s390-tools/zdump/zgetdump.8

.\" Copyright 2018 IBM Corp.
.\" s390-tools is free software; you can redistribute it and/or modify
.\" it under the terms of the MIT license. See LICENSE for details.
.\"
.TH ZGETDUMP 8 "April 2012" "s390-tools"
.SH NAME
zgetdump \- Tool for copying and converting System z dumps
.SH SYNOPSIS

\fBzgetdump\fR    DUMP [-s SYS] [-f FMT] > DUMP_FILE
.br
         -m DUMP [-s SYS] [-f FMT] DIR
.br
         -i DUMP [-s SYS]
.br
         -d DUMPDEV
.br
         -u DIR
.br
         -h|-v
.SH DESCRIPTION
The \fBzgetdump\fR tool copies a source dump into a target dump with a
configurable dump format. The source dump can be located either on a dump
device or on a file system. By default the source dump content is
written to standard output, which you can redirect to a specific file. You
can also mount the dump content, print dump information, check
whether a dump device contains a valid dump tool, or create a
non-disruptive dump on a live system.
.SH OPTIONS
.TP
.BR "\-h" " or " "\-\-help"
Print usage information, then exit.

.TP
.BR "\-v" " or " "\-\-version"
Print version information, then exit.

.TP
.BR "\-m <DUMP> <DIR>" " or " "\-\-mount <DUMP> <DIR>"
Mount the source dump DUMP to mount point DIR and generate a virtual target
dump file instead of writing the content to standard output. The virtual dump
file gets the name "dump.FMT", where FMT is the name of the specified
dump format (see "--fmt" option).

.TP
.BR "\-u <DIR>" " or " "\-\-umount <DIR>"
Unmount the dump that is mounted at mount point DIR. This option is a wrapper
for "fusermount -u". Instead of DIR also the DUMP (for example /dev/dasdd1)
can be specified.

.TP
.BR "\-d <DUMPDEV>" " or " "\-\-device <DUMPDEV>"
Check the dump disk DUMPDEV for a valid dump tool and print information
about it. See chapters DUMPDEV and DUMPDEV INFORMATION below for
more information.

.TP
.BR "\-i <DUMP>" " or " "\-\-info <DUMP>"
Print the dump header information reading from the DUMP and check if
the dump is valid. See chapters DUMP and DUMP INFORMATION below for more
information.

.TP
.BR "\-V" " or " "\-\-verbose"
Show the detailed memory map layout when printing the dump header
information (relevant for s390_ext and ELF dump formats).

.TP
.BR "\-f <FMT>" " or " "\-\-fmt <FMT>"
Use the specified target dump format FMT when writing or mounting the dump.
The following target dump formats are supported:

.BR "- elf:"
Executable and Linking Format core dump (default)

.BR "- s390:"
s390 dump

.TP
.BR "\-s <SYS>" " or " "\-\-select <SYS>"
If kdump fails and a stand-alone dump is created, the resulting dump captures
two systems: The crashed kdump system and the previously crashed Linux
instance. With the "--select" option you can choose which system data
to use:

.BR "- prod:"
Data for the initial crashed Linux instance

.BR "- kdump:"
Data for the crashed kdump system

.BR "- all:"
Data for the initial crashed Linux and kdump system

The "-s" option returns an error for dumps that capture only a single crashed system.

.TP
\fBDUMP\fR
This parameter specifies the file, partition or tape device node where the
source dump is located:
.IP "         -" 12
Regular dump file (e.g. /dumps/dump.0)
.IP "         -" 12
DASD partition device node (e.g. /dev/dasdc1)
.IP "         -" 12
DASD device node for multi-volume dump (e.g. /dev/dasdc)
.IP "         -" 12
Device mapper multipath partition device node of a FCP attached SCSI disk (e.g.
/dev/mapper/3600..20c0-part1)
.IP "         -" 12
Tape device node (e.g. /dev/ntibm0)
.IP "         -" 12
Device node for live system (/dev/mem or /dev/crash)
.PP
.IP  " " 8
Note: For DASD multi-volume dump it is sufficient to specify only one of the
multi-volume DASD partitions as DUMP.

.TP
\fBDUMPDEV\fR
When using the "--device" option, DUMPDEV must be the device node of
the dump disk that should be verified. This can be either a DASD device
node or a device mapper multipath device node of a FCP attached SCSI disk.

.SH COPY DUMP
The default action of zgetdump is to copy the source dump to standard output in
the target format specified by the \-\-fmt option. Read
the examples section below for more information.

.SH MOUNT DUMP
Use the "--mount" option to make a source dump accessible to tools that cannot
directly read the original dump format. Rather than creating a converted
copy of the dump, zgetdump creates a virtual dump file with the requested
target format. This is fast and does not consume any additional disk space.
Also multi-volume dumps can be assimilated into a single virtual dump file,
which can then be accessed directly with dump-processing tools like
makedumpfile or crash.

Specify a command of this form to mount and convert a dump:

.br
# zgetdump --mount <DUMP> <DIR>  --fmt <FMT>
.br

Where:
.TP
.BR DUMP
is the source dump or dump device
.TP
.BR DIR
is the mount point where the virtual dump file is created
.TP
.BR FMT
is the target dump format to which the virtual dump file is converted.
The resulting virtual dump file is <DIR>/dump.<FMT>
.P
The virtual dump file exists until the directory is unmounted.
Use zgetdump -u <DIR> to unmount a dump.

The zgetdump tool uses the file system in user space (fuse) to mount the source
dump. Therefore, the fuse kernel module must to be loaded before using
the "--mount" option.

Read the examples section below for more information.
.SH DUMP FORMATS
The default target format of zgetdump is "elf". Use the "--fmt" option to
change the target format. The following dump formats are supported for
target and source dump:
.TP
.BR "elf"
Executable and Linking Format core dump. This dump format is also used for
Linux user space core dumps.
.TP
.BR "s390"
This dump format is System z specific and is used for DASD and tape dumps.
.TP
The following dump formats are supported for the source dump only:
.TP
.BR "s390_ext"
This dump format is System z specific and is used for DASD dumps only.
.TP
.BR "lkcd"
This dump format is used by the Linux Kernel Crash Dumps (LKCD) project
and also on System z for the "vmconvert" dump tool.
.TP
.BR "devmem"
On live systems the /dev/mem or /dev/crash device nodes can be used as source
dumps for creating live dumps.
.TP
.BR "kdump" / "kdump_flat"
Dump formats created by the "makedumpfile" tool. For these formats only the
"--info" option can be used.

.SH DUMP INFORMATION
Depending on the dump format, the following dump attributes are available
when calling zgetdump with the "--info" option:
.TP
.BR "Dump format"
Name of the dump format.
.TP
.BR Version
Version number of the dump format.
.TP
.BR "Dump method"
Dump method that has been used to create the dump. Currently the only
supported value for this attribute is "live" which indicates that the
dump has been created from a live system and therefore is not consistent.
.TP
.BR "Dump created/ended"
Time when the dump process was started or ended. The dump time information is
printed in your local time zone. E.g. "Wed, 03 Feb 2010 10:47:37 +0100" shows
the time at your location. The meaning of "+0100" is that your time zone is one
hour behind GMT. You can use the "TZ" environment
variable or use the "tzselect" tool to change the time zone. For example, if you
know that the dump has been created in Hawaii, you can get the correct
time information with:
.br

# TZ='Pacific/Honolulu' zgetdump -i DUMP
.TP
.BR "Dump CPU ID"
Identifier of the CPU that ran the dump tool.
.TP
.BR "UTS node name"
The network node hostname of the Linux system.
.TP
.BR "UTS kernel release"
The kernel release of the Linux system.
.TP
.BR "UTS kernel version"
The kernel version of the Linux system.
.TP
.BR "Build arch"
Architecture (s390 or s390x) on which the dump tool was built.
.TP
.BR "System arch"
Architecture (s390 or s390x) of the Linux system.
.TP
.BR "CPU count (online)"
Number of online CPUs.
.TP
.BR "CPU count (real)"
Number of total CPUs (online and offline).
.TP
.BR "Dump memory range"
Memory range that was dumped. This value is the difference between the last
dumped and the first dumped memory address.
.TP
.BR "Real memory range"
Memory range that was available on the system. This value is the difference
between the last and the first memory address of the system on which the
dump was created.
The "real memory range" can differ from the "dump memory range" when
the SIZE parameter was used when preparing the dump device with the zipl
tool (see man zipl).
.TP
.BR "Dump file size"
Actual size of dump file on disk in megabytes. "Dump file size" may differ from
the "dump memory range" because of zero memory chunks.
.TP
.BR "Memory map"
Available memory chunks in the dump. Some dump tools create multiple memory
chunks when creating a dump on a system with memory gaps

.SH DUMPDEV INFORMATION
Depending on the dump tool, the following attributes are available
when calling zgetdump with the "--device" option:
.TP
.BR "Dump tool"
Name of the dump tool.
.TP
.BR "Version"
Version of the dump tool.
.TP
.BR "Architecture"
Architecture (s390 or s390x) of the dump tool.
.TP
.BR "DASD type"
Type of the DASD where the dump tool is installed (ECKD or FBA).
.TP
.BR "Dump size limit"
If this attribute is set, the dump tool will dump memory only up to that
limit even if there is more memory available.
.TP
.BR "Force specified"
If this attribute is set to "yes", the multi-volume DASD dump tool will not
verify the dump signature on dump partitions. This can be useful, if the dump
partition is also used for swap.
.TP
.BR "Partition info"
For SCSI partition dump, the partition number and the maximum dump size is
printed. The partition number corresponds to the output of
"parted /dev/sdx print" or "fdisk -l /dev/sdx".

.SH EXAMPLES
.TP
.B Copy single-volume DASD dump

The DASD partition /dev/dasdx1 was prepared for dump with:
.br

  # zipl -d /dev/dasdx1

.br
An IPL was performed on the corresponding single-volume dump tool and a dump
has been created. To copy the dump from the DASD partition to file dump.elf
issue:
.br

  # zgetdump /dev/dasdx1 > dump.elf

.TP
.B Copy multi-volume DASD dump

DASD partitions /dev/dasdx1 and /dev/dasdy1 contained in file dev_list.conf
were prepared for multi-volume dump with:
.br

  # zipl -M dev_list.conf

.br
An IPL was performed on the corresponding multi-volume dump tool and a dump
has been created. To copy the dump from the DASD partitions to file dump.elf
issue:
.br

  # zgetdump /dev/dasdx > dump.elf

.br
.TP
.B Copy SCSI dump

The device mapper multipath partition on a SCSI disk
/dev/mapper/3600..20c0-part1 was prepared for dump with:
.br

  # zipl -d /dev/mapper/3600..20c0-part1

.br
An IPL was performed on the corresponding dump tool and a dump
has been created. To copy the dump from the device mapper partition to file
dump.elf issue:
.br

  # zgetdump /dev/mapper/3600..20c0-part1 > dump.elf

.TP
.B Copy tape dump

Tape device /dev/ntibm0 was prepared with:
.br

  # zipl -d /dev/ntibm0

.br
An IPL was performed on the corresponding tape dump tool and a dump
has been created. To copy the dump from the tape to file dump.elf
issue:
.br

  # zgetdump /dev/ntibm0 > dump.elf

.br
.TP
.B Create live dump

To store an ELF-format dump from a live system in a file called dump.elf
issue:
.br

  # nice -n -20 zgetdump /dev/mem > dump.elf

.br
.TP
.B Using pipes for network transfer

You can redirect standard output to tools like ftp or ssh in order to
transfer the dump over the network without copying it into the file system
first.

Copy DASD dump using ssh:
.br

   # zgetdump /dev/dasdd1  | ssh user@host "cat > dump.elf"

.br
Copy and compress DASD dump using ftp and gzip (note that not all ftp clients
can do this):
.br

   # ftp host
   ftp> put |"zgetdump /dev/dasdd1 | gzip" dump.elf.gz

.br
The same effect can also be achieved by using the "--mount" option and run
scp or ftp directly on the mounted virtual dump file.

.TP
.B Using the "--mount" option

Mount a single-volume DASD dump as virtual ELF dump file, compress
it with the makedumpfile tool, and unmount it with zgetdump:
.br

  # zgetdump -m /dev/dasdc1 /dumps
  # makedumpfile -c -d 31 -x vmlinux.debug \\
       /dumps/dump.elf dump.kdump
  # zgetdump -u /dumps

.br
Mount a multi-volume DASD dump, process it with the "crash" tool, and
unmount it with fusermount:
.br

  # zgetdump -m /dev/dasdx /dumps
  # crash vmlinux /dumps/dump.elf
  # fusermount -u /dumps

.br
.TP
.B Print dump information (--info)

Print information about a DASD dump on /dev/dasdd1:
.br

  # zgetdump -i /dev/dasdd1

.br
Print information about a dump on a device mapper multipath partition device
node of a SCSI disk:
.br

  # zgetdump -i /dev/mapper/3600..20c0-part1

.br
.TP
.B Print dump tool information (--device)

Print information about a DASD dump tool on /dev/dasdd:
.br

  # zgetdump -d /dev/dasdd

.br
Print information about a dump tool on a SCSI multipath device:
.br

  # zgetdump -d /dev/mapper/3600..02c0

.br
.SH NOTES
The ELF dump format is not supported by the zgetdump tool under 31 bit.

While it is not recommended for reasons of recovery and redundancy, FCP
attached SCSI disks can also be accessed directly without multipathing,
for example via the "/dev/disk/by-path/" device nodes.

.SH SEE ALSO
.BR zipl (8), crash (8), makedumpfile (8), dumpconf (8), vmconvert (1), vmur (8)
.BR fdisk (8), parted (8)