Function get_payload_records() reading from disk, blindly adds payload
record (junks) to a list in a 2-stage hierarchical hash keyed with
request ID and PAY area.
On adapter offline/online, zfcp resets the request ID to re-start with 1.
Hence it's not a unique foreign key in the lifetime of the PAY area.
The last payload record (junks) read for the same request ID and PAY area
is the one printed as named PAY field in the tool output.
This is not necessarily the chronologically last record due to PAY area
wrapping.
With this workaround, we:
* warn on reading PAY records if ambiguous entries occurred,
* print additional PAY timestamps which the user can compare
with the actual trace record timestamps to determine if they are close
enough to indicate a match.
We only found this by accident because we kept "short" "payload" being a
built-in part of some actual trace record types in areas HBA, SAN, SCSI.
For above cases, the full PAYload did not match the
built-in "short" "payload".
While at it, also add a comment that PAY output can also be wrong
in another case when junks of multi-part PAY records are missing due
to PAY area wrapping.
Below is an abbreviated example output with this workaround:
Loading trace records ...(this might take a while)
Warning: Ambiguous PAYload records. reqid:0000000000000037 area:san_res
...
Timestamp : 2017-07-07-18:01:34:574827
Area : SAN
...
Tag : fssct_1
Request ID : 0x0000000000000037
Destination ID : 0x00fffffc
SAN req short : 01000000 fc020000 01720ffc 00000000
00000008
SAN req length : 20
Timestamp : 2017-07-07-18:01:34:619310 ------------------+
Area : SAN |
... |
Tag : fsscth2 |
Request ID : 0x0000000000000037 |
Destination ID : 0x00fffffc |
SAN resp short : 01000000 fc020000 80020000 00000000 |
00671a07 00000000 c05076ff d6801850 |
00671a7e 00000000 c05076ff d6801968 |
SAN resp length: 16384 |
Payload time : 2017-07-07-18:16:17:165708 <== does not match
San resp info : 01000000 fc020000 80020000 00000000 <== wrong
4a49424d 20202020 20323936 34202020 <== wrong
20202020 20202020 20303230 30303030 <== wrong
30303745 43383720 20504348 49443a20 <== wrong
30313938 204e5049 5620556c 7049643a <== wrong
20303536 30303330 30202020 00000000 <== wrong
00000000 00000000 00000000 00000000 <== wrong
... <== wrong
...
Timestamp : 2017-07-07-18:16:17:165713
Area : SAN
...
Tag : fsscth2
Request ID : 0x0000000000000037 <== same reqid & pay "area"
Destination ID : 0x00fffffc
SAN resp short : 01000000 fc020000 80020000 00000000
4a49424d 20202020 20323936 34202020
20202020 20202020 20303230 30303030
SAN resp length: 273
Payload time : 2017-07-07-18:16:17:165708 <== 2nd & last, match
close to Timestamp
San resp info : 01000000 fc020000 80020000 00000000
4a49424d 20202020 20323936 34202020
20202020 20202020 20303230 30303030
30303745 43383720 20504348 49443a20
30313938 204e5049 5620556c 7049643a
20303536 30303330 30202020 00000000
00000000 00000000 00000000 00000000
...
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The output of lsof command is sometimes too long and makes it difficult
to search in runtime.out. Move the output to a separate file.
Signed-off-by: Sa Liu <saliu@de.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Most bootloaders use the BootLoaderSpec "title" field to name the entries
in their boot menu. The zipl bootloader used the "version" field instead,
since it was wrongly assumed that the zipl boot menu didn't support names
that contained spaces, which are usually present in a BLS "title" field.
But this is not the case, names with space characters are supported by the
IPL and is just a constraint of the section heading in the zipl.conf file.
So to be consistent with all the other bootloaders, use the "title" field
also on zipl when populating the boot menu entries from BLS files.
Closes: https://github.com/ibm-s390-tools/s390-tools/pull/47
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Stefan Haberland sth@linux.ibm.com
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a zipl-switch-to-blscfg script that can be used to switch the zipl
configuration in a system to use the BootLoaderSpec (BLS) config files
to define the IPL sections instead of having them defined in zipl.conf.
Closes: #28
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Use a character, that can't be used in rpm Version and Release tag, as
the delimiter in sed expressions.
Fixes: #25
Signed-off-by: Dan Horák <dan@danny.cz>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
The information shown with the --help option did not mention the -v or
--version option which can be used to retrieve the version information.
This patch fixes it.
Fixes: 7179f5de2a1582 ("cpi: Introduce new udev rule and integrate with systemd unit")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reference-ID: VS1706
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Add a new udev rule that is triggered when a KVM VM is started
on the system the very first time. This rule reports over the
sysfs CPI kernel interface that the system is a KVM host.
Currently the cpi.service systemd unit already works with
the CPI sysfs interface. Introduce a new internal utility
script "cpictl" that is used by both the udev rule and
the systemd unit to guarantee coordinated access to the
kernel CPU interface.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
This commit is based on the s390-tools-1.39.0 version.
Changes on top of s390-tools-1.39.0:
- Add MIT license to all source files
- Add LICENSE file
- Transform REAMDE to README.md (markdown)
- Add AUTHORS.md file
- Add CONTRIBUTING.md file
- Move changelog from README to CHANGELOG.md file
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
