Fix the support for staged installs. The Makefile variable `PKGDATADIR`
uses `DESTDIR` for all Makefile target, but actually it should only be
used for the `install*` and `uninstall*` targets. [1] Fix this by using
`DESTDIR` only for `install*` targets - uninstall* targets are not
supported by s390-tools.
Before this change, if `DESTDIR` was set for staged installs,
`genprotimg` has tried to find the bootloader binaries at the temporary
installation path `$DESTDIR$(TOOLS_DATADIR)/genprotimg/` instead of
`$(TOOLS_DATADIR)/genprotimg`.
[1] https://www.gnu.org/prep/standards/html_node/DESTDIR.html
Fixes: 65b9fc442c ("genprotimg: introduce new tool for the creation of PV images")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add a check to the stage3b that the kernel cmdline is always
null-terminated. While at it, ensure the coding style is consistent.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Currently, the debug information of the bootloader is discarded during
the raw binary creation. Change this by creating separate
<loader>.bin.debug files containing the debug information. The packager
will then be able to package these files as desired and the developer
can use them to debug the code.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- Move zipl/boot/error.h to include/boot
- Adjust include statements in zipb/boot and genprotimg/boot
- Remove error.h from tunedasd/src/tunedasd.c as not needed
- Fix tunedasd/src/Makefile
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The genprotimg bootloaders are s390x specific, so only build them if the
`HOST_ARCH' is set to s390x.
On x86 one can cross-compile and install the bootloaders as follows:
$ make -C genprotimg/boot HOST_ARCH=s390x CROSS_COMPILE=s390x-linux-gnu-
$ make -C genprotimg/boot install HOST_ARCH=s390x CROSS_COMPILE=s390x-linux-gnu-
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
It's cleaner if the bootloader installation code is located in the
boot/Makefile, rather than the top Makefile.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
include/boot/s390.h relies on s390 specific kernel headers. However,
some tools used this header for non-s390 code (outside of boot-loaders).
To solve this the PSW and PAGE_SIZE definitions are now in separate
header files. All includes for s390.h which are not in boot-loader code
are replaced with one of psw.h or page.h.
This fixes the compilation failure on ppc64le due to conflicting types
for `__vector128`.
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/151
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Use a linker script instead of a linker flags for the layout. While at
it, use common naming `_start` for entry. This change allows us to
simplify the Makefile by using the linker option `-T` for all
bootloaders.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The stage3b loader memory layout must not be larger than 0x10000 bytes.
Let's check this in the linker script.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
+ the input section names `.text.init` and `.text.start` aren't
ambiguous, therefore there is no reason so specify a file name
+ discard `.interp` section since no loader is used
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Instead of maintaining an include list, use an exclude list (if
neccessary). This simplifies the `objcopy` calls a lot, and it's
possible because `objcopy -O binary` only includes the memory dump of
the contents of the input object file. [1] This means that sections like
for debug information that do not occupy memory during the process
execution are discarded by design. [2]
In addition, if we do not want a particular ELF section, we can list it
in the discard section of the linker script.
[1] https://man7.org/linux/man-pages/man1/objcopy.1.html
[2] https://man7.org/linux/man-pages/man5/elf.5.html
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This disables the following warning `ld: warning: stag3a.elf has a LOAD
segment with RWX permissions` for newer linker. This changes nothing in
functionality for the bootloaders, since only the binaries and not the
ELF files are actually used.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Normally, `gcc` takes care of adding the `GNU_STACK` marking except for
assembly code. Therefore, let's add the marking manually. Discard the
`.note.GNU-stack` section in the linker script since it's just a
"message" from the compiler to the linker. This fixes the linker
warning:
ld: warning: entry.o: missing .note.GNU-stack section implies executable stack
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This work around fixes the gcc-12 false positive by disabling `Warray-bounds`:
CC genprotimg/boot/stage3a.o
In file included from stage3a.c:14:
In function ‘__test_facility’,
inlined from ‘test_facility’ at ../../include/boot/s390.h:428:9,
inlined from ‘start’ at stage3a.c:42:7:
../../include/boot/s390.h:418:17: error: array subscript 0 is outside array bounds of ‘void[0]’ [-Werror=array-bounds]
418 | return (*ptr & (0x80 >> (nr & 7))) != 0;
| ^~~~
Unfortunately, there is currently no better fix available that doesn't result
in larger boot loader code sizes. Given the importancy of the boot loader file
sizes the other fixes aren't acceptable. The Linux kernel shares the
problem (but for performance reasons), take a look at the discussion
https://lore.kernel.org/lkml/yt9dzgkelelc.fsf@linux.ibm.com/ for details.
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/130
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Remove NO_PIE_LINKFLAGS and follow the naming convention by using
LDFLAGS for linker flags. Replace all occurrences accordingly.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In the past s390 used a fixed command line length of 896 bytes. This has
changed with newer Linux kernels. There is now a parm area indicating
the maximum command line size. This parm area has always been
initialized to zero, so with old kernels this field would read zero and
we must then assume that only 896 bytes are available.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Variable names are case sensitive in Makefiles, therefore fix the typo
in the variable reference.
Fixes: 2d600570df ("genprotimg: boot: use C pre-processor for linker script generation")
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add support for the placement of the stage3b loader at other addresses
than 0xa000. For this add a position independent relocator that first
copies the original stage3b code to the memory location 0xa000 and
then starts it.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use C pre-processor for linker script generation. This allows the
usage of constants in our "linker scripts" `*.lds.S` (actually, these
are assembler files, so we can make us of the C pre-processor and its
capabilities).
Suggested-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a boot loader for protected virtualization (PV) that can be
combined with a kernel/initrd/parmfile to form a single bootable file.
This file must be constructed in a way that it can be used (1) for a
QEMU direct kernel boot and (2) it can be zipl'ed by the normal,
unmodified zipl program.
This new boot loader consists of two parts:
1. stage3a boot loader (cleartext), this loader is responsible for
the transition into the protected mode by doing diag308 subcode 8
and 10 calls.
2. stage3b boot loader (encrypted), this loader is very similar to the
normal zipl stage3 boot loader. It will be loaded by the Ultravisor
after the successful transition into protected mode. Like the zipl
stage3 boot loader it moves the kernel and patches in the values
for initrd and parmline.
The requirements for (1) and (2) result in the following constraints:
1. It must be possible to place stage3a and stage3b at a location >=
0x10000 because the zipl stage3 loader zeroes out everything at
addresses lower than 0x10000 of the image.
2. As the stage3 loader of zipl assumes that the passed kernel image
looks like a normal kernel image, the zipl stage3 loader modifies the
content at the memory area 0x10400 - 0x10800, therefore we leave this
area unused in our stage3a loader.
3. The default entry address used by the zipl stage3 loader is 0x10000
so we add a simple branch to 0x11000 at 0x10000 so the zipl stage3
loader can modify the area 0x10400 - 0x10800 without affecting the
stage3a loader.
The stage3b loader is linked at address 0x9000, therefore it will not
work at another address. The relocation support for the stage3b
loader, so that it can be placed at addresses != 0x9000, is added in
the next patch. This loader with relocation support has the name
'stage3b_reloc'.
The memory layout of the single bootable file looks like:
+-----------------------+-----------+------------------------+
|Start |End |Use |
+=======================+===========+========================+
|0 |0x7 |Short PSW, starting |
| | |instruction at 0x11000 |
+-----------------------+-----------+------------------------+
|0x10000 |0x10012 |Branch to 0x11000 |
+-----------------------+-----------+------------------------+
|0x10013 |0x10fff |Left intentionally |
| | |unused |
+-----------------------+-----------+------------------------+
|0x11000 |0x12fff |Stage3a |
+-----------------------+-----------+------------------------+
|0x13000 |0x13fff |IPIB used as argument |
| | |for the diag308 call |
+-----------------------+-----------+------------------------+
|0x14000 |0x1[45]fff |UV header used for the |
| | |diag308 call (size can |
| | |be either 1 or 2 pages) |
+-----------------------+-----------+------------------------+
|NEXT_PAGE_ALIGNED_ADDR | |Encrypted Kernel |
+-----------------------+-----------+------------------------+
|NEXT_PAGE_ALIGNED_ADDR | |Encrypted Cmdline |
+-----------------------+-----------+------------------------+
|NEXT_PAGE_ALIGNED_ADDR | |Encrypted Initrd |
+-----------------------+-----------+------------------------+
|NEXT_PAGE_ALIGNED_ADDR | |Encrypted Stage3b_reloc |
+-----------------------+-----------+------------------------+
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
