Add support to report Fibre Channel (FC) Endpoint Security
related information for zfcp-host and zfcp-lun devices.
Allow to query (lszdev) and provide help for (chzdev) the FC Endpoint
Security capability of a FCP device (zfcp-host). Provide this
information by defining the FCP device attribute fc_security in zdev
zfcp-host.
Allow to query (lszdev) and provide help for (chzdev) the FC Endpoint
Security in use on a connection between a FCP device and a FC remote
port. Provide this information by introducing a virtual zdev zfcp-lun
attribute fc_security. It returns the fc_security attribute value of
the zfcp port object representing the FC remote port used to access the
LUN.
This approach allows users of lszdev to easily query the FC Endpoint
Security in use on the connections to one or more FCP LUNs. It also
does not require the effort to introduce a zfcp-port device type in
zdev.
The fc_security attribute help for both zfcp-host and zfcp-lun can be
queried for example as follows:
chzdev zfcp --help-attribute
The fc_security attribute values and path of all active zfcp devices
can be queried for example as follows:
lszdev zfcp -a -c TYPE,ID,ATTR:fc_security,ATTRPATH:fc_security
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
As preparation for a following commit reorder the path logic in function
zfcp_lun_st_get_active_attrib_path(). This then allows to handle
subsequent special cases more easily. Additionally it also enhances the
readability of the expression.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Enable user to specify that a device should be configured early, that is
during the initial RAM-disk boot phase. This may be necessary, e.g. to
override auto-configuration for a device which is also applied during
that boot phase. It may also be used to manually specify devices that
are required to access the root file system, such as networking devices.
Users can mark devices as requiring early configuration by specifying
a value of 1 for the newly added internal attribute zdev:early:
# chzdev dasd-eckd 0.0.1234 -p zdev:early=1
This can be changed back by removing the attribute setting, or by
setting the attribute value to 0:
# chzdev dasd-eckd 0.0.1234 -p -r zdev:early
or
# chzdev dasd-eckd 0.0.1234 -p zdev:early=0
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Auto-configuration is the name of a new configuration target that is
supported by chzdev and lszdev besides the existing active and
persistent configuration targets. Directives created in this new
configuration are stored as udev rules in the /run/udev/rules.d
directory.
Auto-configuration directives are only in effect if there are no
directives for the same device in the user-provided persistent
configuration. This allows users to override auto-configuration
directives if necessary.
Due to the volatile nature of the /run directory, auto-configuration
directives are cleared on reboot. Therefore mechanisms that generate
auto-configuration directives must recreate them on every boot.
The lszdev tool displays auto-configuration data both in list view
as well as in detail view. Users can specify the new option --auto-conf
to only show data from this configuration target.
Mechanisms that generate automated configuration directives can use
chzdev together with the --auto-conf option to create the corresponding
udev rules.
Note: This change does not include a mechanism that generates
auto-configuration directives.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This commit is based on the s390-tools-1.39.0 version.
Changes on top of s390-tools-1.39.0:
- Add MIT license to all source files
- Add LICENSE file
- Transform REAMDE to README.md (markdown)
- Add AUTHORS.md file
- Add CONTRIBUTING.md file
- Move changelog from README to CHANGELOG.md file
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Jens Remus