly walk the sysfs.
Examples with a removed zfcp_port:
$ lszfcp -Pe
0.0.50c0/0x500507680b2481fa rport-6:0-2
$ lszfcp -PeV
- (NoMoreZfcpPort:0.0.50c0/0x500507680b2481fa)
/sys/class/fc_remote_ports/rport-6:0-2
Examples with an existing zfcp_port but pulled fibre:
$ lszfcp -Pe
0.0.3c40/0x500507680b2181fb rport-7:0-4
$ lszfcp -PeV
/sys/devices/css0/defunct/0.0.3c40/0x500507680b2181fb
/sys/class/fc_remote_ports/rport-7:0-4
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Used in subsequent patches to guard their changes in order not to break
any scripting or expectations around the lszfcp output format.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This commit is based on the s390-tools-1.39.0 version.
Changes on top of s390-tools-1.39.0:
- Add MIT license to all source files
- Add LICENSE file
- Transform REAMDE to README.md (markdown)
- Add AUTHORS.md file
- Add CONTRIBUTING.md file
- Move changelog from README to CHANGELOG.md file
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Steffen Maier