Add DIAG308_LOAD_NORMAL diag308 subcode (used by FCP/NVMe normal ipl).
Rename other diag308_subcode and diag308_rc constants to be in sync with
kernel naming.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
- Move zipl/boot/error.h to include/boot
- Adjust include statements in zipb/boot and genprotimg/boot
- Remove error.h from tunedasd/src/tunedasd.c as not needed
- Fix tunedasd/src/Makefile
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
. Parse LOADPARM specified by user to find out site-ID;
. Support multiple namespaces in the environment block. Use hash
function on "extended" strings (i.e. strings with logical
prefixes) for the key-value store implementation;
. Added logic to activate a particular namespace by site-ID passed
by user via LOADPARM;
. Modify the logic of evaluation of zIPL environment variables in
the kernel command line. Use the activated namespace for the
evaluation
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Fix Sparse findings like:
warning: symbol 'hash_table_find' was not declared. Should it be static?
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This adds support for long command lines. The boot loader stages
will no longer use a fixed limit when copying the command line, but
will use the maximum length from the kernel image that is being loaded.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
No need to use memcpy() and carry the length around all the time.
Switch to using strlcpy() to simplify the code.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Before starting the kernel:
1. parse environment block (if any) and create a hash table
of all found pairs (NAME, VALUE);
2. scan the command line, which already contains extra-parameters
(if any), and for each found ${NAME} replace it with VALUE, as
found in the hash table by NAME.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Let's assume the original `command_line` is 'aaaaaaaaaaaaaaaaaa' and
`cextra` is ' =blub'. With the old code this would result in the
following new command line:
'blubaaaaaaaaaaaaa' instead of the expected result 'blub\0aaaaaaaaaaaa'
Let's fix this by setting the NULL-termination for the new command
line. While at it, use the `command_line` variable instead of casting
an address.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The inserted blank must also be taken into account for the calculation
of `cmdline_len`. In general it's only possible to insert a blank if
the command line length is not already the maximum.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
`src` parameter for `memcpy` is set to `cextra + begin` but the offset
begin is not taken into account for the calculation of the length that
should be copied.
Fix this by increment the cextra pointer for each skipped whitespace
of the extra parameter.
While at it, rename `end` variable to `cmdline_len`, `command_line`
variable to `cmdline`, remove useless void pointer cast, and use
strlen instead of a while loop to determine the cmdline string length.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
1. `begin` is used as array index and should therefore never be greater
than COMMAND_LINE_SIZE - 1. Therefore let's fix the while condition.
2. `length` describes the string length and should therefore also never
be greater than COMMAND_LINE_SIZE - 1.
The 1. off-by-two error can lead to a out-of-bounds read and the 2.
to a buffer overflow.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
While at it, rename PSW_SHORT_ADDR_MASK and PSW_ADDRESS_MASK to
PSW32_ADDR_MASK. As a side effect this removes the zipl.h dependency
of the boot loaders. While at it,
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Move COMMAND_LINE_EXTRA to `boot/loaders_layout.h` so it can be reused
by `menu.c`and `stage3.c`. Additionally, reuse COMMAND_LINE_SIZE from
`linux_layout.h` in `menu.c`.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Introduce a struct definition for the stage3 parameters used by
stage3.c. This makes it easier to maintain the stage3 linker script
and it allows us to consolidate the stage3_params structs defined in
`stage3.h` and `include/boot.h` as well as the stage3 flag macros.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
In case secure boot is enabled but no components in the IPL report
are found it ends up in an endless loop in the component verification.
To prevent this check if components are found and exit if not.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The lowcore parmblock pointer is not valid in every case. For example
it is invalid for CCW type IPL.
To have an indication if the pointer is valid do a diag308 to store the
parmblock and check if secure boot is enabled.
If it is enabled the lowcore pointer is valid and the ipl report that is
needed for secure boot can be found right behind the ipl parmblock.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This allows the reuse of the code later in sclp.c. While at it, also
declare @source parameter of `ebcdic_to_ascii` function as `const` and
rename all `ebc_` function name prefixes into `ebcdic_`. Move
conversion tables to separate file so it only gets linked into loaders
that need it.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Now that we made sure that s390.h can be used with our minimal libc
implementation and glibc move s390.h to `include/boot/s390.h`. While
at it, make sure that s390.h is assembler compatible as it will be
used later in the PV boot loader and include s390.h in ipl.h as
PAGE_SIZE is used there.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Make `IPL_DEVICE` definition consistent with the kernel definition and
the definition in tape0.S. This allows us to refactor the code later.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
To ensure that only verified code is executed the stage 3 loader has
to check if the load psw points to an address that has previously been
verified by the machine loader.
If secure boot is enabled the IPL process will only continue if the
verification was successful.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The first component that gets control after IPL is the zIPL-provided
stage 3 boot loader. This boot loader is based on a binary image linked
into the zIPL executable. When preparing a disk for IPL, zIPL updates
runtime parameters in the boot loader image and writes the resulting
data to disk.
To support the Secure Boot firmware feature, the stage 3 code must be
signed, and can therefore no longer contain variable parameter portions.
Also the boot loader image should be accessible as a separate file to
enable the use of external programs for creating the signature.
This patch moves the stage 3 boot loader code to an external file
location and splits out the parameter portion into a separate, unsigned
on-disk component.
The new memory layout of the stage 3 loader during its execution looks
as follows:
* 0x0000-0x1fff Lowcore
* 0x2000-0x5fff Memory allocation (heap)
* 0x7000-0x8fff free
* 0x9000-0x9fff Stage3 parameter
* 0xa000-0xcfff Stage3 code
* 0xd000-0xefff Section: bss, rodata, data
* 0xf000-0xffff Stack
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
The binary Linux kernel image is built to be loaded to memory address
0x0 but the first 64 kbyte contain an IPL header that is not used for
disk IPL. zIPL strips away this IPL header when writing IPL records to
disk, loads the remaining data to memory address 0x10000 and uses the
memory area below that for its own boot loader code.
The Secure Boot firmware feature checks the integrity of an installed
image during IPL using a checksum that was generated for the full image.
Since the checksum becomes invalid if the IPL header is removed, zIPL
must be changed to write the full image to disk.
This patch modifies the zIPL logic to no longer strip away the IPL
header. Instead the full image is loaded to a higher memory address and
relocated by the stage 3 boot loader code to its final location.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
This commit is based on the s390-tools-1.39.0 version.
Changes on top of s390-tools-1.39.0:
- Add MIT license to all source files
- Add LICENSE file
- Transform REAMDE to README.md (markdown)
- Add AUTHORS.md file
- Add CONTRIBUTING.md file
- Move changelog from README to CHANGELOG.md file
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
