New release s390-tools-2.42.0

Signed-off by: Jan Höppner <hoeppner@linux.ibm.com>

.gitignore

@@ -25,7 +25,7 @@ compile_commands.json
 #
 **/.detect-openssl.dep.c
 *.debug
-*/autocompletion_generator_host
+**/autocompletion_generator_host
 ap_tools/ap-check
 cmsfs-fuse/cmsfs-fuse
 cpacfstats/cpacfstats
@@ -50,12 +50,22 @@ dasdfmt/dasdfmt
 dasdfmt/_dasdfmt
 dasdfmt/dasdfmt.bash
 dasdinfo/dasdinfo
+dasdinfo/_dasdinfo
+dasdinfo/dasdinfo.bash
 dasdview/dasdview
+dasdview/_dasdview
+dasdview/dasdview.bash
 dump2tar/src/dump2tar
+dump2tar/src/_dump2tar
+dump2tar/src/dump2tar.bash
 fdasd/fdasd
+fdasd/_fdasd
+fdasd/fdasd.bash
 hmcdrvfs/hmcdrvfs
 hsavmcore/check-dep-fuse
 hsavmcore/hsavmcore
+hsavmcore/_hsavmcore
+hsavmcore/hsavmcore.bash
 hyptop/hyptop
 ip_watcher/xcec-bridge
 ipl_tools/chreipl
@@ -88,34 +98,58 @@ libutil/*_example
 libvmcp/vmcp_example
 libzds/libzds.a
 lsstp/lsstp
+lsstp/_lsstp
+lsstp/lsstp.bash
 mon_tools/mon_fsstatd
 mon_tools/mon_procd
 opticsmon/opticsmon
+opticsmon/_opticsmon
+opticsmon/opticsmon.bash
 osasnmpd/osasnmpd
 qetharp/qetharp
 qethqoat/qethqoat
 systemd/cpacfstatsd.service
 systemd/iucvtty-login@.service
 systemd/ttyrun-getty@.service
-tape390/tape390_crypt
-tape390/tape390_display
 tunedasd/src/tunedasd
+tunedasd/src/_tunedasd
+tunedasd/src/tunedasd.bash
 vmcp/vmcp
+vmcp/_vmcp
+vmcp/vmcp.bash
 vmur/vmur
 zconf/chp/chchp
+zconf/chp/_chchp
+zconf/chp/chchp.bash
 zconf/chp/lschp
+zconf/chp/_lschp
+zconf/chp/lschp.bash
 zconf/chp/chpstat/chpstat
+zconf/chp/chpstat/_chpstat
+zconf/chp/chpstat/chpstat.bash
 zconf/css/lscss
+zconf/css/_lscss
+zconf/css/lscss.bash
 zconf/qeth/lsqeth
+zconf/qeth/_lsqeth
+zconf/qeth/lsqeth.bash
 zconf/scm/lsscm
+zconf/scm/_lsscm
+zconf/scm/lsscm.bash
 zconf/zcrypt/chzcrypt
+zconf/zcrypt/_chzcrypt
+zconf/zcrypt/chzcrypt.bash
 zconf/zcrypt/lszcrypt
+zconf/zcrypt/_lszcrypt
+zconf/zcrypt/lszcrypt.bash
 zconf/zcrypt/zcryptctl
 zconf/zcrypt/zcryptstats
+zconf/zcrypt/_zcryptstats
+zconf/zcrypt/zcryptstats.bash
 zdev/src/chzdev
-zdev/src/chzdev_usage.c
+zdev/src/chzdev_usage.h
 zdev/src/lszdev
-zdev/src/lszdev_usage.c
+zdev/src/lszdev_usage.h
 zdev/src/zdev_id
 zdsfs/zdsfs
 zdump/.check_dep_fuse
@@ -139,6 +173,8 @@ zipl/src/chreipl_helper.device-mapper
 zipl/src/chreipl_helper.md
 zipl/src/zipl
 zipl/src/zipl-editenv
+zipl/src/_zipl-editenv
+zipl/src/zipl-editenv.bash
 zipl/src/zipl_helper.device-mapper
 zipl/src/zipl_helper.md
 zkey/check-dep-zkey
@@ -151,5 +187,11 @@ zkey/kmip/zkey-kmip.so
 zkey/zkey
 zkey/zkey-cryptsetup
 zmemtopo/zmemtopo
+zmemtopo/_zmemtopo
+zmemtopo/zmemtopo.bash
 zpcictl/zpcictl
+zpcictl/_zpcictl
+zpcictl/zpcictl.bash
 zpwr/zpwr
+zpwr/_zpwr
+zpwr/zpwr.bash

AUTHORS.md

@@ -17,6 +17,7 @@ List of all individuals having contributed content to s390-tools
 - Bjoern Walk
 - Brian C. Lane
 - Carsten Otte
+- Chinmaya Kajagar
 - Christian Borntraeger
 - Christian Ehrhardt
 - Christof Schmitt

CHANGELOG.md

@@ -1,6 +1,37 @@
 Release history for s390-tools (MIT version)
 --------------------------------------------
 
+* __v2.42.0 (2026-04-30)__
+
+  For Linux kernel version: 7.0
+
+  Add new tools / libraries:
+  - Enable zsh and bash autocompletion for various tools
+  - pvebc: Resolve ASR integrity structure for EBC
+  - pvics: Generate SEL guests from base images
+
+  Remove:
+  - tape390_display and tape390_crypt removed due to long gone hardware support
+  - znetcontrolunits: Remove znetcontrolunits library
+
+  Changes of existing tools:
+  - cpumf/pai: Install SIGINT/SIGTERM handler for graceful termination
+  - dbginfo.sh: Add command zmemtopo
+  - libutil/util_fmt: Add support for JSON Lines text format
+  - lstape: Remove 3480 and 3590 tape support
+  - lsznet: Remove support for lcs device type
+  - pvsecret: Add support for ASR integrity structure for EBC
+  - zfcpdbf: Print plogi and prli within open port response as payload
+  - zfcpdbf: Trace all fsf status read buffer fields under HBA
+  - zipl/boot: Add secure boot option to the dump programm
+  - zkey, libekmfweb, libseckey, libkmipclient: Adjust for OpenSSL v4.0.0 API
+                                                changes and deprecations
+
+  Bug Fixes:
+  - hyptop/opts: Fix long command line option abbreviations
+  - libutil/util_autocomp: Fix default file completion
+  - zipl/boot: Fix stage3 secure boot trailer placement
+
 * __v2.41.0 (2026-02-16)__
 
   For Linux kernel version: 6.19

Makefile

@@ -11,7 +11,7 @@ BASELIB_DIRS = libutil libseckey
 LIB_DIRS = libvtoc libzds libdasd libccw libvmcp libekmfweb \
 	   libkmipclient libcpumf libap libpv libzpci
 TOOL_DIRS = zipl zdump fdasd dasdfmt dasdview tunedasd \
-	   tape390 osasnmpd qetharp ip_watcher qethconf scripts zconf \
+	   osasnmpd qetharp ip_watcher qethconf scripts zconf \
 	   vmcp man mon_tools dasdinfo vmur cpuplugd ipl_tools \
 	   ziomon iucvterm hyptop cmsfs-fuse qethqoat zfcpdump zdsfs cpumf \
 	   systemd hmcdrvfs cpacfstats zdev dump2tar zkey netboot etc zpcictl \

README.md

@@ -30,6 +30,8 @@ Package contents
      Manage secrets for IBM Secure Execution guests
    - pvimg:
      Create and inspect IBM Secure Execution images
+   - pvebc:
+     Verify a secret structure for IBM Secure Execution for Linux.
 
  * dasdfmt:
    Low-level format ECKD DASDs with the classical Linux disk layout or the new
@@ -50,6 +52,10 @@ Package contents
    Create an IBM Secure Execution (protected virtualization) image. The
    genprotimg command is a symbolic link to the `pvimg create` command.
 
+ * pvics:
+   Convert a qcow2 image to a qcow2 image ready to boot as IBM Secure Execution
+   for Linux guest.
+
  * udev rules:
    - 59-dasd.rules: rules for unique DASD device nodes created in /dev/disk/.
    - 57-osasnmpd.rules: udev rules for osasnmpd.
@@ -79,13 +85,6 @@ Package contents
  * qetharp:
    Read and flush the ARP cache on OSA Express network cards.
 
- * tape390_display:
-   Display information on the message display facility of a s390 tape
-   device.
-
- * tape390_crypt:
-   Control and query crypto settings for 3592 tape devices.
-
  * osasnmpd:
    NET-SNMP subagent implementing MIBs provided by OSA-Express
    features Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet.

common.mak

@@ -32,7 +32,7 @@ endif
 # The variable "DISTRELEASE" should be overwritten in rpm spec files with:
 # "make DISTRELEASE=%{release}" and "make install DISTRELEASE=%{release}"
 VERSION            := 2
-RELEASE            := 41
+RELEASE            := 42
 PATCHLEVEL         := 0
 DISTRELEASE        := build-$(shell date +%Y%m%d)
 S390_TOOLS_RELEASE := $(VERSION).$(RELEASE).$(PATCHLEVEL)-$(DISTRELEASE)

cpumf/autocompletion_generator_host.c

@@ -1,11 +1,7 @@
-// SPDX-License-Identifier: MIT
 /*
- * Autocompletion generation - for cpumf family of tools
+ * SPDX-License-Identifier: MIT
  *
- * Copyright IBM Corp. 2025
+ * Copyright IBM Corp.
- *
- * s390-tools is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See LICENSE for details.
  */
 
 #include "lib/util_autocomp.h"

cpumf/chcpumf_cli.h

@@ -1,11 +1,7 @@
-/* SPDX-License-Identifier: MIT */
 /*
- * Command line utilities - for chcpumf
+ * SPDX-License-Identifier: MIT
  *
- * Copyright IBM Corp. 2025
+ * Copyright IBM Corp.
- *
- * s390-tools is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See LICENSE for details.
  */
 
 #ifndef CHCPUMF_CLI_H

cpumf/lscpumf_cli.h

@@ -1,11 +1,7 @@
-/* SPDX-License-Identifier: MIT */
 /*
- * Command line utilities - for lscpumf
+ * SPDX-License-Identifier: MIT
  *
- * Copyright IBM Corp. 2025
+ * Copyright IBM Corp.
- *
- * s390-tools is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See LICENSE for details.
  */
 
 #ifndef LSCPUMF_CLI_H

cpumf/lshwc.c

@@ -700,7 +700,7 @@ static int do_it(char *s)
 
 	if (output_format == FMT_CSV)
 		flags |= FMT_NOMETA;
-	if (output_format == FMT_JSON || output_format == FMT_JSONSEQ)
+	if (util_fmt_is_json(output_format))
 		flags |= FMT_HANDLEINT;
 	if (quote_all)
 		flags |= FMT_QUOTEALL;
@@ -708,7 +708,7 @@ static int do_it(char *s)
 	mk_labels();
 	util_fmt_init(stdout, output_format, flags, 1);
 	util_fmt_obj_start(FMT_DEFAULT, "lshwc");
-	if (output_format == FMT_JSON || output_format == FMT_JSONSEQ) {
+	if (util_fmt_is_json(output_format)) {
 		util_fmt_obj_start(FMT_ROW, "cpumcf info");
 		util_fmt_pair(FMT_PERSIST, "counter first", "%d", cfvn);
 		util_fmt_pair(FMT_PERSIST, "counter second", "%d", csvn);

cpumf/lshwc_cli.h

@@ -1,11 +1,7 @@
-/* SPDX-License-Identifier: MIT */
 /*
- * Command line utilities - for lshwc
+ * SPDX-License-Identifier: MIT
  *
- * Copyright IBM Corp. 2025
+ * Copyright IBM Corp.
- *
- * s390-tools is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See LICENSE for details.
  */
 
 #ifndef LSHWC_CLI_H

cpumf/lspai_cli.h

@@ -1,11 +1,7 @@
-/* SPDX-License-Identifier: MIT */
 /*
- * Command line utilities - for lspai
+ * SPDX-License-Identifier: MIT
  *
- * Copyright IBM Corp. 2025
+ * Copyright IBM Corp.
- *
- * s390-tools is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See LICENSE for details.
  */
 
 #ifndef LSPAI_CLI_H

cpumf/man/lshwc.8

@@ -138,7 +138,7 @@ Apply quoting to every output element, regardless of content or format.
 .TP
 .BR \-f ", " \-\-format \fI\ FORMAT\fP
 Retrieve output in one of the following formats:
-JSON, CSV, JSON-SEQ or PAIRS.
+JSON, CSV, JSON-SEQ, JSONL or PAIRS.
 If no format is specified, the output defaults to CSV.
 .
 .SS JSON Output Structure

cpumf/man/lspai.8

@@ -136,7 +136,7 @@ Default sort order is PAI counter name.
 .TP
 .BI \-\-format "\ FORMAT"
 Retrieve output in one of the following formats:
-JSON, csv, json-seq or pairs.
+JSON, csv, json-seq, jsonl or pairs.
 If no format is specified,
 the output defaults to a human-readable format.
 .

cpumf/pai.c

@@ -14,6 +14,7 @@
 #include <fcntl.h>
 #include <limits.h>
 #include <sched.h>
+#include <signal.h>
 #include <stdarg.h>
 #include <stdbool.h>
 #include <stdint.h>
@@ -47,6 +48,8 @@
 #define S390_EVT_PAI_CRYPTO	0x1000
 #define S390_EVT_PAI_NNPA	0x1800
 
+/* SIGINT or SIGTERM signal received */
+static volatile unsigned int sigterm;
 /* Default values for select() timeout: 1 second */
 static unsigned long read_interval = 1000;
 /* Size of mapped perf event ring buffer in 4KB pages.
@@ -350,6 +353,10 @@ static int collect(unsigned long cnt)
 				if (FD_ISSET(i, &r_fds))
 					readmap(i);
 			}
+		} else if (errno == EINTR && sigterm) {
+			/* Interrupt by signal SIGINT/SIGTERM, one more iteration */
+			cnt = 2;
+			rc = 0;
 		}
 	} while (rc != -1 && --cnt > 0);
 	return rc;
@@ -983,6 +990,12 @@ static void setprio(const char *prio)
 		err(EXIT_FAILURE, "Could not set realtime priority");
 }
 
+static void sig_handler(int no)
+{
+	if (no == SIGINT || no == SIGTERM)
+		sigterm = 1;
+}
+
 int main(int argc, char **argv)
 {
 	bool crypto_record = false, report = false;
@@ -1070,6 +1083,10 @@ int main(int argc, char **argv)
 				errx(EXIT_FAILURE, "Invalid argument for runtime");
 		}
 
+		if (signal(SIGTERM, sig_handler) == SIG_ERR ||
+		    signal(SIGINT, sig_handler) == SIG_ERR)
+			errx(EXIT_FAILURE, "Failed to set signal handler");
+
 		ev_install(group);
 		ev_enable();
 

cpumf/pai_cli.h

@@ -1,11 +1,7 @@
-/* SPDX-License-Identifier: MIT */
 /*
- * Command line utilities - for pai
+ * SPDX-License-Identifier: MIT
  *
- * Copyright IBM Corp. 2025
+ * Copyright IBM Corp.
- *
- * s390-tools is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See LICENSE for details.
  */
 
 #ifndef PAI_CLI_H

dasdfmt/autocompletion_generator_host.c

@@ -1,11 +1,7 @@
-// SPDX-License-Identifier: MIT
 /*
- * Autocompletion generation - for dasdfmt tool
+ * SPDX-License-Identifier: MIT
  *
- * Copyright IBM Corp. 2025
+ * Copyright IBM Corp.
- *
- * s390-tools is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See LICENSE for details.
  */
 
 #include "lib/util_autocomp.h"

dasdfmt/dasdfmt_cli.h

@@ -1,11 +1,7 @@
-/* SPDX-License-Identifier: MIT */
 /*
- * Command line utilities - for dasdfmt
+ * SPDX-License-Identifier: MIT
  *
- * Copyright IBM Corp. 2025
+ * Copyright IBM Corp.
- *
- * s390-tools is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See LICENSE for details.
  */
 
 #ifndef DASDFMT_CLI_H

dasdinfo/Makefile

@@ -1,5 +1,10 @@
 include ../common.mak
 
+zsh-completions = _dasdinfo
+bash-completions = dasdinfo.bash
+
+include ../common_autocomp.mak
+
 libs = $(rootdir)/libutil/libutil.a \
        $(rootdir)/libdasd/libdasd.a
 

dasdinfo/autocompletion_generator_host.c

@@ -0,0 +1,16 @@
+/*
+ * SPDX-License-Identifier: MIT
+ *
+ * Copyright IBM Corp.
+ */
+
+#include "lib/util_autocomp.h"
+
+#include "dasdinfo_cli.h"
+
+int main(void)
+{
+	generate_autocomp(opt_vec, "dasdinfo");
+
+	return 0;
+}

dasdinfo/dasdinfo.c

@@ -30,6 +30,8 @@
 #include "lib/util_path.h"
 #include "lib/zt_common.h"
 
+#include "dasdinfo_cli.h"
+
 #define RD_BUFFER_SIZE 80
 #define TEMP_DEV_MAX_RETRIES    1000
 
@@ -50,49 +52,6 @@ static const struct util_prg prg = {
 	}
 };
 
-static struct util_opt opt_vec[] = {
-	UTIL_OPT_SECTION("DEVICE"),
-	{
-		.option = { "block", required_argument, NULL, 'b' },
-		.argument = "BLOCKDEV",
-		.desc = "Block device name, e.g. dasdb",
-	},
-	{
-		.option = { "devnode", required_argument, NULL, 'd' },
-		.argument = "DEVNODE",
-		.desc = "Device node, e.g. /dev/dasda",
-	},
-	{
-		.option = { "busid", required_argument, NULL, 'i' },
-		.argument = "BUSID",
-		.desc = "Bus ID, e.g. 0.0.e910",
-	},
-	UTIL_OPT_SECTION("OPTIONS"),
-	{
-		.option = { "label", no_argument, NULL, 'l' },
-		.desc = "Print DASD volume label (volser)",
-	},
-	{
-		.option = { "uid", no_argument, NULL, 'u' },
-		.desc = "Print DASD uid (without z/VM minidisk token)",
-	},
-	{
-		.option = { "extended-uid", no_argument, NULL, 'x' },
-		.desc = "Print DASD uid (including z/VM minidisk token)",
-	},
-	{
-		.option = { "all", no_argument, NULL, 'a' },
-		.desc = "Same as -u -x -l",
-	},
-	{
-		.option = { "export", no_argument, NULL, 'e' },
-		.desc = "Export ID_BUS, ID_TYPE, ID_SERIAL for use in udev",
-	},
-	UTIL_OPT_HELP,
-	UTIL_OPT_VERSION,
-	UTIL_OPT_END
-};
-
 /* needed because ftw can not pass arbitrary arguments */
 static char *searchbusid;
 static char *busiddir;
@@ -101,9 +60,9 @@ struct volume_label {
 	char volkey[4];
 	char vollbl[4];
 	char volid[6];
-} __attribute__ ((packed));
+} __packed;
 
-static char EBCtoASC[256] = {
+static char ebc_to_asc[256] = {
 /* 0x00  NUL   SOH   STX   ETX  *SEL    HT  *RNL   DEL */
 	0x00, 0x01, 0x02, 0x03, 0x07, 0x09, 0x07, 0x7F,
 /* 0x08  -GE  -SPS  -RPT    VT    FF    CR    SO    SI */
@@ -175,7 +134,7 @@ static char *dinfo_ebcdic_dec(char *source, char *target, int l)
 	int i;
 
 	for (i = 0; i < l; i++)
-		target[i] = EBCtoASC[(unsigned char)(source[i])];
+		target[i] = ebc_to_asc[(unsigned char)(source[i])];
 
 	return target;
 }
@@ -261,7 +220,7 @@ static void *dinfo_malloc(size_t size)
 	void *result;
 
 	result = malloc(size);
-	if (result == NULL)
+	if (!result)
 		warnx("Could not allocate %lu bytes of memory", size);
 
 	return result;
@@ -274,7 +233,7 @@ static char *dinfo_make_path(char *dirname, char *filename)
 
 	len = strlen(dirname) + strlen(filename) + 2;
 	result = (char *)dinfo_malloc(len);
-	if (result == NULL)
+	if (!result)
 		return NULL;
 	sprintf(result, "%s/%s", dirname, filename);
 	return result;
@@ -296,12 +255,12 @@ static int dinfo_create_devnode(dev_t dev, char **devno)
 
 	/* Try several locations for the temporary device node. */
 	for (path = 0; path < ARRAY_SIZE(pathname); path++) {
-		if (pathname[path] == NULL)
+		if (!pathname[path])
 			continue;
 		for (retry = 0; retry < TEMP_DEV_MAX_RETRIES; retry++) {
 			snprintf(filename, sizeof(filename), "dasdinfo%04d", retry);
 			result = dinfo_make_path(pathname[path], filename);
-			if (result == NULL)
+			if (!result)
 				return -1;
 			rc = mknod(result, mode, dev);
 			if (rc == 0) {
@@ -342,7 +301,7 @@ static int dinfo_extract_dev(dev_t *dev, char *str)
 	memset(tmp, 0, RD_BUFFER_SIZE);
 	util_strlcpy(tmp, str, RD_BUFFER_SIZE);
 	p = strchr(tmp, ':');
-	if (p == NULL) {
+	if (!p) {
 		warnx("Error: unable to extract major/minor");
 		return -1;
 	}
@@ -401,14 +360,14 @@ dinfo_is_busiddir(const char *fpath, const struct stat *UNUSED(sb),
 		return -1;
 	linkdir = util_readlink(tempdir);
 	free(tempdir);
-	if (strstr(linkdir, "dasd") == NULL) {
+	if (!strstr(linkdir, "dasd")) {
 		free(linkdir);
 		return FTW_CONTINUE;
 	}
 	free(linkdir);
 	free(busiddir);
 	busiddir = strdup(fpath);
-	if (busiddir == NULL)
+	if (!busiddir)
 		return -1;
 	return FTW_STOP;
 }
@@ -421,7 +380,7 @@ dinfo_find_entry(const char *dir, const char *searchstring,
 	struct dirent *dir_entry = NULL;
 
 	directory = opendir(dir);
-	if (directory == NULL)
+	if (!directory)
 		return -1;
 	while ((dir_entry = readdir(directory)) != NULL) {
 		/* compare if the found entry has exactly the same name and type
@@ -431,7 +390,7 @@ dinfo_find_entry(const char *dir, const char *searchstring,
 			     strlen(searchstring)) == 0) &&
 		    (dir_entry->d_type & type)) {
 			*result = strdup(dir_entry->d_name);
-			if (*result == NULL)
+			if (!*result)
 				goto out;
 			closedir(directory);
 			return 0; /* found */
@@ -477,7 +436,7 @@ dinfo_get_blockdev_from_busid(char *busid, char **blkdev)
 		if (rc != 0)
 			goto out2;
 		*blkdev = strdup(strchr(result, ':') + 1);
-		if (*blkdev == NULL)
+		if (!*blkdev)
 			rc = -1;
 	}
 
@@ -510,7 +469,7 @@ static int dinfo_get_uid_from_devnode(char **uidfile, char *devnode)
 
 	path = util_path_sysfs("block/");
 	directory = opendir(path);
-	if (directory == NULL) {
+	if (!directory) {
 		warnx("Error: could not open directory %s", path);
 		free(path);
 		return -1;
@@ -550,8 +509,6 @@ static int dinfo_get_uid_from_devnode(char **uidfile, char *devnode)
 
 int main(int argc, char *argv[])
 {
-	struct utsname uname_buf;
-	int version, release;
 	char *uidfile = NULL;
 	char *device = NULL;
 	char *readbuf = NULL;
@@ -611,35 +568,19 @@ int main(int argc, char *argv[])
 			util_prg_print_version();
 			exit(EXIT_SUCCESS);
 		default:
-			fprintf(stderr, "Try 'dasdinfo --help' for more "
+			fprintf(stderr, "Try 'dasdinfo --help' for more information.\n");
-				"information.\n");
 			exit(1);
 		}
 	}
 
-	uname(&uname_buf);
+	if (!busid && !blockdev && !devnode)
-	sscanf(uname_buf.release, "%d.%d", &version, &release);
+		errx(EXIT_FAILURE, "Error: please specify a device using either -b, -i or -d");
-	if (strcmp(uname_buf.sysname, "Linux") ||
-	    version < 2 || (version == 2 && release < 6)) {
-		warnx("%s %d.%d is not supported", uname_buf.sysname,
-		      version, release);
-		exit(1);
-	}
 
-	if (!busid && !blockdev && !devnode) {
+	if ((busid && blockdev) || (busid && devnode) || (blockdev && devnode))
-		warnx("Error: please specify a device using either -b, -i or -d");
+		errx(EXIT_FAILURE, "Error: please specify device only once,  either -b, -i or -d");
-		exit(1);
-	}
 
-	if ((busid && blockdev) || (busid && devnode) || (blockdev && devnode)) {
+	if (!print_uid && !print_extended_uid && !print_vlabel)
-		warnx("Error: please specify device only once,  either -b, -i or -d");
+		errx(EXIT_FAILURE, "Error: no action specified (e.g. -u)");
-		exit(1);
-	}
-
-	if (!print_uid && !print_extended_uid && !print_vlabel) {
-		warnx("Error: no action specified (e.g. -u)");
-		exit(1);
-	}
 
 	readbuf = dinfo_malloc(RD_BUFFER_SIZE);
 	if (!readbuf)

dasdinfo/dasdinfo_cli.h

@@ -0,0 +1,55 @@
+/*
+ * SPDX-License-Identifier: MIT
+ *
+ * Copyright IBM Corp.
+ */
+
+#ifndef DASDINFO_CLI_H
+#define DASDINFO_CLI_H
+
+#include "lib/util_opt.h"
+
+static struct util_opt opt_vec[] = {
+	UTIL_OPT_SECTION("DEVICE"),
+	{
+		.option = { "block", required_argument, NULL, 'b' },
+		.argument = "BLOCKDEV",
+		.desc = "Block device name, e.g. dasdb",
+	},
+	{
+		.option = { "devnode", required_argument, NULL, 'd' },
+		.argument = "DEVNODE",
+		.desc = "Device node, e.g. /dev/dasda",
+	},
+	{
+		.option = { "busid", required_argument, NULL, 'i' },
+		.argument = "BUSID",
+		.desc = "Bus ID, e.g. 0.0.e910",
+	},
+	UTIL_OPT_SECTION("OPTIONS"),
+	{
+		.option = { "label", no_argument, NULL, 'l' },
+		.desc = "Print DASD volume label (volser)",
+	},
+	{
+		.option = { "uid", no_argument, NULL, 'u' },
+		.desc = "Print DASD uid (without z/VM minidisk token)",
+	},
+	{
+		.option = { "extended-uid", no_argument, NULL, 'x' },
+		.desc = "Print DASD uid (including z/VM minidisk token)",
+	},
+	{
+		.option = { "all", no_argument, NULL, 'a' },
+		.desc = "Same as -u -x -l",
+	},
+	{
+		.option = { "export", no_argument, NULL, 'e' },
+		.desc = "Export ID_BUS, ID_TYPE, ID_SERIAL for use in udev",
+	},
+	UTIL_OPT_HELP,
+	UTIL_OPT_VERSION,
+	UTIL_OPT_END
+};
+
+#endif

dasdview/Makefile

@@ -1,5 +1,10 @@
 include ../common.mak
 
+zsh-completions = _dasdview
+bash-completions = dasdview.bash
+
+include ../common_autocomp.mak
+
 libs =	$(rootdir)/libdasd/libdasd.a \
 	$(rootdir)/libzds/libzds.a \
 	$(rootdir)/libvtoc/libvtoc.a \

dasdview/autocompletion_generator_host.c

@@ -0,0 +1,16 @@
+/*
+ * SPDX-License-Identifier: MIT
+ *
+ * Copyright IBM Corp.
+ */
+
+#include "lib/util_autocomp.h"
+
+#include "dasdview_cli.h"
+
+int main(void)
+{
+	generate_autocomp(opt_vec, "dasdview");
+
+	return 0;
+}

dasdview/dasdview.c

@@ -37,6 +37,7 @@
 #include "lib/zt_common.h"
 
 #include "dasdview.h"
+#include "dasdview_cli.h"
 
 /* Characters per line */
 #define DASDVIEW_CPL 16
@@ -56,61 +57,6 @@ static const struct util_prg prg = {
 	}
 };
 
-static struct util_opt opt_vec[] = {
-	UTIL_OPT_SECTION("DUMP OPTIONS"),
-	{
-		.option = { NULL, no_argument, NULL, '1' },
-		.desc = "Show DASD content in short Hex/EBCDIC/ASCII format",
-		.flags = UTIL_OPT_FLAG_NOLONG,
-	},
-	{
-		.option = { NULL, no_argument, NULL, '2' },
-		.desc = "Show DASD content in detailed Hex/EBCDIC/ASCII format",
-		.flags = UTIL_OPT_FLAG_NOLONG,
-	},
-	{
-		.option = { "begin", required_argument, NULL, 'b' },
-		.argument = "BEGIN",
-		.desc = "Specify start of dump in kilobytes (suffix k), "
-			"megabytes (m), blocks (b), tracks (t), or cylinders (c)",
-	},
-	{
-		.option = { "size", required_argument, NULL, 's' },
-		.argument = "SIZE",
-		.desc = "Specify size of dump in kilobytes (suffix k), "
-			"megabytes (m), blocks (b), tracks (t), or cylinders (c)",
-	},
-	UTIL_OPT_SECTION("MISC"),
-	{
-		.option = { "characteristic", no_argument, NULL, 'c' },
-		.desc = "Print the characteristics of a device",
-	},
-	{
-		.option = { "info", no_argument, NULL, 'i' },
-		.desc = "Print general DASD information and geometry",
-	},
-	{
-		.option = { "volser", no_argument, NULL, 'j' },
-		.desc = "Print the volume serial number",
-	},
-	{
-		.option = { "label", no_argument, NULL, 'l' },
-		.desc = "Print information about the volume label",
-	},
-	{
-		.option = { "vtoc", required_argument, NULL, 't' },
-		.argument = "SPEC",
-		.desc = "Print the table of content (VTOC)",
-	},
-	{
-		.option = { "extended", no_argument, NULL, 'x' },
-		.desc = "Print extended DASD information",
-	},
-	UTIL_OPT_HELP,
-	UTIL_OPT_VERSION,
-	UTIL_OPT_END
-};
-
 /*
  * Generate and print an error message based on the formatted
  * text string FMT and a variable amount of extra arguments.

dasdview/dasdview_cli.h

@@ -0,0 +1,67 @@
+/*
+ * SPDX-License-Identifier: MIT
+ *
+ * Copyright IBM Corp.
+ */
+
+#ifndef DASDVIEW_CLI_H
+#define DASDVIEW_CLI_H
+
+#include "lib/util_opt.h"
+
+static struct util_opt opt_vec[] = {
+	UTIL_OPT_SECTION("DUMP OPTIONS"),
+	{
+		.option = { NULL, no_argument, NULL, '1' },
+		.desc = "Show DASD content in short Hex/EBCDIC/ASCII format",
+		.flags = UTIL_OPT_FLAG_NOLONG,
+	},
+	{
+		.option = { NULL, no_argument, NULL, '2' },
+		.desc = "Show DASD content in detailed Hex/EBCDIC/ASCII format",
+		.flags = UTIL_OPT_FLAG_NOLONG,
+	},
+	{
+		.option = { "begin", required_argument, NULL, 'b' },
+		.argument = "BEGIN",
+		.desc = "Specify start of dump in kilobytes (suffix k), "
+			"megabytes (m), blocks (b), tracks (t), or cylinders (c)",
+	},
+	{
+		.option = { "size", required_argument, NULL, 's' },
+		.argument = "SIZE",
+		.desc = "Specify size of dump in kilobytes (suffix k), "
+			"megabytes (m), blocks (b), tracks (t), or cylinders (c)",
+	},
+	UTIL_OPT_SECTION("MISC"),
+	{
+		.option = { "characteristic", no_argument, NULL, 'c' },
+		.desc = "Print the characteristics of a device",
+	},
+	{
+		.option = { "info", no_argument, NULL, 'i' },
+		.desc = "Print general DASD information and geometry",
+	},
+	{
+		.option = { "volser", no_argument, NULL, 'j' },
+		.desc = "Print the volume serial number",
+	},
+	{
+		.option = { "label", no_argument, NULL, 'l' },
+		.desc = "Print information about the volume label",
+	},
+	{
+		.option = { "vtoc", required_argument, NULL, 't' },
+		.argument = "SPEC",
+		.desc = "Print the table of content (VTOC)",
+	},
+	{
+		.option = { "extended", no_argument, NULL, 'x' },
+		.desc = "Print extended DASD information",
+	},
+	UTIL_OPT_HELP,
+	UTIL_OPT_VERSION,
+	UTIL_OPT_END
+};
+
+#endif

dump2tar/include/dump2tar_cli.h

@@ -0,0 +1,136 @@
+/*
+ * SPDX-License-Identifier: MIT
+ *
+ * Copyright IBM Corp.
+ */
+
+#ifndef DUMP2TAR_CLI_H
+#define DUMP2TAR_CLI_H
+
+#include "lib/util_opt.h"
+
+#define	OPT_NOSHORT_BASE	256
+
+#define	OPT_DEREFERENCE		(OPT_NOSHORT_BASE + 0)
+#define OPT_NORECURSION		(OPT_NOSHORT_BASE + 1)
+#define OPT_EXCLUDETYPE		(OPT_NOSHORT_BASE + 2)
+
+/* Definition of command line options */
+static struct util_opt dump2tar_opts[] = {
+	UTIL_OPT_SECTION("OUTPUT OPTIONS"),
+	{
+		.option = { "output-file", required_argument, NULL, 'o' },
+		.argument = "FILE",
+		.desc = "Write archive to FILE (default: standard output)",
+	},
+#ifdef HAVE_ZLIB
+	{
+		.option = { "gzip", no_argument, NULL, 'z' },
+		.desc = "Write a gzip compressed archive",
+	},
+#endif /* HAVE_ZLIB */
+	{
+		.option = { "max-size", required_argument, NULL, 'm' },
+		.argument = "N",
+		.desc = "Stop adding files when archive size exceeds N bytes",
+	},
+	{
+		.option = { "timeout", required_argument, NULL, 't' },
+		.argument = "SEC",
+		.desc = "Stop adding files after SEC seconds",
+	},
+	{
+		.option = { "no-eof", no_argument, NULL, 131 },
+		.desc = "Do not write an end-of-file marker",
+		.flags = UTIL_OPT_FLAG_NOSHORT,
+	},
+	{
+		.option = { "add-cmd-status", no_argument, NULL, 132 },
+		.desc = "Add status of commands as separate file",
+		.flags = UTIL_OPT_FLAG_NOSHORT,
+	},
+	{
+		.option = { "append", no_argument, NULL, 133 },
+		.desc = "Append output to end of file",
+		.flags = UTIL_OPT_FLAG_NOSHORT,
+	},
+
+	UTIL_OPT_SECTION("INPUT OPTIONS"),
+	{
+		.option = { "files-from", required_argument, NULL, 'F' },
+		.argument = "FILE",
+		.desc = "Read filenames from FILE (- for standard input)",
+	},
+	{
+		.option = { "ignore-failed-read", no_argument, NULL, 'i' },
+		.desc = "Continue after read errors",
+	},
+	{
+		.option = { "buffer-size", required_argument, NULL, 'b' },
+		.argument = "N",
+		.desc = "Read data in chunks of N byte (default: 16384)",
+	},
+	{
+		.option = { "file-timeout", required_argument, NULL, 'T' },
+		.desc = "Stop reading file after SEC seconds",
+		.argument = "SEC",
+	},
+	{
+		.option = { "file-max-size", required_argument, NULL, 'M' },
+		.argument = "N",
+		.desc = "Stop reading file after N bytes",
+	},
+	{
+		.option = { "jobs", required_argument, NULL, 'j' },
+		.argument = "N",
+		.desc = "Read N files in parallel (default: 1)",
+	},
+	{
+		.option = { "jobs-per-cpu", required_argument, NULL, 'J' },
+		.argument = "N",
+		.desc = "Read N files per CPU in parallel",
+	},
+	{
+		.option = { "exclude", required_argument, NULL, 'x' },
+		.argument = "PATTERN",
+		.desc = "Don't add files matching PATTERN",
+	},
+	{
+		.option = { "exclude-from", required_argument, NULL, 'X' },
+		.argument = "FILE",
+		.desc = "Don't add files matching patterns in FILE",
+	},
+	{
+		.option = { "exclude-type", required_argument, NULL,
+			    OPT_EXCLUDETYPE },
+		.argument = "TYPE",
+		.desc = "Don't add files of specified TYPE (one of: fdcbpls)",
+		.flags = UTIL_OPT_FLAG_NOSHORT,
+	},
+	{
+		.option = { "dereference", no_argument, NULL, OPT_DEREFERENCE },
+		.desc = "Add link targets instead of links",
+		.flags = UTIL_OPT_FLAG_NOSHORT,
+	},
+	{
+		.option = { "no-recursion", no_argument, NULL,
+			    OPT_NORECURSION },
+		.desc = "Don't add files from sub-directories",
+		.flags = UTIL_OPT_FLAG_NOSHORT,
+	},
+
+	UTIL_OPT_SECTION("MISC OPTIONS"),
+	UTIL_OPT_HELP,
+	UTIL_OPT_VERSION,
+	{
+		.option = { "verbose", no_argument, NULL, 'V' },
+		.desc = "Print additional informational output",
+	},
+	{
+		.option = { "quiet", no_argument, NULL, 'q' },
+		.desc = "Suppress printing of informational output",
+	},
+	UTIL_OPT_END,
+};
+
+#endif

dump2tar/src/Makefile

@@ -1,6 +1,11 @@
 # Common definitions
 include ../../common.mak
 
+zsh-completions = _dump2tar
+bash-completions = dump2tar.bash
+
+include ../../common_autocomp.mak
+
 ALL_CPPFLAGS += -I../include -Wno-unused-parameter
 LDLIBS  += -lpthread -lrt
 ifneq ($(HAVE_ZLIB),0)

dump2tar/src/autocompletion_generator_host.c

@@ -0,0 +1,16 @@
+/*
+ * SPDX-License-Identifier: MIT
+ *
+ * Copyright IBM Corp.
+ */
+
+#include "lib/util_autocomp.h"
+
+#include "../include/dump2tar_cli.h"
+
+int main(void)
+{
+	generate_autocomp(dump2tar_opts, "dump2tar");
+
+	return 0;
+}

dump2tar/src/dump2tar.c

@@ -21,6 +21,7 @@
 #include "lib/util_prg.h"
 
 #include "dump.h"
+#include "dump2tar_cli.h"
 #include "global.h"
 #include "idcache.h"
 #include "misc.h"
@@ -28,12 +29,6 @@
 
 #define MIN_BUFFER_SIZE		4096
 
-#define	OPT_NOSHORT_BASE	256
-
-#define	OPT_DEREFERENCE		(OPT_NOSHORT_BASE + 0)
-#define OPT_NORECURSION		(OPT_NOSHORT_BASE + 1)
-#define OPT_EXCLUDETYPE		(OPT_NOSHORT_BASE + 2)
-
 /* Program description */
 static const struct util_prg dump2tar_prg = {
 	.desc = "Use dump2tar to create a tar archive from the contents "
@@ -52,124 +47,6 @@ static const struct util_prg dump2tar_prg = {
 	},
 };
 
-/* Definition of command line options */
-static struct util_opt dump2tar_opts[] = {
-	UTIL_OPT_SECTION("OUTPUT OPTIONS"),
-	{
-		.option = { "output-file", required_argument, NULL, 'o' },
-		.argument = "FILE",
-		.desc = "Write archive to FILE (default: standard output)",
-	},
-#ifdef HAVE_ZLIB
-	{
-		.option = { "gzip", no_argument, NULL, 'z' },
-		.desc = "Write a gzip compressed archive",
-	},
-#endif /* HAVE_ZLIB */
-	{
-		.option = { "max-size", required_argument, NULL, 'm' },
-		.argument = "N",
-		.desc = "Stop adding files when archive size exceeds N bytes",
-	},
-	{
-		.option = { "timeout", required_argument, NULL, 't' },
-		.argument = "SEC",
-		.desc = "Stop adding files after SEC seconds",
-	},
-	{
-		.option = { "no-eof", no_argument, NULL, 131 },
-		.desc = "Do not write an end-of-file marker",
-		.flags = UTIL_OPT_FLAG_NOSHORT,
-	},
-	{
-		.option = { "add-cmd-status", no_argument, NULL, 132 },
-		.desc = "Add status of commands as separate file",
-		.flags = UTIL_OPT_FLAG_NOSHORT,
-	},
-	{
-		.option = { "append", no_argument, NULL, 133 },
-		.desc = "Append output to end of file",
-		.flags = UTIL_OPT_FLAG_NOSHORT,
-	},
-
-	UTIL_OPT_SECTION("INPUT OPTIONS"),
-	{
-		.option = { "files-from", required_argument, NULL, 'F' },
-		.argument = "FILE",
-		.desc = "Read filenames from FILE (- for standard input)",
-	},
-	{
-		.option = { "ignore-failed-read", no_argument, NULL, 'i' },
-		.desc = "Continue after read errors",
-	},
-	{
-		.option = { "buffer-size", required_argument, NULL, 'b' },
-		.argument = "N",
-		.desc = "Read data in chunks of N byte (default: 16384)",
-	},
-	{
-		.option = { "file-timeout", required_argument, NULL, 'T' },
-		.desc = "Stop reading file after SEC seconds",
-		.argument = "SEC",
-	},
-	{
-		.option = { "file-max-size", required_argument, NULL, 'M' },
-		.argument = "N",
-		.desc = "Stop reading file after N bytes",
-	},
-	{
-		.option = { "jobs", required_argument, NULL, 'j' },
-		.argument = "N",
-		.desc = "Read N files in parallel (default: 1)",
-	},
-	{
-		.option = { "jobs-per-cpu", required_argument, NULL, 'J' },
-		.argument = "N",
-		.desc = "Read N files per CPU in parallel",
-	},
-	{
-		.option = { "exclude", required_argument, NULL, 'x' },
-		.argument = "PATTERN",
-		.desc = "Don't add files matching PATTERN",
-	},
-	{
-		.option = { "exclude-from", required_argument, NULL, 'X' },
-		.argument = "FILE",
-		.desc = "Don't add files matching patterns in FILE",
-	},
-	{
-		.option = { "exclude-type", required_argument, NULL,
-			    OPT_EXCLUDETYPE },
-		.argument = "TYPE",
-		.desc = "Don't add files of specified TYPE (one of: fdcbpls)",
-		.flags = UTIL_OPT_FLAG_NOSHORT,
-	},
-	{
-		.option = { "dereference", no_argument, NULL, OPT_DEREFERENCE },
-		.desc = "Add link targets instead of links",
-		.flags = UTIL_OPT_FLAG_NOSHORT,
-	},
-	{
-		.option = { "no-recursion", no_argument, NULL,
-			    OPT_NORECURSION },
-		.desc = "Don't add files from sub-directories",
-		.flags = UTIL_OPT_FLAG_NOSHORT,
-	},
-
-	UTIL_OPT_SECTION("MISC OPTIONS"),
-	UTIL_OPT_HELP,
-	UTIL_OPT_VERSION,
-	{
-		.option = { "verbose", no_argument, NULL, 'V' },
-		.desc = "Print additional informational output",
-	},
-	{
-		.option = { "quiet", no_argument, NULL, 'q' },
-		.desc = "Suppress printing of informational output",
-	},
-	UTIL_OPT_END,
-};
-
 /* Split buffer size specification in @arg into two numbers to be stored in
  * @from_ptr and @to_ptr. Return %EXIT_OK on success. */
 static int parse_buffer_size(char *arg, size_t *from_ptr, size_t *to_ptr)

fdasd/Makefile

@@ -1,5 +1,10 @@
 include ../common.mak
 
+zsh-completions = _fdasd
+bash-completions = fdasd.bash
+
+include ../common_autocomp.mak
+
 libs =	$(rootdir)/libvtoc/libvtoc.a \
 	$(rootdir)/libzds/libzds.a \
 	$(rootdir)/libdasd/libdasd.a \

fdasd/autocompletion_generator_host.c

@@ -0,0 +1,16 @@
+/*
+ * SPDX-License-Identifier: MIT
+ *
+ * Copyright IBM Corp.
+ */
+
+#include "lib/util_autocomp.h"
+
+#include "fdasd_cli.h"
+
+int main(void)
+{
+	generate_autocomp(opt_vec, "fdasd");
+
+	return 0;
+}

fdasd/fdasd.c

@@ -21,6 +21,7 @@
 #include "lib/zt_common.h"
 
 #include "fdasd.h"
+#include "fdasd_cli.h"
 
 /* global variables */
 static struct hd_geometry geo;
@@ -138,58 +139,6 @@ static const struct util_prg prg = {
 	}
 };
 
-static struct util_opt opt_vec[] = {
-	UTIL_OPT_SECTION("NON-INTERACTIVE MODE"),
-	{
-		.option = { "auto", no_argument, NULL, 'a' },
-		.desc = "Create a single partition spanning the entire disk",
-	},
-	{
-		.option = { "config", required_argument, NULL, 'c' },
-		.argument = "FILE",
-		.desc = "Create partitions(s) based on content of FILE",
-	},
-	{
-		.option = { "keep_volser", no_argument, NULL, 'k' },
-		.desc = "Do not change the current volume serial",
-	},
-	{
-		.option = { "label", required_argument, NULL, 'l' },
-		.argument = "VOLSER",
-		.desc = "Set the volume serial to VOLSER",
-	},
-	UTIL_OPT_SECTION("MISC"),
-	{
-		.option = { "check_host_count", no_argument, NULL, 'C' },
-		.desc = "Check if device is in use by other hosts",
-	},
-	{
-		.option = { "force", optional_argument, NULL, 'f' },
-		.argument = "TYPE,SIZE",
-		.desc = "Force fdasd to work on non DASD devices with assumed "
-			"TYPE (3390, 3380, or 9345) and blocksize SIZE",
-	},
-	{
-		.option = { "volser", no_argument, NULL, 'i' },
-		.desc = "Print volume serial",
-	},
-	{
-		.option = { "table", no_argument, NULL, 'p' },
-		.desc = "Print partition table",
-	},
-	{
-		.option = { "verbose", no_argument, NULL, 'r' },
-		.desc = "Provide more verbose output",
-	},
-	{
-		.option = { "silent", no_argument, NULL, 's' },
-		.desc = "Suppress messages",
-	},
-	UTIL_OPT_HELP,
-	UTIL_OPT_VERSION,
-	UTIL_OPT_END
-};
-
 static int getpos(fdasd_anchor_t *anc, int dsn)
 {
 	return anc->partno[dsn];

fdasd/fdasd_cli.h

@@ -0,0 +1,64 @@
+/*
+ * SPDX-License-Identifier: MIT
+ *
+ * Copyright IBM Corp.
+ */
+
+#ifndef FDASD_CLI_H
+#define FDASD_CLI_H
+
+#include "lib/util_opt.h"
+
+static struct util_opt opt_vec[] = {
+	UTIL_OPT_SECTION("NON-INTERACTIVE MODE"),
+	{
+		.option = { "auto", no_argument, NULL, 'a' },
+		.desc = "Create a single partition spanning the entire disk",
+	},
+	{
+		.option = { "config", required_argument, NULL, 'c' },
+		.argument = "FILE",
+		.desc = "Create partitions(s) based on content of FILE",
+	},
+	{
+		.option = { "keep_volser", no_argument, NULL, 'k' },
+		.desc = "Do not change the current volume serial",
+	},
+	{
+		.option = { "label", required_argument, NULL, 'l' },
+		.argument = "VOLSER",
+		.desc = "Set the volume serial to VOLSER",
+	},
+	UTIL_OPT_SECTION("MISC"),
+	{
+		.option = { "check_host_count", no_argument, NULL, 'C' },
+		.desc = "Check if device is in use by other hosts",
+	},
+	{
+		.option = { "force", optional_argument, NULL, 'f' },
+		.argument = "TYPE,SIZE",
+		.desc = "Force fdasd to work on non DASD devices with assumed "
+			"TYPE (3390, 3380, or 9345) and blocksize SIZE",
+	},
+	{
+		.option = { "volser", no_argument, NULL, 'i' },
+		.desc = "Print volume serial",
+	},
+	{
+		.option = { "table", no_argument, NULL, 'p' },
+		.desc = "Print partition table",
+	},
+	{
+		.option = { "verbose", no_argument, NULL, 'r' },
+		.desc = "Provide more verbose output",
+	},
+	{
+		.option = { "silent", no_argument, NULL, 's' },
+		.desc = "Suppress messages",
+	},
+	UTIL_OPT_HELP,
+	UTIL_OPT_VERSION,
+	UTIL_OPT_END
+};
+
+#endif

hsavmcore/Makefile

@@ -7,6 +7,11 @@
 
 include ../common.mak
 
+zsh-completions = _hsavmcore
+bash-completions = hsavmcore.bash
+
+include ../common_autocomp.mak
+
 ALL_CPPFLAGS += -D_FILE_OFFSET_BITS=64
 
 ifeq (${HAVE_FUSE},0)
@@ -41,7 +46,7 @@ endif
 ALL_CFLAGS += $(FUSE_CFLAGS) $(SYSTEMD_CFLAGS)
 LDLIBS += $(FUSE_LDLIBS) $(SYSTEMD_LDLIBS) -lpthread
 
-sources := $(wildcard *.c)
+sources := $(filter-out %_host.c, $(wildcard *.c))
 objects := $(patsubst %.c,%.o,$(sources))
 
 libs = $(rootdir)/libutil/libutil.a

hsavmcore/autocompletion_generator_host.c

@@ -0,0 +1,16 @@
+/*
+ * SPDX-License-Identifier: MIT
+ *
+ * Copyright IBM Corp.
+ */
+
+#include "lib/util_autocomp.h"
+
+#include "hsavmcore_cli.h"
+
+int main(void)
+{
+	generate_autocomp(opt_vec, "hsavmcore");
+
+	return 0;
+}

hsavmcore/cmdline_options.c

@@ -16,6 +16,7 @@
 #include "lib/util_log.h"
 
 #include "cmdline_options.h"
+#include "hsavmcore_cli.h"
 
 static const struct util_prg prg = {
 	.desc = "hsavmcore is designed to make the dump process with kdump more "
@@ -32,91 +33,6 @@ static const struct util_prg prg = {
 	}
 };
 
-static struct util_opt opt_vec[] = {
-	UTIL_OPT_SECTION("CONFIGURATION"),
-	{
-		.option = { "config", required_argument, NULL, 'c' },
-		.argument = "CONFIGFILE",
-		.desc = "Path to the configuration file.\n"
-			"Default: no configuration file is used",
-	},
-	{
-		.option = { "vmcore", required_argument, NULL, 'C' },
-		.argument = "VMCOREFILE",
-		.desc = "Path to the vmcore file.\n"
-			"Default: " PROC_VMCORE,
-	},
-	{
-		.option = { "hsa", required_argument, NULL, 'H' },
-		.argument = "ZCOREHSAFILE",
-		.desc = "Path to the zcore HSA file.\n"
-			"Default: " ZCORE_HSA,
-	},
-	{
-		.option = { "workdir", required_argument, NULL, 'W' },
-		.argument = "WORKDIR",
-		.desc = "Path to the work directory where temporary files can be "
-			"stored.\nDefault: " WORKDIR,
-	},
-	{
-		.option = { "bmvmcore", required_argument, NULL, 'B' },
-		.argument = "VMCOREFILE",
-		.desc = "Path to the target of the bind mount for the vmcore "
-			"replacement.\nDefault: " PROC_VMCORE,
-	},
-	{
-		.option = { "swap", required_argument, NULL, 'S' },
-		.argument = "PATH",
-		.desc = "Path to a swap device or file. The specified swap "
-			"device or file must exist and have the proper swap "
-			"format.\nDefault: no swap device or file is activated",
-	},
-	{
-		.option = { "hsasize", required_argument, NULL, 'T' },
-		.argument = "HSASIZE",
-		.desc = "HSA size in bytes.\n"
-			"Default: -1 (read from the zcore HSA file)",
-	},
-	{
-		.option = { "dbgfsmnt", no_argument, NULL, 'D' },
-		.desc = "Mount the debug file system.\n"
-			"Default: the debug file system is not mounted",
-	},
-	{
-		.option = { "hsamem", no_argument, NULL, 'F' },
-		.desc = "Cache the HSA memory in regular memory.\n"
-			"Default: the HSA memory is cached as a file within "
-			"WORKDIR",
-	},
-	{
-		.option = { "norelhsa", no_argument, NULL, 'R' },
-		.desc = "Do NOT release the HSA memory after caching.\n"
-			"Default: the HSA memory is released",
-	},
-	{
-		.option = { "nobindmnt", no_argument, NULL, 'N' },
-		.desc = "Do NOT replace the system's vmcore.\n"
-			"Default: the system's vmcore is replaced",
-	},
-	UTIL_OPT_SECTION("LOGGING"),
-	{
-		.option = { "verbose", no_argument, NULL, 'V' },
-		.desc = "Print verbose messages to stdout. Repeat this option "
-			"for increased verbosity from just error messages to "
-			"also include warning,  information, debug, and trace "
-			"messages. This option is intended for debugging",
-	},
-	{
-		.option = { "fusedbg", no_argument, NULL, 'G' },
-		.desc = "Enable FUSE debugging.\n"
-			"Default: FUSE debugging is disabled",
-	},
-	UTIL_OPT_SECTION("GENERAL OPTIONS"),
-	UTIL_OPT_HELP,
-	UTIL_OPT_VERSION,
-	UTIL_OPT_END
-};
-
 void parse_cmdline_options(int argc, char *argv[], struct config *config)
 {
 	int opt, ret;

hsavmcore/hsavmcore_cli.h

@@ -0,0 +1,99 @@
+/*
+ * SPDX-License-Identifier: MIT
+ *
+ * Copyright IBM Corp.
+ */
+
+#ifndef HSAVMCORE_CLI_H
+#define HSAVMCORE_CLI_H
+
+#include "lib/util_opt.h"
+
+#include "common.h"
+
+static struct util_opt opt_vec[] = {
+	UTIL_OPT_SECTION("CONFIGURATION"),
+	{
+		.option = { "config", required_argument, NULL, 'c' },
+		.argument = "CONFIGFILE",
+		.desc = "Path to the configuration file.\n"
+			"Default: no configuration file is used",
+	},
+	{
+		.option = { "vmcore", required_argument, NULL, 'C' },
+		.argument = "VMCOREFILE",
+		.desc = "Path to the vmcore file.\n"
+			"Default: " PROC_VMCORE,
+	},
+	{
+		.option = { "hsa", required_argument, NULL, 'H' },
+		.argument = "ZCOREHSAFILE",
+		.desc = "Path to the zcore HSA file.\n"
+			"Default: " ZCORE_HSA,
+	},
+	{
+		.option = { "workdir", required_argument, NULL, 'W' },
+		.argument = "WORKDIR",
+		.desc = "Path to the work directory where temporary files can be "
+			"stored.\nDefault: " WORKDIR,
+	},
+	{
+		.option = { "bmvmcore", required_argument, NULL, 'B' },
+		.argument = "VMCOREFILE",
+		.desc = "Path to the target of the bind mount for the vmcore "
+			"replacement.\nDefault: " PROC_VMCORE,
+	},
+	{
+		.option = { "swap", required_argument, NULL, 'S' },
+		.argument = "PATH",
+		.desc = "Path to a swap device or file. The specified swap "
+			"device or file must exist and have the proper swap "
+			"format.\nDefault: no swap device or file is activated",
+	},
+	{
+		.option = { "hsasize", required_argument, NULL, 'T' },
+		.argument = "HSASIZE",
+		.desc = "HSA size in bytes.\n"
+			"Default: -1 (read from the zcore HSA file)",
+	},
+	{
+		.option = { "dbgfsmnt", no_argument, NULL, 'D' },
+		.desc = "Mount the debug file system.\n"
+			"Default: the debug file system is not mounted",
+	},
+	{
+		.option = { "hsamem", no_argument, NULL, 'F' },
+		.desc = "Cache the HSA memory in regular memory.\n"
+			"Default: the HSA memory is cached as a file within "
+			"WORKDIR",
+	},
+	{
+		.option = { "norelhsa", no_argument, NULL, 'R' },
+		.desc = "Do NOT release the HSA memory after caching.\n"
+			"Default: the HSA memory is released",
+	},
+	{
+		.option = { "nobindmnt", no_argument, NULL, 'N' },
+		.desc = "Do NOT replace the system's vmcore.\n"
+			"Default: the system's vmcore is replaced",
+	},
+	UTIL_OPT_SECTION("LOGGING"),
+	{
+		.option = { "verbose", no_argument, NULL, 'V' },
+		.desc = "Print verbose messages to stdout. Repeat this option "
+			"for increased verbosity from just error messages to "
+			"also include warning,  information, debug, and trace "
+			"messages. This option is intended for debugging",
+	},
+	{
+		.option = { "fusedbg", no_argument, NULL, 'G' },
+		.desc = "Enable FUSE debugging.\n"
+			"Default: FUSE debugging is disabled",
+	},
+	UTIL_OPT_SECTION("GENERAL OPTIONS"),
+	UTIL_OPT_HELP,
+	UTIL_OPT_VERSION,
+	UTIL_OPT_END
+};
+
+#endif

hyptop/hyptop.8

@@ -96,6 +96,17 @@ with an ASCII Record Separator character (0x1e) and suffixed with an ASCII Line
 Feed character (0x0a) in accordance with RFC7464.
 .BR
 
+See section "OUTPUT FORMAT" for more details.
+.BR
+.PP
+.IP \(bu 3
+.B jsonl:
+Line-delimited JSON data structures
+
+Data for each iteration is formatted as a separate JSON data structure
+separated by ASCII Line Feed character (0x0a, LF).
+.BR
+
 See section "OUTPUT FORMAT" for more details.
 .BR
 .PP
@@ -458,6 +469,14 @@ Subsequent objects each represent performance data for one iteration
 .br
 .PP
 
+.SS jsonl
+
+The jsonl output format is a data streaming variation of the JSON output format
+described above with the same properties as the json\-seq output with the
+difference that JSON data is separated only by an ASCII Line Feed character
+(0x0a, LF).
+
+
 .SH EXAMPLES
 To start hyptop with the "sys_list" window in interactive mode, enter:
 .br

hyptop/hyptop.c

@@ -233,7 +233,7 @@ static void l_fmt_init(void)
 		flags |= FMT_QUOTEALL;
 	if (g.o.format == FMT_CSV || g.o.format_all)
 		flags |= FMT_KEEPINVAL;
-	if (g.o.format == FMT_JSON || g.o.format == FMT_JSONSEQ)
+	if (util_fmt_is_json(g.o.format))
 		flags |= FMT_HANDLEINT;
 	util_fmt_init(stdout, g.o.format, flags, 1);
 }

hyptop/opts.c

@@ -54,14 +54,6 @@ static char HELP_TEXT[] =
 #define OPT_FORMAT	256 /* --format */
 #define OPT_FORMAT_ALL	261 /* --all*/
 
-/*
- * Options with underscore to keep compatibility
- */
-#define OPT_BATCH_MODE	257 /* --batch_mode */
-#define OPT_SORT_FIELD	258 /* --sort | --sort_field */
-#define OPT_CPU_TYPES	259 /* --cpu_types */
-#define OPT_SMT_FACTOR	260 /* --smt_factor */
-
 /*
  * Initialize default settings
  */
@@ -224,7 +216,7 @@ static void l_fields_set(char *str)
 }
 
 /*
- * Set the "--sort_field" option
+ * Set the "--sort" option
  */
 static void l_sort_field_set(char *str)
 {
@@ -362,19 +354,18 @@ void opts_parse(int argc, char *argv[])
 		{ "version",     no_argument,       NULL, 'v'},
 		{ "help",        no_argument,       NULL, 'h'},
 		{ "batch-mode",  no_argument,       NULL, 'b'},
-		{ "batch_mode",  no_argument,       NULL, OPT_BATCH_MODE},
+		{ "batch_mode",  no_argument,       NULL, 'b'},
 		{ "all",         no_argument,       NULL, OPT_FORMAT_ALL },
 		{ "delay",       required_argument, NULL, 'd'},
 		{ "smt-factor",  required_argument, NULL, 'm'},
-		{ "smt_factor",  required_argument, NULL, OPT_SMT_FACTOR},
+		{ "smt_factor",  required_argument, NULL, 'm'},
 		{ "window",      required_argument, NULL, 'w'},
 		{ "sys",         required_argument, NULL, 's'},
 		{ "iterations",  required_argument, NULL, 'n'},
 		{ "fields",      required_argument, NULL, 'f'},
-		{ "sort-field",  required_argument, NULL, 'S'},
+		{ "sort",        required_argument, NULL, 'S'},
-		{ "sort_field",  required_argument, NULL, OPT_SORT_FIELD},
 		{ "cpu-types",   required_argument, NULL, 't'},
-		{ "cpu_types",   required_argument, NULL, OPT_CPU_TYPES},
+		{ "cpu_types",   required_argument, NULL, 't'},
 		{ "format",      required_argument, NULL, OPT_FORMAT },
 		{ NULL,          0,                 NULL, 0  }
 	};
@@ -393,14 +384,12 @@ void opts_parse(int argc, char *argv[])
 		case 'h':
 			l_usage();
 			hyptop_exit(0);
-		case OPT_BATCH_MODE:
 		case 'b':
 			l_batch_mode_set();
 			break;
 		case 'd':
 			l_delay_set(optarg);
 			break;
-		case OPT_SMT_FACTOR:
 		case 'm':
 			l_factor_set(optarg);
 			break;
@@ -413,14 +402,12 @@ void opts_parse(int argc, char *argv[])
 		case 'n':
 			l_iterations_set(optarg);
 			break;
-		case OPT_CPU_TYPES:
 		case 't':
 			l_cpu_types_set(optarg);
 			break;
 		case 'f':
 			l_fields_set(optarg);
 			break;
-		case OPT_SORT_FIELD:
 		case 'S':
 			l_sort_field_set(optarg);
 			break;

hyptop/table.c

@@ -1037,7 +1037,7 @@ void table_fmt_start(void)
 {
 	if (!g.o.format_specified)
 		return;
-	if (g.o.format != FMT_JSONSEQ)
+	if (!util_fmt_is_json_stream(g.o.format))
 		util_fmt_obj_start(FMT_LIST, "hyptop");
 }
 
@@ -1045,7 +1045,7 @@ void table_fmt_end(void)
 {
 	if (!g.o.format_specified)
 		return;
-	if (g.o.format != FMT_JSONSEQ)
+	if (!util_fmt_is_json_stream(g.o.format))
 		util_fmt_obj_end(); /* hyptop[] */
 }
 

include/lib/util_autocomp.h

@@ -1,15 +1,7 @@
-/* SPDX-License-Identifier: MIT */
 /*
- * autocomp - command line autocompletion
+ * SPDX-License-Identifier: MIT
- *
- * Generating autocompletion scripts for bash and zsh
- * based on util_opt struct
- *
- * Copyright IBM Corp. 2025
- *
- * s390-tools is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See LICENSE for details.
  *
+ * Copyright IBM Corp.
  */
 
 #ifndef LIB_UTIL_AUTOCOMP_H

include/lib/util_fmt.h

@@ -45,12 +45,13 @@
 #define FMT_DEFAULT	0
 
 /* Names of supported output format types. */
-#define FMT_TYPE_NAMES	"json json-seq pairs csv"
+#define FMT_TYPE_NAMES	"json json-seq jsonl pairs csv"
 
 /**
  * enum util_fmt_t - Output format types.
  * @FMT_JSON:    JavaScript Object Notation output data structure
  * @FMT_JSONSEQ: Sequence of JSON data structures according to RFC7464
+ * @FMT_JSONL:   Line-delimited JSON
  * @FMT_PAIRS:   Textual key=value pairs
  * @FMT_CSV:     Comma-separated-values output
  *
@@ -59,6 +60,7 @@
 enum util_fmt_t {
 	FMT_JSON,
 	FMT_JSONSEQ,
+	FMT_JSONL,
 	FMT_PAIRS,
 	FMT_CSV,
 };
@@ -232,4 +234,23 @@ void util_fmt_obj_end(void);
  */
 void util_fmt_pair(unsigned int mflags, const char *key, const char *fmt, ...);
 
+/**
+ * util_fmt_is_json() - Determine whether format is JSON.
+ * @type: Format type identifier.
+ *
+ * Return: %true if type is JSON, %false otherwise.
+ */
+bool util_fmt_is_json(enum util_fmt_t type);
+
+/**
+ * util_fmt_is_json_stream() - Determine whether format is JSON stream.
+ * @type: Format type identifier.
+ *
+ * Determine whether a given format @type represents a JSON streaming format
+ * such as json-seq (@FMT_JSONSEQ) or jsonl (@FMT_JSONL).
+ *
+ * Return: %true if type is either @FMT_JSONSEQ or @FMT_JSONL, %false otherwise.
+ */
+bool util_fmt_is_json_stream(enum util_fmt_t type);
+
 #endif /* LIB_UTIL_FMT_H */

libekmfweb/utilities.c

@@ -2172,7 +2172,7 @@ int write_public_key(const char *pem_filename, EVP_PKEY *pkey)
  */
 static bool is_duplicate_name_entry(X509_NAME *name, X509_NAME_ENTRY *entry)
 {
-	X509_NAME_ENTRY *ne;
+	const X509_NAME_ENTRY *ne;
 	int count, i;
 
 	count = X509_NAME_entry_count(name);

libkmipclient/tls.c

@@ -378,8 +378,14 @@ int kmip_connection_tls_init(struct kmip_connection *conn, bool debug)
 	if (conn->config.tls_verify_host) {
 		SSL_set_hostflags(conn->plain_tls.ssl,
 				  X509_CHECK_FLAG_NO_PARTIAL_WILDCARDS);
+#if OPENSSL_VERSION_PREREQ(4, 0)
+		if (SSL_set1_ipaddr(conn->plain_tls.ssl, hostname) != 1 &&
+		    SSL_set1_dnsname(conn->plain_tls.ssl, hostname) != 1) {
+			kmip_debug(debug, "SSL_set1_ipaddr/dnsname failed");
+#else
 		if (SSL_set1_host(conn->plain_tls.ssl, hostname) != 1) {
 			kmip_debug(debug, "SSL_set1_host failed");
+#endif
 			if (debug)
 				ERR_print_errors_fp(stderr);
 			rc = -EIO;

libseckey/sk_utilities.c

@@ -395,7 +395,7 @@ const struct sk_digest_info *SK_UTIL_get_digest_info(int digest_nid)
 static bool SK_UTILS_is_duplicate_name_entry(const X509_NAME *name,
 					     const X509_NAME_ENTRY *entry)
 {
-	X509_NAME_ENTRY *ne;
+	const X509_NAME_ENTRY *ne;
 	int count, i;
 
 	count = X509_NAME_entry_count(name);

libutil/util_autocomp_host.c

@@ -1,15 +1,7 @@
-// SPDX-License-Identifier: MIT
 /*
- * autocomp - command line autocompletion
+ * SPDX-License-Identifier: MIT
- *
- * Generating autocompletion scripts for bash and zsh
- * based on util_opt struct
- *
- * Copyright IBM Corp. 2025
- *
- * s390-tools is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See LICENSE for details.
  *
+ * Copyright IBM Corp.
  */
 
 #include <errno.h>
@@ -22,18 +14,19 @@
 #include "lib/util_autocomp.h"
 #include "lib/util_opt.h"
 
-static const char *bash_script_part1 = "() {\n\n\
+static const char *bash_script_part1 = "() {\n\
-\tlocal current_word previous_word options_array\n\n\
+\tlocal current_word options_array\n\
 \tCOMPREPLY=()\n\n\
-\tcurrent_word=\"${COMP_WORDS[COMP_CWORD]}\"\n\n\
+\tcurrent_word=\"${COMP_WORDS[COMP_CWORD]}\"\n\
-\tprevious_word=\"${COMP_WORDS[COMP_CWORD-1]}\"\n\n\
 \toptions_array=\"";
 
-static const char *bash_script_part2 = "\tif [[ ${current_word} == -* || ${COMP_CWORD} -eq 1 ]] ; then\n\n\
+static const char *bash_script_part2 = "\tif [[ ${current_word} == -* ]] ; then\n\
-\t\tCOMPREPLY=( $(compgen -W \"${options_array}\" -- ${current_word} ) )\n\n\
+\t\tmapfile -t \"COMPREPLY\" < <(compgen -W \"${options_array}\" -- \"$current_word\")\n\
-\t\treturn 0\n\n\
+\telse\n\
-\tfi\n\n\
+\t\tcompopt -o bashdefault -o default\n\
-}\n\n\
+\tfi\n\
+\treturn 0\n\
+}\n\
 complete -F ";
 
 static char *format_name(const char *fmt, char *tool_name)
@@ -63,7 +56,7 @@ static int init_scriptfile(char *file_path)
 {
 	int fd;
 
-	fd = open(file_path, O_CREAT | O_WRONLY, 0644);
+	fd = open(file_path, O_CREAT | O_WRONLY | O_TRUNC, 0644);
 	if (fd < 0)
 		return -EIO;
 	return fd;
@@ -86,7 +79,7 @@ static int start_bash_scriptfile(int fd, char *func_name)
 
 static int start_zsh_scriptfile(int fd, char *func_name, char *tool_name)
 {
-	const char *part3 = " {\n\n\t_arguments -C \\\n";
+	const char *part3 = " {\n\n\t_arguments -C -A \"*\" \\\n";
 	const char *part2 = "\n\nfunction ";
 	const char *part1 = "#compdef ";
 	int len, ret = 0;
@@ -127,6 +120,7 @@ static int write_bash_command_options(struct util_opt *opt_vec, int fd)
 
 static int write_zsh_command_options(struct util_opt *opt_vec, int fd)
 {
+	const char *end = "\t\t\"*:files:_files\"\n}\n";
 	const char *name, *desc;
 	char *str;
 	int len;
@@ -145,8 +139,14 @@ static int write_zsh_command_options(struct util_opt *opt_vec, int fd)
 			free(str);
 		}
 	}
-	if (write(fd, "\n}\n", 3) != 3)
+	len = asprintf(&str, "%s", end);
+	if (len == -1)
 		return -EIO;
+	if (write(fd, str, len) != len) {
+		free(str);
+		return -EIO;
+	}
+	free(str);
 	return 0;
 }
 
@@ -169,35 +169,6 @@ static int finish_bash_scriptfile(char *tool_name, int fd, char *func_name)
  * Adds tab completion in bash for a command.
  * Works by generating an autocompletion
  * script file  at '/usr/share/bash-completion/completions'.
- *
- * The full script will be as follows, supposing the tool name is
- * 'example' and it only has the options '--help' and
- * '--version':
- *
- * _example() {
- *
- *      local current_word previous_word options_array
- *
- *      COMPREPLY=()
- *
- *      current_word="${COMP_WORDS[COMP_CWORD]}"
- *
- *      previous_word="${COMP_WORDS[COMP_CWORD-1]}"
- *
- *      options_array="--version --help"
- *
- *      if [[ ${current_word} == -* || ${COMP_CWORD} -eq 1 ]] ; then
- *
- *              COMPREPLY=( $(compgen -W "${options_array}" -- ${current_word} ) )
- *
- *              return 0
- *
- *      fi
- *
- *	}
- *
- *	complete -F _example example
- *
  */
 static void generate_bash_autocomp(struct util_opt *opt_vec, char *tool_name)
 {
@@ -244,22 +215,6 @@ end:
  * Adds tab completion in zsh for a command.
  * Works by generating an autocompletion
  * script file  at '/usr/share/zsh/site-functions'.
- *
- * The full script will be as follows, supposing the tool name is
- * 'example' and it only has the options '--help', -h and
- * '--version' (the descriptions, as well as the flags are
- * taken from a util_opt struct):
- *
- * #compdef example_completion
- *
- * function _example_completion {
- *
- *	_arguments -C \
- *		"-h[Show help information]" \
- *		"--help[Show help but long format]" \
- *		"--version[Show version]"
- * }
- *
  */
 static void generate_zsh_autocomp(struct util_opt *opt_vec, char *tool_name)
 {

libutil/util_fmt.c

@@ -91,6 +91,7 @@ static const struct {
 } formats[] = {
 	{ "json", FMT_JSON },
 	{ "json-seq", FMT_JSONSEQ },
+	{ "jsonl", FMT_JSONL },
 	{ "pairs", FMT_PAIRS },
 	{ "csv",  FMT_CSV },
 };
@@ -111,6 +112,29 @@ bool util_fmt_name_to_type(const char *name, enum util_fmt_t *type)
 	return false;
 }
 
+bool util_fmt_is_json(enum util_fmt_t type)
+{
+	switch (type) {
+	case FMT_JSON:
+	case FMT_JSONSEQ:
+	case FMT_JSONL:
+		return true;
+	default:
+		return false;
+	}
+}
+
+bool util_fmt_is_json_stream(enum util_fmt_t type)
+{
+	switch (type) {
+	case FMT_JSONSEQ:
+	case FMT_JSONL:
+		return true;
+	default:
+		return false;
+	}
+}
+
 static void safe_write(const char *str)
 {
 	size_t done, todo;
@@ -129,7 +153,7 @@ static void _indent(unsigned int off, bool safe)
 {
 	unsigned int num, i;
 
-	if (f.type == FMT_JSONSEQ)
+	if (util_fmt_is_json_stream(f.type))
 		return;
 	num = f.ind_base + off;
 	if (f.type == FMT_JSON && f.lvl > 0)
@@ -408,8 +432,8 @@ static void emit_meta_object(void)
 	util_fmt_pair(quoted, "time", "%s", date);
 	_util_fmt_obj_end();
 
-	if (f.type == FMT_JSONSEQ) {
+	if (util_fmt_is_json_stream(f.type)) {
-		/* Tool meta-data is a separate object for JSONSEQ. */
+		/* Tool meta-data is a separate object for JSON streams. */
 		util_fmt_obj_end();
 	}
 }
@@ -478,7 +502,7 @@ void util_fmt_obj_end(void)
 {
 	_util_fmt_obj_end();
 
-	if (f.lvl == 1 && f.meta_done && f.type != FMT_JSONSEQ) {
+	if (f.lvl == 1 && f.meta_done && !util_fmt_is_json_stream(f.type)) {
 		/* Emit closure for top-level meta-container object. */
 		util_fmt_obj_end();
 	}
@@ -737,7 +761,7 @@ void util_fmt_init(FILE *fd, enum util_fmt_t type, unsigned int flags,
 	f.do_warn     = (flags & FMT_WARN);
 	f.handle_int  = (flags & FMT_HANDLEINT);
 	f.api_level   = api_level;
-	if (type == FMT_JSONSEQ)
+	if (util_fmt_is_json_stream(type))
 		f.nl = "";
 	else
 		f.nl = "\n";
@@ -750,6 +774,7 @@ void util_fmt_init(FILE *fd, enum util_fmt_t type, unsigned int flags,
 		break;
 	case FMT_JSON:
 	case FMT_JSONSEQ:
+	case FMT_JSONL:
 		f.obj_start = &json_obj_start;
 		f.obj_end   = &json_obj_end;
 		f.map       = &json_map;

libutil/util_fmt_example.c

@@ -193,6 +193,9 @@ int main(int UNUSED(argc), char *UNUSED(argv[]))
 	announce("JSON formatted as sequence");
 	simple_example(FMT_JSONSEQ, FMT_DEFAULT);
 
+	announce("JSON Lines format");
+	simple_example(FMT_JSONL, FMT_DEFAULT);
+
 	announce("Pairs output");
 	simple_example(FMT_PAIRS, FMT_KEEPINVAL);
 
@@ -232,6 +235,9 @@ int main(int UNUSED(argc), char *UNUSED(argv[]))
 	announce("JSON sequence output with meta-data");
 	meta_example(FMT_JSONSEQ);
 
+	announce("JSON Lines output with meta-data");
+	meta_example(FMT_JSONL);
+
 	announce("Pairs output with meta-data");
 	meta_example(FMT_PAIRS);
 

lsstp/Makefile

@@ -1,5 +1,10 @@
 include ../common.mak
 
+zsh-completions = _lsstp
+bash-completions = lsstp.bash
+
+include ../common_autocomp.mak
+
 libs = $(rootdir)/libutil/libutil.a
 all: lsstp
 

lsstp/autocompletion_generator_host.c

@@ -0,0 +1,16 @@
+/*
+ * SPDX-License-Identifier: MIT
+ *
+ * Copyright IBM Corp.
+ */
+
+#include "lib/util_autocomp.h"
+
+#include "lsstp_cli.h"
+
+int main(void)
+{
+	generate_autocomp(opt_vec, "lsstp");
+
+	return 0;
+}

lsstp/lsstp.c

@@ -22,6 +22,8 @@
 #include "lib/util_prg.h"
 #include "lib/util_path.h"
 
+#include "lsstp_cli.h"
+
 static const struct util_prg prg = {
 	.desc = "Display STP system information",
 	.args = "",
@@ -34,12 +36,6 @@ static const struct util_prg prg = {
 	}
 };
 
-static struct util_opt opt_vec[] = {
-	UTIL_OPT_HELP,
-	UTIL_OPT_VERSION,
-	UTIL_OPT_END
-};
-
 struct stp_parms {
 	uint64_t ctn_id;
 	unsigned int online;

lsstp/lsstp_cli.h

@@ -0,0 +1,18 @@
+/*
+ * SPDX-License-Identifier: MIT
+ *
+ * Copyright IBM Corp.
+ */
+
+#ifndef LSSTP_CLI_H
+#define LSSTP_CLI_H
+
+#include "lib/util_opt.h"
+
+static struct util_opt opt_vec[] = {
+	UTIL_OPT_HELP,
+	UTIL_OPT_VERSION,
+	UTIL_OPT_END
+};
+
+#endif

opticsmon/Makefile

@@ -2,6 +2,11 @@ include ../common.mak
 
 TESTS := tests/
 
+zsh-completions = _opticsmon
+bash-completions = opticsmon.bash
+
+include ../common_autocomp.mak
+
 libs =$(rootdir)/libzpci/libzpci.a $(rootdir)/libutil/libutil.a
 
 ifneq (${HAVE_OPENSSL},0)

opticsmon/autocompletion_generator_host.c

@@ -0,0 +1,16 @@
+/*
+ * SPDX-License-Identifier: MIT
+ *
+ * Copyright IBM Corp.
+ */
+
+#include "lib/util_autocomp.h"
+
+#include "opticsmon_cli.h"
+
+int main(void)
+{
+	generate_autocomp(opt_vec, "opticsmon");
+
+	return 0;
+}

opticsmon/opticsmon.8

@@ -45,7 +45,7 @@ opticsmon - Monitor optical modules for directly attached PCI based NICs
 Use
 .B opticsmon
 to monitor the health of the optical modules of directly attached PCI based
-NICs. When executed without the \fB--daemon\fR option it will collect optical
+NICs. When executed without the \fB--monitor\fR option it will collect optical
 module data from all available PCI network interface physical functions and
 print a summary in JSON format. Add the \fB--send-report\fR option to report
 this data to the support element.
@@ -55,7 +55,7 @@ this data to the support element.
 .
 .SH OPTIONS
 .SS Operation Options
-.OD daemon "d"
+.OD monitor "m"
 Run continuously and report on link state changes and periodically
 .PP
 .

opticsmon/opticsmon.c

@@ -27,10 +27,11 @@
 
 #include <openssl/evp.h>
 
-#include "optics_info.h"
-#include "optics_sclp.h"
 #include "ethtool.h"
 #include "link_mon.h"
+#include "optics_info.h"
+#include "optics_sclp.h"
+#include "opticsmon_cli.h"
 
 #define API_LEVEL 1
 
@@ -61,44 +62,6 @@ static const struct util_prg prg = {
 			   UTIL_PRG_COPYRIGHT_END }
 };
 
-#define OPT_DUMP 128
-
-static struct util_opt opt_vec[] = {
-	UTIL_OPT_SECTION("OPERATION OPTIONS"),
-	{
-		.option = { "monitor", no_argument, NULL, 'm' },
-		.desc = "Run continuously and report on link state changes "
-			"collecting optics health data when a change is detected",
-	},
-	{
-		.option = { "send-report", no_argument, NULL, 'r' },
-		.desc = "Report the optics health data to the Support Element",
-	},
-	{
-		.option = { "quiet", no_argument, NULL, 'q' },
-		.desc = "Be quiet and don't print optics health summary",
-	},
-	{
-		.option = { "module-info", no_argument, NULL, OPT_DUMP },
-		.desc = "Include a base64 encoded binary dump of the module's "
-			"SFF-8636/8472/8024 standard data for each netdev. "
-			"This matches \"ethtool --module-info <netdev> raw on\"",
-		.flags = UTIL_OPT_FLAG_NOSHORT,
-	},
-	UTIL_OPT_SECTION("OPTIONS WITH ARGUMENTS"),
-	{
-		.option = { "interval", required_argument, NULL, 'i' },
-		.argument = "seconds",
-		.desc = "Interval in seconds at which to collect monitoring data "
-			"in the absence of link state changes. A value larger than "
-			"24 hours (86400 seconds) is clamped down to 24 hours.",
-	},
-	UTIL_OPT_SECTION("GENERAL OPTIONS"),
-	UTIL_OPT_HELP,
-	UTIL_OPT_VERSION,
-	UTIL_OPT_END
-};
-
 static void parse_cmdline(int argc, char *argv[], struct options *opts)
 {
 	uint32_t seconds;

opticsmon/opticsmon_cli.h

@@ -0,0 +1,50 @@
+/*
+ * SPDX-License-Identifier: MIT
+ *
+ * Copyright IBM Corp.
+ */
+
+#ifndef OPTICSMON_CLI_H
+#define OPTICSMON_CLI_H
+
+#include "lib/util_opt.h"
+
+#define OPT_DUMP 128
+
+static struct util_opt opt_vec[] = {
+	UTIL_OPT_SECTION("OPERATION OPTIONS"),
+	{
+		.option = { "monitor", no_argument, NULL, 'm' },
+		.desc = "Run continuously and report on link state changes "
+			"collecting optics health data when a change is detected",
+	},
+	{
+		.option = { "send-report", no_argument, NULL, 'r' },
+		.desc = "Report the optics health data to the Support Element",
+	},
+	{
+		.option = { "quiet", no_argument, NULL, 'q' },
+		.desc = "Be quiet and don't print optics health summary",
+	},
+	{
+		.option = { "module-info", no_argument, NULL, OPT_DUMP },
+		.desc = "Include a base64 encoded binary dump of the module's "
+			"SFF-8636/8472/8024 standard data for each netdev. "
+			"This matches 'ethtool --module-info <netdev> raw on'",
+		.flags = UTIL_OPT_FLAG_NOSHORT,
+	},
+	UTIL_OPT_SECTION("OPTIONS WITH ARGUMENTS"),
+	{
+		.option = { "interval", required_argument, NULL, 'i' },
+		.argument = "seconds",
+		.desc = "Interval in seconds at which to collect monitoring data "
+			"in the absence of link state changes. A value larger than "
+			"24 hours (86400 seconds) is clamped down to 24 hours.",
+	},
+	UTIL_OPT_SECTION("GENERAL OPTIONS"),
+	UTIL_OPT_HELP,
+	UTIL_OPT_VERSION,
+	UTIL_OPT_END
+};
+
+#endif

rust/Cargo.lock

@@ -62,9 +62,9 @@ dependencies = [
 
 [[package]]
 name = "anyhow"
-version = "1.0.95"
+version = "1.0.100"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "34ac096ce696dc2fcabef30516bb13c0a68a11d30131d3df6f04711467681b04"
+checksum = "a23eb6b1614318a8071c9b2521f36b424b2c83db5eb3a0fead4a6c0809af6e61"
 
 [[package]]
 name = "autocfg"
@@ -111,6 +111,15 @@ dependencies = [
  "wyz",
 ]
 
+[[package]]
+name = "block-buffer"
+version = "0.10.4"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "3078c7629b62d3f0439517fa394996acacc5cbc91c5a20d8c658e77abd503a71"
+dependencies = [
+ "generic-array",
+]
+
 [[package]]
 name = "byteorder"
 version = "1.5.0"
@@ -212,6 +221,25 @@ dependencies = [
  "zerocopy",
 ]
 
+[[package]]
+name = "cpufeatures"
+version = "0.2.17"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "59ed5838eebb26a2bb2e58f6d5b5316989ae9d08bab10e0e6d103e656d1b0280"
+dependencies = [
+ "libc",
+]
+
+[[package]]
+name = "crypto-common"
+version = "0.1.6"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "1bfb12502f3fc46cca1bb51ac28df9d618d813cdc3d2f25b9fe775a34af26bb3"
+dependencies = [
+ "generic-array",
+ "typenum",
+]
+
 [[package]]
 name = "curl"
 version = "0.4.49"
@@ -302,6 +330,16 @@ dependencies = [
  "syn",
 ]
 
+[[package]]
+name = "digest"
+version = "0.10.7"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "9ed9a281f7bc9b7576e61468ba615a66a5c8cfdff42420a70aa82701a3b1e292"
+dependencies = [
+ "block-buffer",
+ "crypto-common",
+]
+
 [[package]]
 name = "enum_dispatch"
 version = "0.3.13"
@@ -363,6 +401,16 @@ version = "2.0.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "e6d5a32815ae3f33302d95fdcb2ce17862f8c65363dcfd29360480ba1001fc9c"
 
+[[package]]
+name = "generic-array"
+version = "0.14.7"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "85649ca51fd72272d7821adaf274ad91c288277713d9c18820d8499a7ff69e9a"
+dependencies = [
+ "typenum",
+ "version_check",
+]
+
 [[package]]
 name = "getrandom"
 version = "0.2.16"
@@ -404,6 +452,12 @@ version = "0.5.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "2304e00983f87ffb38b55b444b5e3b60a884b5d30c0fca7d82fe33449bbe55ea"
 
+[[package]]
+name = "hex"
+version = "0.4.3"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "7f24254aa9a54b5c858eaee2f5bccdb46aaf0e486a595ed5fd8f86ba55232a70"
+
 [[package]]
 name = "ident_case"
 version = "1.0.1"
@@ -641,6 +695,20 @@ dependencies = [
  "zerocopy",
 ]
 
+[[package]]
+name = "pvebc"
+version = "0.12.0"
+dependencies = [
+ "anyhow",
+ "clap",
+ "clap_complete",
+ "hex",
+ "s390_pv_core",
+ "sha2",
+ "utils",
+ "zerocopy",
+]
+
 [[package]]
 name = "pvimg"
 version = "0.12.0"
@@ -687,6 +755,7 @@ dependencies = [
  "s390_pv",
  "serde_yaml",
  "utils",
+ "zerocopy",
 ]
 
 [[package]]
@@ -891,6 +960,7 @@ dependencies = [
  "regex",
  "serde",
  "serde_test",
+ "sha2",
  "thiserror",
  "zerocopy",
 ]
@@ -969,6 +1039,17 @@ dependencies = [
  "unsafe-libyaml",
 ]
 
+[[package]]
+name = "sha2"
+version = "0.10.9"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "a7507d819769d01a365ab707794a4084392c824f54a7a6a7862f8c3d0892b283"
+dependencies = [
+ "cfg-if",
+ "cpufeatures",
+ "digest",
+]
+
 [[package]]
 name = "shlex"
 version = "1.3.0"
@@ -1069,6 +1150,12 @@ dependencies = [
  "winnow",
 ]
 
+[[package]]
+name = "typenum"
+version = "1.18.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "1dccffe3ce07af9386bfd29e80c0ab1a8205a2fc34e4bcd40364df902cfa8f3f"
+
 [[package]]
 name = "unarray"
 version = "0.1.4"
@@ -1112,6 +1199,12 @@ version = "0.2.15"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "accd4ea62f7bb7a82fe23066fb0957d48ef677f6eeb8215f372f52e48bb32426"
 
+[[package]]
+name = "version_check"
+version = "0.9.5"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "0b928f33d975fc6ad9f86c8f283853ad26bdd5b10b7f1542aa2fa15e2289105a"
+
 [[package]]
 name = "wait-timeout"
 version = "0.2.0"
@@ -1238,18 +1331,18 @@ dependencies = [
 
 [[package]]
 name = "zerocopy"
-version = "0.8.25"
+version = "0.8.27"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "a1702d9583232ddb9174e01bb7c15a2ab8fb1bc6f227aa1233858c351a3ba0cb"
+checksum = "0894878a5fa3edfd6da3f88c4805f4c8558e2b996227a3d864f47fe11e38282c"
 dependencies = [
  "zerocopy-derive",
 ]
 
 [[package]]
 name = "zerocopy-derive"
-version = "0.8.25"
+version = "0.8.27"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "28a6e20d751156648aa063f3800b706ee209a32c0b4d9f24be3d980b01be55ef"
+checksum = "88d2b8d9c68ad2b9e4340d7832716a4d21a22a1154777ad56ea55c51a9cf3831"
 dependencies = [
  "proc-macro2",
  "quote",

rust/Cargo.toml

@@ -5,6 +5,7 @@ members = [
 	"pv_core",
 	"pvapconfig",
 	"pvattest",
+	"pvebc",
 	"pvimg",
 	"pvinfo",
 	"pvsecret",

rust/Makefile

@@ -10,8 +10,10 @@ CARGO_TARGETS :=
 PV_TARGETS :=
 CARGO_TEST_TARGETS :=
 
+SEL_EBC_MODDIR := 95sel-ebc
+
 ifneq (${HAVE_CARGO},0)
-	CARGO_TARGETS :=
+	CARGO_TARGETS := pvebc
 
 	BUILD_TARGETS = $(CARGO_TARGETS)
 	INSTALL_TARGETS := install-rust-tools install-man install-shell-completions
@@ -29,6 +31,7 @@ ifneq (${HAVE_LIBCURL},0)
 
 ifeq ($(HOST_ARCH),s390x)
 	PV_TARGETS += pvapconfig pvinfo
+	INSTALL_TARGETS += install-ebc-dracut-module
 else
 	BUILD_TARGETS += skip-pvapconfig skip-pvinfo
 endif #HOSTARCH
@@ -104,6 +107,23 @@ endif # CARGO
 
 rust-test: $(CARGO_TEST_TARGETS)
 
+install-ebc-dracut-module:
+ifneq ($(HAVE_DRACUT),0)
+	$(INSTALL) -m 755 -d $(DESTDIR)$(DRACUTMODDIR)/
+	$(INSTALL) -m 755 -d $(DESTDIR)$(DRACUTMODDIR)/$(SEL_EBC_MODDIR)
+	$(INSTALL) -m 755 pvebc/$(SEL_EBC_MODDIR)/module-setup.sh \
+		pvebc/$(SEL_EBC_MODDIR)/override-crypttab.sh \
+		pvebc/$(SEL_EBC_MODDIR)/pvebc-wrapper.sh \
+		$(DESTDIR)$(DRACUTMODDIR)/$(SEL_EBC_MODDIR)
+	$(INSTALL) -m 644 pvebc/$(SEL_EBC_MODDIR)/boot.mount \
+		pvebc/$(SEL_EBC_MODDIR)/sel-ebc-override-crypttab.service \
+		pvebc/$(SEL_EBC_MODDIR)/sel-ebc-paes-enforce.service \
+		pvebc/$(SEL_EBC_MODDIR)/sel-ebc-pvebc.service \
+		pvebc/$(SEL_EBC_MODDIR)/sel-ebc.crypttab \
+		pvebc/$(SEL_EBC_MODDIR)/sel-ebc.target \
+		$(DESTDIR)$(DRACUTMODDIR)/$(SEL_EBC_MODDIR)
+endif
+
 install-rust-tools: $(BUILD_TARGETS)
 	$(INSTALL) -d -m 755 $(DESTDIR)$(USRBINDIR)
 	$(foreach target,$(CARGO_TARGETS),\

rust/pv/src/lib.rs

@@ -104,7 +104,14 @@ pub mod request {
 
     /// Reexports some useful OpenSSL symbols
     pub mod openssl {
-        pub use openssl::{error::ErrorStack, hash::DigestBytes, nid::Nid, pkey, x509};
+        pub use openssl::{
+            error::ErrorStack,
+            hash::DigestBytes,
+            nid::Nid,
+            pkey,
+            sha::{Sha256, Sha512},
+            x509,
+        };
         // rust-OpenSSL does not define these NIDs
         #[allow(missing_docs)]
         pub const NID_ED25519: Nid = Nid::from_raw(openssl_sys::NID_ED25519);
@@ -113,6 +120,8 @@ pub mod request {
     }
 
     pub use pv_core::request::*;
+
+    pub use pv_core::PolicyReference;
 }
 
 /// Functionalities for creating add-secret requests

rust/pv/src/uvsecret/user_data.rs

@@ -248,7 +248,7 @@ fn check_key_format(kind: UserDataType, key: &PKeyRef<Public>) -> Result<()> {
 ///
 /// # Returns
 ///
-/// Extracrted user-data if available
+/// Extracted user-data if available
 ///
 /// # Errors
 ///

rust/pv_core/Cargo.toml

@@ -23,6 +23,7 @@ zerocopy = {version = "0.8", features = ["derive"]}
 serde = { version = "1.0.217", features = ["derive"]}
 byteorder = "1.5"
 regex = "1.10"
+sha2 = "0.10.9"
 
 [dev-dependencies]
 serde_test = "1.0.177"

rust/pv_core/src/lib.rs

@@ -6,6 +6,7 @@ mod apdevice;
 mod confidential;
 mod error;
 mod macros;
+mod policy;
 mod utils;
 mod uvattest;
 mod uvdevice;
@@ -13,6 +14,13 @@ mod uvsecret;
 
 pub use error::{Error, FileAccessErrorType, FileIoErrorType, Result};
 
+/// Early Boot Customization (EBC) utilities.
+///
+/// This module provides types and functions for working with Early Boot
+/// Customization. The integrity and completeness of ASRs are ensured through
+/// cryptographically protected table of contents files.
+pub use policy::PolicyReference;
+
 /// Functionalities for reading attestation requests
 pub mod attest {
     pub use crate::uvattest::{AttestationMagic, AttestationMeasAlg};

rust/pv_core/src/policy.rs

@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: MIT
+//
+// Copyright IBM Corp.
+
+use crate::misc::encode_hex;
+use crate::utils::open_file;
+use crate::{Error, Result};
+use std::{
+    fmt::{Display, Formatter, Result as Resfmt},
+    fs::File,
+    os::unix::ffi::OsStrExt,
+    path::{Path, PathBuf},
+    str::from_utf8,
+};
+use zerocopy::{FromBytes, Immutable, IntoBytes};
+
+const HASH_LEN: usize = 32;
+// UserDataType::Unsigned.max() returns 512
+const USER_DATA_MAX_SIZE: usize = 512;
+
+/// A reference to a policy file containing its SHA-256 hash and file path.
+///
+/// This structure is used in Early Boot Customization (EBC) to store
+/// a reference to a policy file. It contains the SHA-256 hash of the policy
+/// file content and the file path as a fixed-size byte array.
+///
+/// The total size is constrained by `USER_DATA_MAX_SIZE` (512 bytes), with
+/// 32 bytes allocated for the hash and the remaining bytes for the file path.
+#[derive(Debug, FromBytes, IntoBytes, Immutable, Copy, Clone)]
+#[repr(C)]
+pub struct PolicyReference {
+    /// SHA-256 hash of the policy file content (32 bytes)
+    pub hash: [u8; HASH_LEN],
+    /// File path stored as a null-terminated byte array
+    pub name: [u8; USER_DATA_MAX_SIZE - HASH_LEN],
+}
+
+impl PolicyReference {
+    /// Creates a new `PolicyReference` from a file path.
+    ///
+    /// Opens the file, reads its content, and computes the SHA-256 hash.
+    ///
+    /// # Parameters
+    ///
+    /// * `src` - The path to the policy file
+    /// * `sha256` - A function that computes the SHA-256 hash of the content
+    ///
+    /// # Returns
+    ///
+    /// Returns a `PolicyReference` containing the SHA-256 hash and the file path,
+    /// or an error if the file cannot be opened or the hash computation fails.
+    ///
+    /// # Note
+    ///
+    /// The file path is truncated if it exceeds the available space in the `name` field.
+    pub fn new<P, H>(src: P, sha256: H) -> Result<Self>
+    where
+        P: AsRef<Path>,
+        H: Fn(File) -> Result<Vec<u8>>,
+    {
+        let mut ret = Self {
+            hash: [0; HASH_LEN],
+            name: [0; USER_DATA_MAX_SIZE - HASH_LEN],
+        };
+
+        let file = open_file(src.as_ref())?;
+        ret.hash.copy_from_slice(sha256(file)?.as_bytes());
+        let strbytes = src.as_ref().as_os_str().as_bytes();
+        let nbytes = strbytes.len().min(ret.name.len());
+        ret.name[..nbytes].copy_from_slice(&strbytes[..nbytes]);
+
+        Ok(ret)
+    }
+
+    /// Converts the stored file path back to a `PathBuf`.
+    ///
+    /// # Returns
+    ///
+    /// Returns the file path as a `PathBuf`, or an error if the stored name
+    /// is not valid UTF-8.
+    ///
+    /// # Errors
+    ///
+    /// * `Error::ParseError` - If the name contains invalid UTF-8
+    pub fn to_path(&self) -> Result<PathBuf> {
+        // Extract bytes until the first null byte (null-terminated string)
+        let name_bytes: Vec<u8> = self
+            .name
+            .iter()
+            .copied()
+            .take_while(|&byte| byte != 0)
+            .collect();
+
+        let rust_string = String::from_utf8(name_bytes).map_err(|e| Error::ParseError {
+            subject: "PolicyReference name".to_string(),
+            content: format!("Invalid UTF-8 in name: {}", e),
+        })?;
+
+        Ok(Path::new(&rust_string).to_owned())
+    }
+}
+
+impl Display for PolicyReference {
+    fn fmt(&self, f: &mut Formatter) -> Resfmt {
+        write!(
+            f,
+            "{} {}",
+            encode_hex(self.hash),
+            from_utf8(&self.name).expect("unable to convert name")
+        )
+    }
+}

rust/pvattest/src/cli.rs

@@ -35,12 +35,12 @@ pub enum Command {
     /// shred it after verification. Every 'create' will generate a new, random protection key.
     Create(Box<CreateAttOpt>),
 
-    /// Send the attestation request to the Ultravisor.
+    /// Send the attestation request to the Ultravisor (s390x only.)
     ///
     /// Run a measurement of this system through ’/dev/uv’. This device must be accessible and the
     /// attestation Ultravisor facility must be present. The input must be an attestation request
     /// created with ’pvattest create’. Output will contain the original request and the response
-    /// from the Ultravisor.
+    /// from the Ultravisor. Only available on s390x.
     Perform(PerformAttOpt),
 
     /// Verify an attestation response.
@@ -110,27 +110,22 @@ pub enum AttAddFlags {
     FirmwareState,
 }
 
-// all members s390x only
 #[derive(Args, Debug)]
 pub struct PerformAttOpt {
     /// Specify the request to be sent.
-    #[cfg(target_arch = "s390x")]
     #[arg(hide=true, short, long, value_name = "FILE", value_hint = ValueHint::FilePath,)]
     pub input: Option<String>,
 
     /// Specify the request to be sent.
-    #[cfg(target_arch = "s390x")]
     #[arg(value_name = "IN", value_hint = ValueHint::FilePath, required_unless_present("input"), conflicts_with("input"))]
     pub input_pos: Option<String>,
 
     /// Write the result to FILE.
-    #[cfg(target_arch = "s390x")]
     #[arg(hide=true, short, long, value_name = "FILE", value_hint = ValueHint::FilePath,)]
     pub output: Option<String>,
 
     /// Write the result to FILE.
     #[arg(value_name = "OUT", value_hint = ValueHint::FilePath, required_unless_present("output"), conflicts_with("output"))]
-    #[cfg(target_arch = "s390x")]
     pub output_pos: Option<String>,
 
     /// Provide up to 256 bytes of user input

rust/pvattest/src/exchange.rs

@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: MIT
 //
 // Copyright IBM Corp. 2024
+#![allow(unused)]
 use anyhow::{anyhow, bail, Error, Result};
 use pv::{assert_size, request::MagicValue, uv::AttestationCmd, uv::ConfigUid};
 use std::{

rust/pvebc/95sel-ebc/boot.mount

@@ -0,0 +1,28 @@
+[Unit]
+Description=Mount /boot early in initramfs
+
+# Initramfs requirement
+DefaultDependencies=no
+# Make absolutely sure this only runs in initramfs (and not post-pivot if the
+# unit ever appears there)
+ConditionPathExists=/etc/initrd-release
+ConditionKernelCommandLine=root
+
+# we use /dev/disk/by-label because it identifies the boot partition system
+# independently IF set up correctly
+Requires=dev-disk-by\x2dlabel-boot.device
+
+# Ordering dependencies
+After=dev-disk-by\x2dlabel-boot.device
+Before=sel-ebc-pvebc.service
+
+[Mount]
+# system independent identification of boot partition requires that the label
+# boot is set for the boot partition
+What=/dev/disk/by-label/boot
+Where=/boot
+Type=auto
+Options=defaults
+
+[Install]
+WantedBy=sel-ebc-pvebc.service

rust/pvebc/95sel-ebc/module-setup.sh

@@ -0,0 +1,76 @@
+#!/bin/bash
+# SPDX-License-Identifier: MIT
+#
+# Copyright IBM Corp.
+
+
+# Called by dracut
+check() {
+	# always include
+	return 0
+}
+
+# Called by dracut
+depends() {
+	# We need systemd in the initramfs
+	echo systemd
+	echo systemd-udevd
+	echo crypt
+	echo dm
+	return 0
+}
+
+# Called by dracut
+installkernel() {
+	# kernel modules needed for opening an encrypted rfs
+	instmods -c uvdevice
+	instmods -c paes_s390
+	instmods -c pkey_uv
+	instmods -c pkey_pckmo
+	instmods -c pkey
+}
+
+# Called by dracut
+install() {
+	# shellcheck disable=SC2154
+	# moddir, systemdsystemunitdir, and initdir are provided by dracut
+	# Copy the units into the initramfs' systemd unit dir
+	inst_simple "$moddir/sel-ebc.target" \
+		"$systemdsystemunitdir/sel-ebc.target"
+	inst_simple "$moddir/sel-ebc-pvebc.service" \
+		"$systemdsystemunitdir/sel-ebc-pvebc.service"
+	inst_simple "$moddir/sel-ebc-paes-enforce.service" \
+		"$systemdsystemunitdir/sel-ebc-paes-enforce.service"
+	inst_simple "$moddir/sel-ebc-override-crypttab.service" \
+		"$systemdsystemunitdir/sel-ebc-override-crypttab.service"
+	inst_simple "$moddir/boot.mount" \
+		"$systemdsystemunitdir/boot.mount"
+
+	# already exisitng unit we depend on for kernel modules
+	inst_simple /usr/lib/systemd/system/systemd-modules-load.service \
+		"$systemdsystemunitdir/systemd-modules-load.service"
+
+	# wrapper for sel-ebc.service
+	inst_simple "$moddir/pvebc-wrapper.sh" \
+		"/etc/sel-ebc/pvebc-wrapper.sh"
+
+	# override crypttab
+	inst_simple "$moddir/override-crypttab.sh" \
+		"/etc/sel-ebc/override-crypttab.sh"
+
+	# copy main application
+	inst_binary "/usr/bin/pvebc"
+	inst_binary "/usr/bin/pvsecret"
+
+	inst_simple "$moddir/sel-ebc.crypttab" "/etc/sel-ebc/crypttab"
+
+	# Create the enablement symlinks in the image using host systemctl:
+	# shellcheck disable=SC2154
+	inst_dir "$initdir/etc/systemd/system"
+	systemctl --root "$initdir" --no-reload --quiet enable sel-ebc.target
+	systemctl --root "$initdir" --no-reload --quiet enable sel-ebc-pvebc.service
+	systemctl --root "$initdir" --no-reload --quiet enable sel-ebc-override-crypttab.service
+	systemctl --root "$initdir" --no-reload --quiet enable sel-ebc-paes-enforce.service
+	systemctl --root "$initdir" --no-reload --quiet enable systemd-modules-load.service
+	systemctl --root "$initdir" --no-reload --quiet enable boot.mount
+}

rust/pvebc/95sel-ebc/override-crypttab.sh

@@ -0,0 +1,20 @@
+#!/bin/bash
+# SPDX-License-Identifier: MIT
+#
+# Copyright IBM Corp.
+
+IBM_RSRC_DIR="/etc/sel-ebc"
+
+if [[ ! -f "${IBM_RSRC_DIR}/crypttab" ]]; then
+	echo "Error: source file $IBM_RSRC_DIR/crypttab does not exist"
+	exit 1
+fi
+
+# Unconditionally override /etc/crypttab to ensure correct EBC configuration
+cp "${IBM_RSRC_DIR}/crypttab" "/etc/crypttab"
+
+systemctl daemon-reload
+
+systemctl restart systemd-cryptsetup@cryptroot_mapper.service
+
+exit 0

rust/pvebc/95sel-ebc/pvebc-wrapper.sh

@@ -0,0 +1,63 @@
+#!/bin/bash
+# SPDX-License-Identifier: MIT
+#
+# Copyright IBM Corp.
+
+SYSFS=/sys/firmware/uv/prot_virt_guest
+SICS=/boot/sics
+EBC_TMPFS=/run/sel-ebc
+TOC=toc.asr
+ASR_NAME=luks-rfs-passphrase
+
+# Early exit for non SEL guests
+if [[ ! -e $SYSFS ]]; then
+	echo "Not running in a SEL guest."
+	exit 1
+fi
+if [[ $(cat $SYSFS) -ne 1 ]]; then
+	echo "Not running in a SEL guest."
+	exit 1
+fi
+echo "Running in SEL guest."
+
+# Copy EBC resources from /boot/sics to tmpfs for security
+# This protects against host injection attacks by moving resources to UV-protected RAM
+echo "Copying EBC resources from $SICS to $EBC_TMPFS"
+if ! mkdir -p "$EBC_TMPFS"; then
+	echo "Failed to create $EBC_TMPFS"
+	exit 1
+fi
+
+# Copy only .asr and .pol files
+for file in "$SICS"/*.asr "$SICS"/*.pol; do
+	if [[ -f "$file" && ! -L "$file" ]]; then
+		cp "$file" "$EBC_TMPFS/" || {
+			echo "Failed to copy $file to $EBC_TMPFS"
+			exit 1
+		}
+	fi
+done
+
+# Verify toc.asr was copied
+if [[ ! -f "$EBC_TMPFS/$TOC" ]]; then
+	echo "Error: $EBC_TMPFS/$TOC does not exist after copy"
+	exit 1
+fi
+
+# execute the actual tool with the copied toc.asr
+pvebc --toc "$EBC_TMPFS/$TOC"
+rc=$?
+if [[ $rc -ne 0 ]]; then
+	exit $rc
+fi
+
+# Retrieve and check for dummy LUKS passphrase
+pvsecret retrieve --inform name -o "$EBC_TMPFS/$ASR_NAME" --outform bin "$ASR_NAME"
+
+if [[ ! -f "$EBC_TMPFS/$ASR_NAME" ]]; then
+	echo "$EBC_TMPFS/$ASR_NAME does not exist"
+fi
+
+chmod 400 "$EBC_TMPFS/$ASR_NAME"
+
+exit 0

rust/pvebc/95sel-ebc/sel-ebc-override-crypttab.service

@@ -0,0 +1,37 @@
+[Unit]
+Description=Override crypttab
+
+# boot partition contains SICS
+# Loading of kernel modules is required which are needed for protected keys
+Requires=systemd-modules-load.service
+Requires=boot.mount
+
+# Ensure this runs before the handoff to the real root, if that's required:
+After=boot.mount
+After=systemd-modules-load.service
+Before=cryptsetup-pre.target
+Before=cryptsetup.target
+Before=systemd-cryptsetup@.service
+Before=initrd-root-device.target
+After=sel-ebc-pvebc.service
+
+# Initramfs requirement
+DefaultDependencies=no
+# Make absolutely sure this only runs in initramfs
+ConditionPathExists=/etc/initrd-release
+ConditionKernelCommandLine=rd.sel-ebc
+ConditionKernelCommandLine=root
+
+[Service]
+Type=oneshot
+ExecStart=/bin/bash /etc/sel-ebc/override-crypttab.sh
+RemainAfterExit=yes
+# If pvebc fails immediately abort boot
+FailureAction=poweroff-immediate
+# boot partition is unencrypted and contains SICS so we can get logs out this way
+# logs do not leek any sensitive information
+StandardOutput=file:/boot/sics/log
+StandardError=file:/boot/sics/log
+
+[Install]
+RequiredBy=sel-ebc.target

rust/pvebc/95sel-ebc/sel-ebc-paes-enforce.service

@@ -0,0 +1,27 @@
+[Unit]
+Description=Enforce PAES encrypted root fs for SEL guests
+
+# Ensure this runs before the handoff to the real root, if that's required:
+After=cryptsetup.target
+After=initrd-root-device.target
+Before=sysroot.mount
+
+# Initramfs requirement
+DefaultDependencies=no
+# Make absolutely sure this only runs in initramfs
+ConditionPathExists=/etc/initrd-release
+ConditionKernelCommandLine=rd.sel-ebc
+ConditionKernelCommandLine=root
+
+[Service]
+Type=oneshot
+ExecStart=bash -c 'dmsetup table /dev/disk/by-label/root | grep "paes-xts-plain64"'
+FailureAction=poweroff-immediate
+RemainAfterExit=yes
+
+# logs do not leek any sensitive information
+StandardOutput=file:/boot/sics/log
+StandardError=file:/boot/sics/log
+
+[Install]
+RequiredBy=sel-ebc.target

rust/pvebc/95sel-ebc/sel-ebc-pvebc.service

@@ -0,0 +1,36 @@
+[Unit]
+Description=Run pvebc during early boot to process SICS
+
+# boot partition contains SICS
+# Loading of kernel modules is required which are needed for protected keys
+Requires=systemd-modules-load.service
+Wants=boot.mount
+
+# Ensure this runs before the handoff to the real root, if that's required:
+Before=initrd-root-device.target
+Before=cryptsetup-pre.target
+Before=cryptsetup.target
+After=boot.mount
+After=systemd-modules-load.service
+
+# Initramfs requirement
+DefaultDependencies=no
+# Make absolutely sure this only runs in initramfs
+ConditionPathExists=/etc/initrd-release
+AssertPathIsDirectory=/boot/sics
+ConditionKernelCommandLine=rd.sel-ebc
+
+[Service]
+Type=oneshot
+# execute pvebc
+ExecStart=/bin/bash /etc/sel-ebc/pvebc-wrapper.sh
+RemainAfterExit=yes
+# If pvebc fails immediately abort boot
+FailureAction=poweroff-immediate
+# boot partition is unencrypted and contains SICS so we can get logs out this way
+# logs do not leek any sensitive information
+StandardOutput=file:/boot/sics/log
+StandardError=file:/boot/sics/log
+
+[Install]
+RequiredBy=sel-ebc.target

rust/pvebc/95sel-ebc/sel-ebc.crypttab

@@ -0,0 +1 @@
+cryptroot_mapper /dev/disk/by-label/cryptroot /run/sel-ebc/luks-rfs-passphrase

rust/pvebc/95sel-ebc/sel-ebc.target

@@ -0,0 +1,27 @@
+[Unit]
+Description=Target unit for IBM Secure Execution for Linux early boot customization
+
+# enable for use in initramfs
+DefaultDependencies=no
+
+# if not met start the target without starting its dependencies
+ConditionPathExists=/etc/initrd-release
+ConditionKernelCommandLine=rd.sel-ebc
+
+# if not met the target is considered failed
+# AssertVirtualization=kvm
+
+# if target fails abort immediately
+FailureAction=poweroff-immediate
+
+Requires=sel-ebc-pvebc.service
+Requires=sel-ebc-override-crypttab.service
+Requires=sel-ebc-paes-enforce.service
+
+# ordering dependencies
+After=systemd-modules-load.service
+Before=initrd-root-device.target
+
+[Install]
+# most basic hook to start target by default
+WantedBy=initrd.target

rust/pvebc/Cargo.toml

@@ -0,0 +1,22 @@
+[package]
+name = "pvebc"
+version = "0.12.0"
+edition.workspace = true
+license.workspace = true
+rust-version.workspace = true
+
+[dependencies]
+sha2 = "0.10"
+hex = "0.4"
+clap = { version = "4.5", features = ["derive"] }
+pv_core = { path = "../pv_core" , package = "s390_pv_core" }
+utils = { path = "../utils" }
+anyhow = { version = "1.0.95", features = ["std"] }
+zerocopy = { version = "0.8.27", features = ["derive"] }
+
+[build-dependencies]
+clap = { version ="4.5", features = ["derive"]}
+clap_complete = "4.5"
+
+[lints]
+workspace = true

rust/pvebc/man/pvebc.1

@@ -0,0 +1,165 @@
+.\" Copyright IBM Corp.
+.\" s390-tools is free software; you can redistribute it and/or modify
+.\" it under the terms of the MIT license. See LICENSE for details.
+.\"
+
+.TH "PVEBC" "1" "2026-03-24" "s390-tools" "EBC Management Manual"
+.nh
+.ad l
+.SH NAME
+pvebc \- Protected Virtualization Early Boot Customization Tool
+.SH SYNOPSIS
+.nf
+.fam C
+pvebc [OPTIONS] \-\-toc <FILE>
+.fam C
+.fi
+.SH DESCRIPTION
+Use the \fBpvebc\fR tool to process add-secret request files (\fBtoc.asr\fR)
+that define the root of early boot customization (EBC) resources for
+IBM Secure Execution for Linux (SEL) guests. The tool validates the
+integrity and completeness of add-secret request (ASR) files using
+cryptographic verification to prevent tampering during transmission
+over unsecured channels.
+
+The tool operates on a structure consisting of three types of files:
+.RS 4
+\- \fBtoc.asr\fP: The root add\-secret request file that references the table of contents (TOC policy).
+
+\- \fBtoc.pol\fP: The table of contents policy file that contains a list of AES\-GCM authentication tags (MAC tags)
+
+\- \fBASR files\fP: Individual add-secret request files to be added to the guest
+
+.RE
+The integrity protection mechanism works as follows:
+.RS 4
+.IP "1." 3
+Each add-secret request file includes an AES\-GCM authentication tag (last 16 bytes), which provides integrity
+protection for the file.
+.IP "2." 3
+The toc.pol file lists the expected message authentication code (MAC) tags of all add-secret request files.
+.IP "3." 3
+The toc.asr file contains a cryptographically protected reference to toc.pol, consisting
+of the relative file path and a SHA\-512 hash of the policy file.
+.IP "4." 3
+The AES\-GCM authentication tag of toc.asr protects the integrity of this reference.
+.RE
+
+This structure prevents attackers from:
+.RS 4
+\- Removing add-secret request files from the set
+
+\- Inserting unauthorized add-secret request files
+
+\- Modifying existing add-secret request files
+
+\- Altering the policy file
+
+.RE
+\fBpvebc\fR validates the entire chain of trust by:
+.RS 4
+\- Verifying that the SHA\-512 hash of toc.pol matches the reference stored in toc.asr
+
+\- Checking that all MAC tags listed in toc.pol correspond to existing add-secret request files
+
+\- Ensuring that all add-secret request files are present and unmodified
+
+.RE
+The tool can run in one of two modes:
+.RS 4
+\- \fBNormal mode\fP: Validates add\-secret requests and adds the defined secrets to the SEL guest (z/Architecture only)
+
+\- \fBDry\-run mode\fP: Validates the request structure without adding secrets; useful for verification on non\-SEL systems
+
+.RE
+.SH OPTIONS
+.PP
+\-t, \-\-toc <FILE>
+.RS 4
+Specify the table\-of\-contents add\-secret request file toc.asr, which serves as the root of the EBC
+resources. This file must contain a reference to toc.pol in its user data field,
+as generated by \fBpvsecret\fR with the \fB\-\-policy\fR option. The toc.asr
+file cryptographically links to the policy file by using a relative path and
+SHA\-512 hash, ensuring the integrity of the complete EBC structure.
+.RE
+.RE
+.PP
+\-\-dry\-run
+.RS 4
+Validate the EBC structure without adding the add\-secret requests to the
+ultravisor. Use this option to verify the integrity of the generated
+policy file and the links between add\-secret request files and the policy.
+This mode can be run on non\-SEL guests to validate the
+structure before deployment. When \fB\-\-dry\-run\fR is specified, the tool
+performs all cryptographic verifications but skips the actual addition of
+secrets to the ultravisor secret store.
+.RE
+.RE
+.PP
+\-\-version
+.RS 4
+Print version information and exit.
+.RE
+.RE
+.PP
+\-h, \-\-help
+.RS 4
+Print help information.
+.RE
+.RE
+
+.SH FILES
+.PP
+The \fBpvebc\fR tool operates on the following file types (actual names may
+differ):
+.PP
+\fBtoc.asr\fR
+.RS 4
+The root add\-secret request file that contains a reference to the table\-of\-content \fBtoc.pol\fR in its
+user data field. This file is generated by using \fBpvsecret create\fR with the
+\fB\-\-policy\fR option.
+.RE
+.PP
+\fBtoc.pol\fR
+.RS 4
+The policy file containing a newline\-separated list of AES\-GCM authentication
+tags (MAC tags) in hexadecimal format. Each entry corresponds to one
+add\-secret request file.
+This file is generated by using \fBpvsecret create\fR with the
+\fB\-\-toc\-policy\fR option.
+.RE
+.PP
+\fB*.asr\fR
+.RS 4
+Individual add\-secret request files that contain the actual secrets to be added to
+the SEL guest. Each add\-secret request file includes an AES\-GCM authentication tag (the last 16 bytes), which
+provides integrity protection.
+.RE
+
+.SH EXIT STATUS
+.PP
+\fBpvebc\fR returns the following exit codes:
+.PP
+\fB0\fR
+.RS 4
+Success. All validations passed and secrets were added (if not in dry\-run mode).
+.RE
+.PP
+\fB1\fR
+.RS 4
+Failure. An error occurred during validation or secret addition. Error details
+are printed to stderr.
+.RE
+
+.SH NOTES
+.PP
+\- All file paths in a policy reference must be relative to the directory
+that contains the referencing file.
+.PP
+\- On z/Architecture systems, the tool requires access to the ultravisor device
+(\fB/dev/uv\fR) to add secrets.
+.PP
+
+.SH "SEE ALSO"
+.sp
+\fBpvsecret\fR(1), \fBpvsecret\-create\fR(1), \fBpvsecret\-add\fR(1)

rust/pvebc/src/cli.rs

@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: MIT
+//
+// Copyright IBM Corp.
+
+use std::{path::PathBuf, sync::OnceLock};
+
+use clap::{ArgAction, Parser, ValueHint};
+
+static VERSION: OnceLock<String> = OnceLock::new();
+
+/// The pvebc command processes an AddSecretRequest file (toc.asr) that defines the root of EBC
+/// resources. It validates references to the associated toc.pol policy and manages their addition,
+/// with options for verification and dry-run execution.
+#[derive(Parser)]
+#[command(long_version=ver(), disable_version_flag(true))]
+pub struct Cli {
+    /// Print version information and exit.
+    #[arg(long, action=ArgAction::Version)]
+    version: (),
+
+    /// Specifies the toc.asr which is the root of the EBC resources
+    ///
+    /// Specify the add-secret request file toc.asr that serves as the root of the EBC resources.
+    /// Its user data must contain a reference to toc.pol as generated by pvsecret with the --policy
+    /// option.
+    #[arg(short, long, value_name = "FILE", value_hint = ValueHint::FilePath)]
+    pub toc: PathBuf,
+
+    /// Prevents adding of the AddSecretRequest
+    ///
+    /// Do not add the AddSecretRequest. Use this option to validate a generated policy. It can be
+    /// run on a non-SEL guest to verify ASR-to-policy links and the associated policy  toc.pol.
+    #[arg(long)]
+    pub dry_run: bool,
+}
+
+fn ver() -> &'static str {
+    VERSION.get_or_init(|| utils::tools_version_fmt!(2026))
+}

rust/pvebc/src/ebc_utils.rs

@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: MIT
+//
+// Copyright IBM Corp.
+
+use anyhow::{bail, Context, Result};
+use pv_core::misc::open_file;
+use std::{io::Read, path::Path};
+
+/// Length of the MAC tag in bytes (last 16 bytes of AddSecretRequest files)
+pub const MAC_TAG_LEN: usize = 16;
+
+/// Opens a file and returns a boxed reader
+pub fn get_reader_from_filepath<P: AsRef<Path>>(filepath: P) -> Result<Box<dyn Read>> {
+    Ok(Box::new(open_file(filepath)?))
+}
+
+/// Get reader from &Path with additional context on error
+pub fn get_reader(filepath: &Path) -> Result<Box<dyn Read>> {
+    get_reader_from_filepath(filepath)
+        .with_context(|| format!("unable to get reader from {:?}", filepath))
+}
+
+/// Read all data from a reader into a Vec<u8>
+pub fn get_data(rd_in: &mut Box<dyn Read>) -> Result<Vec<u8>> {
+    let mut data_in = Vec::new();
+    rd_in
+        .read_to_end(&mut data_in)
+        .context("Cannot read input file")?;
+
+    Ok(data_in)
+}
+
+/// Extract the MAC tag (last 16 bytes) from an AddSecretRequest file
+///
+/// # Errors
+///
+/// Returns an error if:
+/// - The file cannot be read
+/// - The file is smaller than MAC_TAG_LEN bytes
+pub fn get_mac_tag(filepath: &Path) -> Result<Vec<u8>> {
+    let mut rd_in = get_reader(filepath)?;
+    let data_in = get_data(&mut rd_in)?;
+
+    if data_in.len() < MAC_TAG_LEN {
+        bail!(
+            "File {:?} too small to contain MAC tag (expected at least {} bytes, got {})",
+            filepath,
+            MAC_TAG_LEN,
+            data_in.len()
+        );
+    }
+
+    Ok(data_in[data_in.len() - MAC_TAG_LEN..].to_vec())
+}

rust/pvebc/src/main.rs

@@ -0,0 +1,369 @@
+// SPDX-License-Identifier: MIT
+//
+// Copyright IBM Corp.
+
+//! # pvebc - Protected Virtualization Early Boot Customization Tool
+//!
+//! This tool processes AddSecretRequest files (toc.asr) that define the root of EBC
+//! (Early Boot Customization) resources. It validates references to associated
+//! toc.pol policies and manages their addition to the system.
+//!
+//! ## Features
+//!
+//! - Validates AddSecretRequest files and their associated policies
+//! - Verifies cryptographic hashes of policy files using SHA-256
+//! - Supports dry-run mode for validation without system changes
+//! - MAC tag validation for AddSecretRequest files
+
+#![allow(missing_docs)]
+
+mod cli;
+mod ebc_utils;
+
+#[cfg(target_arch = "s390x")]
+use pv_core::uv::{AddCmd, UvDevice};
+#[cfg(target_arch = "s390x")]
+use utils::get_reader_from_cli_file_arg;
+
+use anyhow::{bail, Context, Error, Result};
+use clap::Parser;
+use pv_core::{
+    misc::{decode_hex, encode_hex},
+    PolicyReference,
+};
+use std::{
+    fs::{self, File},
+    io::{BufRead, Read},
+    path::{Path, PathBuf},
+    process::ExitCode,
+    str::from_utf8,
+};
+// Don't use openssl here because this tool is intended to run in the initramfs
+// phase of the boot and there we don't want to dynamically link against a C lib
+use sha2::{self, Digest};
+use zerocopy::TryFromBytes;
+
+use crate::cli::Cli;
+use crate::ebc_utils::{get_data, get_mac_tag, get_reader};
+
+/// Offset in bytes where user data starts in an ASRCB v1 structure
+const V1_USER_DATA_OFFS: usize = 536;
+/// Size in bytes of the user data field in an ASRCB
+const USER_DATA_SIZE: usize = 512;
+
+/// Validates and resolves a policy name relative to a base directory
+///
+/// # Errors
+/// Returns an error if path traversal is detected or the resolved path
+/// is outside the base directory
+fn validate_and_resolve_policy_path(base: &Path, name: &str) -> Result<PathBuf> {
+    // Validate path to prevent directory traversal
+    if name.contains("..") || name.starts_with('/') {
+        bail!("Invalid policy name: path traversal detected in '{}'", name);
+    }
+
+    let resolved = base.join(name);
+
+    // Ensure the resulting path is within the expected directory
+    if !resolved.starts_with(base) {
+        bail!(
+            "Policy path '{}' is outside the expected directory",
+            resolved.display()
+        );
+    }
+
+    Ok(resolved)
+}
+
+/// Extracts and validates the policy name from a PolicyReference
+///
+/// # Errors
+/// Returns an error if the policy name contains invalid UTF-8 or is empty
+fn extract_policy_name(policy_ref: &PolicyReference) -> Result<String> {
+    let name = from_utf8(&policy_ref.name)
+        .context("Policy name contains invalid UTF-8")?
+        .trim_matches('\0')
+        .to_string();
+
+    if name.is_empty() {
+        bail!("Policy name is empty");
+    }
+
+    Ok(name)
+}
+
+/// Computes the SHA-256 hash of data from a reader.
+///
+/// Reads data from the provided reader in 4096-byte chunks and computes
+/// the SHA-256 hash of the entire content.
+///
+/// # Parameters
+///
+/// * `r` - A reader providing the data to hash
+///
+/// # Returns
+///
+/// Returns a `Vec<u8>` containing the 32-byte SHA-256 hash, or an error
+/// if reading fails.
+///
+/// # Errors
+///
+/// Returns an error if reading from the reader fails.
+pub fn sha256_hash<R: Read>(mut r: R) -> Result<Vec<u8>, Error> {
+    let mut hasher = sha2::Sha256::new();
+    let mut buf: [u8; 4096] = [0; 4096];
+
+    loop {
+        let read = r.read(&mut buf)?;
+        if read == 0 {
+            break;
+        }
+        hasher.update(&buf[..read]);
+    }
+
+    Ok(hasher.finalize().to_vec())
+}
+
+/// Extract the user data from an ASRCB
+///
+/// # Errors
+///
+/// Returns an error if the ASRCB is too small to contain user data
+fn get_user_data(asrcb: &[u8]) -> Result<Option<Vec<u8>>> {
+    if asrcb.len() < V1_USER_DATA_OFFS + USER_DATA_SIZE {
+        bail!(
+            "ASRCB too small (expected at least {} bytes, got {})",
+            V1_USER_DATA_OFFS + USER_DATA_SIZE,
+            asrcb.len()
+        );
+    }
+
+    let user_data = &asrcb[V1_USER_DATA_OFFS..V1_USER_DATA_OFFS + USER_DATA_SIZE];
+    Ok(Some(user_data.to_vec()))
+}
+
+/// Get user data from AddSecretRequest
+fn verify_user_data(filepath: &Path) -> Result<Option<Vec<u8>>> {
+    let mut rd_in = get_reader(filepath)?;
+    let data_in = get_data(&mut rd_in)?;
+
+    get_user_data(&data_in).context("Could not verify the Add-secret request")
+}
+
+/// Adds the given AddSecretRequest (if dryrun == false) and parses the contained user data
+///
+/// # Returns
+///
+/// On Success returns the PolicyReference parsed from the given AddSecretRequest
+///
+/// # Errors
+///
+/// returns an error if
+/// - unable to open UvDevice
+/// - reader from path fails
+/// - adding of ASR fails
+/// - verify_user_data fails
+/// - unable to convert user data to PolicyReference
+fn asr_to_pol_ref(filepath: &Path, dryrun: bool) -> Result<Option<PolicyReference>> {
+    print!("Add-Secret-Request: \"{}\"", filepath.display());
+    if !dryrun {
+        #[cfg(target_arch = "s390x")]
+        {
+            let uv = UvDevice::open()?;
+            let mut rd_in = get_reader_from_cli_file_arg(filepath)?;
+            let mut cmd = AddCmd::new(&mut rd_in)
+                .context(format!("Processing input file {:?}", filepath.to_str()))?;
+            uv.send_cmd(&mut cmd)?;
+            println!();
+        }
+        #[cfg(not(target_arch = "s390x"))]
+        {
+            println!(" (skip adding: not running on s390x architecture)");
+        }
+    } else {
+        println!(" (skip adding: dry-run mode)");
+    }
+
+    Ok(match verify_user_data(filepath)? {
+        Some(ud) => {
+            let ret = PolicyReference::try_read_from_bytes(&ud).map_err(|e| {
+                anyhow::anyhow!("Failed to parse PolicyReference from user data: {:?}", e)
+            })?;
+            println!("    Reference: {}", ret);
+            Some(ret)
+        }
+        None => None,
+    })
+}
+
+/// Read the mac tag list of the toc policy, parse and verify every tag
+fn execute_toc_pol(path: &Path, toc_pol_ref: PolicyReference) -> Result<Vec<PathBuf>> {
+    let name = extract_policy_name(&toc_pol_ref)?;
+    let toc_path = validate_and_resolve_policy_path(path, &name)?;
+    let mut ret: Vec<PathBuf> = Vec::new();
+    let mut rd_in = get_reader(&toc_path)?;
+    let data_in = get_data(&mut rd_in)?;
+
+    let macs = data_in.lines();
+    let base = get_base_dir(&toc_path);
+
+    println!("Mac tags in {:?}:", toc_path);
+    for mac in macs {
+        let mut mac_tag = Vec::new();
+        let mac_tag_ref = match mac {
+            Ok(s) => s,
+            _ => continue,
+        };
+        print!("    {}", mac_tag_ref);
+
+        let entries = fs::read_dir(base)?;
+        for entry in entries {
+            let path = entry?;
+            let filepath = path.path();
+            let ext = match filepath.extension() {
+                Some(e) => e,
+                None => continue,
+            };
+            if ext == "asr" {
+                mac_tag = get_mac_tag(filepath.as_path())?;
+
+                if mac_tag == decode_hex(&mac_tag_ref)? {
+                    println!("    -> {}", filepath.display());
+                    ret.push(filepath.clone());
+
+                    break;
+                }
+            }
+        }
+
+        if mac_tag != decode_hex(&mac_tag_ref)? {
+            bail!(
+                "No ASR with mac tag \"{}\" found in {:?}",
+                mac_tag_ref,
+                base
+            );
+        }
+    }
+
+    println!();
+
+    Ok(ret)
+}
+
+/// Checks whether the given hash in polref matches the actual hash of the referenced file
+fn verify_policy(basename: &Path, polref: PolicyReference) -> Result<()> {
+    let name = extract_policy_name(&polref)?;
+    let filepath = validate_and_resolve_policy_path(basename, &name)?;
+    println!("Verify \"{}\"", filepath.display());
+
+    println!("    Referenced: {}", encode_hex(polref.hash));
+    let f = File::open(filepath.as_path())?;
+
+    let check_hash = sha256_hash(f)?;
+    println!("    Calculated: {}", encode_hex(&check_hash));
+
+    if check_hash != polref.hash {
+        bail!(
+            "{:?} ({}) does not match expected hash ({})",
+            filepath,
+            encode_hex(&check_hash),
+            encode_hex(polref.hash)
+        );
+    }
+
+    Ok(())
+}
+
+/// For every AddSecretRequest find the corresponding policy
+fn execute_asrs(asrs: Vec<PathBuf>, dryrun: bool) -> Result<()> {
+    // loop over ASRs
+    for asr in asrs {
+        // get the referenced policy
+        let pol_ref = match asr_to_pol_ref(asr.as_path(), dryrun)? {
+            Some(pr) => pr,
+            None => continue,
+        };
+
+        if pol_ref.hash.iter().all(|&b| b == 0) {
+            continue;
+        }
+
+        let base = get_base_dir(asr.as_path());
+        let name = extract_policy_name(&pol_ref)?;
+        let _pol_path = validate_and_resolve_policy_path(base, &name)?;
+
+        // verify the integrity of the referenced policy
+        verify_policy(base, pol_ref)?;
+    }
+
+    Ok(())
+}
+
+/// Get the parent directory of the given file
+fn get_base_dir(filepath: &Path) -> &Path {
+    match filepath.parent() {
+        Some(p) => p,
+        None => Path::new(""),
+    }
+}
+
+/// Print a given error and return the failure exit code
+fn error_to_exit_code(err: Error) -> ExitCode {
+    eprintln!("Error: {}", err);
+
+    ExitCode::FAILURE
+}
+
+/// main function
+pub fn main() -> ExitCode {
+    let opt: Cli = Cli::parse();
+
+    let dryrun = opt.dry_run;
+
+    if dryrun {
+        println!("Dry-run mode detected, skipping secret addition");
+        println!();
+    }
+
+    // get toc asr filepath - wrapper script has already copied files to tmpfs
+    let toc_asr = &opt.toc;
+    let basename = match toc_asr.parent() {
+        Some(p) => p,
+        None => {
+            return error_to_exit_code(Error::msg("Unable to get directory from specified path"))
+        }
+    };
+
+    // get the PolicyReference from toc.asr to toc.pol
+    let toc_pol = match asr_to_pol_ref(toc_asr, dryrun) {
+        Ok(o) => match o {
+            Some(r) => r,
+            None => {
+                return error_to_exit_code(Error::msg(
+                    "There is no linked policy in the supplied ASR",
+                ))
+            }
+        },
+        Err(e) => return error_to_exit_code(e),
+    };
+
+    // verify the integrity on the referenced toc.pol
+    if let Err(e) = verify_policy(basename, toc_pol) {
+        return error_to_exit_code(e);
+    }
+
+    println!();
+
+    // get and verify ASRs from mac list of toc policy
+    let asr_list = match execute_toc_pol(basename, toc_pol) {
+        Ok(v) => v,
+        Err(e) => return error_to_exit_code(e),
+    };
+
+    // execute ASRs
+    if let Err(e) = execute_asrs(asr_list, dryrun) {
+        return error_to_exit_code(e);
+    }
+
+    ExitCode::SUCCESS
+}

rust/pvimg/src/pv_utils/se_hdr/flags.rs

@@ -28,7 +28,7 @@ use std::{fmt::Display, fmt::LowerHex, marker::PhantomData, mem::size_of};
 
 use pv::misc::{Flags, Msb0Flags64};
 
-pub trait IntoEnumIterator {
+pub trait IntoEnumIterator: Sized {
     /// Returns an iterator over all variants of this enum.
     fn iter() -> impl Iterator<Item = Self>;
 }

rust/pvimg/src/pv_utils/serializing.rs

@@ -98,7 +98,7 @@ pub mod serde_base64 {
         D: Deserializer<'de>,
     {
         let s = String::deserialize(deserializer)?;
-        BASE64_STANDARD.decode(&s).map_err(serde::de::Error::custom)
+        BASE64_STANDARD.decode(s).map_err(serde::de::Error::custom)
     }
 }
 
@@ -124,7 +124,7 @@ pub mod serde_base64_array {
     {
         let s = String::deserialize(deserializer)?;
         let decoded = BASE64_STANDARD
-            .decode(&s)
+            .decode(s)
             .map_err(serde::de::Error::custom)?;
         try_copy_slice_to_array(&decoded).map_err(serde::de::Error::custom)
     }

rust/pvsecret/Cargo.toml

@@ -13,6 +13,7 @@ anyhow = { version = "1.0.95", features = ["std"] }
 clap = { version ="4.5", features = ["derive", "wrap_help"]}
 log = { version = "0.4.25", features = ["std", "release_max_level_debug"] }
 serde_yaml = "0.9"
+zerocopy = "0.8"
 
 pv = { path = "../pv" , package = "s390_pv" }
 utils = { path = "../utils"}

rust/pvsecret/man/pvsecret-create.1

@@ -194,6 +194,28 @@ Optional. No user\-data by default.
 .RE
 .RE
 .PP
+\-\-policy <FILE>
+.RS 4
+Links an add\-secret request to a policy file.
+This option embeds a reference to a policy in the add\-secret request user data field. The
+reference includes the relative file path and the SHA-512 hash of the
+policy file, enabling verification of the policy file’s integrity.
+This option conflicts with \fB\-\-user\-data\fR, because both options use the
+same user data field in the add\-secret request structure.
+.RE
+.RE
+.PP
+\-\-toc\-policy <FILE>
+.RS 4
+Adds the AES\-GCM authentication tag to a table-of-contents (TOC) policy file.
+This option appends the AES\-GCM authentication tag to the specified TOC policy
+file. This allows the TOC policy to maintain a list of all add\-secret request MAC tags for
+completeness verification during boot. During verification, the TOC checks the
+AES\-GCM tags against this list to ensure that all expected add\-secret request are present and
+unmodified.
+.RE
+.RE
+.PP
 \-\-user\-sign\-key <FILE>
 .RS 4
 Use the content of FILE as user signing key. Adds a signature calculated from

rust/pvsecret/src/cli.rs

@@ -130,6 +130,30 @@ pub struct CreateSecretOpt {
     #[arg(long, value_name = "FILE", value_hint = ValueHint::FilePath,)]
     pub user_data: Option<String>,
 
+    /// Links an Add‑Secret-Request (ASR) to a policy file.
+    ///
+    /// This option embeds a PolicyReference in the ASR user data field. The PolicyReference
+    /// includes the relative file path and the SHA‑512 hash of the policy file, allowing the
+    /// policy’s integrity to be verified.
+    ///
+    /// This option conflicts with --user-data, because both options use the same user data field in
+    /// the ASR structure.
+    #[arg(long, value_name = "FILE", value_hint = ValueHint::FilePath, conflicts_with("user_data"))]
+    pub policy: Option<String>,
+
+    /// Adds the AES‑GCM authentication tag to a TOC policy file.
+    ///
+    /// This option appends the AES‑GCM authentication tag to the specified TOC policy file. This
+    /// allows the TOC policy to maintain a list of all ASR MAC tags for completeness verification
+    /// during boot. During verification, the TOC checks the MAC tags against this list to ensure
+    /// that all expected ASRs are present and unmodified.
+    #[arg(
+        long = "toc-policy",
+        value_name = "FILE",
+        value_hint = ValueHint::FilePath,
+    )]
+    pub tocpolicy: Option<String>,
+
     /// Use the content of FILE as user signing key.
     ///
     /// Adds a signature calculated from the key in FILE to the add-secret request. The
@@ -265,12 +289,10 @@ impl Display for RetrieveableSecretInpKind {
     }
 }
 
-// all members s390x only
 #[derive(Args, Debug)]
 pub struct AddSecretOpt {
     /// Specify the request to be sent.
     #[arg(value_name = "FILE", value_hint = ValueHint::FilePath,)]
-    #[cfg(target_arch = "s390x")]
     pub input: String,
 
     /// Force the addition of add-secret requests.
@@ -282,7 +304,6 @@ pub struct AddSecretOpt {
 }
 
 #[derive(Copy, Clone, PartialEq, Eq, PartialOrd, Ord, ValueEnum, Debug, Default)]
-#[cfg(target_arch = "s390x")]
 pub enum ListSecretOutputType {
     /// Human-focused, non-parsable output format
     #[default]
@@ -293,17 +314,14 @@ pub enum ListSecretOutputType {
     Bin,
 }
 
-// all members s390x only
 #[derive(Args, Debug)]
 pub struct ListSecretOpt {
     /// Store the result in FILE
     #[arg(value_name = "FILE", default_value = STDOUT, value_hint = ValueHint::FilePath,)]
-    #[cfg(target_arch = "s390x")]
     pub output: String,
 
     /// Define the output format of the list.
     #[arg(long, value_enum, default_value_t)]
-    #[cfg(target_arch = "s390x")]
     pub format: ListSecretOutputType,
 }
 
@@ -331,7 +349,6 @@ pub struct VerifyOpt {
     pub output: String,
 }
 
-// all members s390x only
 #[derive(Args, Debug)]
 pub struct RetrSecretOptions {
     /// Specify the secret ID to be retrieved.
@@ -341,22 +358,18 @@ pub struct RetrSecretOptions {
     /// handle encodes in hexadecimal. Leading zeros are required. If there are multiple secrets in
     /// the store with the same Id there are no guarantees on which specific secret is retrieved.
     /// Use --inform=idx to make sure a specific secret is retrieved.
-    #[cfg(target_arch = "s390x")]
     #[arg(value_name = "ID", value_hint = ValueHint::FilePath)]
     pub input: String,
 
     /// Specify the output path to place the secret value
-    #[cfg(target_arch = "s390x")]
     #[arg(short, long, value_name = "FILE", default_value = STDOUT, value_hint = ValueHint::FilePath)]
     pub output: String,
 
     /// Define input type for the Secret ID
-    #[cfg(target_arch = "s390x")]
     #[arg(long, value_enum, default_value_t)]
     pub inform: RetrInpFmt,
 
     /// Define the output format for the retrieved secret
-    #[cfg(target_arch = "s390x")]
     #[arg(long, value_enum, default_value_t)]
     pub outform: RetrOutFmt,
 }
@@ -478,10 +491,7 @@ mod test {
             vec!["pvsecret", "lock"],
             vec!["pvsecret", "version"],
             vec!["pvsecret", "list"],
-            #[cfg(target_arch = "s390x")]
             vec!["pvsecret", "add", "abc"],
-            #[cfg(not(target_arch = "s390x"))]
-            vec!["pvsecret", "add"],
             vec!["pvsecret", "create", "-k", "abc", "--hdr", "abc", "-o", "abc", "--no-verify", "meta"],
             vec!["pvsecret", "create", "-k", "abc", "--hdr", "abc", "-o", "abc", "--no-verify", "association", "name" ],
             vec!["pvsecret", "create", "-k", "abc", "--hdr", "abc", "-o", "abc", "--no-verify", "update-cck", "--secret", "abc"],
@@ -492,11 +502,8 @@ mod test {
                 "--root-ca", "tttt", "--cck", "cck", "--cuid-hex", "0x11223344556677889900aabbccddeeff", "--pcf", "0x123", "association", "name", "--stdout",
                 "--output-secret", "secret"],
             vec!["pvsecret", "create", "-k", "abc", "--hdr", "abc", "-o", "abc", "--no-verify", "association", "name", "--output-secret", "secret"],
-            #[cfg(target_arch = "s390x")]
             vec!["pvsecret", "list", "--format", "human"],
-            #[cfg(target_arch = "s390x")]
             vec!["pvsecret", "list", "--format", "yaml"],
-            #[cfg(target_arch = "s390x")]
             vec!["pvsecret", "list", "--format", "bin"],
         ];
         // Test for the minimal amount of flags to yield an invalid combination

rust/pvsecret/src/cmd/create.rs

@@ -2,24 +2,30 @@
 //
 // Copyright IBM Corp. 2023, 2024
 
-use std::path::Path;
+use std::{
+    fs::OpenOptions,
+    io::{Read, Write},
+    path::Path,
+};
 
 use anyhow::{anyhow, bail, Context, Error, Result};
 use log::{debug, info, trace, warn};
+use pv::request::openssl;
 use pv::{
     misc::{
-        decode_hex, open_file, pv_guest_bit_set, read_exact_file, read_file, try_parse_u128,
+        decode_hex, encode_hex, open_file, pv_guest_bit_set, read_exact_file, read_file,
-        try_parse_u64, write,
+        try_parse_u128, try_parse_u64, write,
     },
     request::{
         openssl::pkey::{PKey, Private},
-        BootHdrTags, ReqEncrCtx, Request, SymKeyType,
+        BootHdrTags, PolicyReference, ReqEncrCtx, Request, SymKeyType,
     },
     secret::{AddSecretFlags, AddSecretRequest, AddSecretVersion, ExtSecret, GuestSecret},
     uv::ConfigUid,
 };
 use serde_yaml::Value;
 use utils::get_writer_from_cli_file_arg;
+use zerocopy::IntoBytes;
 
 use crate::cli::{AddSecretType, CreateSecretFlags, CreateSecretOpt, RetrieveableSecretInpKind};
 
@@ -33,6 +39,38 @@ where
     Ok(())
 }
 
+/// Computes the SHA-256 hash of data from a reader.
+///
+/// Reads data from the provided reader in 4096-byte chunks and computes
+/// the SHA-256 hash of the entire content.
+///
+/// # Parameters
+///
+/// * `r` - A reader providing the data to hash
+///
+/// # Returns
+///
+/// Returns a `Vec<u8>` containing the 32-byte SHA-256 hash, or an error
+/// if reading fails.
+///
+/// # Errors
+///
+/// Returns an error if reading from the reader fails.
+pub fn sha256_hash<R: Read>(mut r: R) -> Result<Vec<u8>, pv::PvCoreError> {
+    let mut hasher = openssl::Sha256::new();
+    let mut buf: [u8; 4096] = [0; 4096];
+
+    loop {
+        let read = r.read(&mut buf)?;
+        if read == 0 {
+            break;
+        }
+        hasher.update(&buf[..read]);
+    }
+
+    Ok(hasher.finish().to_vec())
+}
+
 fn retrievable(name: &str, secret: &str, kind: &RetrieveableSecretInpKind) -> Result<GuestSecret> {
     let secret_data = read_file(secret, &format!("retrievable {kind}"))?.into();
 
@@ -76,6 +114,14 @@ pub fn create(opt: &CreateSecretOpt) -> Result<()> {
     let rq =
         ReqEncrCtx::random(SymKeyType::Aes256Gcm).context("Failed to generate random input")?;
     let ser_asrbc = asrcb.encrypt(&rq)?;
+
+    if let Some(path) = &opt.tocpolicy {
+        let mac_tag = encode_hex(&ser_asrbc[(ser_asrbc.len() - 16)..]);
+        let mut file = OpenOptions::new().create(true).append(true).open(path)?;
+
+        writeln!(file, "{mac_tag}")?;
+    }
+
     warn!("Successfully generated the request");
     write_out(&opt.output, ser_asrbc, "add-secret request")?;
     info!("Successfully wrote the request to '{}'", &opt.output);
@@ -157,6 +203,17 @@ fn build_asrcb(opt: &CreateSecretOpt) -> Result<AddSecretRequest> {
         warn!("Added empty user-data file.");
     }
 
+    let supplied_ref = opt
+        .policy
+        .as_ref()
+        .map(|s| -> Result<PolicyReference> {
+            let p = Path::new(s);
+            let reference = PolicyReference::new(p, sha256_hash)?;
+            println!("{}", encode_hex(reference.hash));
+            Ok(reference)
+        })
+        .transpose()?;
+
     let user_key = opt
         .user_sign_key
         .as_ref()
@@ -169,6 +226,8 @@ fn build_asrcb(opt: &CreateSecretOpt) -> Result<AddSecretRequest> {
 
     if user_data.is_some() || user_key.is_some() {
         asrcb.set_user_data(user_data.unwrap_or_default(), user_key)?;
+    } else if let Some(ref_val) = supplied_ref {
+        asrcb.set_user_data(ref_val.as_bytes(), None)?;
     }
     Ok(asrcb)
 }

rust/pvsecret/src/main.rs

@@ -14,7 +14,7 @@ use utils::{print_cli_error, print_error, print_version, PvLogger};
 
 static LOGGER: PvLogger = PvLogger;
 static EXIT_LOGGER: u8 = 3;
-const FEATURES: &[&[&str]] = &[cmd::CMD_FN, cmd::UV_CMD_FN];
+const FEATURES: &[&[&str]] = &[cmd::CMD_FN, cmd::UV_CMD_FN, &["+ebc"]];
 
 fn main() -> ExitCode {
     let cli: CliOptions = match CliOptions::try_parse() {

scripts/Makefile

@@ -1,9 +1,10 @@
 include ../common.mak
 
-SCRIPTS = dbginfo.sh zfcpdbf zipl-switch-to-blscfg sclpdbf
+SCRIPTS = dbginfo.sh zfcpdbf zipl-switch-to-blscfg sclpdbf pvics
 # Helper scripts controlled by corresponding systemd services
 SD_HELPER_SCRIPTS = cpictl dumpconf
-MAN_PAGES = dbginfo.sh.8 zfcpdbf.8 zipl-switch-to-blscfg.8
+MAN_PAGES = dbginfo.sh.8 zfcpdbf.8 zipl-switch-to-blscfg.8 pvics.8
+FILE_MAN_PAGES = pvics.yaml.5
 
 all:
 
@@ -33,6 +34,12 @@ install:
 		$(DESTDIR)$(MANDIR)/man8; \
 	done
 
+	@for i in $(FILE_MAN_PAGES); \
+	do \
+		$(INSTALL) -g $(GROUP) -o $(OWNER) -m 644 $$i \
+		$(DESTDIR)$(MANDIR)/man5; \
+	done
+
 clean:
 
 .zfcpdbf.ct: zfcpdbf

scripts/dbginfo.sh

@@ -2,7 +2,7 @@
 #
 # dbginfo.sh - Tool to collect runtime, configuration, and trace information
 #
-# Copyright IBM Corp. 2002, 2025
+# Copyright IBM Corp. 2002, 2026
 #
 # s390-tools is free software; you can redistribute it and/or modify
 # it under the terms of the MIT license. See LICENSE for details.
@@ -14,7 +14,7 @@ export LC_ALL
 
 ########################################
 # Global used variables
-readonly SCRIPTNAME="${0##*/}" # general name of this script
+readonly SCRIPTNAME="${0##*/}" # current name of this script
 readonly FULLPATHSCRIPT="$(readlink -f "${0}")"
 #
 readonly DATETIME="$(date +%Y-%m-%d-%H-%M-%S 2>/dev/null)"
@@ -84,7 +84,7 @@ paramWORKDIR_BASE="/tmp"  # initial default path
 print_version() {
 	cat <<EOF
 ${SCRIPTNAME}: Debug information script version %S390_TOOLS_VERSION%
-Copyright IBM Corp. 2002, 2025
+Copyright IBM Corp. 2002, 2026
 EOF
 }
 
@@ -124,7 +124,7 @@ EOF
 }
 
 ########################################
-# check for oversize logfiles and missing rotation
+# check for oversized logfiles and missing rotation
 logfile_checker() {
 	local counter
 	local logfile
@@ -485,6 +485,7 @@ CMDS="uname -a\
   :lscpu -ye\
   :lscpumf -i\
   :lsmem\
+  :zmemtopo -t\
   :lsmod\
   :lsshut\
   :lsstp\

scripts/pvics.8

@@ -0,0 +1,340 @@
+.\" Copyright IBM Corp.
+.\" s390-tools is free software; you can redistribute it and/or modify
+.\" it under the terms of the MIT license. See LICENSE for details.
+.\"
+.TH PVICS 8 "April 2026" "s390-tools"
+
+.SH NAME
+pvics \- Convert qcow2 KVM guest images to EBC-ready SEL images
+
+.SH SYNOPSIS
+.B pvics
+.I ACTION
+.RB [ \-h | \-\-help ]
+.RB [ \-c | \-\-config
+.IR CONFIG_FILE ]
+.RB [ \-i | \-\-image
+.IR BASE_IMAGE ]
+
+.SH DESCRIPTION
+Use the \fBpvics\fR tool to convert existing QEMU Copy/-On/-Write version 2(qcow2) KVM
+guest images into images that are ready for Early Boot Customization (EBC) and Secure Execution for Linux (SEL).
+The tool encrypts the root file system and prepares all resources required for EBC.
+
+The tool operates on a copy of the original base image and performs operations
+in three main phases:
+.IP \(bu 2
+Retrieving information about a given base image
+.IP \(bu 2
+Converting a base image according to a configuration
+.IP \(bu 2
+Encrypting the root file system and preparing EBC resources
+
+All operations preserve the original base image. Logs are written to a
+temporary file, with the filename logged as the first message during runtime.
+Temporary artifacts are automatically cleaned up on completion or failure.
+
+.SH ACTIONS
+.TP
+.B list
+Retrieve information about a given base image. This action displays available
+boot loader entries from \fB/boot/loader/entries\fR, along with kernel and
+initramfs hashes and the kernel command line. This is useful for:
+.RS
+.IP \(bu 2
+Determining valid values for the \fBboot-loader-entry\fR configuration option
+.IP \(bu 2
+Comparing components between base and converted images
+.IP \(bu 2
+Verifying image contents before conversion
+.RE
+
+.TP
+.B convert
+Convert a base image according to the configuration file. This action:
+.RS
+.IP \(bu 2
+Fetches kernel, initramfs, and kernel command line from the specified boot
+loader entry
+.IP \(bu 2
+Builds a SEL image using \fBpvimg\fR(1)
+.IP \(bu 2
+Updates \fB/boot/bootmap\fR to boot into the SEL image
+.RE
+.IP
+The resulting image will be a SEL guest image. It requires encryption to be
+fully EBC-ready (unless \fBno-ebc\fR is enabled in the configuration).
+
+.TP
+.B encrypt
+Encrypt the root file system and prepare EBC resources. This action:
+.RS
+.IP \(bu 2
+Generates secure defaults (CCK, extension secret, LUKS keys) if not provided
+.IP \(bu 2
+Encrypts the root file system using LUKS with PAES
+.IP \(bu 2
+Populates \fB/boot/sics/\fR with add/-secret requests
+.IP \(bu 2
+Creates \fBtoc.pol\fR and \fBtoc.asr\fR for integrity protection
+.RE
+.IP
+This action requires EBC. The guest can boot only by using PAES to open the root file system.
+
+.TP
+.B full
+Perform both \fBconvert\fR and \fBencrypt\fR actions in sequence. This is
+equivalent to running \fBconvert\fR followed by \fBencrypt\fR, but in a single
+invocation.
+
+.SH ARGUMENTS
+.TP
+.I ACTION
+The action to perform: \fBlist\fR, \fBconvert\fR, \fBencrypt\fR, or \fBfull\fR.
+
+.SH OPTIONS
+.TP
+.BR \-h ", " \-\-help
+Display help message and exit.
+
+.TP
+.BR \-c ", " \-\-config " " \fICONFIG_FILE\fR
+Path to the YAML configuration file. See \fBpvics.yaml\fR(5) for the
+configuration file format and options.
+.br
+Required for \fBconvert\fR, \fBencrypt\fR, and \fBfull\fR actions.
+.br
+Not required for the \fBlist\fR action.
+
+.TP
+.BR \-i ", " \-\-image " " \fIBASE_IMAGE\fR
+Path to the base qcow2 image file to process. Required for all actions.
+
+.SH CONVERSION PROCESS
+The conversion process consists of three phases:
+
+.SS Component Fetching
+The tool retrieves the kernel, initramfs, and kernel command line from the
+boot loader entry specified in the configuration file. The components are
+validated to ensure they meet SEL EBC requirements.
+
+The tool prepends \fBrd.sel-ebc\fR to the kernel command line to trigger the
+SEL EBC dracut module (unless \fBno-ebc\fR is enabled) and appends any
+user-provided kernel parameters from the configuration.
+
+.SS SEL Image Build
+The SEL image is built using \fBpvimg\fR(1) with the fetched components.
+Additional options may be specified in the configuration file via
+\fB.convert.pvimg-create-options\fR.
+
+.SS Bootmap Update
+The tool updates the bootmap to boot into the new SEL image:
+.IP \(bu 2
+Existing boot loader entries in \fB/boot/loader/entries/*.conf\fR are renamed
+to \fB*.conf.old\fR
+.IP \(bu 2
+A new entry \fBsel-ebc.conf\fR is created that points to \fB/boot/sel-ebc.img\fR
+.IP \(bu 2
+\fBzipl\fR(8) is run to update the bootmap.
+
+The guest is temporarily started to update the bootmap using libvirt on z/Architecture
+or qemu on non-z/Architecture architectures. Failures are logged to
+\fB/var/log/sel-ebc-zipl.log\fR.
+
+.SH ENCRYPTION PROCESS
+The encryption process consists of three phases:
+
+.SS Secure Default Generation
+If not provided in the configuration, the following are generated from
+\fB/dev/random\fR:
+.IP \(bu 2
+Customer communication key (CCK)
+.IP \(bu 2
+Root file system LUKS encryption key
+.IP \(bu 2
+Extension secret for add/-secret requests
+.IP \(bu 2
+LUKS passphrase
+
+.SS Root File System Encryption
+The root file system is encrypted using the following steps:
+.IP 1. 3
+Resize the qcow2 image to accommodate the LUKS header
+.IP 2. 3
+Resize the root partition (but not the file system) to fit the LUKS header
+.IP 3. 3
+Encrypt the root file system using LUKS
+.IP 4. 3
+Reformat the LUKS header from AES to PAES (Protected AES)
+
+.SS AES to PAES Conversion
+The LUKS header is converted from standard AES encryption to protected AES (PAES).
+With PAES, encryption secrets are stored in the ultravisor secret store rather than directly in the LUKS header.
+
+.SS SICS Population
+The SEL Image Customization Source directory (\fB/boot/sics\fR) is populated
+with the following secrets as add/-secret requests:
+.IP \(bu 2
+Customer communication key (CCK)
+.IP \(bu 2
+LUKS encryption key
+.IP \(bu 2
+LUKS passphrase
+.IP \(bu 2
+Any additional add/-secret requests specified in the configuration
+
+All automatically built add/-secret requests are added to \fBtoc.pol\fR, which verifies the
+completeness of \fB/boot/sics\fR. User-supplied add/-secret requests from the configuration
+are also added. Finally, \fBtoc.asr\fR is built as a meta secret that links
+to \fBtoc.pol\fR for integrity protection.
+
+.SH BUILDING SEL IMAGES WITHOUT EBC
+While the primary purpose of \fBpvics\fR is to create EBC-ready SEL images with
+encrypted root file systems, it can also build SEL images without EBC
+functionality using the \fBno-ebc\fR configuration option.
+
+When \fBno-ebc: true\fR is set in the configuration:
+.IP \(bu 2
+The \fBconvert\fR action builds a SEL image without EBC-specific flags
+.IP \(bu 2
+The \fBencrypt\fR action is completely skipped
+.IP \(bu 2
+The \fBfull\fR action becomes equivalent to \fBconvert\fR only
+.IP \(bu 2
+The \fBrd.sel-ebc\fR kernel parameter is not added
+.IP \(bu 2
+\fB--enable-cck-update\fR and \fB--disable-image-encryption\fR flags are not
+passed to \fBpvimg\fR
+
+This mode is useful for:
+.IP \(bu 2
+Single-party image creation where the same entity performs conversion,
+customization, and encryption
+.IP \(bu 2
+Testing SEL guest functionality without EBC complexity
+.IP \(bu 2
+Development and debugging scenarios
+.IP \(bu 2
+Simplified SEL image generation workflows
+
+.SH OUTPUT FILES
+All output files are written to the directory specified by the \fBout\fR
+configuration option:
+
+.TP
+\fB<out>/image.qcow2\fR
+The converted SEL image (after \fBconvert\fR or \fBfull\fR action)
+
+.TP
+\fB<out>/cck.key\fR
+Customer communication key (generated if not provided)
+
+.TP
+\fB<out>/extension.secret\fR
+Extension secret for add/-secret requests (generated if not provided)
+
+.TP
+\fB<out>/rfs.key\fR
+Root file system LUKS encryption key (generated if not provided)
+
+.TP
+\fB<out>/passphrase\fR
+LUKS passphrase (generated if not provided)
+
+.TP
+\fB<out>/*.asr\fR
+Generated add-secret request files
+
+.SH TEMPORARY FILES
+.TP
+\fB/tmp/tmp.*\fR
+Log file (filename logged at startup)
+
+.SH EXIT STATUS
+.TP
+.B 0
+Success
+.TP
+.B 1
+General error (invalid arguments, missing files, operation failure)
+
+.SH EXAMPLES
+.SS List Boot Loader Entries
+.nf
+pvics list \-\-image /path/to/base-image.qcow2
+.fi
+
+.SS Convert Image Only
+.nf
+pvics convert \-\-config /path/to/config.yaml \-\-image /path/to/base-image.qcow2
+.fi
+
+.SS Encrypt Image Only
+.nf
+pvics encrypt \-\-config /path/to/config.yaml \-\-image /path/to/converted-image.qcow2
+.fi
+
+.SS Full Conversion and Encryption
+.nf
+pvics full \-\-config /path/to/config.yaml \-\-image /path/to/base-image.qcow2
+.fi
+
+.SS Build SEL Image Without EBC
+.nf
+# config.yaml contains: no-ebc: true
+pvics convert \-\-config /path/to/config.yaml \-\-image /path/to/base-image.qcow2
+.fi
+
+.SH FILES
+.TP
+\fB/boot/loader/entries/*.conf\fR
+Boot loader entry files in the base image
+
+.TP
+\fB/boot/sel-ebc.img\fR
+The resulting SEL image file in the guest
+
+.TP
+\fB/boot/sics/\fR
+SEL image-customization source directory that contains EBC resources
+
+.TP
+\fB/boot/sics/toc.pol\fR
+Table-of-contents policy file that lists all add/-secret requests
+
+.TP
+\fB/boot/sics/toc.asr\fR
+Meta secret for integrity protection of toc.pol
+
+.TP
+\fB/var/log/sel-ebc-zipl.log\fR
+Log file for zipl bootmap update operations
+
+.SH NOTES
+.IP \(bu 2
+All operations are performed on a copy of the original base image.
+.IP \(bu 2
+The tool requires root privileges for file-system operations.
+.IP \(bu 2
+The LUKS device is named \fBcryptroot\fR.
+.IP \(bu 2
+The temporary working directory is created at \fB/opt/sel-<UUID>\fR.
+.IP \(bu 2
+The \fBno-verify\fR option should not be used in production environments.
+.IP \(bu 2
+Generated secrets are written to the output directory and should be secured
+appropriately.
+
+.SH SEE ALSO
+.BR pvics.yaml (5),
+.BR pvsecret (1),
+.BR pvimg (1),
+.BR pvebc (8),
+.BR zipl (8),
+.BR cryptsetup (8),
+.BR lsinitrd (1)
+.PP
+Linux on IBM Z and IBM LinuxONE: Secure Execution for Linux documentation
+
+.SH AUTHOR
+IBM Corporation

scripts/pvics.yaml

@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: MIT
+#
+# Copyright IBM Corp.
+
+
+# OPTIONAL (default: false)
+no-verify: false
+# This option controls whether the --no-verify flag is used with the pv commands.
+
+# OPTIONAL (default: false)
+no-ebc: false
+# This option controls whether to trigger the SEL EBC related systemd units.
+# It can be used to create a SEL guest image from an existing qcow2 image without utilizing SEL EBC.
+# Setting this to true will prevent the encrypt action from running.
+# In this case, the full action equals the convert action.
+# Setting this to true will prevent the default pvimg options (see below) from being added and instead
+# only add the user provided ones in .convert.pvimg-options.
+
+# REQUIRED
+out: data/output
+# This specifies the local directory used for output.
+
+# REQUIRED
+hkds:
+  - data/*.hkd
+# These are the paths to all relevant Host-Key-Documents.
+# The paths may contain wildcard patterns.
+
+# REQUIRED if .no-verify is false
+# UNUSED if .no-verify is true
+# This section contains all relevant files for verification of the certificate chain.
+# See man pvsecret for more detailed information about any of the keys in this section.
+certificate-chain:
+  # The paths may contain wildcard patterns.
+  certs:
+    - data/*.cert
+
+  # The paths may contain wildcard patterns.
+  crls:
+    - data/*.crl
+
+  # This is the pvsecret create offline option.
+  offline: true
+
+  # This is the root CA of the given certificates.
+  root-ca: data/root.ca
+
+# This section contains relevant information for the first phase: conversion.
+convert:
+  # REQUIRED
+  boot-loader-entry: boot_loader_entry_title
+  # This is the boot loader entry name to be used for kernel, initramfs and kernel parameter.
+  # You can list available boot loader entries with the list action.
+
+  # OPTIONAL
+  sel-kernel-parameter: swiotlb=524288
+  # These are additional kernel parameters for the resulting SEL image.
+  # The parameter rd.sel-ebc will always be added.
+
+  # OPTIONAL (default: --enable-pckmo-hmac)
+  pvimg-create-options: --enable-pckmo-hmac
+  # These are additional pvimg options for the resulting SEL image.
+  # The options --disable-image-encryption and --enable-update-cck are always used except when .no-ebc is true.
+
+# This section contains relevant information for the second phase: encryption.
+encrypt:
+  # OPTIONAL
+  cck: data/cck.key
+  # This is the local path to the CCK.
+  # If none is supplied, one will be generated and written to .out/cck.key.
+
+  # OPTIONAL
+  extension-secret: data/extension.secret
+  # This is the local path to the extension secret for pvsecret create.
+  # This is REQUIRED if .encrypt.add-secret-requests is used.
+  # In this case, the extension secret must be the one from the supplied ASRs.
+  # If none is supplied, one will be generated and written to .out/extension.secret.
+
+  # OPTIONAL
+  luks-key: data/rfs.key
+  # This is the local path to the LUKS encryption key.
+  # If none is supplied, one will be generated and written to .out/rfs.key.
+
+  # OPTIONAL
+  luks-passphrase: data/passphrase
+  # This is the local path to a file containing the LUKS passphrase.
+  # If none is supplied, one will be generated and written to .out/passphrase.
+
+  # OPTIONAL (default: rfs-luks-key)
+  luks-key-asr-name: aes-xts-segment-key
+  # This is the name of the ASR containing the LUKS encryption key.
+
+  # OPTIONAL (default: depending on .encrypt.luks-key)
+  luks-key-size: 512
+  # This is the key size of the LUKS encryption key (256 or 512).
+  # If .encrypt.luks-key is supplied, this will default to a size depending on the key.
+  # Otherwise, this will default to 512 and generate a matching key.
+  # If this is supplied but no key is supplied, a key of the requested size will be generated.
+
+  # OPTIONAL
+  add-secret-requests:
+    - data/*.asr
+  # These are additional secrets to be added during boot.
+  # Using this will make .encrypt.extension-secret a required argument.
+  # The supplied extension secret and the extension secret of supplied ASRs must be the same.
+  # The paths may contain wildcard patterns.

scripts/pvics.yaml.5

@@ -0,0 +1,321 @@
+.\" Copyright IBM Corp.
+.\" s390-tools is free software; you can redistribute it and/or modify
+.\" it under the terms of the MIT license. See LICENSE for details.
+.\"
+.TH PVICS.YAML 5 "April 2026" "s390-tools"
+
+.SH NAME
+pvics.yaml \- Configuration file for pvics SEL EBC image conversion tool
+
+.SH DESCRIPTION
+The \fBpvics.yaml\fR file is a YAML-formatted configuration file used by the
+\fBpvics\fR tool to control the conversion of existing qcow2 KVM guest images
+to EBC-ready Secure Execution for Linux (SEL) images. The configuration file
+specifies parameters for image conversion, root file system encryption, and
+early boot customization (EBC) resource preparation.
+
+See \fBpvics\fR(8) for detailed information about the tool's actions and the
+conversion process.
+
+.SH FILE FORMAT
+The configuration file uses YAML syntax with the following top-level sections:
+.TP
+\fBGlobal Options\fR
+General settings that apply to all actions
+.TP
+\fBCertificate Chain\fR
+Certificate verification configuration
+.TP
+\fBConversion Options\fR
+Settings specific to the \fBconvert\fR action
+.TP
+\fBEncryption Options\fR
+Settings specific to the \fBencrypt\fR action
+
+.SH GLOBAL OPTIONS
+.TP
+\fBno-verify:\fR \fIboolean\fR
+Disables certificate chain verification for pv commands when set to true.
+Default: \fBfalse\fR.
+.br
+\fBWARNING:\fR Do not disable certificate chain verification in production environments.
+
+.TP
+\fBno-ebc:\fR \fIboolean\fR
+Controls whether EBC functionality is used. When set to
+\fBtrue\fR, a SEL guest image is created without using EBC.
+Default: \fBfalse\fR.
+.br
+When enabled:
+.RS
+.IP \(bu 2
+The \fBencrypt\fR action is skipped
+.IP \(bu 2
+The \fBfull\fR action behaves the same as the \fBconvert\fR action
+.IP \(bu 2
+Default \fBpvimg\fR options are not added; only user-provided options specified in
+\fB.convert.pvimg-create-options\fR are used
+.IP \(bu 2
+The \fBrd.sel-ebc\fR kernel parameter is not added
+.RE
+
+.TP
+\fBout:\fR \fIpath\fR
+\fB(REQUIRED)\fR Local directory path used for output files. All generated
+files (converted images, keys, ASRs) will be written to this directory.
+
+.TP
+\fBhkds:\fR \fIlist\fR
+\fB(REQUIRED)\fR List of paths to host-key-documents (HKDs). Paths may contain
+wildcard patterns, for example  \fBdata/*.hkd\fR.
+.br
+Example:
+.RS
+.nf
+hkds:
+  - data/*.hkd
+  - /path/to/specific.hkd
+.fi
+.RE
+
+.SH CERTIFICATE CHAIN
+The \fBcertificate-chain\fR section contains all relevant files for verification
+of the certificate chain. This section is \fBREQUIRED\fR if \fBno-verify\fR is
+\fBfalse\fR, and \fBUNUSED\fR if \fBno-verify\fR is \fBtrue\fR.
+
+See \fBpvsecret\fR(1) for more detailed information about certificate chain
+verification.
+
+.TP
+\fBcertificate-chain.certs:\fR \fIlist\fR
+List of paths to certificate files. Paths may contain wildcard patterns.
+.br
+Example:
+.RS
+.nf
+certs:
+  - data/*.cert
+.fi
+.RE
+
+.TP
+\fBcertificate-chain.crls:\fR \fIlist\fR
+List of paths to certificate revocation list (CRL) files. Paths may contain
+wildcard patterns.
+.br
+Example:
+.RS
+.nf
+crls:
+  - data/*.crl
+.fi
+.RE
+
+.TP
+\fBcertificate-chain.offline:\fR \fIboolean\fR
+Enables offline mode for the \fBpvsecret create\fR command. When \fBtrue\fR, no
+network access is attempted for certificate verification.
+
+.TP
+\fBcertificate-chain.root-ca:\fR \fIpath\fR
+Path to the root Certificate Authority (CA) file for the certificate chain.
+
+.SH CONVERSION OPTIONS
+The \fBconvert\fR section contains configuration options for the image
+conversion phase. These options are used only when running the \fBconvert\fR or
+\fBfull\fR actions and have no effect on other actions.
+
+.TP
+\fBconvert.boot-loader-entry:\fR \fIstring\fR
+\fB(REQUIRED)\fR Title of an existing boot loader entry from the base image.
+This entry specifies which kernel, initramfs, and kernel command line to use
+for the SEL image.
+.br
+Use the \fBlist\fR action to display available boot loader entries in the
+base image.
+
+.TP
+\fBconvert.sel-kernel-parameter:\fR \fIstring\fR
+\fB(OPTIONAL)\fR Additional kernel parameters to append to the kernel command
+line of the resulting SEL image. The \fBrd.sel-ebc\fR parameter is always
+prepended automatically (unless \fBno-ebc\fR is \fBtrue\fR).
+.br
+Example:
+.RS
+.nf
+sel-kernel-parameter: swiotlb=524288
+.fi
+.RE
+
+.TP
+\fBconvert.pvimg-create-options:\fR \fIstring\fR
+\fB(OPTIONAL)\fR Additional options to pass to the \fBpvimg\fR command during
+SEL image creation.
+.br
+See \fBpvimg\fR(1) for available options.
+
+.SH ENCRYPTION OPTIONS
+The \fBencrypt\fR section contains configuration options specific to the root filesystem
+encryption and EBC resource preparation phase. These options are only used when running
+the \fBencrypt\fR or \fBfull\fR actions and are ignored when \fBno-ebc\fR
+is \fBtrue\fR.
+
+.TP
+\fBencrypt.cck:\fR \fIpath\fR
+\fB(OPTIONAL)\fR Path to the customer communication key (CCK) file. If not
+supplied, a CCK will be generated from \fB/dev/random\fR and written to
+\fB<out>/cck.key\fR.
+
+.TP
+\fBencrypt.extension-secret:\fR \fIpath\fR
+\fB(OPTIONAL)\fR Path to the extension secret file used for \fBpvsecret create\fR
+commands. If not supplied, an extension secret will be generated from
+\fB/dev/random\fR and written to \fB<out>/extension.secret\fR.
+.br
+\fBREQUIRED\fR if \fBencrypt.add-secret-requests\fR is used. In this case, the
+extension secret must match the one used in the supplied add/-secret requests.
+
+.TP
+\fBencrypt.luks-key:\fR \fIpath\fR
+\fB(OPTIONAL)\fR Path to the LUKS encryption key file for the root filesystem.
+If not supplied, a key will be generated from \fB/dev/random\fR and written to
+\fB<out>/rfs.key\fR.
+
+.TP
+\fBencrypt.luks-passphrase:\fR \fIpath\fR
+\fB(OPTIONAL)\fR Path to a file that contains the LUKS passphrase. If not supplied,
+a passphrase will be generated from \fB/dev/random\fR and written to
+\fB<out>/passphrase\fR.
+
+.TP
+\fBencrypt.luks-key-asr-name:\fR \fIstring\fR
+\fB(OPTIONAL)\fR Name of the add-secret request that contains the LUKS
+encryption key. Default: \fBrfs-luks-key\fR.
+
+.TP
+\fBencrypt.luks-key-size:\fR \fIinteger\fR
+\fB(OPTIONAL)\fR Key size in bits for the LUKS encryption key. Valid values:
+\fB256\fR or \fB512\fR. If not specified, the size is determined from the
+supplied key file or a default size is used for generated keys.
+
+.TP
+\fBencrypt.add-secret-requests:\fR \fIlist\fR
+\fB(OPTIONAL)\fR List of paths to additional add/-secret request files to
+be added during boot. Paths may contain wildcard patterns.
+.br
+When using this option:
+.RS
+.IP \(bu 2
+\fBencrypt.extension-secret\fR is \fBREQUIRED\fR
+.IP \(bu 2
+The supplied extension secret must match the extension secret used in all
+supplied add/-secret requests
+.RE
+.br
+Example:
+.RS
+.nf
+add-secret-requests:
+  - data/*.asr
+  - /path/to/custom.asr
+.fi
+.RE
+
+.SH EXAMPLES
+.SS Minimal Configuration for EBC
+.nf
+out: /path/to/output
+hkds:
+  - /path/to/*.hkd
+certificate-chain:
+  certs:
+    - /path/to/*.cert
+  crls:
+    - /path/to/*.crl
+  offline: true
+  root-ca: /path/to/root.ca
+convert:
+  boot-loader-entry: "My Boot Entry"
+.fi
+
+.SS Configuration with Custom Encryption Keys
+.nf
+out: /path/to/output
+hkds:
+  - /path/to/*.hkd
+certificate-chain:
+  certs:
+    - /path/to/*.cert
+  crls:
+    - /path/to/*.crl
+  offline: true
+  root-ca: /path/to/root.ca
+convert:
+  boot-loader-entry: "My Boot Entry"
+  sel-kernel-parameter: swiotlb=524288
+  pvimg-create-options: --enable-pckmo-hmac
+encrypt:
+  cck: /path/to/cck.key
+  luks-key: /path/to/rfs.key
+  luks-passphrase: /path/to/passphrase
+  luks-key-size: 512
+.fi
+
+.SS Configuration with Additional ASRs
+.nf
+out: /path/to/output
+hkds:
+  - /path/to/*.hkd
+certificate-chain:
+  certs:
+    - /path/to/*.cert
+  crls:
+    - /path/to/*.crl
+  offline: true
+  root-ca: /path/to/root.ca
+convert:
+  boot-loader-entry: "My Boot Entry"
+encrypt:
+  extension-secret: /path/to/extension.secret
+  add-secret-requests:
+    - /path/to/*.asr
+.fi
+
+.SS SEL Image Without EBC
+.nf
+no-ebc: true
+out: /path/to/output
+hkds:
+  - /path/to/*.hkd
+convert:
+  boot-loader-entry: "My Boot Entry"
+.fi
+
+.SH FILES
+.TP
+\fB/boot/loader/entries/*.conf\fR
+Boot loader entry files in the base image
+.TP
+\fB/boot/sel-ebc.img\fR
+The resulting SEL image file
+.TP
+\fB/boot/sics/\fR
+SEL Image customization source directory containing EBC resources
+.TP
+\fB/boot/sics/toc.pol\fR
+Table of contents policy file listing all add/-secret requests
+.TP
+\fB/boot/sics/toc.asr\fR
+Meta-secret for integrity protection of toc.pol
+.TP
+\fB/var/log/sel-ebc-zipl.log\fR
+Log file for zipl bootmap update operations
+
+.SH SEE ALSO
+.BR pvics (8),
+.BR pvsecret (1),
+.BR pvimg (1),
+.BR zipl (8),
+.BR cryptsetup (8)
+.PP
+Linux on IBM Z and IBM LinuxONE: Secure Execution for Linux documentation

scripts/zfcpdbf

@@ -2,7 +2,7 @@
 #
 # zfcpdbf - Tool to interpret the information from logging/tracing sources
 #
-# Copyright IBM Corp. 2010, 2020
+# Copyright IBM Corp. 2010, 2026
 #
 # s390-tools is free software; you can redistribute it and/or modify
 # it under the terms of the MIT license. See LICENSE for details.
@@ -102,6 +102,7 @@ use POSIX qw(strftime floor difftime mktime);
 use File::Spec::Functions qw/catfile catdir rel2abs/;
 use File::Basename;
 use Getopt::Long;
+use List::Util qw(min);
 
 use constant TOD_UNIX_EPOCH => 0x7d91048bca000000;
 use constant STD_DEBUG_DIR => "/sys/kernel/debug/s390dbf/";
@@ -595,6 +596,9 @@ sub _print_hba_id1
 	my $rec_received = shift();
 	my $rec_issued;
 	my $pay_rec = $PAYLOAD_RECORDS{$fsf_req_id}{"fsf_res"};
+	my $plogi_length = hex(substr($rec, 112, 8));
+	my $prli_length  = hex(substr($rec, 120, 8));
+	my $els_rec = $PAYLOAD_RECORDS{$fsf_req_id}{"fsf_els"};
 
 	$rec_issued  = stck_to_timeval(substr($rec, 0, 16));
 
@@ -627,6 +631,19 @@ sub _print_hba_id1
 	print "QTCB log length: ", $payload_length, "\n" if ($payload_length);
 	print_payload($payload_length, $pay_rec, "QTCB log info")
 	    if ($payload_length);
+
+	if ($plogi_length) {
+		print "PLOGI length   : ", $plogi_length, "\n";
+		$plogi_length = min($plogi_length, 256);
+	}
+	if ($prli_length) {
+		print "PRLI length    : ", $prli_length, "\n";
+		$prli_length = min($prli_length, 256 - $plogi_length);
+	}
+	if ($plogi_length || $prli_length) {
+		print_payload($plogi_length + $prli_length, $els_rec,
+			      "PLOGI/PRLIinfo");
+	}
 }
 
 sub _print_hba_id2
@@ -641,8 +658,15 @@ sub _print_hba_id2
 	print "SRB D_ID       : 0x", substr($rec, 16, 8), "\n";
 	print "SRB LUN        : 0x", substr($rec, 24, 16), "\n";
 	print "SRB q-design.  : 0x", substr($rec, 40, 16), "\n";
+	print "SRB length     : 0x", substr($rec, 56, 8), "\n";
+	print "SRB res1       : 0x", substr($rec, 64, 8), "\n";
+	print "SRB res2       : 0x", substr($rec, 72, 2), "\n";
+	print "SRB class      : 0x", substr($rec, 74, 8), "\n";
+	print "SRB res3       : 0x", substr($rec, 82, 2), "\n";
+	print "SRB S_ID       : 0x", substr($rec, 84, 8), "\n";
+	print "SRB res4       : ", payload_format(substr($rec, 92, 40));
 
-	print "SRB length     : ", $payload_length, "\n" if ($payload_length);
+	print "SRB pay length : ", $payload_length, "\n" if ($payload_length);
 	print_payload($payload_length, $pay_rec, "SRB info")
 	    if ($payload_length);
 }
@@ -714,6 +738,19 @@ sub _print_hba_id5
 	print "FCES new       : 0x", substr($rec, 56, 8), "\n";
 }
 
+sub _print_hba_id6
+{
+	my $fsf_req_id = shift();
+	my $rec = shift();
+	my $payload_length = shift();
+	my $rec_received = shift();
+	my $rec_issued;
+
+	print "WWPN           : 0x", substr($rec, 0, 16), "\n";
+	print "LUN            : 0x", substr($rec, 16, 16), "\n";
+	print "Return Value   : 0x", substr($rec, 32, 8), "\n";
+}
+
 sub print_deferr_common
 {
 	my $rec = shift();
@@ -916,6 +953,7 @@ sub assign_callback_subs
 	$print_hba_id[2] = \&_print_hba_id2;
 	$print_hba_id[3] = \&_print_hba_id3;
 	$print_hba_id[5] = \&_print_hba_id5;
+	$print_hba_id[6] = \&_print_hba_id6;
 
 	$print_rec_id[1] = \&_print_rec_id1;
 	$print_rec_id[2] = \&_print_rec_id2;

tape390/Makefile

@@ -1,25 +0,0 @@
-include ../common.mak
-
-ALL_CPPFLAGS += -D_FILE_OFFSET_BITS=64
-
-all: tape390_display tape390_crypt
-
-tape390_display: tape390_display.o tape390_common.o
-
-tape390_crypt: tape390_crypt.o tape390_common.o
-
-install: all
-	$(INSTALL) -d -m 755 $(DESTDIR)$(BINDIR) $(DESTDIR)$(MANDIR)/man8
-	$(INSTALL) -g $(GROUP) -o $(OWNER) -m 755 tape390_display \
-		$(DESTDIR)$(BINDIR)
-	$(INSTALL) -g $(GROUP) -o $(OWNER) -m 644 tape390_display.8 \
-		$(DESTDIR)$(MANDIR)/man8
-	$(INSTALL) -g $(GROUP) -o $(OWNER) -m 755 tape390_crypt \
-		$(DESTDIR)$(BINDIR)
-	$(INSTALL) -g $(GROUP) -o $(OWNER) -m 644 tape390_crypt.8 \
-		$(DESTDIR)$(MANDIR)/man8
-
-clean:
-	rm -f *.o *~ tape390_display tape390_crypt core
-
-.PHONY: all install clean

tape390/tape390_common.c

@@ -1,86 +0,0 @@
-/*
- * tape_390 - Common functions
- *
- * Copyright IBM Corp. 2006, 2017
- *
- * s390-tools is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See LICENSE for details.
- */
-
-#include <fcntl.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/stat.h>
-#include <sys/sysmacros.h>
-
-#include "tape390_common.h"
-
-#define PROC_DEVICES_FILE "/proc/devices"
-#define PROC_DEVICES_FILE_WIDTH 100
-
-char *prog_name;        /* Name of tool */
-
-/*
- * Set name of tool
- */
-void set_prog_name(char *name)
-{
-	prog_name = name;
-}
-
-/*
- * Check whether specified device node is tape device
- */
-int is_not_tape(char *device)
-{
-	FILE* fh;
-	char line[PROC_DEVICES_FILE_WIDTH];
-	char last_line[PROC_DEVICES_FILE_WIDTH];
-	int found = 0;
-	struct stat stat_struct;
-
-	if (stat(device, &stat_struct)) {
-		ERRMSG("%s: Unable to get device status for "
-		       "'%s'. \n", prog_name, device);
-		perror("");
-		return 1;
-	}
-	fh = fopen(PROC_DEVICES_FILE,"r");
-	if (!fh) {
-		ERRMSG("%s: WARNING: Cannot check for tape in file "
-		       PROC_DEVICES_FILE ".\n", prog_name);
-		perror("");
-		return(0); /* check not possible, just continue */
-	}
-	while (!found && (fscanf(fh, "%s", line) != EOF)) {
-		if (strcmp(line, "tape") == 0)
-			found = 1;
-		else
-			strcpy(last_line, line);
-	}
-	fclose(fh);
-	if (found && (major(stat_struct.st_rdev) ==
-		      (unsigned int) atoi(last_line)))
-		return (0);
-	else {
-		ERRMSG("%s: '%s' is not a tape device. \n", prog_name, device);
-		return 1;
-	}
-}
-
-/*
- * Open the tape device
- */
-int open_tape(char *device)
-{
-	int fd;
-	fd = open(device,O_RDONLY);
-	if (fd < 0) {
-		ERRMSG("%s: Cannot open device %s.\n",
-		        prog_name,device);
-		perror("");
-		exit(EXIT_MISUSE);
-	}
-	return fd;
-}

tape390/tape390_common.h

@@ -1,22 +0,0 @@
-/*
- * tape_390 - Common functions
- *
- * Copyright IBM Corp. 2006, 2017
- *
- * s390-tools is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See LICENSE for details.
- */
-
-#ifndef _TAPE390_COMMON_H
-#define _TAPE390_COMMON_H
-
-#define ERRMSG(x...) {fflush(stdout);fprintf(stderr,x);}
-#define ERRMSG_EXIT(ec,x...) do {fflush(stdout);fprintf(stderr,x);exit(ec);} while(0)
-#define EXIT_MISUSE 1
-
-extern int is_not_tape(char *); 
-extern int open_tape(char *);
-extern void set_prog_name(char *);
-extern char *prog_name;
-
-#endif