The strlcpy() implementation in libu2s is beneficial for other tools as
well. Move the implementation to libutils and replace misc_strlcpy() in
libu2s accordingly.
Change the link order in zipl to make it build again.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use misc_asprintf() for concatenating strings and get rid of the
following GCC8 compile warnings:
disk.c: In function ‘disk_get_info’:
disk.c:247:43: warning: ‘%d’ directive output may be truncated writing
between 1 and 11 bytes int o a region of size between 0 and 79
[-Wformat-truncation=]
snprintf(ppn_cmd, sizeof(ppn_cmd), "%s %d:%d",
^~
disk.c:247:39: note: using the range [-2147483648, 2147483647] for
directive argument
snprintf(ppn_cmd, sizeof(ppn_cmd), "%s %d:%d",
^~~~~~~~~~
disk.c:247:39: note: using the range [-2147483648, 2147483647] for
directive argument
disk.c:247:4: note: ‘snprintf’ output between 5 and 104 bytes into a
destination of size 80
snprintf(ppn_cmd, sizeof(ppn_cmd), "%s %d:%d",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
script_file, major(stats.st_rdev),
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
minor(stats.st_rdev));
~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Using the DATA_SIZE() macro gets rid of the following GCC8 compile
warning:
boot.c: In function ‘boot_init_fba_stage0’:
boot.c:120:2: warning: ‘memcpy’ forming offset [2, 152] is out of the
bounds [0, 1] of object ‘_binary_fba0_bin_start’ with type ‘char’
[-Warray-bounds]
memcpy(stage0, DATA_ADDR(fba0), sizeof(*stage0));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from boot.c:18:
../boot/data.h:24:13: note: ‘_binary_fba0_bin_start’ declared here
extern char _binary_fba0_bin_start;
^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
With GCC8 the following warning is displayed:
In file included from cio.h:15,
from stage2.h:15,
from menu.h:15,
from stage2.c:14:
s390.h:193:1: warning: alignment 1 of ‘struct _lowcore’ is less than 8
[-Wpacked-not-aligned]
} __packed;
^
Fix by aligning struct _lowcore to double page size.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
zipl currently uses the FIBMAP ioctl to map blocks for the bootloader;
on XFS, if FIBMAP is requested on a reflinked file, it will fail -
and FIBMAP returns 0 in this case, which is indistinguishable from a
hole. This causes boot to fail because the file is not mapped.
We can use the FIEMAP ioctl instead, which is able to map reflinked
files. While FIEMAP is able to map entire extents at once, here we
simply use it to obtain the mapping block-by-block so that it fits
in with the current FIBMAP calls.
Fixes: https://github.com/ibm-s390-tools/s390-tools/issues/34
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/36
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Tested-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Building zipl from outside the zipl/ sub-directory fails due to a
missing dependency:
# cd s390-tools
# make -C zipl/src/ zipl
boot.c:18:10: fatal error: ../boot/data.h: No such file or directory
#include "../boot/data.h"
This is because boot/data.h needs to be generated before src/boot.c can
be compiled. Fix this by adding the missing dependency to the zipl
Makefile.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In the zipl Makefile macros are defined with the sole purpose to define
other macros in zipl.h. Remove this unnecessary indirection.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The file system dumper no longer exists. So there is no need in keeping
'PART' to distinguish between the file system and the partition dumper.
Adjust the macro name to the usage in zipl by removing 'PART'.
While at it also adjust the file names the macros stand for.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The macro names are a mixture of the original file system dumper (FSDUMP)
and its extension to cut the file system and write directly to a partition
(PART). The original dumper no longer exists and today the feature is
called zfcpdump. Prevent confusion by renaming the macros to fit todays
usage.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The BootLoaderSpec (BLS) defines a file format for boot configurations,
so bootloaders can parse these files and create their boot menu entries
by using the information provided by them [0].
This allow to configure the boot items as drop-in files in a directory
instead of having to parse and modify a bootloader configuration file.
If the /boot/loader/entries exists and there are BLS files there, then
these are parsed and configuration sections are added without the need
to have these in a zipl.conf file.
A different BLS directory can be specified from the command line using
the --blsdir option.
[0]: https://www.freedesktop.org/wiki/Specifications/BootLoaderSpec/
GitHub-ID: #28
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The function returns 0 on success and a negative number on error but is
useful to know how many tokens were allocated. This will be used by the
BLS parsing code to determine if needs to allocate mor tokens or not to
parse the BLS fragments.
GitHub-ID: #28
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Adjust progress_print() function to print dump progress message based on
the time interval thus printing the message with a regular rate.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Update zipl DASD standalone dumpers for single-volume, multi-volume and FBA
to drop the sets of zero pages when dumping memory to disk. Thus, all
continuous sets of zero-megabytes in the memory are dropped during the dump
stage.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Old implementation was using Test Protection (TPROT) instruction to
validate the memory page. Given that it is a rather slow instruction and
the fact that we only need to validate the read-access for a page, we can
use simple Load or Insert Character instruction to test that.
The new version of page_is_valid() without a TPROT is introduced.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The program check handler has a bug in calculating the address of the target
to jump to. Furthermore the use of relative addresses in the exception table
can lead to situations where the (calculated) fault is not unique. Storing
the absolute address of the fault and target in the exception table solves
both problems.
This patch is intended to:
- Modify exception table to store the absolute address of 'fault' and
'target' points
- Adjust program check handler function pgm_check_handler_fn() accordingly
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix some warnings found by sparse.
Declare one function static and change static variables to defines.
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Remove unused include to fix an error reported by make C=1.
CHECK zipl/src/zipl_helper.device-mapper.o
../../include/lib/dasd_base.h:159:20: error: redefinition of struct hd_geometry
../../common.mak:234: recipe for target 'zipl_helper.device-mapper.o' failed
make: *** [zipl_helper.device-mapper.o] Error 1
The structure hd_geometry is defined in dasd_base.h.
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Compilers in Debian and Ubuntu default to enabling PIE for all binaries.
This is a poor fit for boot loader code that has strict requirements
for its layout. Hence always forcefully disable PIE.
As older compilers still need to be supported, no-pie usage is
conditional on CC's -dumpspecs output.
Fixes: #3
Signed-off-by: Philipp Kern <pkern@debian.org>
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
dasdview command does not accept the '-f' option so because of that the
command will always fail.
Fixes: #10
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Acked-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
This commit is based on the s390-tools-1.39.0 version.
Changes on top of s390-tools-1.39.0:
- Add MIT license to all source files
- Add LICENSE file
- Transform REAMDE to README.md (markdown)
- Add AUTHORS.md file
- Add CONTRIBUTING.md file
- Move changelog from README to CHANGELOG.md file
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
