Integrate zlib DFLTCC deflate compression to single volume dasd dumper
using the existing s390 extended dump format. Compression takes place
only if DFLTCC facility is available, otherwise dump is written
uncompressed as before.
First megabyte of memory is always written uncompressed and afterwards
this area is used for zlib workspace and for the compression output buffer.
The compression takes place in chunks of data of equal size (currently 1MB)
and the offset of each compressed chunk is stored in the dump segment
header. Since existing dump segment headers of 1 page size are used, we
need to limit the maximum size of compressed dump segments.
Chunk is written uncompressed in case of compression error or if
deflate compression only makes it bigger.
Thus every chunk of data is compressed separately and can be decompressed
independently. The main reason for that is to enable zgetdump to make fast
read seeks. Otherwise, zgetdump would need to decompress a big dump segment
in the worst case to extract a single piece of data.
Put compression related functions and structures to eckd2dump_zlib.c
and eckd2dump_zlib.h
Update zipl man page with the general information of zlib compression
support.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add DIAG308_LOAD_NORMAL diag308 subcode (used by FCP/NVMe normal ipl).
Rename other diag308_subcode and diag308_rc constants to be in sync with
kernel naming.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
`load_wait_psw` is defined in include/boot/s390.h but is implemented in
zipl/boot/libc.c. This results in a dangling definition for s390.h users
other than zipl, due to the missing implementation. Since the function
is only relevant for zipl, move the definition to the corresponding
header file zipl/boot/libc.h
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
include/boot/s390.h relies on s390 specific kernel headers. However,
some tools used this header for non-s390 code (outside of boot-loaders).
To solve this the PSW and PAGE_SIZE definitions are now in separate
header files. All includes for s390.h which are not in boot-loader code
are replaced with one of psw.h or page.h.
This fixes the compilation failure on ppc64le due to conflicting types
for `__vector128`.
Fixes: https://github.com/ibm-s390-linux/s390-tools/issues/151
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Use the `tpi_info` struct definition, similar to the Linux kernel, in
the lowcore struct. This change allows us to use simple assignments
instead of using casts. Additionally, there is the advantage that the
lowcore definition from the s390-tools now looks more similar to the
lowcore definition used by the Linux kernel.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
While at it, rename PSW_SHORT_ADDR_MASK and PSW_ADDRESS_MASK to
PSW32_ADDR_MASK. As a side effect this removes the zipl.h dependency
of the boot loaders. While at it,
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
`linux/asm/types.h` also defines the struct `__vector128` so in order
to avoid definition conflicts add the macro guard _S390_TYPES_H, which
is defined in `linux/asm/types`. `linux/asm/types.h` is included by
glib2, which is used by the PV tooling.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Add a boot loader for protected virtualization (PV) that can be
combined with a kernel/initrd/parmfile to form a single bootable file.
This file must be constructed in a way that it can be used (1) for a
QEMU direct kernel boot and (2) it can be zipl'ed by the normal,
unmodified zipl program.
This new boot loader consists of two parts:
1. stage3a boot loader (cleartext), this loader is responsible for
the transition into the protected mode by doing diag308 subcode 8
and 10 calls.
2. stage3b boot loader (encrypted), this loader is very similar to the
normal zipl stage3 boot loader. It will be loaded by the Ultravisor
after the successful transition into protected mode. Like the zipl
stage3 boot loader it moves the kernel and patches in the values
for initrd and parmline.
The requirements for (1) and (2) result in the following constraints:
1. It must be possible to place stage3a and stage3b at a location >=
0x10000 because the zipl stage3 loader zeroes out everything at
addresses lower than 0x10000 of the image.
2. As the stage3 loader of zipl assumes that the passed kernel image
looks like a normal kernel image, the zipl stage3 loader modifies the
content at the memory area 0x10400 - 0x10800, therefore we leave this
area unused in our stage3a loader.
3. The default entry address used by the zipl stage3 loader is 0x10000
so we add a simple branch to 0x11000 at 0x10000 so the zipl stage3
loader can modify the area 0x10400 - 0x10800 without affecting the
stage3a loader.
The stage3b loader is linked at address 0x9000, therefore it will not
work at another address. The relocation support for the stage3b
loader, so that it can be placed at addresses != 0x9000, is added in
the next patch. This loader with relocation support has the name
'stage3b_reloc'.
The memory layout of the single bootable file looks like:
+-----------------------+-----------+------------------------+
|Start |End |Use |
+=======================+===========+========================+
|0 |0x7 |Short PSW, starting |
| | |instruction at 0x11000 |
+-----------------------+-----------+------------------------+
|0x10000 |0x10012 |Branch to 0x11000 |
+-----------------------+-----------+------------------------+
|0x10013 |0x10fff |Left intentionally |
| | |unused |
+-----------------------+-----------+------------------------+
|0x11000 |0x12fff |Stage3a |
+-----------------------+-----------+------------------------+
|0x13000 |0x13fff |IPIB used as argument |
| | |for the diag308 call |
+-----------------------+-----------+------------------------+
|0x14000 |0x1[45]fff |UV header used for the |
| | |diag308 call (size can |
| | |be either 1 or 2 pages) |
+-----------------------+-----------+------------------------+
|NEXT_PAGE_ALIGNED_ADDR | |Encrypted Kernel |
+-----------------------+-----------+------------------------+
|NEXT_PAGE_ALIGNED_ADDR | |Encrypted Cmdline |
+-----------------------+-----------+------------------------+
|NEXT_PAGE_ALIGNED_ADDR | |Encrypted Initrd |
+-----------------------+-----------+------------------------+
|NEXT_PAGE_ALIGNED_ADDR | |Encrypted Stage3b_reloc |
+-----------------------+-----------+------------------------+
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Errors fixed:
../../include/boot/s390.h: In function '__stfle_asm':
../../include/boot/s390.h:424:41: error: conversion to 'long unsigned int' from 'int' may change the sign of the result [-Werror=sign-conversion]
register unsigned long reg0 asm("0") = size - 1;
../../include/boot/s390.h: In function 'stfle':
../../include/boot/s390.h:453:31: error: conversion to 'long unsigned int' from 'int' may change the sign of the result [-Werror=sign-conversion]
nr = MIN((nr + 1) * 8, size * 8UL);
../../include/boot/s390.h: In function 'diag308':
../../include/boot/s390.h:296:9: error: conversion from 'long unsigned int' to 'int' may change value [-Werror=conversion]
return _rc;
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Now that we made sure that s390.h can be used with our minimal libc
implementation and glibc move s390.h to `include/boot/s390.h`. While
at it, make sure that s390.h is assembler compatible as it will be
used later in the PV boot loader and include s390.h in ipl.h as
PAGE_SIZE is used there.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
