Generating and then including C source files from another C file can
lead to unexpected compilation errors in certain environments.
Switch the usage text generation from %_usage.c to %_usage.h. The
generated header provides the usage_text definition directly, and
chzdev.c and lszdev.c include the corresponding *_usage.h instead.
Update depfile prerequisites and the clean target to match the new
generated artifacts.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Consolidate the duplicated sed command sequences used to generate
*_usage.c files into a shared CSTR_SED definition and a single pattern
rule:
%_usage.c: %_usage.txt
This removes the copy/pasted rules for chzdev_usage.c and lszdev_usage.c
and keeps the Makefile easier to maintain.
Also drop the explicit chzdev.o/lszdev.o prerequisites on the generated
sources as dependencies are already tracked via the .*.o.d depfiles.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Kernel support for LCS devices was removed with commit 6cccb3bb0561
("s390/net: Remove LCS driver") in kernel v6.15. Remove the associated
zdev support for the lcs device type.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zdev uses util_readlink() now and there are no users left
for misc_readlink() anymore. Remove it.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Avoid code duplication and inconsistent error handling by replacing
readlink() with util_readlink(), which is used project-wide to
standardize readlink() usage.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add an additional trigger to the zdev-generated 41-ap.rules file. This
trigger will check the bindings_complete_count value during coldplug
replay of the ap bus, which allows the udev rule to handle the case
where zcrypt has already fired the BINDINGS==complete with
COMPLETECOUNT==1 before the udev rule was accessible (example: before
rootfs has been mounted). Without this, it's possible for the rule to
never fire despite the initial bindings having completed.
While it was always possible for zcrypt to be forced onto initrd, it
becomes far more likely with changes like 14c977768 ("zkey/dracut: Add
a dracut config file for zkey").
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Remove unused header files from these sources.
This simplifies maintenance and slightly reduces compile time.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lscss.c: In function 'is_sch_vfio':
lscss.c:392:20: error: implicit declaration of function 'basename' [-Wimplicit-function-declaration]
392 | if (strcmp(basename(driver_path), "vfio_ccw") == 0)
device.c: In function 'device_read_active_attrib':
device.c:426:45: error: implicit declaration of function 'basename'; did you mean 'rename'? [-Wimplicit-function-declaration]
426 | value = misc_strdup(basename(link));
| ^~~~~~~~
| rename
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/192
[hoeppner@linux.ibm.com: Sort includes]
Signed-off-by: L. E. Segovia <amy@amyspark.me>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
While parsing the rd.dasd kernel parameter, the dracut module
currently creates two separate udev rules for a single DASD — one
for ECKD type and one for FBA type. Because the kernel parameter
alone does not provide enough information to reliably determine the
DASD type, this dual configuration can lead to inconsistencies.
Update the logic to determine the DASD type dynamically by parsing
the modalias of available devices. If a device is not present during
boot, both udev rules will be generated.
Also add --no-module-load to the chzdev functions, because during this
time, we do not want chzdev to load the dasd module. The goal here is
to generate the right udev-rules only.
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
During autoconfig, DPM systems currently configures DASD devices twice:
once for dasd-eckd and once for dasd-fba. Because the firmware
configuration file does not provide the DASD type, this can lead
to inconsistent and redundant configurations.
For example, lszdev may show two devices with the same ID:
TYPE ID ON PERS NAMES
dasd-eckd 0.0.f001 yes auto dasda
dasd-fba 0.0.f001 no auto
However, only dasd-eckd is actually present on the machine, and
the dasd-fba entry is incorrect.
Modify this configuration logic to determine the DASD type dynamically
by parsing the modalias for each device-ID, and configures only the
correct dasd-type. The resulting lszdev output accurately reflects
the actual DASD devices present.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
When called with a device parameter, chzdev tries to load the kernel
module of the corresponding device type. This might not be desired in
certain situations like early initial RAM-disk processing.
To support this use cases, add a new command-line option
--no-module-load to prevent the loading of any kernel module by chzdev.
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
module_load_suppress() currently ignores the state parameter. Modify
it to respect the state parameter, so that the module load suppress
can be both enabled or disabled.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Add support for managing virtual I/O ccw (virtio-ccw) devices in
lszdev/chzdev.
New zdev device type virtio. Each virtio device type (blk, net,
gpu, vsock, etc.) is represented by a unique subtype of the virtio
base type.
If the virtio device type is recognized, then it will show up as
virtio-blk or virtio-net, or whatever the virtio device type is.
Otherwise, it will just show up as virtio-ccw.
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/29
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Peter Jin <pjin@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add new command-line option --ipldev. When specified and IPL was done
from a supported device type, the IPL device is selected for the
requested tool operation.
Example to list IPL device information:
$ lszdev --ipldev
Example to create a persistent configuration for the IPL device:
$ chzdev --enable --persistent --ipldev
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reduce code complexity by adding a utility function for reading text
files based on a variable path.
Note: chzdev/lszdev tools apply special path-handling via command line
option --base to allow redirecting hard-coded paths therefore libutil's
util_file functions cannot easily be used.
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The qeth-udev-rule execution logs a warning as below in the journalfs.
Failed to write ATTR{/sys/bus/ccwgroup/drivers/qeth/group}, \
ignoring: Invalid argument
This occurs because the udev rule for qeth devices is triggered by
multiple ccw devices and can be invoked in parallel. This can lead to a
situation where each of the three parallel-running udev rules tries to
group the devices simultaneously. As a result, only the first rule
succeeds, while the others fail with an -EINVAL error because the CCW
devices have already been grouped.
To prevent this, schedule a new change uevent for the base device, which
will verify the sysfs before attempting the grouping. The change event is
triggered by all three devices, ensuring that the actual write to the
attribute occurs only once and only when the sysfs attribute is ready.
Hence the add events on different devices are serialized to change event
on the base device, which then prevent duplicate concurrent grouping
attempts.
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
All files created by chzdev feature a common header; however, this
header is absent in temporary files. It is necessary to incorporate
the consistent "Generated by chzdev" header into temporary files
generated by chzdev as well, so as to properly identify these files
via option --is-owner.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Enhance the 'chzdev' tool by introducing a new option to discern
files created by 'zdev-tools.' The command usage is as follows:
$ chzdev --is-owner <file-name>
When executed, the command will return an exit code of 0 for all
files generated by zdev-tools. In the case of an unknown file, the
tool will return the exit code 'EXIT_UNKNOWN_FILE i.e 33.'
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add zdev-specific definitions into a lightweight header file. Rather
than creating a new one, transform the existing "site.h" into "zdev.h"
to house all generic zdev-specific definitions that needs to be shared
between chzdev, lszdev and zdev_id going forward.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
s390-tools doesn't define a common C/C++ standard at the moment.
Set the standard to gnu11/gnu++11, which is also used by the Kernel, and
establish a common baseline for all tools.
The -std flag is added to ALL_CFLAGS and ALL_CXXFLAGS to avoid losing it
in case CFLAGS are set by an outside entity.
It is also added to CLAGS_FOR_BUILD for this one special cross build
case.
The -std flag is removed from all tools that set it manually until now.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Converts zdev configuration into the syntax of the dracut cmdline option
rd.znet. Only znet options with non-default values are emitted. The result
string occurs on stdout. It represents one device-specification for the
given network interface name.
Example:
/lib/s390-tools/zdev-to-rd.znet persistent encbdf0
qeth,0.0.bdf0,0.0.bdf1,0.0.bdf2,layer2=1
User:
https://github.com/rhinstaller/anaconda/pull/5250
to generate dracut cmdline entries such as
rd.znet=qeth,0.0.bdf0,0.0.bdf1,0.0.bdf2,layer2=1
Github-ID: https://github.com/ibm-s390-linux/s390-tools/pull/158
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently ZDEV_SITE_ID is derived with the help of an additional
udev-rule, 40-zdev-id.rules. The sole purpose of this rule is to
determine the ZDEV_SITE_ID environment value with the help of zdev_id
binary. This solution is minimal, but this has some unwanted side-
effects. The zdev_id logic get executed for all the events, even
those completely unrelated to zdev/or site, and imports the unneeded
envionment values to the udev-db.
Instead of having an additional rule file, add this logic as part of
the udev-rule of those devices which are configured with site-support.
The logic will then be available on all those rules with the
site-supported devices only.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce dev_site_configured macro,which can be used to find the
availability of site configurations for the device during udev rule
creation.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Previously SITE_FALLBACK and other site-specific configuration support
macros were defined in device.h. Instead, move them to a relatively
smaller header file which is exclusive for site-related definitions.
This way, light-weight zdev_id also can use the same header file.
Reported-by: Steffen Maier<maier@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Behaviour of the qeth performance_stats sysfs attribute has changed
with kernel commit
b0abc4f5df76 ("s390/qeth: overhaul ethtool statistics")
that went into kernel v5.1.
Before the kernel commit
- collection of statistics was turned on and off by writing 1 or 0
- default after device activation was 0
- statistics were reset by writing 0
After the kernel commit:
- collection is always on
- attribute always reads 1
- statistics is reset by writing 1; writing 0 is a no-op
Problems of chzdev on new kernels:
chzdev cannot reset statistics ('performance_stats=1' does nothing).
'chzdev --export' always lists performance_stats.
'chzdev qeth --help-attribute performance_stats' reflects old behaviour.
This patch will do the following:
'chzdev qeth --help-attribute performance_stats' reflects new behaviour.
'chzdev --export' does not list performance_stats on new kernels.
'chzdev performance_stats=1' resets statistics on new kernels.
'chzdev performance_stats=0' still resets statistics on old kernels,
does nothing on new kernels.
Suggested-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The compiler doesn't fully understand the code block that precedes the
usage of `site` in the condition and thus it thinks it could be
uninitialized. Silence the warning with an explicit initialization.
In function 'get_site_from_pers',
inlined from 'dev_table_get_value' at lszdev.c:1079:10:
lszdev.c:258:20: warning: 'site' may be used uninitialized [-Wmaybe-uninitialized]
258 | if (site == SITE_FALLBACK)
| ^
lszdev.c: In function 'dev_table_get_value':
lszdev.c:234:13: note: 'site' was declared here
234 | int site, i, num = 0;
| ^~~~
Closes: https://github.com/ibm-s390-linux/s390-tools/pull/152
Signed-off-by: Dan Horák <dan@danny.cz>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Using option --by-interface with a non-existent network interface name
results in an unexpected duplicate warning message:
$ lszdev --by-interface xx
Could not open directory /sys/class/net/xx: No such file or directory
Could not open directory /sys/class/net/xx: No such file or directory
lszdev: Could not determine device that provides xx (xx)
Fix this by checking for the existence of the associated /sys/class/net
directory before initiating the associated directory traversal.
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zdev's --by-node option returns exit code 15 (EXIT_RUNTIME_ERROR) when
the specified device node cannot be found. This is inconsistent with
other selection options --by-path and --by-interface which both return
the more appropriate exit code 3 (EXIT_DEVICE_NOT_FOUND).
Fix this by changing --by-node to also return exit code 3 in case the
specified device node does not exist.
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The udev-rules generated with the current version of chzdev command
is missing the configuration label, incase of auto configuration,
resulting in an ineffective configuration logic.
Add the missing configuration start label for autoconfig.
Fixes: 2e89722ef0 ("zdev: make site specific udev-rule for ccw")
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
During the boot, the ZDEV_SITE_ID is derived with the help
of loadparm and will be saved in ZDEV_SITE_ID_FILE, which
will be the used by the udev-rules.
ZDEV_SITE_ID_FILE creation can have a surface of symlink attack
as we are directly using the fopen and fprintf on it. To avoid
this, make sure that we are writing the ZDEV_SITE_ID to a temporary
file, which will then be renamed to ZDEV_SITE_ID_FILE, which will
remove all the existing symlinks associated with the target file.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
udev does not allow an empty value for keys when importing output
from an external program. Providing an empty value for any key
invokes a warning during the parsing. Currently, ZDEV_SITE_ID for
fallback sites are not assigned any value. Add an empty double
quotes as the value in case of failover sites.
This modification is tested on udevadm version 253 on fedora38.
Also verify that the ZDEV_SITE_ID is properly written, if not log
the error.
Fixes: c8ad5f57d0 ("zdev: modify zdev_id to read the site_id from loadparm")
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Autoquiesce is a mechanism that tells Linux to stop issuing I/Os to a
specific DASD after certain events.
Add support for configuring related DASD device attributes
that govern the following aspects of autoquiesce:
aq_mask - Configure which events lead to autoquiesce.
aq_requeue - Configure if autoquiesce will requeue all I/O to blocklayer.
aq_timeouts - Configure the number of timeouts before autoquiesce.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
This avoids exporting explicit settings if it's the default anyway.
I.e. avoid the last line in the example below:
$ chzdev --export - --active --type --all
[active zfcp-lun 0.0.1941:0x500507630904d...:0x4055408f00000000]
scsi_dev/queue_depth=32
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix issue in the lszdev command where column names if using the --pairs
command line switch can contain characters that are not allowed to be
used as variable names in a shell environment.
Replace bad characters in column names by an underscore if the --shell
command line switch is specified along with the --pairs switch.
The additional --shell switch mimics what is already available in the
lsblk command and thus it shall be used along with the --pairs switch.
Signed-off-by: Daniel S. Haischt <modean@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
The DASD device driver has a new attribute copy_pair to make storage
server copy pairs known to the driver.
Add this attribute to zdev.
Usage example:
Add two copy pairs 1000,2000 and 1000,3000 to a DASD device 1000
$ chzdev dasd 1000 copy_pairs=1000,2000 copy_pairs=1000,3000
or
$ chzdev dasd 1000 copy_pairs="1000,2000 1000,3000"
To add a third copy pair later on:
$ chzdev dasd 1000 copy_pairs=1000,4000
To remove all copy pairs from the device 1000:
$ chzdev dasd 1000 -r copy_pairs
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add export and import support for site-specific settings. For each
site-specific configuration, a new site-block will be generated as
below. The same format can be interpreted by the import function and use
the values on the device's site-specific configuration.
Typical example of a site-block in the export file:
[site3 dasd-fba 0.0.f001]
online=1
cmb_enable=0
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce --deconfigure-all feature, which will remove all available
settings from the mentioned device. A typical device can have 10
different site-specific settings, active settings, persistent
settings and sometimes auto-configured settings configured in it.
--deconfigure-all can be used to remove all of them with a single
command.
usage: chzdev -D <device-id>
chzdev --deconfigure-all <device-id>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
lszdev must be modified to share the site-specific configuration
information from the persistent settings. The persistent configuration
array will be read and tabularized based on the site-id input from the
user.
This patch also accommodates the site specific information in the
lszdev --info command. New information about the site-ids are integrated
with the command. For example,
DEVICE dasd-eckd 0.0.f001
Names : -
Modules : dasd_eckd_mod dasd_mod
Online : no
Exists : yes
Persistent : yes
Sites : 1,2
ATTRIBUTE ACTIVE PERSISTENT SITE1 SITE2
cmb_enable "0" "0" "1" -
eer_enabled "0" - - -
erplog "0" - - -
failfast "0" - - -
last_known_reservation_state "none" - - -
online "0" "1" "1" "1"
raw_track_access "0" - - -
readonly "0" - - -
reservation_policy "ignore" - - -
use_diag "0" - - -
Each available site specific configuration will be shown as column. The
"Sites" parameter in the above output indicates the available site
configurations and the SITE1 and SITE2 colums indicates the detailed
configuration for the respective sites.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Modify the dev_get_setting_list function to get the site-specific
attributes of the device. The new site_id parameter for this function
must be less than SITE_FALLBACK to read the site-specific attributes.
As SITE_FALLBACK setting is same as persistent setting, we do not need
a separate read function for it.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The udev-rules must be modified to make it site-specific. The site
specific part of the rule should be executed only on the sites where the
devices belong. Change the generic udev rule to support the site-specific
udev-rule.
During boot, the current site-id is read from the LOADPARM which is
located at /sys/firmware/ipl. The zdev_id command reads this LOADPARM
and prints the SITE_ID based on the value. This SITE_ID is the
current site where the udev-rule is executing. Based on this assumption,
the rule is divided in to multiple blocks where each site block is executed
only for the corresponding sites.
The rule executes based on the value read from the LOADPARM.
1. When the LOADPARM specifies a site-id and if the current device has
an associated configuration settings, it will be used.
2. When the LOADPARM specifies a site, and the current device does not
have any associated configuration set, the udev rule uses the
fallback configuration settings.
3. If the device does not have a fallback-configuration settings or any
site-specific settings, no configurations will be used.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The currently active site can be found from the loadparm attribute which
is located at /sys/firmware/ipl/loadparm. Read the value of loadparm and
extract the site_id.
The loadparm is an 8 byte alphanumerical IPL parameter. The content of
loadparm can be of different forms to indicate different boot menu
options, which are used by Linux for selecting the respective boot menu
entries. To indicate the site-id, loadparm adds a 'S' character. Where,
the following character after 'S' indicates either the site-id or
indivcation to derive the site-id from SSID.
For example,
If the loadparm value is Sn,'n' is the integer which could be one of the
valid site_ids from 0 to 9; i.e when booted on site-1, loadparm value will
be S1.
If loadparm value is "SS", zdev_id extracts the site_id from the SSID of
the current ipl device. For ccw and zfcp devices, the current ipl device-id
can be found at /sys/firmware/ipl/device.
In any case, if the loadparm contains invalid value, or empty, the
site_id will be default to the common-site.
After the first invocation of the zdev_id from udev-rule, the site-id
information is stored in /run/zdev_id.env file. This will reduce the
number of further invocation of zdev_id from within udev-rules.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Currently zdev supports the configuration and maintenance of one single
persistent device state. With the introduction of sites, zdev should be
able to store, configure and maintaine NUM_SITES number of states in
the persistent configuration. This patch modifies the struct device and
adds a new site_specific device_state array, which stores the
persistent configuration for all the available sites.
Total number of available sites are configured with NUM_SITES. Where,
10 site-specific configurations and 1 common configuration.
1. during read, all site data is always read and update the
site_specific[] array.
2. dev->persistent is a copy of dev->site_specific[global_site_id]
3. modifications are only done on dev->persistent, and during write
dev->persistent overlays dev->site_specific[global_site_id]
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In some high-availability setups, root and boot disks of a Linux
installation are copied to remote sites that can take over execution
of a Linux workload in case of an outage of the original site.
A site in this context is an execution environment such as an LPAR
or z/VM guest.
Each site may provide a different set of devices, or require different
parameters to be applied per device. chzdev supports site-specific
device configuration for up to 10 sites. Each site is identified by
a number in the range 0 to 9. You can provide a separate set of persistent
device configuration for each site. The IPL Load parameter value specified
during boot determines the currently active site. Only the device
configuration of the active site is applied during boot and when new
devices become available. A common configuration can be provided that is
applied when no site-specific configuration is available for a device in
the active site.
User can use the --site parameter to configure devices for a specific
site only. Configuration actions without a site parameter apply to the
common configuration.
During the boot, the active site configuration is chosed based on the
IPL LOADPARM variable. If the LOADPARM contains no valid site-id (0 to 9),
the fallback-site id will be used. The fallback-site-id can also be
configured with the zdev tools by not specifying the --site parameter.
Some of the new chzdev/lszdev commands with site-parameter can be as
follows
1. chzdev -ep f001 --site 3
This command is used to configure the device f001 for the site 3. During
boot, if the LOADPARM value is S3, this device configuration will be
used.
2. lszdev --site 3
This command lists all the devices which are configured for site 3.
3. chzdev -ep f001
Above command does not have a --site parameter. This device settings
will be used for the following conditions
1. When the loadparm specifies a site, (e.g S3), and the device does not
have an associated config-set, zdev uses fallback config set.
2. When the loadparm does not specify any site information, then the
fallback config set will be used.
When the loadparm specifies a site, and the device does not have an
associated config set, nor a fallback site, nothing is configured for this
device.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
